Tested mid ranges work tweeter does not work. All minor scratches and knicks shown in pics.

Up for sale is a pair of unique, high quality Vintage KEF Model 103.2 Reference Series speakers - these are handmade in England, and are quite the speakers for any audiophile. Both speakers were tested and perform very nicely, all drivers tested well. Reference Series Model 103.2 (1980-85) Model 103.2 was the successor to the highly regarded 103, and continued with the same two-way closed-box format, using an 8” bextrene coned bass driver which used the new three mounting-point chassis to allow mechanical decoupling from the cabinet. It was designed using KEF’s ‘total system design’ approach where drive units, filter networks and enclosures are studied and developed together to achieve a targeted response. The result was a loudspeaker which achieved a broad frequency response with optimum efficiency and yet a surprisingly small enclosure of just 19 litres. Consistent with all models in the Reference range, 103.2 included S-Stop protection circuitry, and all production systems benefited from KEF’s Reference methodology which matched the response of every system to within 1dB of the design reference, with each pair matched to within 0.5dB of each other.

Sie kaufen hier zwei Stück KEF Reference Series 101/3 Uni-Q Lautsprecher High End aus England 1992-1994. NT19 Tweeter (SP1352)B160 Bass / Midrange unit (SP1309)215 x 330 x 262mm 7,2 kg p/St. Gebrauchter Artikel im guten Zustand doch einige gebrauchsspuren und/oder leichte Kratzer. Grills sind nicht hübsch mehr und die Lautsprecherbrücken fehlen! Funktionieren einwandfrei. Bitte sehe Originalbilder. Zahlung: Vorkasse per berweisung oder PayPal. Versand: Nach Eingang der Zahlung selbstverstndlich in einer angemessener Verpackung! Mit der Abgabe eines Gebotes erklren Sie sich ausdrcklich damit einverstanden, auf die Ihnen gesetzlich zustehende Garantie und das Rckgaberecht bei Gebrauchtwaren vollstndig zu verzichten. Bieten Sie nur, wenn Sie mit dieser Regelung einverstanden sind. Leider macht das neue EU-Recht diesen Hinweis notwendig, da es eine einjhrige Garantie auf Gebrauchtwaren vorsieht. Da es sich um einen Privatverkauf handelt, gebe ich keinerlei Gewhrleistung / Garantie.

Pair of KEF model 107/2 type SP3119 Speaker Towers. I purchased a house and these were in the home. As you can see in the pictures, one of the towers was mid repair on both speakers . I have not tested either of them. I am selling them as is just as they sit. The exterior portion of the boxes is quite nice with only a couple minor blemishes. It would appear that the speakers were either being replaced, or repaired Otherwise seem complete. I am not a audio person so I apologize for my lack of description. What you see is what you get. I will strongly consider all offers No returns

Up for sale is a pair of unique, high quality Vintage KEF Model 103.2 Reference Series speakers - these are handmade in England, and are quite the speakers for any audiophile. Both speakers were tested and perform very nicely, all drivers tested well. Reference Series Model 103.2 (1980-85) Model 103.2 was the successor to the highly regarded 103, and continued with the same two-way closed-box format, using an 8” bextrene coned bass driver which used the new three mounting-point chassis to allow mechanical decoupling from the cabinet. It was designed using KEF’s ‘total system design’ approach where drive units, filter networks and enclosures are studied and developed together to achieve a targeted response. The result was a loudspeaker which achieved a broad frequency response with optimum efficiency and yet a surprisingly small enclosure of just 19 litres. Consistent with all models in the Reference range, 103.2 included S-Stop protection circuitry, and all production systems benefited from KEF’s Reference methodology which matched the response of every system to within 1dB of the design reference, with each pair matched to within 0.5dB of each other.

Nice set of lightly used KEF Reference Series 101 speakers. Nice overall cosmetic condition. The black terminal on one of the speakers needs attention/replacement (see last pic). Despite this defect, the speaker still works but the connection isn’t as secure as it would normally be. Many owners of these opt to install higher end binding posts anyway. Both cabinets exhibit some minor blems here and there . Cosmetic condition is highly subjective so please carefully review all the pics before bidding.

Up for sale is a pair of unique, high quality Vintage KEF Model 103.2 Reference Series speakers - these are handmade in England, and are quite the speakers for any audiophile. Both speakers were tested and perform very nicely, all drivers tested well. Reference Series Model 103.2 (1980-85) Model 103.2 was the successor to the highly regarded 103, and continued with the same two-way closed-box format, using an 8” bextrene coned bass driver which used the new three mounting-point chassis to allow mechanical decoupling from the cabinet. It was designed using KEF’s ‘total system design’ approach where drive units, filter networks and enclosures are studied and developed together to achieve a targeted response. The result was a loudspeaker which achieved a broad frequency response with optimum efficiency and yet a surprisingly small enclosure of just 19 litres. Consistent with all models in the Reference range, 103.2 included S-Stop protection circuitry, and all production systems benefited from KEF’s Reference methodology which matched the response of every system to within 1dB of the design reference, with each pair matched to within 0.5dB of each other.

Up for sale is a pair of unique, high quality Vintage KEF Model 103.2 Reference Series speakers - these are handmade in England, and are quite the speakers for any audiophile. Both speakers were tested and perform very nicely, all drivers tested well. Reference Series Model 103.2 (1980-85) Model 103.2 was the successor to the highly regarded 103, and continued with the same two-way closed-box format, using an 8” bextrene coned bass driver which used the new three mounting-point chassis to allow mechanical decoupling from the cabinet. It was designed using KEF’s ‘total system design’ approach where drive units, filter networks and enclosures are studied and developed together to achieve a targeted response. The result was a loudspeaker which achieved a broad frequency response with optimum efficiency and yet a surprisingly small enclosure of just 19 litres. Consistent with all models in the Reference range, 103.2 included S-Stop protection circuitry, and all production systems benefited from KEF’s Reference methodology which matched the response of every system to within 1dB of the design reference, with each pair matched to within 0.5dB of each other.

Up for sale is a pair of unique, high quality Vintage KEF Model 103.2 Reference Series speakers - these are handmade in England, and are quite the speakers for any audiophile. Both speakers were tested and perform very nicely, all drivers tested well. Reference Series Model 103.2 (1980-85) Model 103.2 was the successor to the highly regarded 103, and continued with the same two-way closed-box format, using an 8” bextrene coned bass driver which used the new three mounting-point chassis to allow mechanical decoupling from the cabinet. It was designed using KEF’s ‘total system design’ approach where drive units, filter networks and enclosures are studied and developed together to achieve a targeted response. The result was a loudspeaker which achieved a broad frequency response with optimum efficiency and yet a surprisingly small enclosure of just 19 litres. Consistent with all models in the Reference range, 103.2 included S-Stop protection circuitry, and all production systems benefited from KEF’s Reference methodology which matched the response of every system to within 1dB of the design reference, with each pair matched to within 0.5dB of each other.

Up for sale is a pair of unique, high quality Vintage KEF Model 103.2 Reference Series speakers - these are handmade in England, and are quite the speakers for any audiophile. Both speakers were tested and perform very nicely, all drivers tested well. Reference Series Model 103.2 (1980-85) Model 103.2 was the successor to the highly regarded 103, and continued with the same two-way closed-box format, using an 8” bextrene coned bass driver which used the new three mounting-point chassis to allow mechanical decoupling from the cabinet. It was designed using KEF’s ‘total system design’ approach where drive units, filter networks and enclosures are studied and developed together to achieve a targeted response. The result was a loudspeaker which achieved a broad frequency response with optimum efficiency and yet a surprisingly small enclosure of just 19 litres. Consistent with all models in the Reference range, 103.2 included S-Stop protection circuitry, and all production systems benefited from KEF’s Reference methodology which matched the response of every system to within 1dB of the design reference, with each pair matched to within 0.5dB of each other.

Up for sale is a pair of unique, high quality Vintage KEF Model 103.2 Reference Series speakers - these are handmade in England, and are quite the speakers for any audiophile. Both speakers were tested and perform very nicely, all drivers tested well. Reference Series Model 103.2 (1980-85) Model 103.2 was the successor to the highly regarded 103, and continued with the same two-way closed-box format, using an 8” bextrene coned bass driver which used the new three mounting-point chassis to allow mechanical decoupling from the cabinet. It was designed using KEF’s ‘total system design’ approach where drive units, filter networks and enclosures are studied and developed together to achieve a targeted response. The result was a loudspeaker which achieved a broad frequency response with optimum efficiency and yet a surprisingly small enclosure of just 19 litres. Consistent with all models in the Reference range, 103.2 included S-Stop protection circuitry, and all production systems benefited from KEF’s Reference methodology which matched the response of every system to within 1dB of the design reference, with each pair matched to within 0.5dB of each other.

Tested and working. Pulled from a working speaker.