1 Paar (2 St.) gepflegte Wandhalterungen von Canton, passend für Lautsprecher Plus CX.3 und Plus MX.3, weiß, inkl. Schrauben, tierfreier Nichtraucherhaushalt, schaut auch nach meinen anderen Angeboten

Die Canton Plus MX.3 In-Wall-Lautsprecher sind gebraucht, aber in gutem Zustand. Sie standen zwei Jahre in einem trockenem Schuppen. Bis zur Einlagerung haben sie einwandfrei funktioniert. Ich verkaufe sie aber ausdrcklich als defekt! Bei Fragen schreibt mich gerne an.

Canton Plus MX.3 Weiss High Gloss. Die Lautsprecher sind im Guten Zustand keine Macken oder Kratzer.Tierfreier und Nichtraucherhaushalt Privatverkauf keine Garantie oder Rücknahme

Offered for your consideration is one (1) CANTON 80mm (3? inch) mid/bass woofer that was original equipment in my CANTON Plus MX surround speakers, made in Germany c.2003. This capable driver was likely used in other CANTON models from this period, but buyer is responsible for accurately assessing its suitability for any other applications. So, please see my large photos, measurements and read the remaining description to decide if this splendid CANTON mid/bass driver should be yours. This CANTON woofer is in clean, excellent overall condition. It has a flawless poly cone, perfect voice coil dustcap, and permanent rubber surround. Plus, the black anodized steel basket is in great shape and so is the magnet ‘bell’ cover. And, the +/- terminals are marked for polarity and have never been soldered on the spades. Overall, this little woofer is indistinguishable from new! Most importantly, it’s been fully tested and sounds terrific as you’d expect from CANTON. It has a fast, detailed midrange and carries deep into lower treble (crossed over to tweeter at 5kHz in the Plus MX). Plus, it’s rated to 70W so it’s a stout design. And, I tested its DC resistance at 3.8?, consistent with a nominal 4 ohm driver rating. Lastly, the basket flange measures 3?” square, it stands about 2?”, and the mounting holes are spaced 3” adjacent / 3½” diagonal apart, c-t-c. This is a great find if you have a blown mid/bass woofer in your Plus MX or other suitable CANTON speaker. And, long discontinued, it would be a smart spare to have on hand for future needs. As pictured and described, this superb CANTON 80mm mid/bass woofer is offered at a competitive price. Terms of Sale: I encourage interested parties to ask any questions they may have about this listing before committing to purchase. Payment is due at checkout by PayPal or other accepted methods. U.S. mailing addresses will pay $8.95 for very carefully packed shipping via U.S. Postal Service or FedEx with tracking and delivery confirmation. International purchases accepted only from those who are able to pay with PayPal, including shipping by U.S. Postal Service First Class Parcel Air Mail. Thanks for looking! *the cabinet sticker photo is presented only for donor model reference

Offered for your consideration is a CANTON 15mm dome tweeter that was original equipment in their Plus MX surround speakers, manufactured c.2003. The tweeter was epoxied to the back of the faceplate by CANTON, so the whole assembly must be replaced (which is simple to do as I’ll describe later). So, please see the large photos, measurements, and read the remaining description to decide if this capable high frequency driver is suitable for your needs. *Although the listing is written in singular to avoid any confusion, two (2) identical CANTON Plus MX tweeters are available at the time of this writing. Please choose if you’d like to buy one or both in the quantity field at the top of the listing. The shipping cost will be automatically calculated by eBay checkout. This tweeter is in clean, excellent condition. It has a flawless, dimple-free radiating surface well protected by the acoustically transparent wave-guide. Plus, the sturdy black plastic faceplate assembly has no scratches or cracks. And, I’ve left several inches of the +/- input wires soldered to the terminals for the new owner’s convenience when splicing-in to their speaker. Overall, this CANTON tweeter looks practically new. It’s been fully tested and sounds great—clear and strong output that goes deep into the beyond-audibility ‘sparkle’ zone with its 25kHz rating! And, I tested its DC resistance at 3.9-4.0?, consistent with a nominal 4 ohm driver rating. Lastly, the faceplate measures 3½” wide x just under 4?” high. Retrofitting to your CANTON MX speaker because of a blown or otherwise damaged tweeter is really easy to do: Remove grille by pulling at edge or corner with a sturdy safety pin or similar. Unscrew four woofer bolts, carefully pull woofer out and unplug the +/- wires; set aside cone side up. Remove the two screws flanking the tweeter. Pull the front fascia/baffle assembly back and cut the wires close to the magnet of the dead tweeter. Strip those wires back ½” or so, twist like-colors to the wires on the new tweeter and wrap each juncture with electrical tape. Reassemble and you’re done! As pictured and described, this CANTON Plus MX 15mm dome tweeter is offered at a competitive price. Terms of Sale: I encourage interested parties to ask any questions they may have about this listing before committing to purchase. Payment is due at checkout by PayPal or other accepted methods. U.S. mailing addresses will pay $4.95 for very carefully packed shipping via U.S. Postal Service with tracking and delivery confirmation. International purchases accepted only from those who are able to pay with PayPal, including shipping by U.S. Postal Service First Class Parcel Air Mail. Thanks for looking! *the cabinet sticker photo is presented only for donor model reference

Wegen Umstieg auf ein Wireless-System verkaufen wir unser Boxen, die sich in einem sehr guten Zustand befinden, einwandfrei funktionieren und aus einem Nichtraucherhaushalt stammen. Eine schwarze und eine weiße Halterung & Kabel zum Anschließen gibt es dazu. Bei Fragen melden Sie sich gerne.

Offered for your consideration is one (1) CANTON 80mm (3? inch) mid/bass woofer that was original equipment in my CANTON Plus MX surround speakers, made in Germany c.2003. This capable driver was likely used in other CANTON models from this period, but buyer is responsible for accurately assessing its suitability for any other applications. So, please see my large photos, measurements and read the remaining description to decide if this splendid CANTON mid/bass driver should be yours. This CANTON woofer is in clean, excellent overall condition. It has a flawless poly cone, perfect voice coil dustcap, and permanent rubber surround. Plus, the black anodized steel basket is in great shape and so is the magnet ‘bell’ cover. And, the +/- terminals are marked for polarity and have never been soldered on the spades. Overall, this little woofer is indistinguishable from new! Most importantly, it’s been fully tested and sounds terrific as you’d expect from CANTON. It has a fast, detailed midrange and carries deep into lower treble (crossed over to tweeter at 5kHz in the Plus MX). Plus, it’s rated to 70W so it’s a stout design. And, I tested its DC resistance at 3.8?, consistent with a nominal 4 ohm driver rating. Lastly, the basket flange measures 3?” square, it stands about 2?”, and the mounting holes are spaced 3” adjacent / 3½” diagonal apart, c-t-c. This is a great find if you have a blown mid/bass woofer in your Plus MX or other suitable CANTON speaker. And, long discontinued, it would be a smart spare to have on hand for future needs. As pictured and described, this superb CANTON 80mm mid/bass woofer is offered at a competitive price. Terms of Sale: I encourage interested parties to ask any questions they may have about this listing before committing to purchase. Payment is due at checkout by PayPal or other accepted methods. U.S. mailing addresses will pay $8.95 for very carefully packed shipping via U.S. Postal Service or FedEx with tracking and delivery confirmation. International purchases accepted only from those who are able to pay with PayPal, including shipping by U.S. Postal Service First Class Parcel Air Mail. Thanks for looking! *the cabinet sticker photo is presented only for donor model reference

Offered for your consideration is one (1) CANTON 80mm (3? inch) mid/bass woofer that was original equipment in my CANTON Plus MX surround speakers, made in Germany c.2003. This capable driver was likely used in other CANTON models from this period, but buyer is responsible for accurately assessing its suitability for any other applications. So, please see my large photos, measurements and read the remaining description to decide if this splendid CANTON mid/bass driver should be yours. This CANTON woofer is in clean, excellent overall condition. It has a flawless poly cone, perfect voice coil dustcap, and permanent rubber surround. Plus, the black anodized steel basket is in great shape and so is the magnet ‘bell’ cover. And, the +/- terminals are marked for polarity and have never been soldered on the spades. Overall, this little woofer is indistinguishable from new! Most importantly, it’s been fully tested and sounds terrific as you’d expect from CANTON. It has a fast, detailed midrange and carries deep into lower treble (crossed over to tweeter at 5kHz in the Plus MX). Plus, it’s rated to 70W so it’s a stout design. And, I tested its DC resistance at 3.8?, consistent with a nominal 4 ohm driver rating. Lastly, the basket flange measures 3?” square, it stands about 2?”, and the mounting holes are spaced 3” adjacent / 3½” diagonal apart, c-t-c. This is a great find if you have a blown mid/bass woofer in your Plus MX or other suitable CANTON speaker. And, long discontinued, it would be a smart spare to have on hand for future needs. As pictured and described, this superb CANTON 80mm mid/bass woofer is offered at a competitive price. Terms of Sale: I encourage interested parties to ask any questions they may have about this listing before committing to purchase. Payment is due at checkout by PayPal or other accepted methods. U.S. mailing addresses will pay $8.95 for very carefully packed shipping via U.S. Postal Service or FedEx with tracking and delivery confirmation. International purchases accepted only from those who are able to pay with PayPal, including shipping by U.S. Postal Service First Class Parcel Air Mail. Thanks for looking! *the cabinet sticker photo is presented only for donor model reference

Offered for your consideration is a CANTON 15mm dome tweeter that was original equipment in their Plus MX surround speakers, manufactured c.2003. The tweeter was epoxied to the back of the faceplate by CANTON, so the whole assembly must be replaced (which is simple to do as I’ll describe later). So, please see the large photos, measurements, and read the remaining description to decide if this capable high frequency driver is suitable for your needs. *Although the listing is written in singular to avoid any confusion, two (2) identical CANTON Plus MX tweeters are available at the time of this writing. Please choose if you’d like to buy one or both in the quantity field at the top of the listing. The shipping cost will be automatically calculated by eBay checkout. This tweeter is in clean, excellent condition. It has a flawless, dimple-free radiating surface well protected by the acoustically transparent wave-guide. Plus, the sturdy black plastic faceplate assembly has no scratches or cracks. And, I’ve left several inches of the +/- input wires soldered to the terminals for the new owner’s convenience when splicing-in to their speaker. Overall, this CANTON tweeter looks practically new. It’s been fully tested and sounds great—clear and strong output that goes deep into the beyond-audibility ‘sparkle’ zone with its 25kHz rating! And, I tested its DC resistance at 3.9-4.0?, consistent with a nominal 4 ohm driver rating. Lastly, the faceplate measures 3½” wide x just under 4?” high. Retrofitting to your CANTON MX speaker because of a blown or otherwise damaged tweeter is really easy to do: Remove grille by pulling at edge or corner with a sturdy safety pin or similar. Unscrew four woofer bolts, carefully pull woofer out and unplug the +/- wires; set aside cone side up. Remove the two screws flanking the tweeter. Pull the front fascia/baffle assembly back and cut the wires close to the magnet of the dead tweeter. Strip those wires back ½” or so, twist like-colors to the wires on the new tweeter and wrap each juncture with electrical tape. Reassemble and you’re done! As pictured and described, this CANTON Plus MX 15mm dome tweeter is offered at a competitive price. Terms of Sale: I encourage interested parties to ask any questions they may have about this listing before committing to purchase. Payment is due at checkout by PayPal or other accepted methods. U.S. mailing addresses will pay $4.95 for very carefully packed shipping via U.S. Postal Service with tracking and delivery confirmation. International purchases accepted only from those who are able to pay with PayPal, including shipping by U.S. Postal Service First Class Parcel Air Mail. Thanks for looking! *the cabinet sticker photo is presented only for donor model reference

Canton Plus MX.3 In-Wall-Lautsprecher. Insgesamt 5 Stück

Canton Plus MX.3 Kleinlautsprecher Paar 40/70 Watt Hochglanz Schwarz. Bei einem Lautsprecher gibt es einige kleine oberflächliche Kratzer, die man nur von Dichten sehen kann.

Canton Plus MX.3 In-Wall-Lautsprecher. Insgesamt 5 Stück

Canton Plus MX.3 In-Wall-Lautsprecher. Insgesamt 5 Stück

Canton Plus MX.3 2-Wege Regallautsprecher Set (2 Stk.) inkl. Wandhalterungen Die Lautsprecher sind gerbraucht, technisch und optisch einwandfrei. Wegen Systemwechsel abzugeben. OVP, Wandhalterungen und Schrauben sind auch dabei.