Motherboard TV Blaupunkt 40/233I-GB-8B-FHBKUP-EU TP.MSD309.BP710 B15020830-1A00183 V400HJ6-PE1Original, Garantie 6 mois Prestalia e-commerce solutions.

BLAUPUNKT 32/133I-WB-5B2-HBKUP-EU STUCK IN STANDBY? FLASH IC UF11 TP.MSD309.BP85 PLEASE NOTE THIS ISNT THE MAIN BOARD FOR SALE BUT THE FLASH IC UF11 FOR THE MAIN BOARD!As a result of some people abusing the returns process on ebay I will no longer be selling the programmed spi flash ics for TVs as new other, they will now be sold as spares and repairs. I have had people think they are buying a whole new TV board for £10 and 80p for first class delivery! This I will not tolerate when they cannot be bothered to read the listing details and then ask for a return for there own incompetent mistake! I suggest you look at my feedback for the programmed spi flash ics and make your own mind up. Until ebay does something about this then this is the only way to combat this! Sorry to the majority of buyers but I am sure you will understand.If your Blaupunkt 32/133I-WB-5B2-HBKUP-EU led TV has a corrupted flash ic it can suffer from one of the following symptoms: Stuck on standby, constantly on the channel search, screen image upside down, strange colours on the screen, plus various other issues (if your unsure as to your symptom contact me for further clarification). Simple solution is to replace the SPI Flash ic UF11 with the programmed chip supplied. Once programmed it will be verified that the correct data has been written into the flash ic, this ensures 100% correct data write to the flash IC. This is suitable for the following LED sets: Blaupunkt 32-133I-WB-5B2-HBKUP-EU Main Board TP.MSD309.BP85 Screen Model number suitable for this SPI flash ic is: LC.4U303.001 LSC320AN02 After fitting the kit carry out a Master Reset on the TV by entering the TV Menu. This will then retune the Freeview Channels and set the Country code. Soldering skills are required to remove the spi flash from the PCB without causing damage to any of the surface mount components and to solder the supplied SPI Flash IC. All responsibility is down to you and no liability will be taken for fitting it incorrectly or any damage as a result of fitting it. Please ensure when fitting the ic that the correct orientation of the IC so that the very small dimple is at pin 1 (ask if you are unsure as to the correct way round the ic should be fitted). Good soldering skills are required to fit this SPI Flash IC, if you dont feel capable get someone suitably competent to carry out the procedure. All my items are despatched promptly which is normally same day despatch. Any questions ask away.

Blaupunkt 40/191i-GB-5B-FHBKU-EU STUCK IN STANDBY? FLASH IC UF11 T.MSD309.B81C 12176 SENT FASTPLEASE NOTE THIS ISNT THE MAIN BOARD FOR SALE BUT THE FLASH IC FOR THE MAIN BOARD!As a result of some people abusing the returns process on ebay I will no longer be selling the programmed spi flash ics for TVs as new other, they will now be sold as spares and repairs. I have had people think they are buying a new TV board for £10 and 80p delivery for first class! This I will not tolerate when they cannot be bothered to read the listing details and then ask for a return for there own incompetent mistake! I suggest you look at my feedback for the programmed spi flash ics and make your own mind up. Until ebay does something about this then this is the only way to combat this! Sorry to the majority of buyers but I am sure you will understand.If your Blaupunkt 40/191i-GB-5B-FHBKU-EU TV has a corrupted flash ic it can suffer from one of the following symptoms: Stuck on standby, constantly on the channel search, screen image upside down, strange colours on the screen, plus various other issues (if your unsure as to your symptom contact me for further clarification). Simple solution is to replace the SPI Flash ic UF11 with the programmed chip supplied. Once programmed the flash ic will be verified with the programmed data. This is only suitable for the following models Blaupunkt 40/191i-GB-FHBKU-EU or Blaupunkt 40/191i-GB-FHBKU-UK TV with main board number T.MSD309.B81C 12176 with screen LTA400HM21. Please ensure your leds are fully functional as this TV also suffers from the LEDS failing resulting in no backlight and no image on the screen. Soldering skills are required to remove the spi flash from the PCB without causing damage to any of the surface mount components and to solder the supplied SPI Flash IC smd component. All responsibility is down to you and no liability will be taken for fitting it incorrectly or any damage as a result of fitting it. Please ensure when fitting the ic that the correct orientation of the IC so that the very small dimple is at pin 1 (ask if you are unsure as to the correct way round the ic should be fitted).Good soldering skills are required to fit this SMD (Surface Mount Device) SPI Flash IC, if you dont feel capable get someone suitably competent to carry out the procedure. All my items are despatched promptly which is normally same day despatch.Any questions ask away.

BLAUPUNKT 39/224I-GB-5B-FHBKUP-UK TP.MSD309.BP85 C12415 STUCK IN STANDBY REPAIR IC UF11 PLEASE NOTE THIS ISNT THE MAIN BOARD FOR SALE BUT IT IS FOR ONE FLASH IC UF11 FOR THE MAIN BOARDAs a result of some people abusing the returns process on ebay I will no longer be selling the programmed spi flash ics for TVs as new other, they will now be sold as spares and repairs. I have had people think they are buying a new TV board for £10 and 80p delivery for first class! This I will not tolerate when they cannot be bothered to read the listing details and then ask for a return for there own incompetent mistake! I suggest you look at my feedback for the programmed spi flash ics and make your own mind up. Until ebay does something about this then this is the only way to combat this! Sorry to the majority of buyers but I am sure you will understand.If your Blaupunkt 39/224I-GB-5B-FHBKUP-UK LED TV is stuck in standby or reboots constantly, continually on channel search, different colours on screen or up side down picture then the SPI Flash could have been corrupted. Simple solution replace SPI Flash ic UF11 with the programmed chip supplied. This is suitable for the following LED sets: Blaupunkt 39inch led tv 39/224I-GB-5B-FHBKUP-UK or Blaupunkt 39/224I-GB-5B-FHBKUP-EU Main Board TP.MSD309.BP85 C12415 Screen number suitable for this SPI FLASH EPROM V390HJ1-LE1 IF YOUR SCREEN MODEL NUMBER AND TV MODEL DOESNT MATCH EXACTLY THEN PLEASE DONT PURCHASE IT! IT WILL NOT WORK OTHERWISE! Soldering skills are required to remove the spi flash from the PCB without causing damage to any of the surface mount components and to solder the supplied SPI Flash IC. After fitting the programmed spi flash ic you will need to carry out a First time installation of the TV to get all the Freeview channels for your country and location. All responsibility is down to you and no liability will be taken for fitting it incorrectly or any damage as a result of fitting it. Good soldering skills are required to fit this SPI Flash IC, if you dont feel capable get someone suitably competent to carryout the procedure. All my items are despatched promptly which is normally same day despatch. Any questions ask away.

BLAUPUNKT 32/133I-WB-5B2-HBKUP-EU STUCK IN STANDBY? FLASH IC UF11 TP.MSD309.BP85 PLEASE NOTE THIS ISNT THE MAIN BOARD FOR SALE BUT THE FLASH IC UF11 FOR THE MAIN BOARD!As a result of some people abusing the returns process on ebay I will no longer be selling the programmed spi flash ics for TVs as new other, they will now be sold as spares and repairs. I have had people think they are buying a whole new TV board for £10 and 80p for first class delivery! This I will not tolerate when they cannot be bothered to read the listing details and then ask for a return for there own incompetent mistake! I suggest you look at my feedback for the programmed spi flash ics and make your own mind up. Until ebay does something about this then this is the only way to combat this! Sorry to the majority of buyers but I am sure you will understand.If your Blaupunkt 32/133I-WB-5B2-HBKUP-EU led TV has a corrupted flash ic it can suffer from one of the following symptoms: Stuck on standby, constantly on the channel search, screen image upside down, strange colours on the screen, plus various other issues (if your unsure as to your symptom contact me for further clarification). Simple solution is to replace the SPI Flash ic UF11 with the programmed chip supplied. Once programmed it will be verified that the correct data has been written into the flash ic, this ensures 100% correct data write to the flash IC. This is suitable for the following LED sets: Blaupunkt 32-133I-WB-5B2-HBKUP-EU Main Board TP.MSD309.BP85 Screen Model number suitable for this SPI flash ic is: LC.4U303.001 LSC320AN02 After fitting the kit carry out a Master Reset on the TV by entering the TV Menu. This will then retune the Freeview Channels and set the Country code. Soldering skills are required to remove the spi flash from the PCB without causing damage to any of the surface mount components and to solder the supplied SPI Flash IC. All responsibility is down to you and no liability will be taken for fitting it incorrectly or any damage as a result of fitting it. Please ensure when fitting the ic that the correct orientation of the IC so that the very small dimple is at pin 1 (ask if you are unsure as to the correct way round the ic should be fitted). Good soldering skills are required to fit this SPI Flash IC, if you dont feel capable get someone suitably competent to carry out the procedure. All my items are despatched promptly which is normally same day despatch. Any questions ask away.

BLAUPUNKT 40/133I-WB-5B-FHBKUP-EU TP.MSD309.BP85 STUCK IN STANDBY FLASH IC UF11 PLEASE NOTE THIS ISNT THE MAIN BOARD FOR SALE BUT THE FLASH IC FOR THE MAIN BOARD!As a result of some people abusing the returns process on ebay I will no longer be selling the programmed spi flash ics for TVs as new other, they will now be sold as spares and repairs. I have had people think they are buying a new TV board for £10 and 80p delivery for first class! This I will not tolerate when they cannot be bothered to read the listing details and then ask for a return for there own incompetent mistake! I suggest you look at my feedback for the programmed spi flash ics and make your own mind up. Until ebay does something about this then this is the only way to combat this! Sorry to the majority of buyers but I am sure you will understand. If your BLAUPUNKT 40/133I-WB-5B-FHBKUP-EU TV has a corrupted flash ic it can suffer from one of the following symptoms: Stuck on standby, constantly on the channel search, screen image upside down, strange colours on the screen, plus various other issues (if your unsure as to your symptom contact me for further clarification). Simple solution is to replace the SPI Flash ic UF11 with the programmed chip supplied. Once programmed it will be verified that the correct data has been written into the flash ic, this ensures 100% correct data write to the flash IC. This is suitable for the following LED set: Blaupunkt 40inch led tv 40/133I-WB-5B-FHBKUP-EU or 40/133I-WB-5B-FHBKUP-UK Main Board TP.MSD309.BP85 Screen model numbers suitable for this Blaupunkt 40/133I-WB-5B-FHBKUP-EU LSC400HM06 or LSC400HM09 IF YOUR SCREEN PANEL MODEL NUMBER AND TV MODEL DOESNT MATCH EXACTLY THEN PLEASE DONT PURCHASE IT! IT WILL NOT WORK OTHERWISE! They do a few screen models for this TV so please check before purchasing as it is essential! Soldering skills are required to remove the SMD spi flash from the PCB without causing damage to any of the surface mount components and to solder the supplied SMD SPI Flash IC. All responsibility is down to you and no liability will be taken for fitting it incorrectly or any damage as a result of fitting it. Good soldering skills are required to fit this SMD SPI Flash IC, if you dont feel capable get someone suitably competent to carry out the procedure. All my items are despatched promptly which is normally same day despatch. Any questions ask away.

STUCK IN STANDBY SPI FLASH IC UF11 FOR BLAUPUNKT 32/147I-GB-5B-HBKUP-UK TP.MSD309.BP85 PLEASE NOTE THIS ISNT THE MAIN BOARD FOR SALE BUT THE FLASH IC FOR THE MAIN BOARD!As a result of some people abusing the returns process on ebay I will no longer be selling the programmed spi flash ics for TVs as new other, they will now be sold as spares and repairs. I have had people think they are buying a new TV board for £10 and 80p delivery for first class! This I will not tolerate when they cannot be bothered to read the listing details and then ask for a return for there own incompetent mistake! I suggest you look at my feedback for the programmed spi flash ics and make your own mind up. Until ebay does something about this then this is the only way to combat this! Sorry to the majority of buyers but I am sure you will understand.If your Blaupunkt 32/147I-GB-5B-HBKUP-UK or Blaupunkt 32/147I-GB-5B-HBKUP-EU LED TV is stuck in standby or reboots constantly, continually on channel search, different colours on screen or up side down picture then the SPI Flash could have been corrupted. Simple solution replace the SPI Flash ic UF11 with the programmed chip supplied. This is suitable for the following LED sets: Blaupunkt 32inch led tv 32/147I-GB-5B-HBKUP-EU or the Blaupunkt 32/147I-GB-5B-HBKUP-UK Main Board TP.MSD309.BP85 Screen numbers suitable for this UF11 SPI Flash ic:LVW320LGDX E3 V1 or V2 and LC320DXJ-SF E1 IF YOUR SCREEN MODEL NUMBER AND TV MODEL DOESNT MATCH EXACTLY THEN PLEASE DONT PURCHASE IT! IT WILL NOT WORK OTHERWISE! Soldering skills are required to remove the spi flash from the PCB without causing damage to any of the surface mount components and to solder the supplied SPI Flash IC. All responsibility is down to you and no liability will be taken for fitting it incorrectly or any damage as a result of fitting it. Good soldering skills are required to fit this SPI Flash IC, if you dont feel capable get someone suitably competent to carry out the procedure. All my items are despatched promptly which is normally same day despatch. Any questions ask away.

BLAUPUNKT 32/147I-GB-5B-FHBKU-EU STUCK IN STANDBY? SPI FLASH IC UF11 TP.MSD309.BP85 PLEASE NOTE THIS ISNT THE MAIN BOARD FOR SALE BUT THE FLASH IC UF11 FOR THE MAIN BOARD!As a result of some people abusing the returns process on ebay I will no longer be selling the programmed spi flash ics for TVs as new other, they will now be sold as spares and repairs. I have had people think they are buying a whole new TV board for £10 and 80p for first class delivery! This I will not tolerate when they cannot be bothered to read the listing details and then ask for a return for there own incompetent mistake! I suggest you look at my feedback for the programmed spi flash ics and make your own mind up. Until ebay does something about this then this is the only way to combat this! Sorry to the majority of buyers but I am sure you will understand.If your Blaupunkt 32/147I-GB-5B-FHBKU-EU led TV has a corrupted flash ic it can suffer from one of the following symptoms: Stuck on standby, constantly on the channel search, screen image upside down, strange colours on the screen, plus various other issues (if your unsure as to your symptom contact me for further clarification). Simple solution is to replace the SPI Flash ic UF11 with the programmed chip supplied. Once programmed it will be verified that the correct data has been written into the flash ic, this ensures 100% correct data write to the flash IC. This is suitable for the following LED sets: Blaupunkt 32inch led tv Blaupunkt 32/147I-GB-5B-FHBKU-EU Main Board TP.MSD309.BP85 Screen number suitable for this SPI flash ic is: LVF320SSDX E1 V1 32H2FHD After fitting the kit carry out a Master Reset on the TV by entering the TV Menu. This will then retune the Freeview Channels and set the Country code. Soldering skills are required to remove the spi flash from the PCB without causing damage to any of the surface mount components and to solder the supplied SPI Flash IC. All responsibility is down to you and no liability will be taken for fitting it incorrectly or any damage as a result of fitting it. Please ensure when fitting the ic that the correct orientation of the IC so that the very small dimple is at pin 1 (ask if you are unsure as to the correct way round the ic should be fitted). Good soldering skills are required to fit this SPI Flash IC, if you dont feel capable get someone suitably competent to carry out the procedure. If you are not in the UK and would like the programmed spi flash ic then please contact me for postage prices for your country. Europe is normally £2.50 extra for a non- tracked delivery of 3 to 5 working days contact me if you wish to proceed and I will adjust the listing to allow you to do so. All my items are despatched promptly which is normally same day despatch. Any questions ask away.

BLAUPUNKT 32/146i-GB-5B-HBKUP-UK TP.MSD309.BP85 STUCK IN STANDBY REPAIR IC UF11 PLEASE NOTE THIS ISNT THE MAIN BOARD FOR SALE BUT IT IS FOR ONE FLASH IC UF11 FOR THE MAIN BOARDAs a result of some people abusing the returns process on ebay I will no longer be selling the programmed spi flash ics for TVs as new other, they will now be sold as spares and repairs. I have had people think they are buying a new TV board for £10 and 80p delivery for first class! This I will not tolerate when they cannot be bothered to read the listing details and then ask for a return for there own incompetent mistake! I suggest you look at my feedback for the programmed spi flash ics and make your own mind up. Until ebay does something about this then this is the only way to combat this! Sorry to the majority of buyers but I am sure you will understand.If your 32/146i-GB-5B-HBKUP-UK LED Blaupunkt LED TV is stuck in standby or reboots constantly, continually on channel search, different colours on screen or up side down picture then the SPI Flash could have been corrupted. Simple solution replace SPI Flash ic UF11 with the programmed chip supplied. This is suitable for the following LED set: Blaupunkt 32inch led tv 32/146i-GB-5B-HBKUP-UK Main Board TP.MSD309.BP85 Screen numbers suitable for this SPI EPROM 32H2HD LVW320SSDX E2 V1 LVW320SSDX E2 V5 32LTD LVW320SSDX E2 V2 LVW320SSDX E2 V6 32LTDHD The label on motherboard being LSC320AN02-A IF YOUR SCREEN MODEL NUMBER AND TV MODEL DOESNT MATCH EXACTLY THEN PLEASE DONT PURCHASE IT! IT WILL NOT WORK OTHERWISE! Soldering skills are required to remove the spi flash from the PCB without causing damage to any of the surface mount components and to solder the supplied SPI Flash IC. After fitting the programmed spi flash ic you will need to carry out a First time installation ofthe TV to get all the Freeview channels for your country and location. All responsibility is down to you and no liability will be taken for fitting it incorrectly or any damage as a result of fitting it. Good soldering skills are required to fit this SPI Flash IC, if you dont feel capable get someone suitably competent to carryout the procedure. All my items are despatched promptly which is normally same day despatch. Any questions ask away.

Blaupunkt 40/149i-GB-5B-FHBKU-EU STUCK IN STANDBY? FLASH IC UF11 T.MSD309.B81C 12176 SENT FASTPLEASE NOTE THIS ISNT THE MAIN BOARD FOR SALE BUT THE FLASH IC FOR THE MAIN BOARD!As a result of some people abusing the returns process on ebay I will no longer be selling the programmed spi flash ics for TVs as new other, they will now be sold as spares and repairs. I have had people think they are buying a new TV board for £10 and 80p delivery for first class! This I will not tolerate when they cannot be bothered to read the listing details and then ask for a return for there own incompetent mistake! I suggest you look at my feedback for the programmed spi flash ics and make your own mind up. Until ebay does something about this then this is the only way to combat this! Sorry to the majority of buyers but I am sure you will understand.If your Blaupunkt 40/149i-GB-5B-FHBKU-EU TV has a corrupted flash ic it can suffer from one of the following symptoms: Stuck on standby, constantly on the channel search, screen image upside down, strange colours on the screen, plus various other issues (if your unsure as to your symptom contact me for further clarification). Simple solution is to replace the SPI Flash ic UF11 with the programmed chip supplied. Once programmed the flash ic will be verified with the programmed data. This is only suitable for the following Blaupunkt 40/149i-GB-FHBKU-EU or Blaupunkt 40/149i-GB-FHBKU-UK TV with main board number T.MSD309.B81C 12176 with screen LTA400HM21. Please ensure your leds are fully functional as this TV also suffers from the LEDS failing resulting in no backlight and no image on the screen. Soldering skills are required to remove the spi flash from the PCB without causing damage to any of the surface mount components and to solder the supplied SPI Flash IC smd component. All responsibility is down to you and no liability will be taken for fitting it incorrectly or any damage as a result of fitting it. Please ensure when fitting the ic that the correct orientation of the IC so that the very small dimple is at pin 1 (ask if you are unsure as to the correct way round the ic should be fitted). Good soldering skills are required to fit this SMD (Surface Mount Device) SPI Flash IC, if you dont feel capable get someone suitably competent to carry out the procedure. All my items are despatched promptly which is normally same day despatch.Any questions ask away.

BLAUPUNKT 32/133I-WB-5B2-HBKUP-EU STUCK IN STANDBY? FLASH IC UF11 TP.MSD309.BP85 PLEASE NOTE THIS ISNT THE MAIN BOARD FOR SALE BUT THE FLASH IC UF11 FOR THE MAIN BOARD!As a result of some people abusing the returns process on ebay I will no longer be selling the programmed spi flash ics for TVs as new other, they will now be sold as spares and repairs. I have had people think they are buying a whole new TV board for £10 and 80p for first class delivery! This I will not tolerate when they cannot be bothered to read the listing details and then ask for a return for there own incompetent mistake! I suggest you look at my feedback for the programmed spi flash ics and make your own mind up. Until ebay does something about this then this is the only way to combat this! Sorry to the majority of buyers but I am sure you will understand.If your Blaupunkt 32/133I-WB-5B2-HBKUP-EU led TV has a corrupted flash ic it can suffer from one of the following symptoms: Stuck on standby, constantly on the channel search, screen image upside down, strange colours on the screen, plus various other issues (if your unsure as to your symptom contact me for further clarification). Simple solution is to replace the SPI Flash ic UF11 with the programmed chip supplied. Once programmed it will be verified that the correct data has been written into the flash ic, this ensures 100% correct data write to the flash IC. This is suitable for the following LED sets: Blaupunkt 32-133I-WB-5B2-HBKUP-EU Main Board TP.MSD309.BP85 Screen Model number suitable for this SPI flash ic is: LC.4U303.001 LSC320AN02 After fitting the kit carry out a Master Reset on the TV by entering the TV Menu. This will then retune the Freeview Channels and set the Country code. Soldering skills are required to remove the spi flash from the PCB without causing damage to any of the surface mount components and to solder the supplied SPI Flash IC. All responsibility is down to you and no liability will be taken for fitting it incorrectly or any damage as a result of fitting it. Please ensure when fitting the ic that the correct orientation of the IC so that the very small dimple is at pin 1 (ask if you are unsure as to the correct way round the ic should be fitted). Good soldering skills are required to fit this SPI Flash IC, if you dont feel capable get someone suitably competent to carry out the procedure. All my items are despatched promptly which is normally same day despatch. Any questions ask away.

BLAUPUNKT 39/224I-GB-5B-FHBKUP-UK TP.MSD309.BP85 C12415 STUCK IN STANDBY REPAIR IC UF11 PLEASE NOTE THIS ISNT THE MAIN BOARD FOR SALE BUT IT IS FOR ONE FLASH IC UF11 FOR THE MAIN BOARDAs a result of some people abusing the returns process on ebay I will no longer be selling the programmed spi flash ics for TVs as new other, they will now be sold as spares and repairs. I have had people think they are buying a new TV board for £10 and 80p delivery for first class! This I will not tolerate when they cannot be bothered to read the listing details and then ask for a return for there own incompetent mistake! I suggest you look at my feedback for the programmed spi flash ics and make your own mind up. Until ebay does something about this then this is the only way to combat this! Sorry to the majority of buyers but I am sure you will understand.If your Blaupunkt 39/224I-GB-5B-FHBKUP-UK LED TV is stuck in standby or reboots constantly, continually on channel search, different colours on screen or up side down picture then the SPI Flash could have been corrupted. Simple solution replace SPI Flash ic UF11 with the programmed chip supplied. This is suitable for the following LED sets: Blaupunkt 39inch led tv 39/224I-GB-5B-FHBKUP-UK or Blaupunkt 39/224I-GB-5B-FHBKUP-EU Main Board TP.MSD309.BP85 C12415 Screen number suitable for this SPI FLASH EPROM V390HJ1-LE1 IF YOUR SCREEN MODEL NUMBER AND TV MODEL DOESNT MATCH EXACTLY THEN PLEASE DONT PURCHASE IT! IT WILL NOT WORK OTHERWISE! Soldering skills are required to remove the spi flash from the PCB without causing damage to any of the surface mount components and to solder the supplied SPI Flash IC. After fitting the programmed spi flash ic you will need to carry out a First time installation of the TV to get all the Freeview channels for your country and location. All responsibility is down to you and no liability will be taken for fitting it incorrectly or any damage as a result of fitting it. Good soldering skills are required to fit this SPI Flash IC, if you dont feel capable get someone suitably competent to carryout the procedure. All my items are despatched promptly which is normally same day despatch. Any questions ask away.

Blaupunkt 40/191i-GB-5B-FHBKU-EU STUCK IN STANDBY? FLASH IC UF11 T.MSD309.B81C 12176 SENT FASTPLEASE NOTE THIS ISNT THE MAIN BOARD FOR SALE BUT THE FLASH IC FOR THE MAIN BOARD!As a result of some people abusing the returns process on ebay I will no longer be selling the programmed spi flash ics for TVs as new other, they will now be sold as spares and repairs. I have had people think they are buying a new TV board for £10 and 80p delivery for first class! This I will not tolerate when they cannot be bothered to read the listing details and then ask for a return for there own incompetent mistake! I suggest you look at my feedback for the programmed spi flash ics and make your own mind up. Until ebay does something about this then this is the only way to combat this! Sorry to the majority of buyers but I am sure you will understand.If your Blaupunkt 40/191i-GB-5B-FHBKU-EU TV has a corrupted flash ic it can suffer from one of the following symptoms: Stuck on standby, constantly on the channel search, screen image upside down, strange colours on the screen, plus various other issues (if your unsure as to your symptom contact me for further clarification). Simple solution is to replace the SPI Flash ic UF11 with the programmed chip supplied. Once programmed the flash ic will be verified with the programmed data. This is only suitable for the following models Blaupunkt 40/191i-GB-FHBKU-EU or Blaupunkt 40/191i-GB-FHBKU-UK TV with main board number T.MSD309.B81C 12176 with screen LTA400HM21. Please ensure your leds are fully functional as this TV also suffers from the LEDS failing resulting in no backlight and no image on the screen. Soldering skills are required to remove the spi flash from the PCB without causing damage to any of the surface mount components and to solder the supplied SPI Flash IC smd component. All responsibility is down to you and no liability will be taken for fitting it incorrectly or any damage as a result of fitting it. Please ensure when fitting the ic that the correct orientation of the IC so that the very small dimple is at pin 1 (ask if you are unsure as to the correct way round the ic should be fitted).Good soldering skills are required to fit this SMD (Surface Mount Device) SPI Flash IC, if you dont feel capable get someone suitably competent to carry out the procedure. All my items are despatched promptly which is normally same day despatch.Any questions ask away.

BLAUPUNKT 32/147I-GB-5B-FHBKU-EU STUCK IN STANDBY? SPI FLASH IC UF11 TP.MSD309.BP85 PLEASE NOTE THIS ISNT THE MAIN BOARD FOR SALE BUT THE FLASH IC UF11 FOR THE MAIN BOARD!As a result of some people abusing the returns process on ebay I will no longer be selling the programmed spi flash ics for TVs as new other, they will now be sold as spares and repairs. I have had people think they are buying a whole new TV board for £10 and 80p for first class delivery! This I will not tolerate when they cannot be bothered to read the listing details and then ask for a return for there own incompetent mistake! I suggest you look at my feedback for the programmed spi flash ics and make your own mind up. Until ebay does something about this then this is the only way to combat this! Sorry to the majority of buyers but I am sure you will understand.If your Blaupunkt 32/147I-GB-5B-FHBKU-EU led TV has a corrupted flash ic it can suffer from one of the following symptoms: Stuck on standby, constantly on the channel search, screen image upside down, strange colours on the screen, plus various other issues (if your unsure as to your symptom contact me for further clarification). Simple solution is to replace the SPI Flash ic UF11 with the programmed chip supplied. Once programmed it will be verified that the correct data has been written into the flash ic, this ensures 100% correct data write to the flash IC. This is suitable for the following LED sets: Blaupunkt 32inch led tv Blaupunkt 32/147I-GB-5B-FHBKU-EU Main Board TP.MSD309.BP85 Screen number suitable for this SPI flash ic is: LVF320SSDX E1 V1 32H2FHD After fitting the kit carry out a Master Reset on the TV by entering the TV Menu. This will then retune the Freeview Channels and set the Country code. Soldering skills are required to remove the spi flash from the PCB without causing damage to any of the surface mount components and to solder the supplied SPI Flash IC. All responsibility is down to you and no liability will be taken for fitting it incorrectly or any damage as a result of fitting it. Please ensure when fitting the ic that the correct orientation of the IC so that the very small dimple is at pin 1 (ask if you are unsure as to the correct way round the ic should be fitted). Good soldering skills are required to fit this SPI Flash IC, if you dont feel capable get someone suitably competent to carry out the procedure. If you are not in the UK and would like the programmed spi flash ic then please contact me for postage prices for your country. Europe is normally £2.50 extra for a non- tracked delivery of 3 to 5 working days contact me if you wish to proceed and I will adjust the listing to allow you to do so. All my items are despatched promptly which is normally same day despatch. Any questions ask away.

BLAUPUNKT 40/133I-WB-5B-FHBKUP-EU TP.MSD309.BP85 STUCK IN STANDBY FLASH IC UF11 PLEASE NOTE THIS ISNT THE MAIN BOARD FOR SALE BUT THE FLASH IC FOR THE MAIN BOARD!As a result of some people abusing the returns process on ebay I will no longer be selling the programmed spi flash ics for TVs as new other, they will now be sold as spares and repairs. I have had people think they are buying a new TV board for £10 and 80p delivery for first class! This I will not tolerate when they cannot be bothered to read the listing details and then ask for a return for there own incompetent mistake! I suggest you look at my feedback for the programmed spi flash ics and make your own mind up. Until ebay does something about this then this is the only way to combat this! Sorry to the majority of buyers but I am sure you will understand. If your BLAUPUNKT 40/133I-WB-5B-FHBKUP-EU TV has a corrupted flash ic it can suffer from one of the following symptoms: Stuck on standby, constantly on the channel search, screen image upside down, strange colours on the screen, plus various other issues (if your unsure as to your symptom contact me for further clarification). Simple solution is to replace the SPI Flash ic UF11 with the programmed chip supplied. Once programmed it will be verified that the correct data has been written into the flash ic, this ensures 100% correct data write to the flash IC. This is suitable for the following LED set: Blaupunkt 40inch led tv 40/133I-WB-5B-FHBKUP-EU or 40/133I-WB-5B-FHBKUP-UK Main Board TP.MSD309.BP85 Screen model numbers suitable for this Blaupunkt 40/133I-WB-5B-FHBKUP-EU LSC400HM06 or LSC400HM09 IF YOUR SCREEN PANEL MODEL NUMBER AND TV MODEL DOESNT MATCH EXACTLY THEN PLEASE DONT PURCHASE IT! IT WILL NOT WORK OTHERWISE! They do a few screen models for this TV so please check before purchasing as it is essential! Soldering skills are required to remove the SMD spi flash from the PCB without causing damage to any of the surface mount components and to solder the supplied SMD SPI Flash IC. All responsibility is down to you and no liability will be taken for fitting it incorrectly or any damage as a result of fitting it. Good soldering skills are required to fit this SMD SPI Flash IC, if you dont feel capable get someone suitably competent to carry out the procedure. All my items are despatched promptly which is normally same day despatch. Any questions ask away.