Clean Infinity RS 4000 Speaker Grill Cover

INFINITY RS-4000 SPEAKER PARTS. both crossovers, 2 horn speakers, and one woofer, all worked, cabinets were in bad shape so i salvaged these parts for someone that can use them,

INFINITY RS-4000 SPEAKER PARTS. both crossovers, 2 horn speakers, and one woofer, all worked, cabinets were in bad shape so i salvaged these parts for someone that can use them,

Infinity RS4000 Highend-Lautsprecher. 2 Stück (1 Paar). Achtung: Beim Tieftöner und Mitteltöner sind die Sicken defekt.Ton kommt aus allen Lautsprechern heraus. Der Klang ist sehr gut. Es müssten einfach die Sicken gemacht werden. Optisch sehr guter bis guter gebrauchter Zustand mit normalen Gebrauchsspuren. Siehe Fotos. Kein Zubehör dabei. Maße ca.: Höhe 57,3cm, Breite 31,8cm, Tiefe 27cm. Gewicht 1 Stück: ca. 12,5 Kg. Abholung möglich. Europaweiter Versand. Alle Markennamen, Warenzeichen bzw. eingetragenen Warenzeichen sind Eigentum Ihrer rechtmäßigen Eigentümer und dienen hier nur der Geräte-Identifikation. Irrtum und Darstellungsfehler vorbehalten

INFINITY RS-4000 SPEAKER PARTS. both crossovers, 2 horn speakers, and one woofer, all worked, cabinets were in bad shape so i salvaged these parts for someone that can use them,

INFINITY RS-4000 SPEAKER PARTS. both crossovers, 2 horn speakers, and one woofer, all worked, cabinets were in bad shape so i salvaged these parts for someone that can use them,

INFINITY RS-4000 SPEAKER PARTS. both crossovers, 2 horn speakers, and one woofer, all worked, cabinets were in bad shape so i salvaged these parts for someone that can use them,

Offered for your consideration is a vintage pair of Infinity three-way crossover networks with mid and high-range attenuators removed from my Reference Standard 4001 speakers, manufactured c.1991. The RS3000 are great-sounding speakers that use 8” graphite cone woofers (6?) crossed-over to 2” dome midrange drivers (4?) and ¾” dome tweeters (6?) at 600Hz and 4kHz, respectively. Please take a look at my large photos and read the remaining description to decide if these superb Infinity dividing networks are correct for your needs. This pair of Infinity RS4001 crossovers is in clean, excellent condition. The sturdy plastic faceplates have no cracks, scratches, or even scuffs. Plus, the crossovers are constructed with a heavily-wound copper inductor, large capacitors, resistors, thick driver wiring, and potentiometers for midrange and tweeter level adjustment. And I’ve neatly separated the wires, binding them in pairs with ties, for the new owner’s convenience upon delivery. Overall, these crossovers are exceptionally well preserved. Most importantly, they were tested in the factory cabinets and function perfectly. The RS4001 are rated to 125 watts power handling and a frequency range of 44Hz to 22kHz at a nominally-rated 6 ohm load. Lastly, the faceplates measure 5?” wide by 4½” tall, they go about 3½” deep into the cabinets, and the mounting holes are spaced 5¼” long way / 4” short-way apart, c-t-c. These are a nice find for someone with RS4001’s that have a damaged input terminal(s) or crossover component. Theyre also ready for action in a three-way speaker-building project with the suitable drivers of your choice! So, as pictured and described, this exceptional pair of Infinity RS4001 crossover networks is offered at a competitive price. Terms of Sale: I encourage interested parties to ask any questions they may have about this listing before committing to purchase. Payment is due at checkout by PayPal or other accepted methods. U.S. mailing addresses will pay $14.95 for very carefully packed shipping via U.S. Postal Service, FedEx, or UPS with tracking and delivery confirmation. International purchases accepted only from those who are able to pay with PayPal including shipping by U.S. Postal Service First Class Parcel Air Mail. Thanks for looking!

Infinity RS-4000 Crossovers . Three way crossover Networks. Track Page Views WithAuctivas Counter

Offered for your consideration is a pair of vintage Infinity #902-4165 8 inch IMG (injection molded graphite) cone woofers removed from my RS4001 speakers, manufactured c.1991. These capable mid/bass drivers were also used in the RS5001, RS6001, and possibly some other high-end Infinity speakers of the period, but the buyer is responsible for accurately verifying their suitability for any models other than those three from the RS-series. So, please see my large photos and read the remaining description to decide if these splendid Infinity woofers are correct for your needs. This pair of Infinity 902-4165 woofers is in clean, excellent condition. The graphite cones are structurally perfect and so are the original voice coil cover center caps. Plus, the black anodized steel baskets are well preserved with no dings, scratches, or oxidation. Most importantly, the aged original polyurethane suspension was just replaced with modern polyether foam surrounds. Many speaker companies used foam for their woofer surrounds from the mid 1970’s through 1990’s. Foam offers superior excursion to coated linen and rubber surrounds, but invariably falls apart in 12-20 years no matter what climate you live in. These woofers were no exception—the surrounds were sticky rotted and coming off of the cone with pieces missing. And, as I’m sure most know, proper cone suspension is very important—if you play woofers with faulty surrounds for too long they’ll start to rub the voice coils and ruin them in a short time, so surround replacement is critical. Some of you have replaced woofer surrounds before, so you know it’s a time-consuming process that takes a great deal of patience and a steady hand. First, I carefully removed the plastic flange gaskets which can be difficult because of the aggressive hot glue the factory used. One came off cleanly, the other took a good deal of prying which marred the inner perimeter, but neither broke which is a win with these. Next, I carefully cleaned the cones’ edges and basket flanges to remove the old gummy foam and stubborn factory adhesives, which takes some time to do correctly, and then glued the inner surrounds to the cones. Then, I glued the outer surrounds to the basket flanges after verifying no coil rub. Lastly, the flange gaskets were reapplied. I allowed overnight drying of the acrylic glue between each of the steps to achieve the perfect results you see here. Now these woofers are in great shape once again—perhaps even better than new with the modern polyether foam surrounds! Most importantly, these woofers have been fully tested after refoaming and sound terrific—strong and very clear with fast, detailed midrange and good bass response for the platform size. Plus, their DC resistance tested at a perfectly-matched 4.3? each, consistent with a nominal 6 ohm driver rating. Lastly, the baskets measure 8½” (with flange cover in place), they stand around 3¾” tall, and the mount holes are spaced 5?” adjacent / 8” diagonal apart, c-t-c. In closing, this is a great find if your RS4001 or other suitable Infinity sits idle with decayed surrounds, or has a blown woofer(s), etc. Your speakers will be sounding like new once again! As pictured and described, this pair of Infinity 8” woofers with painstakingly restored surrounds is offered at a competitive price. Terms of Sale: I encourage interested parties to ask any questions they may have about this listing before committing to purchase. Payment is due at checkout by PayPal or other accepted methods. U.S. mailing addresses will pay $17.95 for very carefully packed shipping via U.S. Postal Service, FedEx, or UPS with tracking and delivery confirmation. International purchases accepted only from those who are able to pay with PayPal and other forms including shipping by U.S. Postal Service Global Priority Air Mail. Thanks for looking! *the photo above is presented only for donor model reference

infinity 3000 4000 midrange speakers. Excellent condition

Another item from Ricky Young, Quality Artifacts, Springfield, Vermont. This item is Vintage with signs of age and previous use that are shown in the pictures. Please review the pictures carefully for more details.Additional Notes: Removed from a working RS-4000 speaker. It has normal signs of previous use.Dimensions: 5.25 OD, 4 hole diameter, 2.75 depth excluding wiresUnpacked weight & size: 1.25, 5x5x3Packed weight & size: 2, 8x8x6Package Notes & Ref: 2L83, MF, 21.98s:Note: Unless specifically indicated otherwise, the shipping charge quoted is to addresses in the contiguous 48 United States. Please email for a shipping quote to Alaska, Hawaii, US territories, and international destinations. This particularly applies if the shipping charge is zero ($0).:Please note that our liability for product defects is limited to the purchase price plus shipping. We are not responsible for the installation, training in the use of, or operation of any item we sell. The buyer assumes all responsibility for safely handling, inspecting and verifying the operational quality of their purchases prior to putting them into service. The buyer expressly releases the seller from any liability arising from the installation or operation of the product.:We appreciate your business. Our Standard Shipping method is our choice of USPS, FedEx or Motor Freight. Unfortunately, because we have very limited space, we cannot store your purchased items for you. For local pickup, we can hold your item for two weeks (or as agreed upon beforehand in writing) from the purchase date, after which we have to charge storage, up to $10 per day, depending on the situation. Once storage fees exceed any moneys paid, we will have to relist the item without refund.

Another item from Ricky Young, Quality Artifacts, Springfield, Vermont. This item is Used with signs of previous use and handling that are shown in the pictures. Please review the pictures carefully for more details.Additional Notes: The speaker needs new foam surrounds. It is in good working condition otherwise, with normal signs of previous use.Dimensions: 4-1/2 outside diameter, 3-1/4 hole diameter, 5-3/8 deepUnpacked weight & size: 1.35, 4.5x4.5x5.5Packed weight & size: 3, 8x8x8Package Notes & Ref: 2L84, MF, 25.98s:Note: Unless specifically indicated otherwise, the shipping charge quoted is to addresses in the contiguous 48 United States. Please email for a shipping quote to Alaska, Hawaii, US territories, and international destinations. This particularly applies if the shipping charge is zero ($0).:Please note that our liability for product defects is limited to the purchase price plus shipping. We are not responsible for the installation, training in the use of, or operation of any item we sell. The buyer assumes all responsibility for safely handling, inspecting and verifying the operational quality of their purchases prior to putting them into service. The buyer expressly releases the seller from any liability arising from the installation or operation of the product.:We appreciate your business. Our Standard Shipping method is our choice of USPS, FedEx or Motor Freight. Unfortunately, because we have very limited space, we cannot store your purchased items for you. For local pickup, we can hold your item for two weeks (or as agreed upon beforehand in writing) from the purchase date, after which we have to charge storage, up to $10 per day, depending on the situation. Once storage fees exceed any moneys paid, we will have to relist the item without refund.

Offered for your consideration is a pair of vintage Infinity #902-4165 8 inch IMG (injection molded graphite) cone woofers removed from my RS4001 speakers, manufactured c.1991. These capable mid/bass drivers were also used in the RS5001, RS6001, and possibly some other high-end Infinity speakers of the period, but the buyer is responsible for accurately verifying their suitability for any models other than those three from the RS-series. So, please see my large photos and read the remaining description to decide if these splendid Infinity woofers are correct for your needs. This pair of Infinity 902-4165 woofers is in clean, excellent condition. The graphite cones are structurally perfect and so are the original voice coil cover center caps. Plus, the black anodized steel baskets are well preserved with no dings, scratches, or oxidation. Most importantly, the aged original polyurethane suspension was just replaced with modern polyether foam surrounds. Many speaker companies used foam for their woofer surrounds from the mid 1970’s through 1990’s. Foam offers superior excursion to coated linen and rubber surrounds, but invariably falls apart in 12-20 years no matter what climate you live in. These woofers were no exception—the surrounds were sticky rotted and coming off of the cone with pieces missing. And, as I’m sure most know, proper cone suspension is very important—if you play woofers with faulty surrounds for too long they’ll start to rub the voice coils and ruin them in a short time, so surround replacement is critical. Some of you have replaced woofer surrounds before, so you know it’s a time-consuming process that takes a great deal of patience and a steady hand. First, I carefully removed the plastic flange gaskets which can be difficult because of the aggressive hot glue the factory used. One came off cleanly, the other took a good deal of prying which marred the inner perimeter, but neither broke which is a win with these. Next, I carefully cleaned the cones’ edges and basket flanges to remove the old gummy foam and stubborn factory adhesives, which takes some time to do correctly, and then glued the inner surrounds to the cones. Then, I glued the outer surrounds to the basket flanges after verifying no coil rub. Lastly, the flange gaskets were reapplied. I allowed overnight drying of the acrylic glue between each of the steps to achieve the perfect results you see here. Now these woofers are in great shape once again—perhaps even better than new with the modern polyether foam surrounds! Most importantly, these woofers have been fully tested after refoaming and sound terrific—strong and very clear with fast, detailed midrange and good bass response for the platform size. Plus, their DC resistance tested at a perfectly-matched 4.3? each, consistent with a nominal 6 ohm driver rating. Lastly, the baskets measure 8½” (with flange cover in place), they stand around 3¾” tall, and the mount holes are spaced 5?” adjacent / 8” diagonal apart, c-t-c. In closing, this is a great find if your RS4001 or other suitable Infinity sits idle with decayed surrounds, or has a blown woofer(s), etc. Your speakers will be sounding like new once again! As pictured and described, this pair of Infinity 8” woofers with painstakingly restored surrounds is offered at a competitive price. Terms of Sale: I encourage interested parties to ask any questions they may have about this listing before committing to purchase. Payment is due at checkout by PayPal or other accepted methods. U.S. mailing addresses will pay $17.95 for very carefully packed shipping via U.S. Postal Service, FedEx, or UPS with tracking and delivery confirmation. International purchases accepted only from those who are able to pay with PayPal and other forms including shipping by U.S. Postal Service Global Priority Air Mail. Thanks for looking! *the photo above is presented only for donor model reference

Infinity TSS-SUB4000 msrp 1,249 dollars. In great working condition has some scratches but still works like a champ. 400 watt rms very loud and will rattle thing at low volume. Has high Excursion driver this was the top model in the Infinity series and was 1,249 dollars new.

Infinity TSS-SUB4000 msrp 1,249 dollars. In great working condition has some scratches but still works like a champ. 400 watt rms very loud and will rattle thing at low volume. Has high Excursion driver this was the top model in the Infinity series and was 1,249 dollars new.

Elevate your home audio experience with this top-of-the-line 5.0 channel speaker set from Infinity. Designed to deliver crystal-clear sound, this speaker set is perfect for creating an immersive home theatre or music listening experience. The speakers are crafted with premium materials and boast a sleek design that blends seamlessly with any home decor. This set features Infinitys renowned quality and reliability, with a brand that has been trusted by audiophiles for years. The brands commitment to excellence is evident in every aspect of this speaker set, from its powerful performance to its stylish aesthetic. Whether youre looking to upgrade your entertainment system or simply enhance your music listening experience, this Infinity Tss 4000 5 channel speaker set is the perfect choice for you. Made of solid aluminum very well constructed.

Offered for your consideration is a vintage Infinity #902-4130 ¾ inch (19mm) Polyspherite dome tweeter, removed from my RS4001 speakers, manufactured c.1989. This tweeter was also used in the RS2001, RS3001, and likely some other Infinity models from this period. So, please have a look at my large photos and read the remaining description to decide if this capable Infinity high frequency driver is correct for your needs. *Although the listing is written largely in singular to avoid any confusion, two (2) identical Infinity 902-4130 tweeters are available for purchase at time of this writing. Please choose if you’d like to buy one or both in the quantity field at the top of the listing. The shipping cost will be automatically calculated by eBay checkout. This Infinity Polyspherite tweeter is in clean, excellent condition. It has a perfect dome and the faceplate has no scratches or cracks. Plus, the magnet structure is free of chips or oxidation. And, the +/- input terminals are marked for polarity (red = positive) and have never been soldered on the spades. Overall, this tweeter looks practically new! Most importantly, it sounds terrific—strong, clear, and very sparkly with its impressive 22kHz upper limit. Plus, as rated to 125W in the RS4001, it’s a sturdy design as well. And, I tested its DC resistance at 5.6-5.7?, consistent with a 6 ohm nominal driver rating. Lastly, the faceplate measures 3 11/16” diameter, it stands 1” tall, and the three mounting holes are 2?” apart, c-t-c. This is a nice find for someone that has a blown or damaged tweeter in their RS4001 or other suitable model. And, long out of production, it would make a smart spare to have on hand for possible future needs. As pictured and described, this outstanding Infinity ¾” Polyspherite dome tweeter is offered at a competitive price. Terms of Sale: I encourage interested parties to ask any questions they may have about this listing before committing to purchase. Payment is due at checkout by PayPal or other accepted methods. U.S. mailing addresses will pay $8.95 for very carefully packed shipping via U.S. Postal Service with tracking and delivery confirmation. International purchases accepted only from those who are able to pay with PayPal, including shipping by U.S. Postal Service First Class Parcel Air Mail. Thanks for looking! *the above photo is presented only for donor model reference

Offered for your consideration is a vintage Infinity #902-4144 2 inch Polyspherite dome midrange driver removed from my RS4001 loudspeakers, manufactured c.1991. The 902-4144 was also used in the RS5001 and RS6001. So, please take a look at my large photos, the measurements, and read the remaining description to decide if this superb Infinity mid driver should be yours. *Although the listing is written largely in singular to avoid any confusion, two (2) identical Infinity 902-4144 midranges are available for purchase at time of this writing. Please choose if you’d like to buy one or both in the quantity field at the top of the listing. The shipping cost will be automatically calculated by eBay checkout. This Infinity dome midrange is in clean, excellent condition. It has a perfect radiating surface with no dings or dimples. Plus, the faceplate has no cracks or scratches. And, the industry-standard .205” +/- terminals are marked for polarity (red line side = pos) and have never been soldered on the spades. Overall, this Infinity mid looks practically new! Most importantly, it has been fully tested and sounds very clear, with fast, detailed response in the critical midrange frequencies. Plus, I tested its DC resistance at 3.8? consistent with a 4 ohm nominal driver rating. Lastly, the faceplate measures 4?” diameter, it stands about 2?” tall (incl. the dome), and the mount holes are spaced 3?” adjacent / 4¼” diagonal apart, c-t-c. This is a nice find for someone that has a blown or damaged dome midrange(s) in their RS4001 or other suitable c.1989-91 Infinity Reference Series model—your speakers will be sounding their best again in no time! Long out-of-production, it would also make a smart spare to have for future needs. As described, this remarkable Infinity 2” Polyspherite dome midrange driver is offered at a competitive price. Terms of Sale: I encourage interested parties to ask any questions they may have about this listing before committing to purchase. Payment is due at checkout by PayPal or other accepted methods. U.S. mailing addresses will pay $9.95 for very carefully packed shipping via U.S. Postal Service with tracking and delivery confirmation. International purchases accepted only from those who are able to pay with PayPal, including shipping by U.S. Postal Service First Class Parcel Air Mail. Thanks for looking! *the above photo is presented only for donor model reference

Infinity TSS-SUB4000 msrp 1,249 dollars. In great working condition has some scratches but still works like a champ. 400 watt rms very loud and will rattle thing at low volume. Has high Excursion driver this was the top model in the Infinity series and was 1,249 dollars new.

Infinity TSS-SUB4000 msrp 1,249 dollars. In great working condition has some scratches but still works like a champ. 400 watt rms very loud and will rattle thing at low volume. Has high Excursion driver this was the top model in the Infinity series and was 1,249 dollars new.

2 x Infinity 8 IMG Graphite Membran Basslautsprecher 902-4165A / 70920 für RS 3001 4001 5001in OVP Unbenutzt, 100% i.O. und in OVP. Versand gut verpackt per DHL. Wichtiger Hinweis: Da es sich hier um eine Privatauktion handelt kann leider keine Rücknahme oder Garantieleistung angeboten werden. Bei den eingestellen Fotos handelt es sich um Originalaufnahmen des angebotenen Produkts. Alle Angaben nach bestem Wissen und Gewissen. Bieten Sie bitte nicht, wenn Sie mit diesen Bedingungen nicht einverstanden sind. Vielen Dank!.

Speakers have High end ceramic drivers including the tweeter. The Speakers are in very nice condition has gloss silver finish. 150 watt rms for speakers, 400 rms high Excursion subwoofers. The two subwoofers act as a stand, there is a silver subwoofer and black so subwoofers are different color you could maybe spray paint one to match, subwoofers have a metal front baffles and durable veneer. The Speakers were 1000 dollars each when new subwoofers were about that or more new. Has heavy cast aluminum stands of really thick aluminum. Speakers come with speaker wire 12gauge and a large roll of 12gauge speaker wire twisted with white sleeve, comes with spade connectors or you can use bare wire. Comes with hi end subwoofer cables 2 of them.The subwoofers have a high Excursion woofer that is aluminum, with 400 rms amp. I collect crystals and everything ratles at low volume. High spl subwoofers. Now Ill list the undesirables which is not much, the speakers are perfect except for one nick of the edge which can only be seen from the side. A curious child put small dent in tweeters that does not effect the sound quality and I can not tell the difference, if you want you could take tape and try to pull out the dent but I did not do that because I ca t tell the difference. The subs cones are in perfect condition but the outer box has some small dents on some of the rear corners which doesnt effect sound quality and can only be seen from the back. The Speakers come down to 80 hz so you need to use the 2 subwoofers.