| kenwood kac-626 (6) | kenwood ka 6011 (6) | kenwood khs 34 (6) | kenwood kw-8077 (6) | kennwood kx-4520 (6) | kenwood ka7300 (6) |
This listing is for a OEM Kenwood MC-42S Up Down Hand MicThis is the MC-42S that was supplied with the TS-850S, TS-930S, TS-940S and TS-440S radios. Perfect for Elecraft K2 & K3 usersGreat for any Kenwood that accepts 8 Pin PlugsElecraft radios will accept Kenwood 8 Pin mics so its a great way to get audio in your K2 or K3 radio.You will receive the EXACT item shown in the picture.Thanks for looking!!! _gsrx_vers_1436 (GS 9.0.5 (1436))
Please Note Used Policy Payment Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Cancellations & Returns Cancellation or returns will be accepted only if the item has an obvious problem that was not mentioned in the listing description. If that, please let us know within 3 days you got the item. Buyer is responsible for shipping costs and any charge incurred shipping products back. International Buyers Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.
Description
This Kenwood DNX570HD GPS navigation system is being sold for parts or repair. The unit size is 2 DIN and it is a part of the consumer electronics category, specifically for vehicle electronics and GPS. The brand is Kenwood and the model number is DNX570HD. The MPN is also DNX570HD. This item is being sold in the Car Audio In-Dash Units category on eBay. Has the red light of death? Will come with wiring harness and GPS antenna and remote. I will include anything i have for this, but if you Want a specific accessory? Please ask by eBay message to confirm I have it!! For parts or not working, this will need a circuit board. This is easily the cheapest one on eBay. Free shipping in the United States. As long as it doesnt cost me any extra where USPS ships....I will pay for shipping.
6pins D/C Power Cord Cable For Kenwood Icom Radio IC-706 TS-570/TS-2000 AlincoDESCRIPTION Detail: *6pin Radio Power Cable is compatible with for Kenwood TS-570 TS-2000, for Icom IC-706, for Alinco DX-70T, etc. *With high performance, easy to use. *Item Condition: Brand New *Color:Black+Red (As Pictures Show) *Cable length:1m/3.3ft(Approx.) *Input voltage:12~14V *Wire type:12AWG wire *Fuse:30Amp fuse Fitment: for Kenwood: TS-50s, TS-60s, TS-140, TS-440, TS-450, TS-570, T 000, etc. for Icom: IC-706 IC-718 IC-746 IC-756, etc. for Alinco: DX-70T DX-70TH DX-77, etc. Package Contents: 1*Radio Power Cable Notes: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.POLICESShippingPaymentWARRANTY We only ship to confirmed ebay Order addresses. Please comfirm that your Order address is in line with your shipping address. Please kindly note that the combined shipping is not provided because the shipping fee is calculated by weight. Also, the each additional item means exactly the the same color and size. It takes about 7-15 working days to Australia; about 10-30 working days to other countries. Transit time may be a little delayed because of the bad weather and customs inspection. If you do not receive your item within 30 working days since payment finished, please contact us immediately for further assistance. Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message. We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions, please feel free to contact us via Ask seller a question . We will reply your email within 24 working hours.
Product Description Detail: *6pin Radio Power Cable is compatible with for Kenwood TS-570 TS-2000, for Icom IC-706, for Alinco DX-70T, etc. *With high performance, easy to use. *Item Condition: Brand New *Color:Black+Red (As Pictures Show) *Cable length:1m/3.3ft(Approx.) *Input voltage:12~14V *Wire type:12AWG wire *Fuse:30Amp fuse Fitment: for Kenwood: TS-50s, TS-60s, TS-140, TS-440, TS-450, TS-570, T 000, etc. for Icom: IC-706 IC-718 IC-746 IC-756, etc. for Alinco: DX-70T DX-70TH DX-77, etc. Package Contents: 1*Radio Power Cable Notes: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.Payment Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message.Delivery details We only ship to confirmed ebay Order addresses. Please comfirm that your Order address is in line with your shipping address. Please kindly note that the combined shipping is not provided because the shipping fee is calculated by weight. Also, the each additional item means exactly the the same color and size. It takes about 7-15 working days to Australia; about 10-30 working days to other countries. Transit time may be a little delayed because of the bad weather and customs inspection. If you do not receive your item within 30 working days since payment finished, please contact us immediately for further assistance. Contact us We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions, please feel free to contact us via Ask seller a question . We will reply your email within 24 working hours.
KENWOOD TM-2570A TRANSCEIVER 2 METER 144 MHZ HAM RADIO for parts or repair offering as is. The display does power on and shows frequencies. as seen in photos. It did not receive. I was unable to test transmit. minor scratches on the body. no microphone. no mounting brackets. No manual. as is for parts or repair.
Kenwood TS-570D Transceiver. Perfect working condition come with microphone transmit all bands
Kenwood CD Player DP-M5570 W/Cartridge Manual & Cables - Parts or Repair - The left channel is intermittent. If I wiggle the cable, it cuts in & out, so it appears the RCA type connector needs to be re-soldered to the PCB internally. First, thank you for visiting my auction. Next, please feel free, dont be shy, make an offer! This is being sold as is with no returns since its listed for parts or repair. I try very hard to price things fairly, based on several factors.Im not always the lowest price, there are several reasons why. Normally Iperform hours of checking, servicing, replacing parts etc.. I want to be as sure as I can be, the unit is in tip-top shape when I ship it to you, my end customer, and hopefully new-found friend. Because of my thoroughness, I offer a 30 day 100% money-back guarantee. I dont sell marginal units, any unit that I offer, that doesnt meet my standards is sold for parts or scrapped If you have any issues, please contact me. I will make it right, no matter what it takes. Im retired, eBay is the way I supplement my social security. Ive been sevicing electronics since the 1960s, when I was discharged from the the Air Force. Thanks again, I look forward to hearing from you.
Kenwood TS-570D G transceiver. Estate item. Tested, and receives and transmits properly.Has two small scratches on top of cabinet and very light smudge on top of trim ring (as seen in photo), but otherwise in very nice condition. Comes with MC-43S mike, power cord and manual. Will be shipped in original box and insured. Shipping $60.00(Note: Failed to mention in earlier listing, this is a 570D G model.)
Kenwood TS-570D transceiver. Estate item. Tested, and receives and transmits properly.Has two small scratches on top of cabinet and very light smudge on top of trim ring (as seen in photo), but otherwise in very nice condition. Comes with MC-43S mike, power cord and manual. Will be shipped in original box and insured. Shipping $60.00
Product Description Details: * brand new and high quality *Compatible with Icom OPC-025D, Kenwood PG-2Z *Compatible transceiver use 6 pin power plug *Compatible model: For Kenwood: TS-50s TS-60s TS-140 TS-440, TS-450, TS-570, T 000 etc. For Icom: IC-706 IC-718 IC-746 IC-756 etc. For Alinco: DX-70T DX-70TH DX-77 etc. *16AWG wire, 30Amp fuse *Cable length: 1m (Approx.) Package Contents: 1*Power Cord Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. Payment Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message.Delivery details We only ship to confirmed ebay Order addresses. Please comfirm that your Order address is in line with your shipping address. Please kindly note that the combined shipping is not provided because the shipping fee is calculated by weight. Also, the each additional item means exactly the the same color and size. It takes about 7-15 working days to Australia; about 10-30 working days to other countries. Transit time may be a little delayed because of the bad weather and customs inspection. If you do not receive your item within 30 working days since payment finished, please contact us immediately for further assistance. Contact us We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions, please feel free to contact us via Ask seller a question . We will reply your email within 24 working hours.
Kenwood TS-570D(G) HF Ham Radio Transceiver. Offered for sale is a used Kenwood TS-570D(G) ham radio transceiver for use on the ham radio HF bands (160 - 10 meters). The G version of the TS-570 is upgraded from earlier TS-570 transceivers. The radio supports CW, SSB, FM, AM, and several digital modes. Other features include an internal antenna tuner, two antenna ports, DSP, and noise reduction. The unit is designed to transmit at 5 - 100 watts on SSB, CW, FSK, and FM and at 5 - 25 watts on AM. I have not owned this radio. I am selling it as part of the estate of a friend of mine who was a ham radio operator. I tested the transceiver to confirm that it receives and transmits audio signals. I was not able to test all aspects and functions of this radio so I am not able to guarantee that all things work as they should. That said, I believe it is a good operating radio otherwise I would not offer it for sale. The small holes on each side of the radio (visible from the pictures) are screw holes designed into the transceiver presumably for use in mounting the unit to an optional mobile mounting bracket (bracket is not included). The transceiver comes with a hand-held microphone, a three foot fused DC power cord with Anderson power connectors for connection to a DC power source (power source not included), and an owner’s manual. There are a few minor scratches and marks but nothing that is unordinary wear for used equipment. The unit and accessories look nice and appear to have been well cared for. The transceiver box is approximately 11.5” X 10.5” x 4” (Length, Width, Height). Accounting for knobs, connectors, and tilt stand, a space of approximately 15.5” X 11” X 5.25” is needed to accommodate the radio. While an instruction manual is included, prior to bidding bidders are encouraged to review the manual available at http://www.radiomanual.info/schemi/KENW_HF/TS-570DG_SG_user.pdf to become familiar with the features and operation of the transceiver. Additional information can be found at https://www.kenwood.com/i/products/info/amateur/ts570dg570sg.html. Also, see eham.net for reviews of the TS-570D(G) https://www.eham.net/reviews/view-product?id=237. I am not able to offer guarantees on the unit or accessories nor to provide free returns. If you are the successful bidder, and if there are any problems, please contact me within one week of receipt before leaving feedback. The unit will be carefully packed and shipped from a United States address using USPS. The package weighs nearly 18 pounds, so shipping outside the United States could be a bit expensive. All bidders please check shipping costs before placing a bid. Duties, taxes, and fees required by national, state, provincial and/or local governments are not included in the price of the unit and are the buyer’s responsibility. Thanks for your consideration. Good luck with the bidding.
KENWOOD TM-2570A TRANSCEIVER 2 METER 144 MHZ HAM RADIO for parts or repair offering as is. The display does power on and shows frequencies. as seen in photos. It did not receive. I was unable to test transmit. minor scratches on the body. no microphone. no mounting brackets. No manual. as is for parts or repair.
Product Description Detail: *6pin Radio Power Cable is compatible with for Kenwood TS-570 TS-2000, for Icom IC-706, for Alinco DX-70T, etc. *With high performance, easy to use. *Item Condition: Brand New *Color:Black+Red (As Pictures Show) *Cable length:1m/3.3ft(Approx.) *Input voltage:12~14V *Wire type:12AWG wire *Fuse:30Amp fuse Fitment: for Kenwood: TS-50s, TS-60s, TS-140, TS-440, TS-450, TS-570, T 000, etc. for Icom: IC-706 IC-718 IC-746 IC-756, etc. for Alinco: DX-70T DX-70TH DX-77, etc. Package Contents: 1*Radio Power Cable Notes: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.Payment Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message.Delivery details We only ship to confirmed ebay Order addresses. Please comfirm that your Order address is in line with your shipping address. Please kindly note that the combined shipping is not provided because the shipping fee is calculated by weight. Also, the each additional item means exactly the the same color and size. It takes about 7-15 working days to Australia; about 10-30 working days to other countries. Transit time may be a little delayed because of the bad weather and customs inspection. If you do not receive your item within 30 working days since payment finished, please contact us immediately for further assistance. Contact us We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions, please feel free to contact us via Ask seller a question . We will reply your email within 24 working hours.
Excellent condition in perfect working order. Came from an SKs estate.Kenwood TS-570SG HF+6m Transceiver .IncludesTS-570SGOriginal double box and packing materialAftermarket power cable.No Microphone or Manual is included.Kenwood has brought the best of HF DSP technology out of the clouds and into the hands of everyone with the new TS-570D(G) and TS-570S(G) (HF+6m). The G series represents the latest advancements in HF radio design from KENWOOD, and is even available as an upgrade to pre-existing TS-570 units.Features at a glance: 16-bit AF-stage DSP delivers superb audio quality on both transmit and receive Adjustable transmit sound quality and NR1 Noise Reduction System Digital filtering with 3 new CW DSP filters give you the edge when conditions are tough Compact enough for mobiling, yet large enough to build a station around Computer control with free RCP-2 softwareTS-570D/S(G)/TS-570S(G) in detail:Affordable DSP without compromise! High-end radio technology doesnt mean a high-end budget anymore -- KENWOOD delivers it today with the all-new TS-570D/S(G) and TS-570S(G) (HF+6m). With 16-bit DSP technology, untouchable digital filtering, heavy-duty transmitter design, a Central Frequency Control System for near-perfect stability, and a large LCD display section coupled with an ergonomically-optimized human interface, the TS-570D/S(G) provides a clean and powerful operating experience. All of this wrapped up in a compact and efficient package makes the TS-570D/S(G) the perfect choice for home or mobiling in your car, RV or boat.Interference reductionAF-stage digital signal processing provides extensive control over received signals by identifying and filtering interference using digital algorithms. This results in interference reduction capabilities simply not attainable with analog designs. In addition, the new NR1 system is operator-adjustable in 9-step increments, or it can be assigned to track input signal strength automatically. Both the NR1 and NR2 settings now track when changing mode groups (eg. SSB/AM/FM to CW/FSK). The new Dual Selectable Beat Cancel (BC) function also works against intermittent beat interference (except in CW mode).In SSB/AM/FM modes you can select a Hi/Low cut DSP slope tune using up to 441 possible combinations. In CW and FSK, the DSP acts as a VBT (Variable Band Tuning) that alters passband width, for rejection of nearby signals. The super-narrow CW filter (50 Hz) enables effective filtering even during very crowded conditions, with its centre frequency tied to the pitch frequency so they track together. The G model also incorporates 3 new CW DSP filters: 80 Hz, 150 Hz, 500 Hz, for a total of 11 user-selectable filters. You can now also use the One-touch DSP filter wide mode to instantly check band conditions when operating in narrow mode.When used in conjunction with the equalizer, the CW filter reduces ringing to almost undetectable levels. There are also 3 optional filters that can be easily installed (one at a time) to acquire various IF filter bandwidth selections (see optional accessories). The DSP also provides 2 types of noise reduction -- the Line Enhancer Method (NR1) for SSB/AM and the SPAC (Speech Processing by Auto Correlation) Method (NR2) for CW. The Line Enhancer Method automatically forms a filter shape around the target signal for a custom, dynamic noise reduction capability. In conditions where weak CW signals are buried deep in the noise, the SPAC Method has the ability to pull them out with either the 20 milli-second or 7.5 milli-second correlation time settings. In addition, the DSP Beat Cancel function suppresses multiple beats on SSB, FM and AM immediately upon detection, great for 40-meter broadcast station carriers.TX audio shapingYou have 3 ways of tailoring your transmit audio with DSP: Voice Equalizer, Transmit Equalizer and Speech Processor functions, plus you can use the new 9-step TX sound quality monitor volume for precision control. On SSB and AM you can choose between 2 types of Voice Equalizer transmit frequency response settings according to your microphone and operating requirements. The Transmit Equalizer offers 4 frequency response settings on SSB, FM and AM: high boost for improved clarity, bass boost for stronger sound, formant pass to minimize extraneous sounds, and conventional mode for an analog sound. The Speech Processor works across three bands (SSB, FM and AM) for high compression and minimal distortion. By combining the Speech Processor gain settings with the Transmit Equalizer, you are able to shape your voice for virtually any application, plus it is now available for RX as well, complete with its own independent settings.CW auto tune -- a world firstNow you no longer have to adjust the VFO while operating on CW -- the CW Auto Tune function does it for you automatically by adjusting the VFO to your preset pitch at the touch of a button. In the new G models the CW auto tune mode links only with the RIT frequency without changing the transmit frequency so incoming traffic can be tracked even if it is slightly off frequency.Operator-engineered featuresThe TS-570D/S(G) represents the latest advancements in the human-machine interface as applied to radio transceiver design. KENWOOD engineers have achieved a fine balance between size, features, display, controls and performance to deliver a transceiver that will give you outstanding results regardless of your operating style or location.New menu and user featuresThere are 46 types of menu features to assist both the novice and expert operator. The On-line Guide feature provides information on a scrolling sub-display so you wont need to refer to the manual, the click encoder and entry keys provide a positive tactile feedback, frequencies can be directly entered on the 10-key pad, and radio controls can be customized by assigning specific menus, features, or panel switches to the Programmable Function (PF) key. And of course, KENWOODs Fine mode allows 1 Hz steps on the VFO dial for precise manual tuning.Extensive memory functionsYou have a bank of 100 memories available, with 90 assignable for standard memories and 10 for programmable VFO, programmable scan and long-term memory functions. The scroll function lets you browse memory contents, memory channel copy sends the contents of one channel to another, lock-out memory changes the scan map to exclude certain channels, and memory shift alters the frequency stored in a channel. In addition, there are 5 quick memories to capture a current operation on-the-fly, available in SSB, CW, FM, AM and FSK modes -- ideal for contest operation.ScanningThe TS-570D/S(G) has a wealth of scanning capabilities including variable speed with time-based or carrier-based resume modes, channel scan, group channel scan, all except locked out channels, or it can be programmed to scan a frequency range between two channels. The scan-hold function stops the scanning for 5 seconds.Large LCDThe amber-colored backlight LCD frequency display is large, with a 4-stage dimmer, and is laid out in a clear and informative manner. The 7-digit alphanumeric sub-display provides menu mode guidance, split frequency display and digital filter selection options. The accompanying analog meter provides S-readings, PWR, COMP, SWR and ALC information.Optimal sizingThe 270 x 96 mm (10-5/8 x 3-3/4 inch) panel size make the TS-570D/S(G) suitable for any mobile operation, yet its large display and sophisticated user features make it a perfect candidate to build a first-class base station with. This versatility means that you only need one radio for all your home and field operations.High-performance transmitter sectionThe heavy-duty transmitter makes the TS-570D/S(G) ideal for contesting, mobiling and FSK applications, delivering between 5 and 100 watts in 5 watt increments. The large heatsink and high-capacity cooling fan system designed specifically for this model enables continuous operation under a wide range of environmental conditions.High frequency stability is achieved with a one-point frequency control system that uses a single crystal to control all internal oscillating frequencies (except in FM mode). Stability can even be raised to a pro-grade +/- 0.5 PPM (within 7 Hz on the 14 MHz band) with the optional SO-2 TCXO.Hot receiver sectionThe wide-band receiver covers from 500 kHz through 30 MHz continuously with high selectivity and sensitivity. The two built-in pre-amps (one each for high band and low band) allow you to select better sensitivity or higher IMD performance, and the dedicated 7 MHz and 14 MHz bandpass filters deliver improved SW intermodulation rejection.During split-frequency operations you can receive your transmit frequency with a touch of the TF-Set button. The transmit frequency can be changed, even if the receive frequency is locked, as long as the button is held.Other receiver section features include IF Shift, Noise Blanker to eliminate pulse type noise, AGC, All-Mode Squelch and RF Gain.CW featuresIn addition to the CW Auto Tune function, the TS-570D/S(G) has a host of CW features often found only on larger-class models. The full/semi break-in switching and delay time settings are fully adjustable. In semi break-in the delay time between key release and active receive mode can be set for between 50 milli-seconds and 1000 milli-seconds. When using VOX operation the delay time can be set for between 150 milli-seconds and 3000 milli-seconds. Other features include CW side tone monitor and volume setting, CW reverse mode and a 3 channel CW message memory.Built-in keyerThe full-featured electronic keyer provides solid and reliable keying at any speed with dual key inputs on the back -- one for a paddle and one for a key. You can choose between the new Manual Weight feature where the relative length of dots and dashes can be altered in 16 steps between 1:2.5 and 1:4.0, or two types of Auto-Weight -- one that adjusts to the keying speed automatically and one that works on a fixed weight percentage. The Weight Reverse function lessens the weight as the keying speed increases, allowing for easier switching between keying hands. And during CW message playback, the paddle input can be prioritized with the Insert Keying Settings function.Packet & FSKThe packet filter bandwidth and AF input/output levels are fully selectable. You can adjust the ACC2 (PKD) input/output and ANO output levels. FSK features include selectable shift frequencies between 170, 200, 425 and 850 Hz. The KEY polarity and Hi/Low tones are switchable to match your RTTY device (TU, MCP). The FSK reverse function lets you match transmission methods to the other party if necessary, for example changing the BFO frequency from LSB (normal) to USB (reverse).FM features (built-in)The TS-570D/S(G) has built-in CTCSS functionality with 38 sub-tones settings plus a 1750 Hz tone and switchable Narrow/Wide deviation modes. The sub-tone can be set for burst or continuous, depending on the input requirements of the target repeater system, and can be assigned to any of the first 90 memory channels. FM is not necessarily included in all models.Other Features: Automatic antenna tunerThe built-in Automatic Antenna Tuner is preset for immediate matching at 18 points between the 1.8 and 28 MHz Amateur bands. And dual antenna connectors on the TS-570D/S(G) are an added convenience. (The TS-570S(G) has one connector each for HF and 6m.) VS-3The VS-3 option provides a synthesized voice output to aid visually-impaired operators or as an added measure of convenience and safety for mobile operators. PC control optionYou can integrate your TS-570 Series with a PC via a 9-pin D-SUB and RS-232C interface. The RCP-2 Radio Control Program also allows the HF operator to set-up and program multiple radios, and save the configuration data to disk. DRU-3AThe DRU-3A Digital Recording Unit is an available option that enhances contesting or general operation. Data transferMemory settings can be transferred between radios using the copy mode. VOX circuitIn SSB, FM and AM modes the transmitter can be activated by voice, with a fully selectable delay time and gain. Linear amplifier controlAn external Linear Amplifier can be controlled via the menu and the remote jack control relay.
Item DescriptionGood Condition. Operation has been checked.ShippingDomestic Shipping(United States)Standard shippingFreeShippingInternational ShippingStandard International Flat Rate ShippingShipping Cost : $0.00Asia, ChinaExpedited International Flat Rate ShippingShipping Cost : $10.00Asia, ChinaStandard International Flat Rate ShippingShipping Cost : $0.00Europe, United Kingdom, Germany, FranceExpedited International Flat Rate ShippingShipping Cost : $10.00Europe, United Kingdom, Germany, FrancePayment eBay Managed PaymentOther Term International Buyers Please Note: Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -?do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as gifts - US and International government regulations prohibit such behavior.
(96) : 160.93 €(247) : 129.04 €
Livesuche