Sparingly Used Demo Unit Digital Section: Maximum Input Data Rate: 24bit Data at 192Ks/s: 24bit Data at 96Ks/s: Master Clock jitter: Analog 24/192 DAC Section: Maximum Output: Output Impedance: Frequency Response: THD+N: Output Noise: Dynamic Range: Analog 24/192 ADC Section: Maximum Input: Input Impedance: Frequency Response: THD+N: Dynamic Range: Headphone Section: Maximum Output: THD+N: Output Noise: General: Power Usage On: Power Usage Off: Internally Set Operating Voltages: Dimensions: Weight: AES 1100hm XLR, SPDIF 750hm, TOSLINK USB 2picosecond RMS 4Vrms balanced XLR, 2Vrms RCA 200 ohms balanced XLR, 100 ohms RCA 20 Hz-20KHz, +/- 0.5dB <0.0015%, 4Vrms balanced out, 1KHz 3.3uVrms, A-weighted 20Hz-20KHz 122dB, A-weighted 20Hz-20KHz 2.5Vrms RCA 12K ohms RCA 20 Hz-20KHz, +/- 0.5dB 0.003%, 2.5Vrms in, 1KHz 110dB, A-weighted 20Hz-20KHz 138mW 0.0055% 35mW, 1KHz 17uVrms, A-weighted 20Hz-20KHz 8W 0.0W 100-120VAC or 230-240VAC 50/60 Hz 8.5 W x 12.5 D x 3.5 H (216 mm x 318 mm x 88 mm) 14lbs. (6.5 kg) Features and specifications are subject to improvements and changes without prior notice.

Sparingly Used Demo Unit Digital Section: Maximum Input Data Rate: 24bit Data at 192Ks/s: 24bit Data at 96Ks/s: Master Clock jitter: Analog 24/192 DAC Section: Maximum Output: Output Impedance: Frequency Response: THD+N: Output Noise: Dynamic Range: Analog 24/192 ADC Section: Maximum Input: Input Impedance: Frequency Response: THD+N: Dynamic Range: Headphone Section: Maximum Output: THD+N: Output Noise: General: Power Usage On: Power Usage Off: Internally Set Operating Voltages: Dimensions: Weight: AES 1100hm XLR, SPDIF 750hm, TOSLINK USB 2picosecond RMS 4Vrms balanced XLR, 2Vrms RCA 200 ohms balanced XLR, 100 ohms RCA 20 Hz-20KHz, +/- 0.5dB <0.0015%, 4Vrms balanced out, 1KHz 3.3uVrms, A-weighted 20Hz-20KHz 122dB, A-weighted 20Hz-20KHz 2.5Vrms RCA 12K ohms RCA 20 Hz-20KHz, +/- 0.5dB 0.003%, 2.5Vrms in, 1KHz 110dB, A-weighted 20Hz-20KHz 138mW 0.0055% 35mW, 1KHz 17uVrms, A-weighted 20Hz-20KHz 8W 0.0W 100-120VAC or 230-240VAC 50/60 Hz 8.5 W x 12.5 D x 3.5 H (216 mm x 318 mm x 88 mm) 14lbs. (6.5 kg) Features and specifications are subject to improvements and changes without prior notice.

The worlds largest online retailer of pre-owned audio Product DescriptionWho we areWhat we doOur ProcessOur Policies Bel Canto e.One DAC 1.7 / Headphone Amplifier; Silver Product SKU: 51708 Voltage: 120V # of Owners: 1 Service History: None Serial Number: D17-088 Age: 4 Years Tobacco Exposure: No Cosmetic Description: Excellent condition with no notable blemishes.  What is Included: DAC, Remote, Manual, Power cable, Factory packaging Other Notes: Designed with the core building blocks used in each Bel Canto DAC, the DAC1.7 is musical, clear and detailed in sound with excellent features. HDR Core is the result of 20+ years of engineering to refine the digital to analog process, and is comprised of 3 major components: Low Noise and Ultra Low Noise Master Clocks, Advanced Asynchronous Interfaces, and Dual Mode Low-Noise High Efficiency Power Supplies. -Absolute Hi-End Functional Notes: Operational condition of this item is excellent, fully tested and no issues found. Shipping: Cost to ship this item within the contiguous United States is a flat rate of $27- including packaging and insurance. For all other locations including Hawaii, Puerto Rico and Alaska, please request a quote prior to purchase. Items with factory packaging will be double boxed. When factory packaging not available re-usable shipping box with custom injected-foam mold will be used. (for all items over 10 lbs). Note that all items valued over $750 will require a signature upon delivery. Your online source for the best value in new and used audio gear. Visit us online to Buy / Sell / Trade / Consign The Music Room is the largest online retailer of pre-owned HiFi equipment in the world. Headquartered in beautiful Boulder Colorado, The Music Room is a team of 17 strong (and growing) music lovers - all dedicated to one singular mission: delivering the very best online shopping experience in the audio industry - period. We specialize in well-cared for, previously used gear because that is what we are passionate about. We feel that there is nothing more fulfilling than creating a high-performance system on a budget with carefully selected used components, speakers and cables. Our program is safe, secure, fast, fair, hassle-free and highly effective. Visit us online to Buy / Sell / Trade / Consign Buy: Are you looking to get a fair price for your used home audio equipment without all the hassles, headaches, risks and fees? We will appraise your equipment and make you a quick, easy, fair cash offer. Just fill out our “get a quote” form on our homepage to start the process. Sell: We sell in multiple online venues with many (but not all) of our products available in our eBay store. Everything is quality-assured and backed by our best-in-class, satisfaction-guaranteed return policy. Trade: Make your budget go further with a generous trade-in allowance. Let us know what you have available, and we’ll get you the best possible trade-in allowance. We can even assist with shipping & logistics from anywhere in the USA. Just fill out our “get a quote” form on our homepage to start the process. Consign: We offer a hassle-free way for individuals and businesses to liquidate used gear. We’ll handle every step of the process from shipping to appraisals, customer service, fulfillment, and returns: Industry-low rates with no hidden fees Leverage our world-class reputation and get exposure in multiple sales venues - putting your product in front of over 570k monthly shoppers. Our program is Safe, Secure, Fast, Fair, Hassle-Free and Highly Effective. With 100% feedback ratings in every venue in which we sell, you can rest assured that we’ve got your back. Visit us online to Buy / Sell / Trade / Consign Quality Assurance: We offer 15-20 new product listings for sale daily. Each product undergoes an extremely rigorous quality-assurance and listening session by one of our qualified technicians. We understand that buying used audio equipment can be rife with uncertainty and unexpected headaches. Our quality assurance program is informed by a knowledge-base built through delivering over 30,000 used audio products to satisfied customers. We promise to deliver your product in good working order - exactly as described 100% of the time. Support: We don’t just make promises. We stand behind them - your satisfaction is guaranteed. Our support team is ready to help you with any questions you might have before and after the sale. Value: In the never-ending pursuit of high performance, it’s important to stretch your limited budget as far as possible. Used equipment sells for a fraction of new prices, and with a partner like The Music Room you can upgrade any time you like and get most of your money back. There’s simply no better way to maximize a limited audio budget. Packaging: We’ve invested thousands of dollars and countless hours into mastering our state-of-the-art packaging process. Our custom foam-in-place packaging system allows us to safely package almost any item regardless of irregular shapes or sizes. Most importantly, this system provides our customers with a re-usable shipping box which increases the resale value of the product and provides a shipping method for easy, secure returns. Be seen by over 70,000 monthly visitors. Visit us online to Buy / Sell / Trade / Consign Payment: Prompt payment is expected. Paypal is preferred but all forms of payment are accepted. Unpaid item case will be opened after 3 days if no payment received. Shipping Times: Most Domestic orders ship within 1 business day of purchase. For International orders or freight shipments, please allow 2-3 business days. In all cases, tracking information will be emailed to you at the moment the shipping label is created. If you cant find it or have other questions about shipping & logistics, please contact us. Shipping Costs: Flat rate shipping costs are applicable within the contiguous 48 States (USA). These rates are clearly posted on each product page. For an International or custom quote (including Hawaii, PR, AK) please contact us. Returns: Every purchase made on eBay carries a 30-day, satisfaction-guaranteed return policy. If youre not happy with your purchase for any reason or if youve simply changed your mind... no problem. Simply ship it back for a full refund or exchange (minus S&H costs). If you have received an item that is defective in some way, we will make it right. Let us know - we will pay for return shipping and repair the item or refund 100% of your original purchase price.

Experience high-quality audio with the Bel Canto DAC 1.5. This silver DAC is designed for universal compatibility and is perfect for any home audio setup. With its easy-to-use remote and manual, you can enjoy music with convenience. *Remote control *Original Box *Power supply *Remote control

This is a Bel Canto digital to analog converter (DAC) which was very positively reviewed. Search Bel Canto DAC2 and read all about it! It listed for $1300 when new!This is my personal unit and I have really enjoyed it ....but have now focused on analog (records/vinyl) as my source. This unit comes with the power cord. A manual can be downloaded online from the belcantodesign web site.Feel free to ask me any questions, have a close look at the images and consider my 100% positive feedback as a seller!Comes from a temperature controlled, pet free, smoke free environment. I will only ship within the continental US and only to a street address (No PO box)Shipping by USPS priority mail!.... maybe still time to get it for the holidays? Returnable if description and images do not match item.Thanks for considering!

Bel Canto Dac2. Used DAC in very good condition. No physical flaws that I can see. Coax and Optical input. RCA output. Sounds fantastic. Nice soundstage (deeper than most). No power cord included. Well packed - double boxed. See my other related stuff.

Bel Canto E1X DAC / Control Preamp - Boxed with Remote & Manual. All in excellent condition and full working order. 220-240V Any questions re. discounts, shipping etc. - please call.Will be promptly sent via tracked courier delivery - or collect and save on the delivery charge Overseas bidders - please note you will be responsible for payment of any local duties and taxes upon import. Description: The new e1X line incorporates many ground-breaking designs from the Black series. Each e1X component is designed with great attention to detail, focusing on our unique input approach, DAC core performance and power amplifier technologies that optimise and maintain the purest signal quality. Built in a constrained layer damped chassis with high-grade aluminium defines the simple and elegant look.The new e1X DAC/Control Preamp, based around our High Dynamic Resolution HDR-II core and high-speed Asynchronous Multi-Input Processor (AMiP) platform is Bel Cantos most versatile DAC preamplifier.Stream music through Ethernet or USB, a full suite of digital inputs, line level inputs, dedicated subwoofer output where you can also independently insert a low pass filter into the subwoofer output to help control sub levels. The filters are adjustable anywhere from 40Hz to 120Hz (in increments of 10Hz), depending on the low-frequency extension of your main speakers and the size of your subwoofer. The provision of these high-pass and low-pass filters is far-sighted, as it enables far superior integration of your main speakers with your subwoofer than would otherwise be possible.The e1X also has a full MM/MC software controlled analog phono stage.Features include software controlled Trim, Bass EQ, and subwoofer filter management. Roon Ready or DLNA control with Bel Canto Seek iOS APP to stream Tidal/MQA, Qobuz or your personal library.The e1X also has fully optimised control for left and right balance adjustment, to enable you to fine tune the drive for the room perfectly.Stereophile ConclusionRereading my auditioning notes, I was struck by how difficult it had been to characterize the sound of the Bel Canto e1X DAC. It might use an almost two-decade–old DAC chip, but with its very high resolution, low noise, and equally low distortion—all confirmed in my measurements—this processor really doesnt have a sound of its own. Coupled with its versatile controls and its analog inputs, the e1X DAC is about as good as digital playback gets for a relatively affordable price.I was also impressed by both the measured performance and the sound quality of the line and phono analog inputs. And the preamplifiers versatile Tilt and Bass EQ controls proved to be a useful bonus in my auditioning of these inputs.Description/ Specs: Roon Ready streaming D/A processor/ preamplifier. Inputs: coaxial and TosLink optical S/PDIF (supports 16- and 24-bit PCM 44.1–192kHz); 10/100 Ethernet (supports 24-bit PCM up to 192kHz, MQA, and DSD64); USB2 (supports 24-bit PCM to 192kHz, MQA, and DSD64/128 in DoP format); and USB Type A port for use with external FAT32-formatted storage devices. Analog inputs: 2 pairs unbalanced line (RCA); 1 pair unbalanced MM/MC phono (RCA). Analog outputs: 1 pair balanced (XLR); 1 pair unbalanced (RCA); 1 pair unbalanced subwoofer (RCA); ¼ stereo headphone. Maximum output level: 5.5V RMS (balanced); 2.75V RMS (unbalanced); 4.5V (headphone; minimum load 32 ohms); 4.5V RMS with Bass Management (subwoofer). Analog input impedance: 10k ohms (line); 47k ohms (MM phono); 50, 100, 500, 1000 ohms (MC phono). Analog output impedance: 100 ohms (balanced; minimum load: 600 ohms); 100 ohms (unbalanced). Line input maximum input level: 2.2V RMS. Line input THD+N (1kHz): 0.003%. Line input dynamic range: 110dB, A-weighted 20Hz–20kHz. Phono input sensitivity: 2.5–5mV (MM); 0.25–0.5mV (MC). RIAA accuracy: 50Hz–15kHz, ±0.25dB. Phono input THD+N: <0.01% at 1kHz, A-weighted. Phono input S/N ratio: >70dB A-weighted. Supplied accessories: remote control, manual; Bel Canto Seek app is available for iOS devices. Dimensions: 17.75 (451mm) W × 15.75 (400mm) H × 3.25 (83mm) D. Weight: 14lb (6.4kg). Finish: Black-anodized aluminum

This DAC is in excellent condition and has been well-cared for and never subjected to abuse. It has only been used in smoke-free environments. We have used this in conjunction with the Pre3, but it also works beautifully as a stand-alone preamp/DAC. Having been used as a reference sample for our testing purposes, it does not have as much use on it as it would have had in a personal system. Includes VBS-1 power supply, remote, and 24/96 USB Light Link. The Bel Canto DAC3 represents a powerful statement in high performance audio data converters. Its superb audio performance and transparency renders it the modern standard in DAC design: • Ultra-Clock master reference clock provides superb dynamics, spatial resolution and accuracy of timbre • 125dB dynamic range ensures uncompromised audio quality • 5 digital inputs including AES, SPDIF-BNC, SPDIF-RCA, USB and TOSLINK • 4-layer PC board design for superior signal routing, grounding and power supply routing • Latest generation of low-noise, low distortion, high speed, class A biased, fully balanced audio circuits provide superb measured and subjective audio quality • Multi-stage power supplies for precise power to the sensitive analog and digital circuitry • Independent analog and digital power transformers and power supplies for optimum isolation and system grounding • Digital level control with 4.5Vrms balanced outputs for driving a power amp directly, providing the greatest system transparency and dynamic performance • Single-knob user user interface provides simple, intuitive control function • Dual stage de-jitter architecture ensures optimum jitter performance • 24/192 DAC operation and slow roll-off analog and digital filters for optimum phase performance, enhanced spatial imaging and natural harmonic structure • Select audio-grade passive components throughout analog current conversion, filtering and fully balanced output buffer section for best sonic performance • Full galvanic isolation on all digital inputs for optimum rejection of ground and common mode noise MSRP (including VBS1 Power Supply and 24/96 USB Light Link) $6295

BEL CANTO BRAND. MODEL DAC 1.1. SELLING ONLY THE ORIGINAL INSTRUCTION MANUAL & REVIEW SHEET. 8 PAGES. ENGLISH. NO EQUIPMENT INCLUDED IN THIS AUCTION++PLEASE BE AWARE SALES TAX MAYBE BE ADDED DEPENDING ON YOUR STATES POLICIES++ MADE IN USA. OPTION OF PRIORITY or GROUND SHIPPING. note USPS is taking longer these days to deliver packages. I OFFER NO GUARANTEE OR WARRANTY OFFERED. SELLING AS IS. NO REFUND OFFERED. ++I WILL COMBINE SHIPPING WHEN RELEVANT++local pick-up available. IF DAMAGED IN SHIPPING BUYER MUST MAKE A CLAIM WITH THE SHIPPER. NOT JUST USE EBAY FOR RETURN. INTERNATIONAL SHIPPING WOULD ONLY BE THRU EBAYS INTERNATIONAL SHIPPING PROGRAM. international bidders please make sure you are familiar with ebay international shipping before bidding +++COST TO BE DETERMINED BY EBAY+++. NO REFUND OFFERED. EMAIL WITH ANY QUESTION. BID AWAY!!

BEL CANTO BRAND. MODEL DAC 1.1. IT POWERS/LIGHTS UP BUT DOES NOT PASS SOUND. SELLING FOR PARTS/REPAIR/RESTORATION. IT COMES WITH THE ORIGINAL BOX WHICH IS MISSING SOME PACKING. ALSO INCLUDED IS THE ORIGINAL MANUAL. PURCHASE RECEIPT DATED 2002. RCA, OPTICAL & COAX HOOK-UP OPTIONS. NO AC CORD INCLUDED (FOR PICTURES ONLY). SERIAL NUMBER: D0020146A. PLEASE DO YOUR OWN RESEARCH FOR PROPER USE. USED NON-WORKING CONDITION. SUPER CLEAN. ++PLEASE BE AWARE SALES TAX MAYBE BE ADDED DEPENDING ON YOUR STATES POLICIES++ MADE IN USA. OPTION OF PRIORITY or GROUND SHIPPING. note USPS is taking longer these days to deliver packages. I OFFER NO GUARANTEE OR WARRANTY OFFERED. SELLING AS IS. NO REFUND OFFERED. ++I WILL COMBINE SHIPPING WHEN RELEVANT++local pick-up available. IF DAMAGED IN SHIPPING BUYER MUST MAKE A CLAIM WITH THE SHIPPER. NOT JUST USE EBAY FOR RETURN. INTERNATIONAL SHIPPING WOULD ONLY BE THRU EBAYS INTERNATIONAL SHIPPING PROGRAM. international bidders please make sure you are familiar with ebay international shipping before bidding +++COST TO BE DETERMINED BY EBAY+++. NO REFUND OFFERED. EMAIL WITH ANY QUESTION. BID AWAY!!

Bel Canto E1X DAC / Control Preamp - Boxed with Remote & Manual. All in excellent condition and full working order. 220-240V Any questions re. discounts, shipping etc. - please call.Will be promptly sent via tracked courier delivery - or collect and save on the delivery charge Overseas bidders - please note you will be responsible for payment of any local duties and taxes upon import. Description: The new e1X line incorporates many ground-breaking designs from the Black series. Each e1X component is designed with great attention to detail, focusing on our unique input approach, DAC core performance and power amplifier technologies that optimise and maintain the purest signal quality. Built in a constrained layer damped chassis with high-grade aluminium defines the simple and elegant look.The new e1X DAC/Control Preamp, based around our High Dynamic Resolution HDR-II core and high-speed Asynchronous Multi-Input Processor (AMiP) platform is Bel Cantos most versatile DAC preamplifier.Stream music through Ethernet or USB, a full suite of digital inputs, line level inputs, dedicated subwoofer output where you can also independently insert a low pass filter into the subwoofer output to help control sub levels. The filters are adjustable anywhere from 40Hz to 120Hz (in increments of 10Hz), depending on the low-frequency extension of your main speakers and the size of your subwoofer. The provision of these high-pass and low-pass filters is far-sighted, as it enables far superior integration of your main speakers with your subwoofer than would otherwise be possible.The e1X also has a full MM/MC software controlled analog phono stage.Features include software controlled Trim, Bass EQ, and subwoofer filter management. Roon Ready or DLNA control with Bel Canto Seek iOS APP to stream Tidal/MQA, Qobuz or your personal library.The e1X also has fully optimised control for left and right balance adjustment, to enable you to fine tune the drive for the room perfectly.Stereophile ConclusionRereading my auditioning notes, I was struck by how difficult it had been to characterize the sound of the Bel Canto e1X DAC. It might use an almost two-decade–old DAC chip, but with its very high resolution, low noise, and equally low distortion—all confirmed in my measurements—this processor really doesnt have a sound of its own. Coupled with its versatile controls and its analog inputs, the e1X DAC is about as good as digital playback gets for a relatively affordable price.I was also impressed by both the measured performance and the sound quality of the line and phono analog inputs. And the preamplifiers versatile Tilt and Bass EQ controls proved to be a useful bonus in my auditioning of these inputs.Description/ Specs: Roon Ready streaming D/A processor/ preamplifier. Inputs: coaxial and TosLink optical S/PDIF (supports 16- and 24-bit PCM 44.1–192kHz); 10/100 Ethernet (supports 24-bit PCM up to 192kHz, MQA, and DSD64); USB2 (supports 24-bit PCM to 192kHz, MQA, and DSD64/128 in DoP format); and USB Type A port for use with external FAT32-formatted storage devices. Analog inputs: 2 pairs unbalanced line (RCA); 1 pair unbalanced MM/MC phono (RCA). Analog outputs: 1 pair balanced (XLR); 1 pair unbalanced (RCA); 1 pair unbalanced subwoofer (RCA); ¼ stereo headphone. Maximum output level: 5.5V RMS (balanced); 2.75V RMS (unbalanced); 4.5V (headphone; minimum load 32 ohms); 4.5V RMS with Bass Management (subwoofer). Analog input impedance: 10k ohms (line); 47k ohms (MM phono); 50, 100, 500, 1000 ohms (MC phono). Analog output impedance: 100 ohms (balanced; minimum load: 600 ohms); 100 ohms (unbalanced). Line input maximum input level: 2.2V RMS. Line input THD+N (1kHz): 0.003%. Line input dynamic range: 110dB, A-weighted 20Hz–20kHz. Phono input sensitivity: 2.5–5mV (MM); 0.25–0.5mV (MC). RIAA accuracy: 50Hz–15kHz, ±0.25dB. Phono input THD+N: <0.01% at 1kHz, A-weighted. Phono input S/N ratio: >70dB A-weighted. Supplied accessories: remote control, manual; Bel Canto Seek app is available for iOS devices. Dimensions: 17.75 (451mm) W × 15.75 (400mm) H × 3.25 (83mm) D. Weight: 14lb (6.4kg). Finish: Black-anodized aluminum

This Bel Canto Design DAC 1 is a high-quality upsampling digital-to-analog converter that allows for enhanced audio quality. It is designed for use with Bel Canto Design products and is a sleek black color. The DAC 1 is made in the United States and features advanced upsampling technology to improve the sound quality of your music. It is a great addition to any home audio system and has a variety of useful features, including digital to analog conversion.

Bel Canto E1X DAC / Control Preamp - Boxed with Remote & Manual. All in excellent condition and full working order. 220-240V Any questions re. discounts, shipping etc. - please call.Will be promptly sent via tracked courier delivery - or collect and save on the delivery charge Overseas bidders - please note you will be responsible for payment of any local duties and taxes upon import. Description: The new e1X line incorporates many ground-breaking designs from the Black series. Each e1X component is designed with great attention to detail, focusing on our unique input approach, DAC core performance and power amplifier technologies that optimise and maintain the purest signal quality. Built in a constrained layer damped chassis with high-grade aluminium defines the simple and elegant look.The new e1X DAC/Control Preamp, based around our High Dynamic Resolution HDR-II core and high-speed Asynchronous Multi-Input Processor (AMiP) platform is Bel Cantos most versatile DAC preamplifier.Stream music through Ethernet or USB, a full suite of digital inputs, line level inputs, dedicated subwoofer output where you can also independently insert a low pass filter into the subwoofer output to help control sub levels. The filters are adjustable anywhere from 40Hz to 120Hz (in increments of 10Hz), depending on the low-frequency extension of your main speakers and the size of your subwoofer. The provision of these high-pass and low-pass filters is far-sighted, as it enables far superior integration of your main speakers with your subwoofer than would otherwise be possible.The e1X also has a full MM/MC software controlled analog phono stage.Features include software controlled Trim, Bass EQ, and subwoofer filter management. Roon Ready or DLNA control with Bel Canto Seek iOS APP to stream Tidal/MQA, Qobuz or your personal library.The e1X also has fully optimised control for left and right balance adjustment, to enable you to fine tune the drive for the room perfectly.Stereophile ConclusionRereading my auditioning notes, I was struck by how difficult it had been to characterize the sound of the Bel Canto e1X DAC. It might use an almost two-decade–old DAC chip, but with its very high resolution, low noise, and equally low distortion—all confirmed in my measurements—this processor really doesnt have a sound of its own. Coupled with its versatile controls and its analog inputs, the e1X DAC is about as good as digital playback gets for a relatively affordable price.I was also impressed by both the measured performance and the sound quality of the line and phono analog inputs. And the preamplifiers versatile Tilt and Bass EQ controls proved to be a useful bonus in my auditioning of these inputs.Description/ Specs: Roon Ready streaming D/A processor/ preamplifier. Inputs: coaxial and TosLink optical S/PDIF (supports 16- and 24-bit PCM 44.1–192kHz); 10/100 Ethernet (supports 24-bit PCM up to 192kHz, MQA, and DSD64); USB2 (supports 24-bit PCM to 192kHz, MQA, and DSD64/128 in DoP format); and USB Type A port for use with external FAT32-formatted storage devices. Analog inputs: 2 pairs unbalanced line (RCA); 1 pair unbalanced MM/MC phono (RCA). Analog outputs: 1 pair balanced (XLR); 1 pair unbalanced (RCA); 1 pair unbalanced subwoofer (RCA); ¼ stereo headphone. Maximum output level: 5.5V RMS (balanced); 2.75V RMS (unbalanced); 4.5V (headphone; minimum load 32 ohms); 4.5V RMS with Bass Management (subwoofer). Analog input impedance: 10k ohms (line); 47k ohms (MM phono); 50, 100, 500, 1000 ohms (MC phono). Analog output impedance: 100 ohms (balanced; minimum load: 600 ohms); 100 ohms (unbalanced). Line input maximum input level: 2.2V RMS. Line input THD+N (1kHz): 0.003%. Line input dynamic range: 110dB, A-weighted 20Hz–20kHz. Phono input sensitivity: 2.5–5mV (MM); 0.25–0.5mV (MC). RIAA accuracy: 50Hz–15kHz, ±0.25dB. Phono input THD+N: <0.01% at 1kHz, A-weighted. Phono input S/N ratio: >70dB A-weighted. Supplied accessories: remote control, manual; Bel Canto Seek app is available for iOS devices. Dimensions: 17.75 (451mm) W × 15.75 (400mm) H × 3.25 (83mm) D. Weight: 14lb (6.4kg). Finish: Black-anodized aluminum

Bel Canto e.One DAC 2.7 Control Preamp with Headphone Output (Black)STORE DEMO / FULL WARRANTYIncredible audio performance, features, and flexibility, the DAC2.7 is musically open, detailed, and natural sounding. HDR: High-Dynamic Resolution Core HDR Core is the result of 20+ years of engineering to refine the digital to analog process, and is comprised of 3 major components: Low Noise and Ultra Low Noise Master Clocks, Advanced Asynchronous Interfaces, and Dual Mode Low-Noise High Efficiency Power Supplies. HDR Core technology is fundamental to every e.One DAC and Integrated product, creating the most realistic, open, and defined musical experience possible. Built In Headphone Output This low-impedance, high-output headphone amp circuit has been designed to drive any pair of high quality headphones with pristine clarity. Youll be amazed at the musical depth they bring to your headset. Simple, Elegant Interface Designed to be functional and simple, the dual-functioning one knob interface is a joy to use. The programmable 8 character display works with it seamlessly to access all basic functions in a few clicks. The included 36 button infrared remote allows instant command functions and display editing. Asynchronous USB Input 24/192 Asynchronous input works with the internal dual Ultra Low Noise Femtosecond clocks to provide unprecedented audio sound quality and impact from your computer audio sources.FeaturesClass Leading 124dB Dynamic Range24 Bit Volume Control24/192 Asynchronous USB2.0Analog Input5 Asynchronous Digital InputsHigh Current Headphone Output DriverRemote ControlAvailable in Black or Silver FaceplateMAC USB 2.0 compatibility and custom Windows USB 2.0 driverSpecs:Digital Section24bit Data at 192KS/s: AES XLR, SPDIF BNC/RCA, TOSLINK, USBMaster Clock jitter: 70 femtoseconds RMS, 100Hz-1MHzAnalog 24/192 DAC SectionMaximum Output: 4.4Vrms balanced XLR, 2.2Vrms RCAOutput Impedance: 200 ohms balanced XLR, 100 ohms RCAFrequency Response: 20 Hz-20 KHz, +/- 0.5dBTHD+N: <0.0015%, 4Vrms balanced out, 1KHzOutput Noise: 3.3uVrms A-weighted 20Hz-20KHzDynamic Range: 124dB A-weighted 20Hz-20KHzAnalog 24/192 ADC SectionMaximum Output: 2.5 Vrms RCAInput Impedance: 12K ohms RCATHD+N: 0.003%, 2.5Vrms in, 1KHzDynamic Range: 110dB, A-weighted 20Hz-20KHzHeadphone SectionHeadphone Output Current and Voltage Level: 300mA peak at 4VrmsMaximum Output: 138mWTHD+N: 0.01% 35mW, 1KHzOutput Noise: 17uVrms, A-weighted 20Hz-20KHzGeneralPower Usage On: 7WPower Usage Off: 0.0WPower Requirement: 100-120VAC, 220-240VAC 50/60 HzDimensions: 8.5 W x 12.5 D x 3.5 H (216 mm x 318 mm x 88 mm)Weight: 14lbs. (6.5 kg) Check out all my items on the audiolab-outletBe sure to add me to your favorites list! PLEASE READ OUR POLICIES BELOW Payments:Payments must be made within 3 days of the sale of an item. Failure to pay within 3 days may result in cancellation of the sale OR an unpaid item case opened through eBay. IF YOU HAVE QUESTIONS, PLEASE MESSAGE US BEFORE BIDDING OR PURCHASING AN ITEM. Shipping:Shipping is to the confirmed address and will not be changed after the auction has ended. *** At this time we are NOT processing any shipments internationally or outside of the Lower Contiguous 48 States. AK & HI customers please inquire if you are interested in an item listed. Additional shipping may be required to process your order. We are also unable to ship our items to PO BOXES or APO/FPO addresses unless the item is small. Please inquire if you have any of these types of addresses *** Returns:ALL RETURNS MUST HAVE A RMA# FOR RETURN PROCESSING - Please contact us to obtain an RMA # We will accept items for return with 30 days of sale. Customers wishing to return product for any reasons other than the item being defective will be subject to paying for the cost of return shipping and a restocking fee. IN THE EVENT OF DAMAGE OR THE ITEM NOT AS DESCRIBED:Please contact us directly before opening any case or return request. We want to do everything in our power to offer the best Customer Service possible.

Bel Canto e.One DAC 2.7 Control Preamp with Headphone Output (Silver)STORE DEMO / FULL WARRANTYIncredible audio performance, features, and flexibility, the DAC2.7 is musically open, detailed, and natural sounding. HDR: High-Dynamic Resolution Core HDR Core is the result of 20+ years of engineering to refine the digital to analog process, and is comprised of 3 major components: Low Noise and Ultra Low Noise Master Clocks, Advanced Asynchronous Interfaces, and Dual Mode Low-Noise High Efficiency Power Supplies. HDR Core technology is fundamental to every e.One DAC and Integrated product, creating the most realistic, open, and defined musical experience possible. Built In Headphone Output This low-impedance, high-output headphone amp circuit has been designed to drive any pair of high quality headphones with pristine clarity. Youll be amazed at the musical depth they bring to your headset. Simple, Elegant Interface Designed to be functional and simple, the dual-functioning one knob interface is a joy to use. The programmable 8 character display works with it seamlessly to access all basic functions in a few clicks. The included 36 button infrared remote allows instant command functions and display editing. Asynchronous USB Input 24/192 Asynchronous input works with the internal dual Ultra Low Noise Femtosecond clocks to provide unprecedented audio sound quality and impact from your computer audio sources.FeaturesClass Leading 124dB Dynamic Range24 Bit Volume Control24/192 Asynchronous USB2.0Analog Input5 Asynchronous Digital InputsHigh Current Headphone Output DriverRemote ControlAvailable in Black or Silver FaceplateMAC USB 2.0 compatibility and custom Windows USB 2.0 driverSpecs:Digital Section24bit Data at 192KS/s: AES XLR, SPDIF BNC/RCA, TOSLINK, USBMaster Clock jitter: 70 femtoseconds RMS, 100Hz-1MHzAnalog 24/192 DAC SectionMaximum Output: 4.4Vrms balanced XLR, 2.2Vrms RCAOutput Impedance: 200 ohms balanced XLR, 100 ohms RCAFrequency Response: 20 Hz-20 KHz, +/- 0.5dBTHD+N: <0.0015%, 4Vrms balanced out, 1KHzOutput Noise: 3.3uVrms A-weighted 20Hz-20KHzDynamic Range: 124dB A-weighted 20Hz-20KHzAnalog 24/192 ADC SectionMaximum Output: 2.5 Vrms RCAInput Impedance: 12K ohms RCATHD+N: 0.003%, 2.5Vrms in, 1KHzDynamic Range: 110dB, A-weighted 20Hz-20KHzHeadphone SectionHeadphone Output Current and Voltage Level: 300mA peak at 4VrmsMaximum Output: 138mWTHD+N: 0.01% 35mW, 1KHzOutput Noise: 17uVrms, A-weighted 20Hz-20KHzGeneralPower Usage On: 7WPower Usage Off: 0.0WPower Requirement: 100-120VAC, 220-240VAC 50/60 HzDimensions: 8.5 W x 12.5 D x 3.5 H (216 mm x 318 mm x 88 mm)Weight: 14lbs. (6.5 kg) Check out all my items on the audiolab-outletBe sure to add me to your favorites list! PLEASE READ OUR POLICIES BELOW Payments:Payments must be made within 3 days of the sale of an item. Failure to pay within 3 days may result in cancellation of the sale OR an unpaid item case opened through eBay. IF YOU HAVE QUESTIONS, PLEASE MESSAGE US BEFORE BIDDING OR PURCHASING AN ITEM. Shipping:Shipping is to the confirmed address and will not be changed after the auction has ended. *** At this time we are NOT processing any shipments internationally or outside of the Lower Contiguous 48 States. AK & HI customers please inquire if you are interested in an item listed. Additional shipping may be required to process your order. We are also unable to ship our items to PO BOXES or APO/FPO addresses unless the item is small. Please inquire if you have any of these types of addresses *** Returns:ALL RETURNS MUST HAVE A RMA# FOR RETURN PROCESSING - Please contact us to obtain an RMA # We will accept items for return with 30 days of sale. Customers wishing to return product for any reasons other than the item being defective will be subject to paying for the cost of return shipping and a restocking fee. IN THE EVENT OF DAMAGE OR THE ITEM NOT AS DESCRIBED:Please contact us directly before opening any case or return request. We want to do everything in our power to offer the best Customer Service possible.

This Bel Canto e.One Series C5i DAC Integrated Amplifier is an ex-demo item. The amplifier has been well cared for whilst in our showroom and is in excellent condition showing minimal signs of use with the exception of a small blemish on the bottom right corner of the front panel (shown in images). Comes complete with original manufacturers packaging and accessories. For additional information please contact us. * The C5i Integrated Amplifier is simplicity and musicality in one compact chassis that controls all of your sources, is versatile, and easy to use.5 Digital InputsAnalog In/Line OutMM Phono StageQuality Headphone Ouput24/96 USB1.1 Input24 Bit Volume ControlRemote ControlAvailable in Silver or Black Faceplate HDR Core is the result of 20+ years of engineering to refine the digital to analog process, and is comprised of 3 major components: Low Noise and Ultra Low Noise Master Clocks, Advanced Asynchronous Interfaces, and Dual Mode Low-Noise High Efficiency Power Supplies. HDR Core technology is fundamental to every e.One DAC and Integrated product, creating the most realistic, open, and defined musical experience possible. Built In Headphone Output: The dedicated low-impedance, high-output headphone amp circuit has been designed to drive high quality headphones with pristine clarity. Youll be amazed at the musical depth they bring to your headset. Simple, Elegant Interface: ?Designed to be functional and simple, the dual-functioning one knob interface is a joy to use. The single 4 digit display works with it seamlessly to access all basic functions in a few clicks. The included 36 button infrared remote allows instant command functions and display editing. SPECIFICATIONS Amplifier Section:Power Output 1% THD: 120W 4 ohms, 60W 8 ohms per channelMinimum Load: 3 ohms per channelPeak Output Current: 30 amperesFrequency Response: +/-3 dB 1.5Hz-90KHz, 4 ohm loadTHD+N: 0.003% 1W, 1KHz, 4 ohmsIMD (CCIF): 0.0003%, 1W, 14:15KHz, 4 ohmsOutput Noise: <50uVRMS A-weighted 10Hz-20KHzDamping factor: >1000Output Impedance at 100Hz: <8 milliohmsDynamic Range: 115dB Digital Inputs:Maximum Data Input Rate24bit Data at 192KS/s: SPDIF RCA x2, TOSLINK x224bit Data at 96KS/s: USB Analog Inputs:Line in impedance: 11 KohmsPhono in impedance: 47 Kohms//150pFPhono accuracy: +/-0.5dB, 50Hz-15kHz General:Output connections: 2-sets of WBT NextGen Binding Posts, RCA Line Out, Headphone OutputHeadphone Output Current and Voltage Level: 300mA peak at 4VrmsPower On usage: 14WPower Off usage: 0.0WInternally Set Operating Voltages: 100-120VAC or 230-240VAC 50/60 HzSize: 8.5 x 3.5 x 12?, 216 x 88 x 305mm (W x H x D)Weight:13lbs, 6.5KgFeatures and specifications are subject to improvements and changes without prior notice.

Bel Canto DAC 2.5 in excellent condition, with original remote and packaging.