Graham 1.5t tonearm with AudioQuest 7000 cartridge. Original Packing and manauls. Used but in excellent condition in original packing. Has been packed up for years. Original shop demo from a Graham dealer. This has never left our shop.

SME style mount, tone arm only as pictured.

Excellent condition, box, packing, everything. Sound great. About 1 year old.

GRAHAM AUDIO CHARTWELL LS6/F MONITOR SPEAKERS * BOXED * RARE BLACK FACTORY FINISH great sounding speakers in good used condition The Chartwell LS6/fBuilding on the success of our popular LS6 monitor, the LS6/f is a floor-standing loudspeaker system that combines a modern aesthetic with the open, uncoloured sound youd expect from a Graham Audio system.The integrated plinth provides a flow-optimised path for the airflow from the port, reducing distortion at high outputs.The LS6/f uses the same custom drive units as the stand-mount LS6 and has an optimised crossover network using premium quality components to integrate the acoustic output from both drive units and equalise the overall response for optimum performance in free space. A switch on the front panel adds 1 or 2dB to the tweeter level, which might be advantageous in certain acoustic environments.In common with all our loudspeakers, the cabinet uses the classic BBC thinwall construction, where the panels are mass-loaded to ensure that resonances are moved away from the critical mid-range region, and a layer of Rockwool is held in place by fabric to provide air damping. Hand-matched veneers are applied and finished to a very high standard. The grille is carefully designed to minimise diffraction effects and is held in place by concealed rare-earth magnets.SpecificationsSystem2 Way, reflex loadingEnclosureThin wall damped constructionFinishReal wood veneerDimensions (w/h/d)96cm by 32cm by 32cm (including plinth)Weight21kgFrequency response40Hz to 20kHz, ±2dBNominal impedance8?Sensitivity87dB SPL (2.83V, 1m)Maximum outputOver 100dB for a pair at 2mBass/midrange165mm polypropyleneTweeter19mm dome tweeterRecommended amplifier power50 to 150 watts unclipped programme

GRAHAM AUDIO CHARTWELL LS3/5A BBC LICENSED MONITOR SPEAKERS * boxed * rrp £2280 superb sounding speakers in lovely OAK veneercondition is perfectand as picturedfabulous speakers at a really good saving from the new price * please note because they are sold as used and heavily discounted they do not qualify for the extended Graham Audio warranty *SpecificationsSystem2 Way, sealed enclosureEnclosureThin wall construction, 12mm birch plywoodFinishReal wood veneerDimensions (w/h/d)19cm by 30.5cm by 16.5cmWeight5.3kgFrequency response70Hz to 20kHz, ±3dBNominal impedance11?Sensitivity83dB SPL (2.83V, 1m)Maximum output95dB for a pair at 2mBass/midrange110mmTweeter19mm dome tweeterRecommended amplifier power25 to 50 watts unclipped programme

Willkommen bei einer Auktion von Projekt-Akustik ZUR VERSTEIGERUNG KOMMT HIERGraham Audio LS3/5 Chartwell AUSFÜHRUNGKirsche SERIENNUMMER0487A / 0487B AUFTRAGSNUMMER191860 ALTER- ZUSTANDInzahlungnahme, technisch einwandfrei und optisch im gutem Zustand (siehe Fotos) (Differenzbesteuert gemäß §25a UStG. MwSt. nicht ausweisbar) LIEFERUMFANG- Graham Audio LS3/5 Chartwell- Frontabdeckungen- Originalverpackung Auch wenn im serienmäßigem Lieferumfang evtl. mehr Zubehör enthalten sein sollte, erhalten Sie ausschließlich den oben aufgeführten Lieferumfang.TECHNISCHE DATEN - VERSANDWir versenden per Spedition oder DHL. Wir versenden nach Deutschland. Der Versand erfolgt innerhalb Deutschlands, in der Regel innerhalb von 1 - 4 Werktagen nach Zahlungseingang zu den angegebenen Versandkosten. ZAHLUNGSie haben die Möglichkeit, den Artikel in bar bei Abholung, per Überweisung oder per PayPal zu bezahlen. Einen Versand per Nachnahme bieten wir nicht! an. Bei Rückfragen oder Vereinbarung für einen Hörtermin erreichen Sie uns von Di. – Fr. von 10.00 – 19.00 Uhr und Sa. von 10.00 – 16.00 Uhr unter 0451-20 33 300. Und nun wünschen wir Ihnen viel Erfolg bei der Auktion! Ihr Projekt Akustik Team Projekt Akustik Schönberg GmbHTremskamp 51 - 51aD-23611 Bad Schwartau Geschäftsführer: Birger Schönberg, Tobias Schönberg und Torge Schönberg Amtsgericht Lübeck HRB 858 BS USt-ID-Nr.: DE 135123958ZSVR-Nummer: DE4122505792345 _gsrx_vers_1436 (GS 9.0.5 (1436))

Graham Audio Chartwell LS3/5A Speakers In Cherry Nearly New. Incredible speakers, selling as they are too revealing of the rest of my system (which is quite inferior!). Beautiful midrange and imaging, wonderful detail. Please note that this does not include the stands, however I would be happy to negotiate this if you are able to collect. Includes original box and packaging. Does not include anything else in the pictures such as the TV or cables (yes some people have asked that!)

These speakers are simply phenomenal. Beautiful, precise and accurate representation of what is coming out of your stereo. There are plenty of extremely positive reviews to read on the internet. My favourite one says these are probably the last speakers you will need. Play all music well, with better bass presentation than there smaller siblings. Light usage , though a few marks from moving around and some fading from the sun ( the grills have an influence on the sound as part of the design so should remain on). Only selling as got some unexpected bills to pay unfortunately. Will be buying another pair at a later date. Comes with all original packaging including covers

Excellent condition, box, packing, everything. Sound great. About 1 year old.

Graham Audio LS5/9f floor-standing speakers in natural oak finish. Ex demonstration pair in excellent condition. Supplied with the original packaging and accessories including grilles, floor spikes and cloth covers. Strictly Stereo is an authorised Graham Audio retailer. Description The Graham Audio LS5/9f is a development of the famous BBC LS5/9. The LS5/9f is the perfect choice for those who prefer floor-standing loudspeakers over the LS5/9s stand-mount form factor. However, the changes arent simply cosmetic. Yes, this model uses the same handmade bass/midrange driver from Volt along with the 34mm Audax tweeter, but the larger cabinet allows for increased bass extension and greater dynamic range. Based on feedback from customers and dealers, the soldered connections for tweeter level calibration found on the LS5/9 have been replaced with the discrete switch first seen in the LS6, which allows for subtle adjustment of the high frequency level. This is useful to help overcome difficulties presented by some acoustic environments, especially those with a lot of absorbent furnishings and finishes. The cabinet follows established BBC thinwall construction practice, and includes the integrated plinth with flow-optimised port first seen in the LS6f. As usual, the grille is held in place using hidden magnets. SpecificationsSystem: 2 Way, reflex loadingEnclosure: Thin wall constructionFinish: Natural oak real wood veneerDimensions: (W x H x D)35cm x 105cm x 37cm (including plinth)Weight: 25kgFrequency response: 40Hz to 16kHz, ±3dBNominal impedance: 8?Sensitivity: 87dB SPL (2.83V, 1m)Maximum output: Over 100dB for a pair at 2mBass/midrange: 200mm Diaphnatone polypropyleneTweeter: Audax HD13D34HRecommended amplifier power: 50 to 200 watts unclipped programme

A development of the famous BBC LS5/9, the LS5/9f is the perfect choice for those who prefer floor standing loudspeakers over the traditional stand-mount form factor.However, the changes aren’t simply cosmetic. Yes, this model uses the same handmade bass/mid-range driver from Volt along with the 34mm Audax tweeter as the regular LS5/9, both selected to the same tight tolerances. But the larger cabinet allows for increased bass extension and greater dynamic range. Based on positive feedback from customers and our dealer and distribution network, we have replaced the soldered connections for tweeter level calibration with the discrete switch first seen in the LS6, which allows for subtle adjustment of the high frequency level. This is useful to help overcome difficulties presented by some acoustic environments, especially those with a lot of absorbent furnishings and finishes. The cabinet follows established BBC “thinwall” construction practice, and includes the integrated plinth with flow-optimised port first seen in the LS6f. As usual, the grille is held in place using hidden magnets. A range of hand selected real wood veneers is available. Key FeaturesSystem: 2 Way, reflex loadingEnclosure: Thin wall construction, birch plywoodFrequency Response: 40Hz to 20kHz, ±2dBNominal Impedance: 8?Sensitivity: 89dB SPL (2.83V, 1m)Maximum Output: Over 100dB for a pair at 2mBass/Mid-Range: 200mm Diaphnatone polypropyleneTweeter: Son Audax HD13D34HRecommended Amplifier Power: 50 – 200 watts unclipped programmeDimensions (W/H/D): 35 x 105 x 37 cmWeight: 25 kg

GRAHAM AUDIO LS5/9 BBC LICENSED MONITOR SPEAKERS rrp £4k+ Boxed/complete SUPERB SOUNDfabulous monitor speakers hand built in the UK they have the most fantastic imaging and soundstageideal for broadcast and reference recording / mix downor high end hifi systemsthis pair are an ex-demo dealers set in cherry finishthere are a few feint marks but nothing drasticso a great chance to save well over two thousand pounds off the new price !buyer will be delightedUK shipping or Ebay gsp for worldwideyour own courier collection is also welcomed The BBC LS5/9The LS5/9 is a high quality studio monitor that was designed by BBC Research and Development and featured a brand new 8 inch bass/midrange drive unit that was developed entirely in-house and constructed using the best materials available at the time.Designed for use by the BBC in smaller studios and control rooms, the LS5/9 is a close sonic match for the larger LS5/8. Equally at home in a domestic setting, the open and expansive mid-range reveals previously unheard details from even the most familiar recordings.With Derek Hughes at the drawing board, the original BBC design has been recreated. A new bass/midrange driver has been developed in conjunction with Volt Loudspeakers which uses a substantial die-cast aluminium frame and a massive motor assembly, allied to a diaphragm formed from a selected grade of polypropylene and matched to a high quality rubber surround. Each bass driver is hand-assembled and tested by Volt.The tweeter is a selected version of the Audax 34mm soft dome, which is protected by a strong metal grille. A sophisticated crossover network blends the units together and equalises the overall response for optimum performance in free space.The cabinet uses classic BBC thinwall construction, and is manufactured in the UK from high quality 9mm birch plywood. Hand-matched veneers are applied and finished to a very high standard indeed. All joints in the cabinet are reinforced with hardwood batons to ensure long life and total air sealing. The panels are mass-loaded to ensure that resonances are moved away from the critical mid-range region, and a layer of Rockwool held in place by fabric provides air damping. The grille - machined from a single piece of 9mm birch plywood - is held in place by concealed rare-earth magnets.SpecificationsSystem2 Way, reflex loadingEnclosureThin wall construction, birch plywoodFinishReal wood veneerDimensions (w/h/d)28cm by 46cm by 27.5cmWeight14kgFrequency response50Hz to 16kHz, ±3dBNominal impedance8?Sensitivity87dB SPL (2.83V, 1m)Maximum outputOver 100dB for a pair at 2mBass/midrange200mm Diaphnatone polypropyleneTweeterSon Audax HD13D34HRecommended amplifier power50 to 200 watts unclipped programme

GRAHAM AUDIO LS5/9 BBC LICENSED MONITOR SPEAKERS rrp £4k+ Boxed/complete SUPERB SOUNDfabulous monitor speakers hand built in the UK they have the most fantastic imaging and soundstageideal for broadcast and reference recording / mix downor high end hifi systemsthis pair are an ex-demo dealers set that do show some sun fading to the cherry finishthere are a few light marks as pictured but nothing drasticso a great chance to save well over two thousand pounds off the new price !buyer will be delightedUK shipping or Ebay gsp for worldwideyour own courier collection is also welcomed The BBC LS5/9The LS5/9 is a high quality studio monitor that was designed by BBC Research and Development and featured a brand new 8 inch bass/midrange drive unit that was developed entirely in-house and constructed using the best materials available at the time.Designed for use by the BBC in smaller studios and control rooms, the LS5/9 is a close sonic match for the larger LS5/8. Equally at home in a domestic setting, the open and expansive mid-range reveals previously unheard details from even the most familiar recordings.With Derek Hughes at the drawing board, the original BBC design has been recreated. A new bass/midrange driver has been developed in conjunction with Volt Loudspeakers which uses a substantial die-cast aluminium frame and a massive motor assembly, allied to a diaphragm formed from a selected grade of polypropylene and matched to a high quality rubber surround. Each bass driver is hand-assembled and tested by Volt.The tweeter is a selected version of the Audax 34mm soft dome, which is protected by a strong metal grille. A sophisticated crossover network blends the units together and equalises the overall response for optimum performance in free space.The cabinet uses classic BBC thinwall construction, and is manufactured in the UK from high quality 9mm birch plywood. Hand-matched veneers are applied and finished to a very high standard indeed. All joints in the cabinet are reinforced with hardwood batons to ensure long life and total air sealing. The panels are mass-loaded to ensure that resonances are moved away from the critical mid-range region, and a layer of Rockwool held in place by fabric provides air damping. The grille - machined from a single piece of 9mm birch plywood - is held in place by concealed rare-earth magnets.SpecificationsSystem2 Way, reflex loadingEnclosureThin wall construction, birch plywoodFinishReal wood veneerDimensions (w/h/d)28cm by 46cm by 27.5cmWeight14kgFrequency response50Hz to 16kHz, ±3dBNominal impedance8?Sensitivity87dB SPL (2.83V, 1m)Maximum outputOver 100dB for a pair at 2mBass/midrange200mm Diaphnatone polypropyleneTweeterSon Audax HD13D34HRecommended amplifier power50 to 200 watts unclipped programme

GRAHAM AUDIO LS5/9F MONITOR SPEAKERS rrp £5k+ Boxed / complete CHERRY VENEER complete set in unused condition we opened them to take the detailed picturesone of the finest floor standing speakers these take all the wonderful accuracy of the BBC LS5/9 and enhance the clean low end extension very easy to system matchthe sound is breath takingglorious midrange detail and insightsmooth sweet treble and deep clean bassthe imaging is pinpoint and the soundstage is wide possibly the best floor standing speaker design we have heard regardless of price buyer will be delighted !and save over two thousand pounds from the normal retail pricedemo in store welcome worldwide shipping is by the Ebay GSP or collection is welcome The LS5/9fA development of the famous BBC LS5/9, the LS5/9f is the perfect choice for those who prefer floor standing loudspeakers over the traditional stand-mount form factor.However, the changes arent simply cosmetic. Yes, this model uses the same handmade bass/midrange driver from Volt along with the 34mm Audax tweeter as the regular LS5/9, both selected to the same tight tolerances. But the larger cabinet allows for increased bass extension and greater dynamic range.Based on positive feedback from customers and our dealer and distribution network, we have replaced the soldered connections for tweeter level calibration with the discrete switch first seen in the LS6, which allows for subtle adjustment of the high frequency level. This is useful to help overcome difficulties presented by some acoustic environments, especially those with a lot of absorbent furnishings and finishes.The cabinet follows established BBC thinwall construction practice, and includes the integrated plinth with flow-optimised port first seen in the LS6f. As usual, the grille is held in place using hidden magnets. A range of hand selected real wood veneers is available.SpecificationsSystem2 Way, reflex loadingEnclosureThin wall constructionFinishReal wood veneerDimensions (w/h/d)35cm by 105cm by 37cm (including plinth)Weight25kgFrequency response40Hz to 16kHz, ±3dBNominal impedance8?Sensitivity87dB SPL (2.83V, 1m)Maximum outputOver 100dB for a pair at 2mBass/midrange200mm Diaphnatone polypropyleneTweeterSon Audax HD13D34HRecommended amplifier power50 to 200 watts unclipped programme

GRAHAM AUDIO LS5/9 BBC LICENSED MONITOR SPEAKERS rrp £4k+ Boxed/complete SUPERB SOUNDfabulous monitor speakers hand built in the UK they have the most fantastic imaging and soundstageideal for broadcast and reference recording / mix downor high end hifi systemsthese examples feature the lovely light teak finish that looks amazing and is a higher cost optionone tiny mark on the back that is hard to spotbuyer will be deighteduk shipping or Ebay gsp for worldwideyour own courier collection is also welcomed The BBC LS5/9The LS5/9 is a high quality studio monitor that was designed by BBC Research and Development and featured a brand new 8 inch bass/midrange drive unit that was developed entirely in-house and constructed using the best materials available at the time.Designed for use by the BBC in smaller studios and control rooms, the LS5/9 is a close sonic match for the larger LS5/8. Equally at home in a domestic setting, the open and expansive mid-range reveals previously unheard details from even the most familiar recordings.With Derek Hughes at the drawing board, the original BBC design has been recreated. A new bass/midrange driver has been developed in conjunction with Volt Loudspeakers which uses a substantial die-cast aluminium frame and a massive motor assembly, allied to a diaphragm formed from a selected grade of polypropylene and matched to a high quality rubber surround. Each bass driver is hand-assembled and tested by Volt.The tweeter is a selected version of the Audax 34mm soft dome, which is protected by a strong metal grille. A sophisticated crossover network blends the units together and equalises the overall response for optimum performance in free space.The cabinet uses classic BBC thinwall construction, and is manufactured in the UK from high quality 9mm birch plywood. Hand-matched veneers are applied and finished to a very high standard indeed. All joints in the cabinet are reinforced with hardwood batons to ensure long life and total air sealing. The panels are mass-loaded to ensure that resonances are moved away from the critical mid-range region, and a layer of Rockwool held in place by fabric provides air damping. The grille - machined from a single piece of 9mm birch plywood - is held in place by concealed rare-earth magnets.SpecificationsSystem2 Way, reflex loadingEnclosureThin wall construction, birch plywoodFinishReal wood veneerDimensions (w/h/d)28cm by 46cm by 27.5cmWeight14kgFrequency response50Hz to 16kHz, ±3dBNominal impedance8?Sensitivity87dB SPL (2.83V, 1m)Maximum outputOver 100dB for a pair at 2mBass/midrange200mm Diaphnatone polypropyleneTweeterSon Audax HD13D34HRecommended amplifier power50 to 200 watts unclipped programme

GRAHAM AUDIO BBC LS5/8 S LICENSED MONITOR SPEAKERS with Broadcast stands rrp £8k+superb sounding reference monitors with ultra clear midband deep true bass and sweet trebleDerek Hughes designed passive crossovers and the super rare slotted bafflesthese sound incredible a few light marks as the items are ex-demothere is a little sun fade to the cabinets they are approx 2 years oldeach speaker is boxed so you can arrange your own courier via the shiply website or another of your choicethey come with a matching set of Broadcast stands that compliment the thin wall design of the cabinetsdemo welcome in our high street hifi shop in South Devon UKpersonal collection and possible PX welcome very rare opportunity to be able to purchase a pair of these Slotted models as they are custom built to order The BBC LS5/8The LS5/8 is the BBCs flagship design, and was developed because of the need for higher sound pressure levels and greater transparency and consistency than the ageing LS5/5 offered. This was the first BBC loudspeaker to use a polypropylene diaphragm which, being lighter than Bextrene, offered greater efficiency and lower colouration. A carefully researched cone profile enables the unit to work successfully well into the midrange.After many months of intensive development, the Graham Audio LS5/8 refines the concept further. Designed in conjunction with Derek Hughes and Volt Loudspeakers and manufactured under license in the UK, it features a unique 12 inch bass/mid unit that is married to the same 34mm Audax tweeter that is used in the LS5/9.As with all our BBC monitors, the cabinet is a finely tuned structure that uses high quality birch plywood and hardwood batons. The 12mm panels are mass-loaded to move resonances away from the midrange region and Rockwool is used in preference to cheap foam for air damping.The design retains the same midrange clarity and balance of the LS5/9, but offers an extended bass response and greater authority at high level in larger rooms. The continuity of sound quality between the two designs means that engineers can move between the two different loudspeakers with complete confidence during the recording and mastering process.The LS5/8 was originally conceived as an active design, but Derek Hughes has designed a passive crossover that greatly improves on the resolution and imaging of the original design while still conforming to the demanding BBC specification.SpecificationsSystem2 Way, reflex loadingEnclosureThin wall construction, birch plywoodFinishReal wood veneerDimensions (w/h/d)46cm by 76cm by 40cmWeight34kgFrequency response40Hz to 16kHz, ±3dBNominal impedance8?Sensitivity89dB SPL (2.83V, 1m)Maximum outputOver 110dB for a pair at 2mBass/midrange300mm Diaphnatone polypropyleneTweeterSon Audax HD13D34HRecommended amplifier power50 to 250 watts unclipped programmeMounting drive units behind slotsThis technique is rarely seen today, but many decades ago it was widely used by the BBC and others. The results are surprisingly effective, but their operation is highly counter-intuitive.What problems are the slots addressing?At low frequencies, a drive unit will radiate sound widely. However, as you go up in frequency, the radiation pattern becomes more directional, like a spot light. The diameter of the diaphragm determines the frequency area where this takes place.When performing or analysing loudspeaker measurements, it is natural to concentrate on the axial response - that is, the response measured with the microphone placed in front of the loudspeaker. However, in a listening room, you dont just hear the axial, or direct sound. Rather, what you hear is a mixture of the direct sound and the relected sound. This reflected sound might have emerged from the loudspeaker at an angle of, say, 45 degrees, before it hit the side wall and bounced off in your general direction. In practice, your ears will pick up many reflected versions of the direct sound - all arriving at slightly different times. Its remarkable that we are able to make any sense of it all, but the human hearing system is an amazing thing!So as the overall impression you form when listening to a loudspeaker in a listening room is a product of both the direct and reflected sound, the designer must pay as much attention to the off-axis response as he or she pays to the direct, axial response. It also explains one of the reasons why two different loudspeakers with very similar axial responses can sound quite different to one another. And, perhaps surprisingly, this is something that BBC R&D were very much aware of back in the 1960s and before, when large (12 or 15 inches) drive units were the norm.How the slot helpsIts easy to assume that a slot in front of a drive unit will make the radiation pattern become tighter. More focused, if you prefer. However - and this is the part that is non-intuitive - it actually does the opposite!Placing a slot in front of a loudspeaker makes the unit behave like a smaller unit. In other words, the point at which it starts to become directional is changed to a higher frequency. This makes a useful difference to the off-axis response, and so in a room, you hear a smoother frequency response through the crossover region.To explain further, let us consider the transition between the midrange drive unit and the tweeter. At low frequencies - say, 500Hz - the 8 inch midrange used in the LS5/5 will have a fairly broad radiation pattern, meaning that it will radiate energy in many directions, in a fairly even fashion. But as you go up in frequency - say, to 2kHz - the drive unit becomes more directional. Measured on-axis, the output level should still be healthy, but at 45 degrees away from this, the output will be substantially less. So at these sorts of frequencies, the ear is mostly hearing the sound directly, and the reflected sound will be missing a lot of energy by comparison.But consider what happens at a higher frequency, such as 4kHz. Here the midrange driver is contributing much less and the bulk of the energy is coming from the tweeter. And of course, the tweeter has a much smaller diaphragm (only 1 inch), which is small relative to the wavelength of 4kHz (about 3½). As a result, the tweeter radiates its sound widely - just like the mid-range was doing down at 500Hz.So without the slot, there is a substantial dip in the total energy being generated by the loudspeaker in the mid-range region before the tweeter takes over. Subjectively, we might not be terribly bothered by the overall response falling away here, but we very definitely will notice the sudden arrival of the tweeters off-axis contribution. Most people will perceive that as unwanted brightness or hardness, despite what the axial measurement tells us.And of course, the LS5/5 is a three way design, so this also happens in the upper bass/lower midrange area because the 12 inch woofer is also suffering from the same increase in directivity at the upper range of its operation!But great care must be taken to optimise these slots. If they are too narrow, there is a risk of resonances occuring between the rear of the front panel and the diaphragm. The ideal spacing between the baffle and the diaphragm (and the surround) must be carefully determined with detailed measurements. The thickness of the timber left after the machining operations is also critical. But having researched and built on the original work that went into the design of the LS5/5, we are left wondering why this approach isnt more commonly used today. Aside from the obvious aesthetic concerns, of course.ConclusionAdding the slots makes for a much smoother power response, which is the combination of the on-axis and off-axis frequency responses. A smooth power response leads to easier placement in typical listening environments.Having demonstrated the new LS5/5 in a number of shows and events, we are well used to seeing the reactions of enthusiasts when they see the front of the LS5/5 for the first time. But, we are also accustomed to their reactions when they hear the design! Much as these slots go against all current conventions, they really do work.

These speakers are in very good condition, about 3 years old, boxes, packing. They will be securely triple boxed and insured for purchase price plus shipping.

GRAHAM AUDIO CHARTWELL LS6/F MONITOR SPEAKERS * BOXED * ROSEWOOD finish rrp £4500+ stunning pair of unused British monitor speakers hand built in Devon UK TONS OF REVIEWS ONLINEone of the nicest floor standing designs you can buybuyer will be delightedWorldwide shipping is by the Ebay GSPor you can arrange your own courierThe Chartwell LS6/fBuilding on the success of our popular LS6 monitor, the LS6/f is a floor-standing loudspeaker system that combines a modern aesthetic with the open, uncoloured sound youd expect from a Graham Audio system.The integrated plinth provides a flow-optimised path for the airflow from the port, reducing distortion at high outputs.The LS6/f uses the same custom drive units as the stand-mount LS6 and has an optimised crossover network using premium quality components to integrate the acoustic output from both drive units and equalise the overall response for optimum performance in free space. A switch on the front panel adds 1 or 2dB to the tweeter level, which might be advantageous in certain acoustic environments.In common with all our loudspeakers, the cabinet uses the classic BBC thinwall construction, where the panels are mass-loaded to ensure that resonances are moved away from the critical mid-range region, and a layer of Rockwool is held in place by fabric to provide air damping. Hand-matched veneers are applied and finished to a very high standard. The grille is carefully designed to minimise diffraction effects and is held in place by concealed rare-earth magnets.SpecificationsSystem2 Way, reflex loadingEnclosureThin wall damped constructionFinishReal wood veneerDimensions (w/h/d)96cm by 32cm by 32cm (including plinth)Weight21kgFrequency response40Hz to 20kHz, ±2dBNominal impedance8?Sensitivity87dB SPL (2.83V, 1m)Maximum outputOver 100dB for a pair at 2mBass/midrange165mm polypropyleneTweeter19mm dome tweeterRecommended amplifier power50 to 150 watts unclipped programme

GRAHAM AUDIO CHARTWELL LS6/F MONITOR SPEAKERS * BOXED * EBONY finish rrp £4500+ stunning pair of unused British monitor speakers hand built in Devon UK TONS OF REVIEWS ONLINEone of the nicest floor standing designs you can buybuyer will be delightedWorldwide shipping is by the Ebay GSPor you can arrange your own courierThe Chartwell LS6/fBuilding on the success of our popular LS6 monitor, the LS6/f is a floor-standing loudspeaker system that combines a modern aesthetic with the open, uncoloured sound youd expect from a Graham Audio system.The integrated plinth provides a flow-optimised path for the airflow from the port, reducing distortion at high outputs.The LS6/f uses the same custom drive units as the stand-mount LS6 and has an optimised crossover network using premium quality components to integrate the acoustic output from both drive units and equalise the overall response for optimum performance in free space. A switch on the front panel adds 1 or 2dB to the tweeter level, which might be advantageous in certain acoustic environments.In common with all our loudspeakers, the cabinet uses the classic BBC thinwall construction, where the panels are mass-loaded to ensure that resonances are moved away from the critical mid-range region, and a layer of Rockwool is held in place by fabric to provide air damping. Hand-matched veneers are applied and finished to a very high standard. The grille is carefully designed to minimise diffraction effects and is held in place by concealed rare-earth magnets.SpecificationsSystem2 Way, reflex loadingEnclosureThin wall damped constructionFinishReal wood veneerDimensions (w/h/d)96cm by 32cm by 32cm (including plinth)Weight21kgFrequency response40Hz to 20kHz, ±2dBNominal impedance8?Sensitivity87dB SPL (2.83V, 1m)Maximum outputOver 100dB for a pair at 2mBass/midrange165mm polypropyleneTweeter19mm dome tweeterRecommended amplifier power50 to 150 watts unclipped programme

GRAHAM AUDIO CHARTWELL LS6/F MONITOR SPEAKERS * BOXED * ROSEWOOD finish rrp £4500+ stunning pair of unused British monitor speakers hand built in Devon UK TONS OF REVIEWS ONLINEone of the nicest floor standing designs you can buybuyer will be delightedWorldwide shipping is by the Ebay GSPor you can arrange your own courierThe Chartwell LS6/fBuilding on the success of our popular LS6 monitor, the LS6/f is a floor-standing loudspeaker system that combines a modern aesthetic with the open, uncoloured sound youd expect from a Graham Audio system.The integrated plinth provides a flow-optimised path for the airflow from the port, reducing distortion at high outputs.The LS6/f uses the same custom drive units as the stand-mount LS6 and has an optimised crossover network using premium quality components to integrate the acoustic output from both drive units and equalise the overall response for optimum performance in free space. A switch on the front panel adds 1 or 2dB to the tweeter level, which might be advantageous in certain acoustic environments.In common with all our loudspeakers, the cabinet uses the classic BBC thinwall construction, where the panels are mass-loaded to ensure that resonances are moved away from the critical mid-range region, and a layer of Rockwool is held in place by fabric to provide air damping. Hand-matched veneers are applied and finished to a very high standard. The grille is carefully designed to minimise diffraction effects and is held in place by concealed rare-earth magnets.SpecificationsSystem2 Way, reflex loadingEnclosureThin wall damped constructionFinishReal wood veneerDimensions (w/h/d)96cm by 32cm by 32cm (including plinth)Weight21kgFrequency response40Hz to 20kHz, ±2dBNominal impedance8?Sensitivity87dB SPL (2.83V, 1m)Maximum outputOver 100dB for a pair at 2mBass/midrange165mm polypropyleneTweeter19mm dome tweeterRecommended amplifier power50 to 150 watts unclipped programme