*Rare* Bowers and Wilkins High-end speaker Very good condition.Pair of B&W Matrix Concept 90 CM1and CM2 All original grills in excellent shape, original black paint 3 Way design with lower Bass cabinets and upper TM monitor CM2 floor-standing speakers and CM1 monitor dimensions 955x 162 wide x211 deep1 Solid Aluminum Upper cabinet CM1 Monitor 26mm tweeter 126mm Kevlar cone midrange 2 x 130mm bass drivers 48-20 kHz at +-1.5 dB 85 dB sensitivity 28 lbs each 50 to 200 Watts Circuit Protection System -6 db at 36 Hz All grills are included in excellent conditionI prefer Local pickup but will ship at buyers cost Original black paint They do have dings and scratches but I was able to cover them with a Black Sharpie and you will only notice up close. Pared with a sub (not needed) these are giant killers. Easily comparable to modern $2000+ plus speakers If seller chooses shipping Item will be shipped to your verified eBay/PayPal address ONLY. Please do not ask to have it shipped to a different address. Local pickup possible Salt Lake City, Utah Thanks for looking and please feel free asking any questions.Forum review: I found the speakers to be very open and airy. Excellent soundstage and depth. The image height could be a bit more focus but its not bad. Like most B&W, the sound seems to come out effortlessly. I play everything from classical to jazz to hard rock and really heavy metal. I think they work well up to really heavy metal. I liked the metal dome tweeters a lot. While they reproduced good sibiliance they arent too hot and sizzly. The mids were nice but not too warm. I was comparing them to a set of Linn Kabers back then and I found the Linns too dry and sterile (tho very accurate). The matrix system offered a tight sound...snare drum damping was good... didnt seem to have leftover harmonics or artifacts. I played the Sheffield Drum Record and loved it. I recall my brother mentioning he liked the high-mids better than his original 801s. Bass-wise, it was more than adequate. They seem to roll off at 80Hz. However, being rear firing, if you move the speakers around, the bass will improve somewhat. I have mine only a foot away from the way and, iirc, they sounded better about 2 feet away.

Bowers & Wilkins CM9 S2 floor standing speaker tower B&W. Amazing condition. No pets or kids messing these up. Both speakers are available. Ebay doesnt allow a shipping calculation for two separate packages. These will come in their original boxes.

*Rare* Bowers and Wilkins High-end speaker Very good condition.Pair of B&W Matrix Concept 90 CM1and CM2- CM2 floor-standing speakers and CM1 monitor dimensions 955x 162 wide x211 deep1 Aluminum Upper CM1 Monitor cabinet 26mm tweeter 126mm Kevlar cone midrange 2 x 130mm bass drivers 48-20 kHz at +-1.5 dB 85 dB sensitivity 28 lbs each 50 to 200 Watts Circuit Protection System -6 db at 36 Hz All grills are included in excellent conditionI prefer Local pickup but will ship at buyers cost Original black paint They do have dings and scratches but I was able to cover them with a Black Sharpie and you will only noticeable if you are standing very close. Pared with a sub (Not needed) these would are giant killers. Easily comparable to modern $2000+ plus speakers If seller chooses shipping Item will be shipped to your verified eBay/PayPal address ONLY. Please do not ask to have it shipped to a different address. Local pickup possible Salt Lake City, Utah Thanks for looking and please feel free asking any questions.Forum review: I found the speakers to be very open and airy. Excellent soundstage and depth. The image height could be a bit more focus but its not bad. Like most B&W, the sound seems to come out effortlessly. I play everything from classical to jazz to hard rock and really heavy metal. I think they work well up to really heavy metal. I liked the metal dome tweeters a lot. While they reproduced good sibiliance they arent too hot and sizzly. The mids were nice but not too warm. I was comparing them to a set of Linn Kabers back then and I found the Linns too dry and sterile (tho very accurate). The matrix system offered a tight sound...snare drum damping was good... didnt seem to have leftover harmonics or artifacts. I played the Sheffield Drum Record and loved it. I recall my brother mentioning he liked the high-mids better than his original 801s. Bass-wise, it was more than adequate. They seem to roll off at 80Hz. However, being rear firing, if you move the speakers around, the bass will improve somewhat. I have mine only a foot away from the way and, iirc, they sounded better about 2 feet away.

Bowers & Wilkins CM9 S1 Gloss Black Floor Standing Speakers. Perfect working order. Includes original floor stands with the correct fittings. The cabinets themselves are in nice presentable condition with only very minor signs of use. Both tweeters are damaged, and one of the mid-range drivers has a blemish. The sounds output still sounds perfect and detailed as you would expect. The tweeters can be easily replaced and purchased directly from Bowers and WIlkins spare parts. House move forces sale. Please see my other items listed as I have a full set of matching CM series speakers and a Cambridge Audio amplifier for sale.

Ich verkaufe meine Bowers and Wilkins CM9 inkl. dem Marantz PM7004, Marantz CD Player CD6003, und dem Schallplattenspieler Rega RP1. Die Geräte wurden im Jahr 2011 angeschafft. Die passenden Boxenkabel sind natürlich auch mit dabei. Einziges Manko bei den Boxen siehe Bilder - kann man aber auswechseln. Es sind leider keine Spikes mehr vorhanden. Der Lieferumfang ist auf den Bildern abgebildet. Ansonsten funktioniert alles einwandfrei und ist in einem guten Zustand. Es kann natürlich gerne ausprobiert werden. Es findet kein Versand statt - nur Abholung und es wird auch nur alles im Set verkauft. Zusammen finde ich alles gebraucht im Internet bei über 1.000€. Da es sich um einen Privatverkauf handelt, erfolgt der Verkauf unter Ausschluss von Gewährleistung und Garantie.

The listing is for a pair of matching genuine B&W stands. Please note they are in quite poor condition. They have many scuffs and also missing pretty much all the screws. The remaining screws are rusted and seized. I’m not 100% sure, but I think they were removed from DM7 MKII speakers, or from DM2 MKII speakers. Anyways the distance between the screw holes centres is 12cm. Please measure your speaker’s holes at the bottoms. The stands are 19.5cm tall. I’m sure you can use them with any speakers if you happy to drill the holes in the bottoms of your speakers. The stands are designed to hold some heavy speakers steady. Please inspect the photos. Please ask if you want to see anything in details. I will try to make more close-up photos upon request. They will be packed with extra care for safe delivery ti anywhere in the world. Please let me know if you need any other B&W genuine part. We might be able to get them for you.

Cosmetically, its very close to perfect. If you look closely under the right light, you can probably find some very light signs of wear from rarely used, but overall they look the excellent condition. This speakers has been tested working properly on all functions. Speakers are including the grills, floor spikes or rubber feet and original boxes... PLEASE DONT ASK ME SHIPPING! BUYERS ARRANGES SHIPPING AND PICKUP ITEM BY SHIPPING CARRIERSSpeakers have the original boxes. Local pick it up preferred or buyers are responsible to arrange shipping and insurance. For quick supports can be reached, 9167.79.9889 or click on visit store for more details. My zip code: CA 95742

The listing is for a pair of Black B&W P4 Front Grilles. The grilles are in good condition with no cracks. One of the grilles has a few small, insignificant holes in the fabric at the corners on the back, but the other one is fine. Feel free to inspect the photos, and if you require more close-up shots, please do not hesitate to ask.

The listing is for a pair of matching genuine B&W stands. Please note they are in quite poor condition. They have many scuffs and also missing pretty much all the screws. The remaining screws are rusted and seized. I’m not 100% sure, but I think they were removed from DM7 MKII speakers, or from DM2 MKII speakers. Anyways the distance between the screw holes centres is 12cm. Please measure your speaker’s holes at the bottoms. The stands are 19.5cm tall. I’m sure you can use them with any speakers if you happy to drill the holes in the bottoms of your speakers. The stands are designed to hold some heavy speakers steady. Please inspect the photos. Please ask if you want to see anything in details. I will try to make more close-up photos upon request. They will be packed with extra care for safe delivery ti anywhere in the world. Please let me know if you need any other B&W genuine part. We might be able to get them for you.

( See Additional Pictures, Below this eBay Listing ) am a B&W, Bowers & Wilkins Hi-Fi Audio Consultant for over 40-years. What you see in the pictures is what you will receive. What you will receive:Bowers & Wilkins NAUTILUS, HF Motor System, Tweeter Diaphragm with 1 Alum Dome.For B&W Speakers: CM1, CM7, CM8, DS3, CDS3 Your Box will be Labeled: ZZ22943, but is compatible with all of the speakers below: ( manufactured by B&W: Tues, 22nd/ Nov/ 2022 ) B&W Speakers Original Part #: B&W CM1 ZZ22943B&W CM7 ZZ22943B&W CM8 ZZ22943B&W DS3 ZZ22943B&W CDS3 ZZ22943 Shipping & Handling, and Conditions: * Ships only to the 48-states. * No International Sales. * Pay with PayPal Only, must have a Confirmed/ Verified shipping address with PayPal. * Cost of Shipping: 10.00 ( to the 48-states). * All sales are final, No Refunds. Exclude shipping locationsExclude specific locations (regions, countries, PO boxes) that you dont want to ship to. To save time and list faster, go to My eBay Site Preferences and select the specific locations you want to exclude on allyour listings. Learn moreExcluded locations:Alaska/Hawaii, US Protectorates, APO/FPO, Africa, Asia, Central America and Caribbean, Europe, Middle East, Oceania, Southeast Asia, South America, PO Box

The listing is for a pair of matching genuine B&W stands. Please note they are in quite poor condition. They have many scuffs and also missing pretty much all the screws. The remaining screws are rusted and seized. I’m not 100% sure, but I think they were removed from DM7 MKII speakers, or from DM2 MKII speakers. Anyways the distance between the screw holes centres is 12cm. Please measure your speaker’s holes at the bottoms. The stands are 19.5cm tall. I’m sure you can use them with any speakers if you happy to drill the holes in the bottoms of your speakers. The stands are designed to hold some heavy speakers steady. Please inspect the photos. Please ask if you want to see anything in details. I will try to make more close-up photos upon request. They will be packed with extra care for safe delivery ti anywhere in the world. Please let me know if you need any other B&W genuine part. We might be able to get them for you.