IotaVX PA3 power amplifier for sale *MINT* condition, very lightly used in a second system.Impressive power amplifier that punches above its price class. Purchased new directly from Iotavx. I ran this with a separate Weiliang Audio 6010D Line preamplifier using a variety of speakers: KEF LS50Meta, KEF R3, Falcon Acoustics LS3/5a. Excellent, like new, in mint condition with all the factory packaging, manual and power cable. I take very good care of my equipment.Due to downsizing, I need to consolidate my audio gear so I’m selling this lovely, mint condition Iotavx PA3 power amp.Domestic USA sales only. Buyer pays shipping. Shipped insured, signature required to protect both Seller and Buyer and insure safe delivery.

Verkauft wird ein IOTAVX SA3 Stereo Vollverstärker.Diesen habe ich ende 2022 bei Grobi.tv gekauft und in kombination mit Regallautsprechern benutzt. Optisch hat der Verstärker wenig bis keine Gebrauchsspuren, die Folie auf dem Logo und Display ist auch noch drauf. Die Rechnung von Grobi.tv ist vorhanden und wird mitgeschickt Der Haushalt ist Tier- und Rauchfrei. Technische Daten (Von Grobi.tv entnommern)Produkttyp: Stereo Vollverstärker Dauerleistung (lastabhängig): 45W (8?, 2 Kanäle), 100W (8?, 1 Kanal gebrückt), 90W (4?, 2 Kanäle), 180W (4?, 1 Kanal gebrückt) Audio Eingänge: 5x Cinch (Eingangsempfindlichkeit 200mV), 1x S/PDIF coaxial, 1x Toslink optisch, 1x Bluetooth (IOTAVX Bluetooth Adapter notwendig), 1x Phono (MM) (Eingangsempfindlichkeit 2,5mV) Audio Ausgänge: Lautsprecheranschluss, 1x Sub Out, 1x Pre Out, 1x Kopfhörerausgang Weitere Ein- und Ausgänge: 1x RS-232 Eingang, 2x Trigger Ausgang, 1x Dimmer Control (10 Stufen) Klirrfaktor (THD+N): =0.005% (80% Leistung, 1 kHz) Signal-Rauschabstand: >105dB (32W, A-Gewichtung) Frequenzgang (+/-3dB): 10Hz - 100kHz Spannungsversorgung: 115VAC or 230VAC, @ 50/60Hz Standby-Verbrauch: <0,5W Abmessungen (B x H xT): 435x59x240mm Gewicht: 6,5 kg Verschickt wird per DHL mit versicherten Versand bis 500€Versand nur innerhalb Deutschlands Ich schließe jegliche Sachmängelhaftung aus. Dieser Verkauf erfolgt unter Aussschuss jeglicher Gewährleistung

IotaVX PA3 power amplifier for sale *MINT* condition, very lightly used in a second system.Impressive power amplifier that punches above its price class. Purchased new directly from Iotavx. I ran this with a separate Weiliang Audio 6010D Line preamplifier using a variety of speakers: KEF LS50Meta, KEF R3, Falcon Acoustics LS3/5a. Excellent, like new, in mint condition with all the factory packaging, manual and power cable. I take very good care of my equipment.Due to downsizing, I need to consolidate my audio gear so I’m selling this lovely, mint condition Iotavx PA3 power amp.Domestic USA sales only. Buyer pays shipping. Shipped insured, signature required to protect both Seller and Buyer and insure safe delivery.

This unit has been unpacked tested and put back in the box. Check out the reviews https://theaudiophileman.com/pa3-power-amplifier-review-iota/.

Cosmetic Description: Excellent condition with no notable blemishes. What is Included: Integrated amplifier, Remote, Power amplifier, RCA cable pair, Manuals, Power cables, Factory packaging. Other Notes: Integrated MM phono stage.The IOTAVX SA3 is the perfect choice for audiophiles who demand the best in sound quality. With its built-in tone control, the SA3 allows you to customize the sound to your specific taste and listening environment.The IOTAVX PA3 is a powerful stereo power amp that uses Class AB amplification technology. The generously dimensioned toroidal transformer provides the power amp with more than enough power at all times, so even difficult music passages can be reproduced absolutely naturally with maximum dynamics. Power 45- 200 W depending on configuration and speakers. These amps handle 4 ohm LRS + Magnepan speakers with ease.

Iotavx Pa3 Amplifier. Condition is Used. Shipped with USPS Ground Advantage. SpecificationsType:Stereo Power AmplifierPoweroutput (RMS):45W (8?, 2 Channels), 100W (8?, 1 Channel bridged), 90W (4?, 2 Channels), 180W (4?, 1 Channel bridged),Connections:RCA-Inputs,1x Pre Out Distortion (THD+N):=0.005% (80% Power Output, 1 kHz)SNR:>105dB (32W, A-Weighting)Frequency Response (+/-3dB):10Hz - 100kHzPower Supply:115VAC or 230VAC, @ 50/60HzStandby Consumption:<0.5WDimensions (W x H x D):435 x 70 x 240 mm (Height incl. feet)Weight:6,5 kg

PREOWNED - $500 LIST! - FULLY TESTED - COMPLETE AND IN GREAT CONDITIONProduct Type:Integrated Stereo AmplifierContinuous power (load-dependent):50W (8?, 2 channels), 100W (8?, 1 channel bridged),100W (4?, 2 channels), 180W (4?, 1 channel Bridged),Audio inputs:5x RCA (input sensitivity 200mV), 1 x S/PDIF coaxial, 1x Toslink optical, 1 x Bluetooth (IOTAVX Bluetooth adaptor required), 1 x Phono (MM) (input sensitivity 2.5mV)Audio outputs:Speaker connection, 1 x Sub Out, 1 x Pre Out, 1 x headphone outputFurther inputs and outputs:1 x RS-232 input, 2 x trigger output, 1 x dimmer control (10 levels)Total harmonic distortion (THD + N):?0.02% (nominal value: A weighting)Frequency response (+/- 3dB):10Hz - 100kHzPower supply:115VAC or 230VAC, @ 50/60HzStandby consumption:<0.5WDimensions (W x H x D):435 x 59 x 240 mmMass:6.5 kg

This IOTAVX SA3 is in beautiful condition, theres not a scratch on it. Ive owned it for over a year. It was working fine with the PA3 and sounded great with my Snell speakers and vintage Yamaha YP-701 turntable. Then one day the SA 3 just stopped working. It turns on but the display will not come on and it will not connect to the PA3. I have no idea what the problem is so Im selling it AS IS FOR PARTS NO RETURN. Its in the original box with the manual, remote, power, cable and Bluetooth device. I do not ship outside the USA. Please look at the pictures and email any questions before bidding.

Comes swith RCA cable, 2 power cables (EU & UK), trigger cable and manual.Price per unit.

This IOTAVX SA3 is in beautiful condition, theres not a scratch on it. Ive owned it for over a year. It was working fine with the PA3 and sounded great with my Snell speakers and vintage Yamaha YP-701 turntable. Then one day the SA 3 just stopped working. It turns on but the display will not come on and it will not connect to the PA3. I have no idea what the problem is so Im selling it AS IS FOR PARTS NO RETURN. Its in the original box with the manual, remote, power, cable and Bluetooth device. I do not ship outside the USA. Please look at the pictures and email any questions before bidding.

This IOTAVX SA3 is in beautiful condition, theres not a scratch on it. Ive owned it for over a year. It was working fine with the PA3 and sounded great with my Snell speakers and vintage Yamaha YP-701 turntable. Then one day the SA 3 just stopped working. It turns on but the display will not come on and it will not connect to the PA3. I have no idea what the problem is so Im selling it AS IS FOR PARTS NO RETURN. Its in the original box with the manual, remote, power, cable and Bluetooth device. I do not ship outside the USA. Please look at the pictures and email any questions before bidding.