Community V2-6BT - Demoware vom deutschen Vertrieb- technisch neuwertig- leichte Gebrauchsspuren- Rechnung mit ausgew. MwSt- 2 Jahre Gewährleistung The V2-6 is a two-way, full-range loudspeaker system suitable for use in a wide variety of fixed installations. Compact but powerful, it is ideal for distributed systems such as those found in cafés, restaurants, shopping centers and airports. When paired with a subwoofer such as the V2-210S, a V2-6 system will produce high-fidelity, broad spectrum sound that belies its modest size. The V2-6 is also an excellent choice for ancillary delay applications. When used to augment a FOH system in such venues as auditoria, theaters and houses of worship, delay loudspeakers can significantly even-out the difference in sound pressure level from the front of the room to the rear of the room. Units may be positioned for underbalcony fill, overbalcony fill, or simply placed towards the rear of the seating areas. By deploying V2-6 loudspeakers in such a manner, the system designer will have far greater control over relative levels and relative tonal response when commissioning and equalizing the installation. The V2-6 may be mounted to a wall or ceiling surface using its included yoke bracket, suspended from its M6 threaded rigging points, or installed using a third-party mounting device.An optional model with a built-in 100W autoformer with taps at 100W, 50W, 25W and 12.5W (model V2-6T) is also available from the factory.Community V2-6BT Features:DYNA-TECH™ driver protection circuitryFerrofluid-treated HF driver for improved heat dissipationCarbon Ring Cone Technology provides 30% more piston area with increased excursion capabilityRotatable square hornTerminal strip and NL4-compatible connectorsAvailable in standard black or white finishesMounting yoke included with 10° and 20° vertical standoffsOptional V2-6T autoformer model for 70V/100V applicationsCommunity V2-6BT Specifications:Loudspeaker Type: Compact two-way, full-range, trapezoidal, vented bass, user rotatable hornOperating Range: 90 Hz to 18 kHz (-10 dB)Frequency Response: 110 Hz to 16 kHz (±3 dB)Max Input Ratings: 100W continuous, 250W program28.3 volts RMS, 56.6 volts momentary peakSensitivity (1W/1m): 92 dB (100 Hz to 12.5 kHz) free spaceMaximum Output: 112 dB SPL / 118 dB SPL (peak)Nominal Impedance: 8 ohmsMinimum Impedance: 6 ohms @ 200 HzNominal –6dB Beamwidth: 90° H x 70° V (in vertical position)Crossover Frequency: 1.3 kHzRecommended Signal Processing: 100 Hz, 24 dB/octave Butterworth high pass filterDrivers:LF 1 x 6.5-inch coneHF 1 x 1-inchDriver Protection: DYNA-TECH protection circuitryInput Connection: NL4-compatible locking connector with terminal strip in parallelControls: NoneEnclosure: Trapezoidal (22.5° included angle) 18mm, 11-ply cross-laminated birchMounting/Rigging Provisions:9 x M6 threaded rigging fittings4 x M6 threaded fittings for V-HSS and third-party suspension productsFinish: Catalyzed polyester two-part paint, black or whiteGrille: Powder coated steel, black or white finishRequired Accessories: NoneSupplied Accessories:Yoke-style mounting bracket with optional 10° and 20° standoffs that allow a 10° or 20° downward or upward vertical tiltOptional Accessories:CMKIT ceiling mount kitV-HSS handle and stand socketVB-TILT tilting bracketVB-VY6 vertical yoke bracketM6EYBLTKIT 6mm eyebolt kitDimensions:Height: 15.5 inches (395 mm)Width: 9.8 inches (249 mm)Depth: 10.1 inches (258 mm)Weight (incl. bracket):19.7 lbs (8.9 kg)21.7 lbs (9.9 kg) with autoformerModel Options:V2-6B (low impedance, black finish)V2-6W (low impedance, white finish)V2-6BT (built-in autofomer for 70V100V applications, black finish)V2-6WT (built-in autofomer for 70V100V applications, white finish)

Community V2-28 Dual 8-inch 2-Way Full-Range Speaker 300W- Demoware vom deutschen Vertrieb- technisch neuwertig- leichte Gebrauchsspuren- 2 Jahre Gewährleistung- Rechnung mit ausgew. MwSt The Community V2-28 is a two-way, full-range loudspeaker system suitable for use in a wide variety of fixed installations. This versatile unit is ideal for distributed systems such as those found in cafés, restaurants, shopping centers and airports. With its powerful dual cone drivers, the V2-28 provides additional low frequency and mid-range output over that of its sister product, the V2-8. When paired with a subwoofer such as the V2-210S, a V2-28 system will produce high-fidelity, broad spectrum sound that belies its modest size. In addition to distributed systems, the V2-28 is an excellent choice for ancillary delay applications. When used to augment a front-of-house system in venues such as auditoriums, theaters and houses of worship, delay loudspeakers can significantly even out the difference in sound pressure level from the front of the room to the rear of the room. Units may be positioned for under balcony fill, over balcony fill, or simply placed towards the rear of the seating areas. By deploying V2-28 loudspeakers in such a manner, the system designer will have far greater control over relative levels and relative tonal response when commissioning and equalizing the installation.The V2-28 may be mounted to a wall or ceiling surface using its included yoke bracket, suspended from its M6 threaded rigging points, or installed using a third-party mounting device. It includes a rotatable horn design that allows optimal dispersion in either vertical or horizontal mounting positions.FeaturesHigh fidelity, broad spectrum soundRotatable horn for optimal dispersionCarbon Ring Cone Technology and DYNA-TECH protection circuitryIdeal for distributed systems or ancillary delay and fillFrequency shaded woofers for smooth vertical pattern controlSpecs

Community V2-26B Dual 6.5-inch Full-Range Speaker DJ Lautsprecher fullrange DEMOPRODUCT DESCRIPTION- Demoware vom Deutschen Vertrieb- technisch neuwertig- leichte Gebrauchsspuren- incl. Originalverpackung- 2 Jahre Gewährleistung- Rechnung mit ausgew. MwSt Community V2-26 Dual 6.5-inch Full-Range SpeakerThe V2-26 is a two-way, full-range loudspeaker system suitable for use in a wide variety of fixed installations. This versatile model is ideal for distributed systems such as those found in cafés, restaurants, shopping centers and airports. With its powerful dual cone drivers, the V2-26 provides additional low frequency and mid-range output over that of its sister product, the V2-6. When paired with a subwoofer such as the V2-210S, a V2-26 system will produce high-fidelity, broad spectrum sound that belies its modest size. In addition to distributed systems, the V2-26 is an excellent choice for ancillary delay applications. When used to augment a front-of-house system in venues such as auditoriums, theaters and houses of worship, delay loudspeakers can significantly even out the difference in sound pressure level from the front of the room to the rear of the room. Units may be positioned for under balcony fill, over balcony fill, or simply placed towards the rear of the seating areas. By deploying V2-26 loudspeakers in such a manner, the system designer will have far greater control over relative levels and relative tonal response when commissioning and equalizing the installation.The V2-26 may be mounted to a wall or ceiling surface using its included yoke bracket, suspended from its M6 threaded rigging points, or installed using a third-party mounting device. It includes a rotatable horn design that allows optimal dispersion in either vertical or horizontal mounting positions.ApplicationsHouses of worship Restaurants, pubs, cafés Shopping malls, retail environments Airports Delay fillFeaturesHigh fidelity, broad spectrum soundRotatable horn for optimal dispersionCarbon Ring Cone Technology and DYNA-TECH protection circuitryIdeal for distributed systems or ancillary delay and fillFrequency shaded woofers for smooth vertical pattern controlSpecs

- Demoware vom deutschen Vertrieb- Rechnung mit ausgew. MwSt- 2 Jahre Gewährleistung- leichte Gebrauchsspuren- incl. Originalverpackung- technisch neuwertig Community V2-1296 VERIS 2 12-inch 2-Way Speaker 200W - 90x60 DispersionThe V2-1296 is a two-way, full-range loudspeaker system suitable for use in a wide spectrum of fixed installations. Compact and extremely powerful, the V2-1296 handles applications ranging from jazz clubs and AV presentations, to rock and roll performances. Its trapezoidal design allows it to be clustered with like units, forming powerful arrays. The 90º x 60º pattern makes the V2-1296 ideal for applications requiring a wide coverage angle, such as in rooms that are wider than they are deep. The enclosure may be suspended from its M10 threaded rigging points using a variety of optional hardware from Community, or it may be installed using a third-party mounting device.The V2-1296 provides extended high frequency response, low distortion output, a tight, punchy bass response, and precise pattern control. Featuring carefully designed crossovers that provide flat acoustic power response through the critical mid-range region, and Community’s exclusive DYNA-TECH driver protection circuitry, the V2-1296 is a versatile performer for use in music and speech applications that require high quality, high power sound reinforcement at an affordable price.ApplicationsClubsTheaters AuditoriumsHouses of worship AV presentations Fitness centersFeaturesDiscreet and aesthetic trapezoidal enclosureOptimized voicing for full-range reproductionDYNA-TECH driver protection circuitryFerrofluid-treated HF driver for improved heat dissipationCarbon Ring Cone Technology provides 30% more piston area with increased excursion capability in LF driverTerminal strip and NL4-compatible connectorsMultiple bracket options offer affordable arraying solutionsIncluded in Community’s Forecaster HD ceiling distributed system softwareAvailable in standard black or white finishesSpecsLoudspeaker Type: Two-way, full-range, trapezoidal,vented bassOperating Range: 60 Hz to 18 kHz (-10 dB)Frequency Response: 90 Hz to 16 kHz (±3 dB)Max Input Ratings:200W continuous, 500W program40 volts RMS, 80 volts momentary peakSensitivity (1W/1m): 98 dB (100 Hz to 12.5 kHz) free spaceMaximum Output: 121 dB SPL / 127 dB SPL (peak)Nominal Impedance: 8 ohmsMinimum Impedance: 6.2 ohms @ 160 HzNominal –6dB Beamwidth: 90° H x 60° V (in vertical position)Crossover Frequency: 1.3 kHzRecommended Signal Processing: 60 Hz, 24 dB/octave Butterworth high pass filterDrivers:LF 1 x 12-inch coneHF 1 x 1-inchDriver Protection: DYNA-TECH protection circuitryInput Connection: NL4-compatible locking connector with terminal strip in parallelControls: NoneEnclosure: Trapezoidal (22.5° included angle) 18mm,11-ply cross-laminated birchMounting/Rigging Provisions:13 x M10 threaded rigging fittings4 x M8 threaded fittings for third-party suspension productsFinish: Catalyzed polyester two-part paint, black or whiteGrille: Powder coated steel, black or white finishRequired Accessories: NoneSupplied Accessories: NoneOptional Accessories:VB-Y12 U-shaped yoke bracketVB-VY12 vertical yoke bracketCMKIT ceiling mount kitVB-TILT tilting bracketVB-VST versatilt bracketVFKIT vertical flying kitM10EYBLTKIT 10mm eyebolt kitSTKIT seat track kitDimensions:Height: 23.9 inches (608 mm)Width: 15.4 inches (390 mm)Depth: 14.3 inches (362 mm)Weight: 38.4 lbs (17.4 kg)Model Options:V2-1296B (black finish)V2-1296W (white finish)