Here we have a Serviced Realistic LAB-1600 Linear Tracking Automatic Turntable. ( All Belts Replaced ) This unit is fully working and tested. The only problem it has, and I have taken it apartnumerous times to try and fix it, is the draw gets stuck half way when going out. It requires a gentle tug and it will continue. On the way back in , no problem. Just when opening. I have lithium greased the transport but this made no difference. I have taken this apart so many times now, I cannot fathom what is catching on the way out and not on the way back in. Anyways.... Other servicing done to the unit is as follows. -Lithium greasing of the transport system. -Belts replaced on the turntable, Draw mechanism and the drive belt for the tone arm. -Re-capping of the main power board. Please note, make sure, if you purchase this, to connect the EARTH wire to your amplifier on the earthing point, or you will hear a buzzing over your record. The only problem this unit has , is the draw getting stuck on the way out... it only requires a gentle pull and it is not worth keep on opening it up to try to fix something that is not worth doing. As well as running the risk of breaking it. So if I was you, I would just use it as it is. It plays well, automatically finds the record and tracks well. Pictured (last 2) are some scuffs on top of unit Please see pictures for cosmetic condition As someone may get tempted to open it, and I would advise against it , as it is a pain in the rear end to get it to go back together without breaking something, there is NO RETURNS on this unit. You will receive the unit as stated in working condition, just with the sticky draw problem ... (Again only does it on the way out, not on the way back.) For shipping.... The PLATTER will be REMOVED and these packed separately. .. So make sure, before you buy, you know how to put the platter on and to reconnect the belt. It is easy to do. Thank you for looking

Saint Catherines Hospice Scarborough Sound Lab DLP 1600 Professional Belt Drive TurntablePowers on and rotates fine at 33 and 45. Has not been tested for play.Requires a new stylusHas been Electrically Safety (PAT) TestedThe plastic case has some stickers/marks and is heavily scratchedSee photos for full content & condition Please feel free to ask any questions, we operate Monday to Friday, 9am - 4pmPlease refer to pictures for more details, the photos are from the actual itemWe will always combine postage where possible Please note that items sent to the Channel Islands, Isle of Man, Isle of Wight, Northern Ireland, Scilly Isles & Scottish Highlands will be sent via Royal Mail/Parcelforce onlyPlease select this as your postage option at checkout or wait for an invoice before payment Local collection available on all itemsBy shopping with Saint Catherines you are helping to raise the £5 million we need each year to care for patients free of charge both in the hospice and at home. Your support makes a real difference. Thank you.

Tested and seems to be working but unfortunately missing cartridge and has a couple of other issues- - clip that holds tone arm in place when it’s not in use is broken - cue lever is broken Missing one clip from lid Has been sat for a while so has gathered some dust but in good used condition- see photos

Sound Lab DLP1600 DJ Turntable Record Player Spares or repair For spares or repairIn used condition as pictured Payment is due within 24 hours of auction close. An unpaid item report will be filed if payment is not received by the 3rd day. Shipping Terms1.1 Free delivery for anywhere in the United Kingdom. 1.2 Our aim is to prepare and dispatch next working day. Items ordered on Friday after 1pm and on Saturday and Sunday will be processed and dispatched on Monday.1.3 Orders dispatched are tracked and signed.1.4 We will use all reasonable endeavours to ensure these times are met, but cannot be held responsible for dispatched parcels delayed by third parties, for example due to poor weather conditions.1.5 If you do not receive your order within 7 working days from the date of dispatch, please contact us through the Ebay messaging service. Return Terms1.1 We will accept a change of mind return provided it is within the first 14 days starting from the day of purchase. The customer is eligible for a full refund during this period. You are responsible to return the item with the original packaging and the same condition as you have received the item. Damage during transit or before you return the item will negate the return period. You will not be eligible for a refund/exchange after the first 14 days of purchase. 1.2 Please ensure that a copy of your invoice is returned back to us with your item. Customers failing to return their item with the invoice are responsible if their returned parcel can not be identified.1.3 items listed as untested fall into spares or repair category and Therefore can NOT be returned Copyrights (c) 2022 by Thingmebobs. All rights reserved.

Soundlab DLP 1600 turntable. Nice overall condition, odd marks and bumps showing age. Item has been thoroughly cleaned and serviced. Now working as it should. Speed selector and pitch adjust repaired and calibtrated, 33 and 45 now on 0 / centre of each pitch control. New drive belt fitted. Quality budget connector cable with earth / ground fitted and replacement quality budget MM cartridge fitted and tone arm balanced etc. Perspex lid marked but not broken / split.

Pages About Us Items for Sale View Feedback Visit our eBay Store! About Us Items for Sale View Feedback Have a Question? Get in touch today! Contact Us Lab.Gruppen C Series C 16:4 4 Channel 1600W Mid-Power Amplifier Check Out Our Feedback Quality Guarantee Fast Shipping Helpful Staff! Power on tested. Removed from a business environment. Overall in good cosmetic condition with slight scratches to the casing. 90 day warranty. Information on payments, shipping and warranties can be found on the tabs in our listing. If you have any questions about this, or any of our other listings, please do not hesitate to contact us. Have a Question? Get in touch! Follow EOL! View Shop Computers & Networking Business & Office Sound and Vision PCs & Workstations Monitors Tablets View Our Range Of Laptops Explore View Our Range Of Monitors Explore About Us EOL Online is the eCommerce arm of EOL IT Services Ltd, the UKs most highly accredited Information Technology Asset Disposal organisation. We stock new, refurbished and used IT equipment for use at work, at home or on the move. From smartphones and tablets, through PCs and laptops, all the way up to networking and data centre equipment, we can supply your requirements. Payments & Shipping We request that payment is received within 4 days. Please note your order may be cancelled if we dont hear from you Please see the Postage and Payments tab on the listing for specific dispatch and delivery times. All non-UK purchases are handled through the eBay Global Shipping Program. eBay sets any additional fees for the onward shipping of your item to your destination. Warranty & Returns All of our items come with a 90-day return-to-base warranty to give you complete peace of mind. If you would like to return an item, please contact us via eBay messaging. Should you receive an item that is faulty or damaged, we will try either to fix it or replace it. If we are unable to do either, we will refund you in full. Contact Us If you have any questions, about an item for sale or about a purchase you have made, please message us and we will respond within one working day where possible. Our office hours are Monday to Friday 9am-5pm. If you contact us outside of these hours, we will get back to you as soon as we can. About Us EOL Online is the eCommerce arm of EOL IT Services Ltd, the UKs most highly accredited Information Technology Asset Disposal organisation. Designed by Jarilo Design

Here we have a Serviced Realistic LAB-1600 Linear Tracking Automatic Turntable. ( All Belts Replaced ) This unit is fully working and tested. The only problem it has, and I have taken it apart numerous times to try and fix it, is the draw gets stuck half way when going out. It requires a gentle tug and it will continue. On the way back in , no problem. Just when opening. I have lithium greased the transport but this made no difference. I have taken this apart so many times now, I cannot fathom what is catching on the way out and not on the way back in. Anyways.... Other servicing done to the unit is as follows. -Lithium greasing of the transport system.-Belts replaced on the turntable, Draw mechanism and the drive belt for the tone arm.-Re-capping of the main power board. Please note, make sure, if you purchase this, to connect the EARTH wire to your amplifier on the earthing point, or you will hear a buzzing over your record. The only problem this unit has , is the draw getting stuck on the way out... it only requires a gentle pull and it is not worth keep on opening it up to try to fix something that is not worth doing. As well as running the risk of breaking it. So if I was you, I would just use it as it is. It plays well, automatically finds the record and tracks well. Please see pictures for cosmetic condition As someone may get tempted to open it, and I would advise against it , as it is a pain in the rear end to get it to go back together without breaking something, there is NO RETURNS on this unit. You will receive the unit as stated in working condition, just with the sticky draw problem ... (Again only does it on the way out, not on the way back.) For shipping.... The PLATTER will be REMOVED and these packed separately. .. So make sure, before you buy, you know how to put the platter on and to reconnect the belt. It is easy to do. Thank you for looking

Here we have a Serviced Realistic LAB-1600 Linear Tracking Automatic Turntable. ( All Belts Replaced ) This unit is fully working and tested. The only problem it has, and I have taken it apart numerous times to try and fix it, is the draw gets stuck half way when going out. It requires a gentle tug and it will continue. On the way back in , no problem. Just when opening. I have lithium greased the transport but this made no difference. I have taken this apart so many times now, I cannot fathom what is catching on the way out and not on the way back in. Anyways.... Other servicing done to the unit is as follows. -Lithium greasing of the transport system.-Belts replaced on the turntable, Draw mechanism and the drive belt for the tone arm.-Re-capping of the main power board. Please note, make sure, if you purchase this, to connect the EARTH wire to your amplifier on the earthing point, or you will hear a buzzing over your record. The only problem this unit has , is the draw getting stuck on the way out... it only requires a gentle pull and it is not worth keep on opening it up to try to fix something that is not worth doing. As well as running the risk of breaking it. So if I was you, I would just use it as it is. It plays well, automatically finds the record and tracks well. Please see pictures for cosmetic condition As someone may get tempted to open it, and I would advise against it , as it is a pain in the rear end to get it to go back together without breaking something, there is NO RETURNS on this unit. You will receive the unit as stated in working condition, just with the sticky draw problem ... (Again only does it on the way out, not on the way back.) For shipping.... The PLATTER will be REMOVED and these packed separately. .. So make sure, before you buy, you know how to put the platter on and to reconnect the belt. It is easy to do. Thank you for looking

Our eBay Store About Us Contact Us Add to Favorite Sellers --> Jlab Go Charge 1600 Dpi 6 Buttons Mouse Black 27.45 --> JLab Go Charge 1600 DPI 6 Buttons Mouse Black Click Click GoThe GO Charge Wireless Bluetooth Mouse is small, comfortable in your hand, and dare we say—kind of cute? Your everything go-to, it goes with you from desk to caf to coworking space and beyond. We see you digital nomads. Three saved device connections means you can seamlessly switch connections as easily as you switch filters. Product Details Color Height Length UPC -->

Here we have a Serviced Realistic LAB-1600 Linear Tracking Automatic Turntable. ( All Belts Replaced ) This unit is fully working and tested. The only problem it has, and I have taken it apart numerous times to try and fix it, is the draw gets stuck half way when going out. It requires a gentle tug and it will continue. On the way back in , no problem. Just when opening. I have lithium greased the transport but this made no difference. I have taken this apart so many times now, I cannot fathom what is catching on the way out and not on the way back in. Anyways.... Other servicing done to the unit is as follows. -Lithium greasing of the transport system.-Belts replaced on the turntable, Draw mechanism and the drive belt for the tone arm.-Re-capping of the main power board. Please note, make sure, if you purchase this, to connect the EARTH wire to your amplifier on the earthing point, or you will hear a buzzing over your record. The only problem this unit has , is the draw getting stuck on the way out... it only requires a gentle pull and it is not worth keep on opening it up to try to fix something that is not worth doing. As well as running the risk of breaking it. So if I was you, I would just use it as it is. It plays well, automatically finds the record and tracks well. Please see pictures for cosmetic condition As someone may get tempted to open it, and I would advise against it , as it is a pain in the rear end to get it to go back together without breaking something, there is NO RETURNS on this unit. You will receive the unit as stated in working condition, just with the sticky draw problem ... (Again only does it on the way out, not on the way back.) For shipping.... The PLATTER will be REMOVED and these packed separately. .. So make sure, before you buy, you know how to put the platter on and to reconnect the belt. It is easy to do. Thank you for looking