I bought these new from Crutchfield a little over a year ago. They only saw a few hours of use due to complaints. Theyre in excellent condition and were never abused. Factory specs below. Thanks for your interest. Product highlights:pair of Dolby Atmos enabled speaker modulesdesigned to sit on top of front-channel ELAC Debut 2.0 bookshelf or floor-standing speakersdrivers are angled upward to reflect sound off the ceiling for overhead effects4 woven aramid-fiber woofer1/2 polymer dome tweetersensitivity: 85 dBfrequency response: 180-20,000 Hzimpedance: 6 ohmsrecommended amplifier power: up to 80 wattsacoustic suspension (sealed) enclosure5-way binding post speaker terminals7-1/8W x 5H x 9-3/8Dweight: 5.5 lbs. (each)warranty: 3 years60-day returnsMFR # DA42-BK

About the ELAC Debut A4Add Dolby Atmos® with these high-value speakersWant to take your home theaters soundstage all the way to the ceiling? Add Dolby Atmos to your system with the ELAC Debut A4 speaker modules. These add-on speakers sit on top of your floor-standing or bookshelf speakers. Together with an Atmos compatible home theater receiver, these speakers add another level of realism and excitement to movies, concerts, and sporting events in your home theater.The A4s drivers are angled toward the ceiling. That means they can bounce sound off of your ceiling, giving you huge sound. Atmos can even place sounds more accurately in your listening space, for outstanding realism and detail.A legendary speaker designer strikes again.Andrew Jones made a name for himself designing phenomenal high-end speakers. Lately, hes turned his attention toward creating speakers that offer excellent performance at very affordable prices. The Debut A4 speakers are his latest triumph. Theyre a perfect match for ELACs Debut B5 or B6 bookshelf speakers — also designed by Jones. Product highlights:Dolby Atmos enabled speaker modulesdesigned to sit on top of front speakers such as the ELAC B6 speakers4 woven aramid-fiber cone1/2 polymer aluminum dome tweeterdrivers are angled up to reflect sound off the ceiling for overhead effectsbinding post speaker terminalsacoustic suspension (sealed) enclosurefrequency response: 180-20,000 Hzrecommended amplifier power: 20-80 wattssensitivity: 85 dBimpedance: 6 ohms7-15/16W x 4-7/8H x 8-15/16Dweight: 5.2 lbs. (each)warranty: 3 yearsMFR # DA41-BK

Received from an estate, no knowledge! In ok condition has lots of visible wear and tear! Listed as parts untested! Sold As is

ELAC Debut 2.0 A4.2 Dolby Atmos Modules, Black Bought on Amazon as Open Box/Like New and never opened. Great set of speakers to extend existing system or for use on their own as bookshelf speakers.

Good condition. Slight scratching on one edge of each speaker. Not very noticeable.Great for Dolby Atmos height channels in any room! SpecsSpeaker type: Coaxial, sealedTweeter: 1 x 0.5-inch polymer domeWoofer: 1 x 4-inch woven aramid-fiber coneCrossover frequency: 5,000 HzFrequency response: 180 to 20,000 HzSensitivity: 85 dB at 2.83 v/1mRecommended amplifier power: 20 to 80 wpcNominal/peak power handling: 50 / 80 wpcNominal impedance: 6 ?; minimum 5.1 ?Binding posts: 5-way metalMagnetic shielding: NoCabinet finishes: Black Ash vinylHeight: 4.92 in / 125 mmWidth: 7.09 in / 180 mmDepth: 9.21 in / 234 mmNet weight (each): 5.5 lb / 2.5 kg

Good condition. Slight scratching on one edge of each speaker. Not very noticeable.Great for Dolby Atmos height channels in any room! SpecsSpeaker type: Coaxial, sealedTweeter: 1 x 0.5-inch polymer domeWoofer: 1 x 4-inch woven aramid-fiber coneCrossover frequency: 5,000 HzFrequency response: 180 to 20,000 HzSensitivity: 85 dB at 2.83 v/1mRecommended amplifier power: 20 to 80 wpcNominal/peak power handling: 50 / 80 wpcNominal impedance: 6 ?; minimum 5.1 ?Binding posts: 5-way metalMagnetic shielding: NoCabinet finishes: Black Ash vinylHeight: 4.92 in / 125 mmWidth: 7.09 in / 180 mmDepth: 9.21 in / 234 mmNet weight (each): 5.5 lb / 2.5 kg

Elac Debut Atmos Speakers! Great sounding fits well on floor standing speakers.

Good condition. Slight scratching on one edge of each speaker. Not very noticeable.Great for Dolby Atmos height channels in any room! SpecsSpeaker type: Coaxial, sealedTweeter: 1 x 0.5-inch polymer domeWoofer: 1 x 4-inch woven aramid-fiber coneCrossover frequency: 5,000 HzFrequency response: 180 to 20,000 HzSensitivity: 85 dB at 2.83 v/1mRecommended amplifier power: 20 to 80 wpcNominal/peak power handling: 50 / 80 wpcNominal impedance: 6 ?; minimum 5.1 ?Binding posts: 5-way metalMagnetic shielding: NoCabinet finishes: Black Ash vinylHeight: 4.92 in / 125 mmWidth: 7.09 in / 180 mmDepth: 9.21 in / 234 mmNet weight (each): 5.5 lb / 2.5 kg

Good condition. Slight scratching on one edge of each speaker. Not very noticeable.Great for Dolby Atmos height channels in any room! SpecsSpeaker type: Coaxial, sealedTweeter: 1 x 0.5-inch polymer domeWoofer: 1 x 4-inch woven aramid-fiber coneCrossover frequency: 5,000 HzFrequency response: 180 to 20,000 HzSensitivity: 85 dB at 2.83 v/1mRecommended amplifier power: 20 to 80 wpcNominal/peak power handling: 50 / 80 wpcNominal impedance: 6 ?; minimum 5.1 ?Binding posts: 5-way metalMagnetic shielding: NoCabinet finishes: Black Ash vinylHeight: 4.92 in / 125 mmWidth: 7.09 in / 180 mmDepth: 9.21 in / 234 mmNet weight (each): 5.5 lb / 2.5 kg

A pair of ELAC Dolby Atmos Debut speakers in excellent working condition. The speakers have minimal cosmetic blemishes and are accompanied by a pair of Q Acoustic glass shelves in very good condition with no scratches, suitable for wall mounting. These can be posted Postage is £12.00 for UK mainland delivery and will include transit insurance

Good condition. Slight scratching on one edge of each speaker. Not very noticeable.Great for Dolby Atmos height channels in any room! SpecsSpeaker type: Coaxial, sealedTweeter: 1 x 0.5-inch polymer domeWoofer: 1 x 4-inch woven aramid-fiber coneCrossover frequency: 5,000 HzFrequency response: 180 to 20,000 HzSensitivity: 85 dB at 2.83 v/1mRecommended amplifier power: 20 to 80 wpcNominal/peak power handling: 50 / 80 wpcNominal impedance: 6 ?; minimum 5.1 ?Binding posts: 5-way metalMagnetic shielding: NoCabinet finishes: Black Ash vinylHeight: 4.92 in / 125 mmWidth: 7.09 in / 180 mmDepth: 9.21 in / 234 mmNet weight (each): 5.5 lb / 2.5 kg

Elac Debut Model DA41-BK Dolby Atmos Speakers Pair.

Both speakers in perfect unmarked condition.

Elac Debut Model DA41-BK Dolby Atmos Speakers Pair. Condition is Used. Collection in person only.

Brown Ink Pen - eqw9598

Both speakers in perfect unmarked condition.

In excellent like new condition. Dolby’s solution for adding height channels to an Atmos-capable home cinema system where mounting speakers in or on the ceiling is not possible. Elac’s A4 speakers are designed to sit on top of the front or rear speakers and bounce the height channel off the ceiling and down to the listening position, creating the illusion that the sound is coming from speakers in the ceiling. Please note: These speakers rely on bouncing the height channel from a flat, hard ceiling. They will provide little or no height effect from a textured ceiling. More info in Dolby’s Atmos for Home Theatre guide: https://www.dolby.com/siteassets/technologies/dolby-atmos/atmos-installation-guidelines-121318_r3.1.pdf

Both speakers in perfect unmarked condition.

Dolby’s solution for adding height channels to an Atmos-capable home cinema system where mounting speakers in or on the ceiling is not possible. Elac’s A4 speakers are designed to sit on top of the front or rear speakers and bounce the height channel off the ceiling and down to the listening position, creating the illusion that the sound is coming from speakers in the ceiling. Please note: These speakers rely on bouncing the height channel from a flat, hard ceiling. They will provide little or no height effect from a textured ceiling. More info in Dolby’s Atmos for Home Theatre guide: https://www.dolby.com/siteassets/technologies/dolby-atmos/atmos-installation-guidelines-121318_r3.1.pdf Condition: Mint, as new.

Both speakers in perfect unmarked condition.