This turntable has been my baby for the past several years, though now that I've added an actual, human baby to my life, as much as it pains me, it's time to say This turntable has been my baby for the past several years, though now that I've added an actual, human baby to my life, as much as it pains me, it's time to say goodbye. I truly milked every bit of performance out of this turntable with this package set up. Included is the turntable with original accessories, original manual and box. Also included in this ultimate package are: 1) ProJect Speed Box II (which allows for 33 or 45 rpm playback without changing the belt) - Retails for $200 https://www.audioadvisor.com/prsbs2-blk 2) A fancy upgraded 1 meter long Canare 48S DC power cable to connect the Speed Box to the turntable - Retails for $49: https://ghentaudio.com/products/dc-4s8g?VariantsId=11083,11106,11131 3) A Pro-Ject Acryl It Platter upgrade - Reails for $149: https://www.audioadvisor.com/pracrylit 4) An Ortofon 2M blue stylus upgrade - Retails for $159: https://www.audioadvisor.com/or2mblus 5) A set of MNPC TECH adjustable height, isolation turntable feet - Retails for $129.99 https://www.mnpctech.com/products/adjustable-height-pro-ject-audio-debut-carbon-turntable-isolation-feet-set-of-four All together, if purchased new, the whole package would run you over $1000. There are a couple of signs of use throughout, please see the pictures. The turntable functions excellently and sounds fantastic! There are three very minor flaws: 1) the pegs on the rear that hold the dust cover are held by two screws each, however the left peg on mine came with a single screw only.  This does not affect the function whatsoever.  2) The lift arm for the turntable is loose as a screw came free over the years.  The screw is included (it's in the bag with the anti-skate weight) but I haven't been able to get it back in as I believe I would need to remove the tonearm to access it.  This has a negligible effect on function - instead of stopping in the upright position (e.g. 90 degrees of motion), the lift arm can move a full 180 degrees which means the tone arm can be lowered with the lift arm facing forward or backward instead of just forward. 3) The faceplate with the scale for the counterweight is gone and so I use a digital tonearm balance to dial in the tracking force (which is definitely better than using the inaccurate counterweight faceplate). I will include the digital scale with the turntable.

Pro-ject Speed Box II Used, in good working order. No visible wear (see pics)

This turntable has been my baby for the past several years, though now that Ive added an actual, human baby to my life, as much as it pains me, its time to say goodbye. I truly milked every bit of performance out of this turntable with this package set up. Included is the turntable with all original accessories, original manual and box. Also included in this ultimate package are: 1) Speed Box II (which allows for 33 or 45 rpm playback without changing the belt) - Retails for $200 https://www.audioadvisor.com/prsbs2-blk 2) A fancy upgraded 1 meter long Canare 48S DC power cable to connect the Speed Box to the turntable - Retails for $49: https://ghentaudio.com/products/dc-4s8g?VariantsId=11083,11106,11131 3) A Pro-Ject Acryl It Platter upgrade - Reails for $149: https://www.audioadvisor.com/pracrylit 4) An Ortofon 2M blue stylus upgrade - Retails for $159: https://www.audioadvisor.com/or2mblus 5) A set of MNPC TECH adjustable height, isolation turntable feet - Retails for $129.99 https://www.mnpctech.com/products/adjustable-height-pro-ject-audio-debut-carbon-turntable-isolation-feet-set-of-four All together, if purchased new, the whole package would run you over $1000. There are a couple of signs of use throughout, please see the pictures. The turntable functions excellently and sounds fantastic! There are two very minor flaws: 1) the pegs on the rear that hold the dust cover are held by two screws each, however the left peg on mine came with a single screw only. This does not affect the function whatsoever. 2) The lift arm for the turntable is loose as a screw came free over the years. The screw is included (its in the bag with the anti-skate weight) but I havent been able to get it back in as I believe I would need to remove the tonearm to access it. This has a negligible effect on function - instead of stopping in the upright position (e.g. 90 degrees of motion), the lift arm can move a full 180 degrees which means the tone arm can be lowered with the lift arm facing forward or backward instead of just forward.

Pro-Ject Speed Box DS elektrische Motorsteuerung mit Drehzahlwahl für Plattenspieler. Auch für andere Plattenspieler Modelle mit dem angegebenen maximalen Stromverbrauch nutzbar.(3 Watt) Alle wichtigen Daten sind auf den Fotos zu sehen.Ohne Beschädigungen, wenig Gebrauchsspuren. Die Pro-Ject Speed Box DS elektrische Motorsteuerung mit Drehzahlwahl eignet sich perfekt für HiFi-Enthusiasten, die eine präzise und zuverlässige Motorsteuerung suchen. Mit der Möglichkeit, zwischen verschiedenen Drehzahlen zu wählen, kann die Speed Box DS das Hörerlebnis verbessern und unerwünschte Vibrationen reduzieren.Diese Speed Box DS ist speziell für Pro-Ject Plattenspieler konzipiert. Die silberne Farbe verleiht dem Gerät ein elegantes Aussehen und die Marke Pro-Ject steht für Qualität und Zuverlässigkeit. Ob Sie gerade erst mit HiFi beginnen oder ein erfahrener Audiophiler sind, die Pro-Ject Speed Box DS ist eine großartige Wahl für eine verbesserte Klangqualität. LIEFERUMFANG: - Pro-Ject Speed Box DS - Netzteil - Originalverpackung - Bedienungsanleitung Dies ist eine Privatauktion. Unter Ausschluss jeglicher Gewährleistung und Sachmängelhaftung

PREOWNED - FULLY TESTED - BLUE - INCLUDES 2M RED CARTRIDGE, STYLUS GUARD, DUST COVER, ACRILIC PLATTER, BELT, SPEEDBOX II SPEED CONTROL

Willkommen bei einer Auktion von Projekt-Akustik ZUR VERSTEIGERUNG KOMMT HIERPro-Ject Speed Box DS AUSFÜHRUNGSilber SERIENNUMMER17A043183 ZUSTANDInzahlungnahme, technisch einwandfrei und optisch im gutem Zustand (siehe Fotos) (Differenzbesteuert gemäß §25a UStG. MwSt. nicht ausweisbar) LIEFERUMFANG- Pro-Ject Speed Box DS- Netzteil- Kabel- Adapter- Dokumente- Originalvepackung Auch wenn im serienmäßigem Lieferumfang evtl. mehr Zubehör enthalten sein sollte, erhalten Sie ausschließlich den oben aufgeführten Lieferumfang. VERSANDWir versenden per Spedition oder DHL. Wir versenden nach Deutschland. Der Versand erfolgt innerhalb Deutschlands, in der Regel innerhalb von 1 - 4 Werktagen nach Zahlungseingang zu den angegebenen Versandkosten. ZAHLUNGSie haben die Möglichkeit, den Artikel in bar bei Abholung, per Überweisung oder per PayPal zu bezahlen. Einen Versand per Nachnahme bieten wir nicht! an. Bei Rückfragen oder Vereinbarung für einen Hörtermin erreichen Sie uns von Di. – Fr. von 10.00 – 19.00 Uhr und Sa. von 10.00 – 16.00 Uhr unter 0451-20 33 300. Und nun wünschen wir Ihnen viel Erfolg bei der Auktion! Ihr Projekt Akustik Team Projekt Akustik Schönberg GmbHTremskamp 51 - 51aD-23611 Bad Schwartau Geschäftsführer: Birger Schönberg, Tobias Schönberg und Torge Schönberg Amtsgericht Lübeck HRB 858 BS USt-ID-Nr.: DE 135123958ZSVR-Nummer: DE4122505792345A.Nr.: 193185 _gsrx_vers_1547 (GS 9.4.2 (1547))

Verkaufe hier eine gebrauchte, ca. 2 Jahre alte Speed-Box S2 von Pro Ject. Die Speed Box hat leichte uerliche Gebrauchsspuren und ist technisch in einem einwandfreien Zustand, sie wird lediglich aufgrund eines Systemwechsels abgegeben! Da Privatverkauf KEINE Garantie oder Rcknahme! Die Pro-Ject Speed Box S2 ist eine elektrische Geschwindigkeitskontrolle fr Plattenspieler. Diese gebrauchte Speed Box S2 ist in gutem Zustand und funktioniert einwandfrei. Sie ist speziell fr Plattenspieler konzipiert, deren Geschwindigkeit lediglich manuell via Riemen-Umlegung gedacht ist und ermglicht eine genaue Einstellung der Geschwindigkeit in den Stufen 33 und 45 RPM. Das Modell ist einfach zu bedienen und verfgt ber eine Anzeige, die die eingestellte Geschwindigkeit anzeigt (siehe Bilder). Die Speed Box S2 ist ein unverzichtbares Zubehr fr anspruchsvolle HiFi-Liebhaber, die keine Lust mehr haben die Geschwindigkeit ber den Riemen zu steuern.

Enhance your turntables performance with the Pro-Ject Speed Box S. This black speed box is ideal for those with a Debut Carbon turntable and offers two channels for optimal sound quality. With analog features and manufactured in 2019, this model is sure to impress.

Up for your consideration is this NOS (New Old Stock) Pro-Ject RM-5.1 SE Turntable. This table was never set up and used. I purchased this from a local dealer and just put it away. I have other tables and I never bothered to use this one. This table is in new condition and ready to be finally set up and used. Details about the table12 resonance-optimized medium density fiberboard (MDF) platter with integrated vinyl mat and screw-on record clampprecision bearing system for smooth, quiet platter rotationfixed headshell, carbon fiber tonearm with precision Swiss bearings for superior rigidity and low resonanceincludes pre-mounted Sumiko Blue Point No. 2 high-output moving coil cartridgetonearm offers easy adjustment of vertical tracking angle and azimuth for optimized playback performance and cartridge flexibilitymedium density fiberboard (MDF) base with adjustable damped aluminum cone feethigh-performance AC motor decoupled from base for reduced vibration transmission and better soundmanual operation with silicone-damped tonearm lift33-1/3 and 45 rpm speedsspeed variance: ±0.5%wow and flutter: ±0.08%signal-to-noise ratio: 70dBdetachable RCA audio connectionsexternal power supply reduces likelihood of electro-mechanical interferencecompatible with Pro-Ject Speed Box S electronic speed regulator for enhanced sound and speed-changing convenienceweight: 14.4 lbs.15-13/16W x 5-9/16H x 11-7/8D The table also comes with the Speed Box S About this item High-precision quartz-regulated electronic speed control governed by smart microprocessor Provides clean power decoupled from mains interference Allows for automatic speed change between 33 & 45 RPM (78 RPM possible with optional accessory pulley) Suitable for all Turntables with 16 VAC) Motors and up to 3 watt max. Power consumption Metal case shields electronics from vibration and electromagnetic interference Also included are two additional counterweights for different cartridge uses of differing weights. Im packing the Speed Box inside the box of the turntable to save space and shipping. Shipping to the lower 48 USA only. No international. Any questions, please ask.

Pro-Ject Speed Box S2 Motorsteuerung + ULPS Ultra Linear Power Supply Top-Zustand. Das ULPS von Tomanek ist ein absolutes Qualitätsprodukt. Bitte auf der Homepage anschauen: Tomanek ULPS KD502 - ULPS (Ultra Linear Power Supply) Transistor-Netzteil Die SpeedBox kommt in OVP.

USED. VERY GOOD tested and working, with power supply to wall and power cord from TT to speed box Speed Box S Electronic motor control and speed change PUT: 18V DC OUTPUT: 16 V AC / 190mA (up to 3W max) SPEED STABILITY: +/- 0,001% POWER SUPPLY: 18V/500mA DC DIMENSIONS: 103 x 36 x 104 mm (WxHxD) WEIGHT: 560 g without power supply COMPATIBLE TURNTABLES (16 VOLT AC) • 33/45 (78 with optional pulley) Works with Pro-Ject Debut III, Debut Carbon (only US version with 16 volt motor), 1-Anniversary, Art-1, 1-Xpression III & Classic, RPM-5.1 • 33/45 (no 78 available, because pulley can not be exchanged): Essential, 2-Xperience Acryl & Classic, 6-perspeX, RPM-1.3, RPM-9.1X RPM-9.2, RPM-10.1,

Pro-Ject Speed-Box S2 schwarz, weniger als 1 Jahr alt, 1. Hand, mit Originalrechnung, kompletter Verpackung und zusätzlich zum originalen sehr kurzen Kabel ein 2 m Gleichstromkabel zur Verbindung von Speedbox mit Plattenspieler. Elektronische Motorateuerung mit Wahl von 33,3 und 45 Umdrehungen pro Minute für Project-Plattenspieler mit 16 V AC-Anschluss. Ich selber habe sie problemlos mit einem Thorens TD 166 Mk VI betrieben und dadurch eine genauere Drehzahl und komfortableres Umschalten zwischen den Geschwindigkeiten erreicht. Jetzt habe ich einen neuen Plattenspieler gekauft, daher keinen Bedarf mehr. Privatverkauf; keine Garantie, keine Gewährleistung, keine Reklamation, kein Umtausch eingestellt

In very good condition. Comes with Speed Box II & Phono Box II USB. Has little use. Comes as pictured.

Wonderful speedbox for Pro-Ject turntables. Allows the speed to be changed without mocign the belt, and reduces noise. Brilliant upgrade for the Pro-Ject turntable. Comes with all cables, various plug adapters and box. Compaitble list below: Pro-Ject Debut III, Debut Carbon (only US version with 16 volt motor), 1-Anniversary, Art-1, 1-Xpression III & Classic, RPM-5.1 • 33/45 (no 78 available, because pulley can not be exchanged):Essential, 2-Xperience Acryl & Classic, 6-perspeX, RPM-1.3,RPM-9.1X RPM-9.2, RPM-10.1

Pro-ject Speed box 11 (16V Ac Output).

Pro-Ject Speed Box S. Ohne Netzteil und Verbindungskabel (können separat nachgekauft werden) Gerät für Bastler

About Us Contact Us Terms delivery returns Home Menu Home HiFi All in One Music Systems Amplifiers Blu-Ray and DVD Players Cartridges Stylus Replacements CD Players DACs Digital Products Equipment Supports Headphone Amplifiers Headphones Hi-Fi Supports iPod & MP3 Docks Media Players Music Streamers Other Phono Stages Portable Music Players Speaker Stands and Supports Speakers Tonearms Tuners Turntables and Essentials Home Cinema Cables Eccose Cable Shop Nordost & Wyrewizard Cables QED Cable Shop Wireworld Cable Shop Burn-In Products Cable Burn-In Service Cardas Custom Adaptors & Cable Chord Company Cables Digital Interconnects Ethernet Cables HDMI Cables Interconnects Mains Cables Mains Products Speaker Cables Sub-Woofer Interconnects Tonearm Cables and Connectors USB Cables Cables and Connectors Music CDs Music CDs & SACDs Vinyl Records Accessories BluRay Calibration Cartridge Mounting Kits Cartridge Tags CD, DVD Cleaning & Care Furutech Shop Headshell Leads Headshells Hi-Fi Fuses Isolation Products Mains Blocks Mains Connectors Maintenance / Cleaning Michell Engineering Shop Naim Shop Power Supplys Pro-Ject Turntable Spare Parts Record Cleaning and Care Record Cleaning Machines Record Sleeves Roksan Accessories Stylus Cleaners Tape Cleaners Terminations & Solder Tonearm Essentials Turntable Belts Turntable Covers Turntable Setup Tools Turntable Upgrades and Kits Valve and Tube Essentials Vinyl LP Display & Storage VPI Shop HiFi All in One Music Systems Amplifiers Blu-Ray and DVD Players Cartridges Stylus Replacements CD Players DACs Digital Products Equipment Supports Headphone Amplifiers Headphones Hi-Fi Supports iPod & MP3 Docks Media Players Music Streamers Other Phono Stages Portable Music Players Speaker Stands and Supports Speakers Tonearms Tuners Turntables and Essentials Home Cinema Cables Eccose Cable Shop Nordost & Wyrewizard Cables QED Cable Shop Wireworld Cable Shop Burn-In Products Cable Burn-In Service Cardas Custom Adaptors & Cable Chord Company Cables Digital Interconnects Ethernet Cables HDMI Cables Interconnects Mains Cables Mains Products Speaker Cables Sub-Woofer Interconnects Tonearm Cables and Connectors USB Cables Cables and Connectors Music CDs Music CDs & SACDs Vinyl Records Accessories BluRay Calibration Cartridge Mounting Kits Cartridge Tags CD, DVD Cleaning & Care Furutech Shop Headshell Leads Headshells Hi-Fi Fuses Isolation Products Mains Blocks Mains Connectors Maintenance / Cleaning Michell Engineering Shop Naim Shop Power Supplys Pro-Ject Turntable Spare Parts Record Cleaning and Care Record Cleaning Machines Record Sleeves Roksan Accessories Stylus Cleaners Tape Cleaners Terminations & Solder Tonearm Essentials Turntable Belts Turntable Covers Turntable Setup Tools Turntable Upgrades and Kits Valve and Tube Essentials Vinyl LP Display & Storage VPI Shop Customer services About us Delivery & returns Privacy Policy Terms & Conditions Latest Products Pro-Ject Speed Box S2 Silver - Open Box Pro-Ject Speed Box S2 Silver - Open Box £90.00 Add to wishlist Watch this item Ask seller a question Description Customer Reviews Delivery Payment Returns Description Pro-Ject Speed Box S2 Silver - Open Box PLEASE NOT THIS IS ONLY SUITABLE FOR TURNTABLES WITH AC 16 VOLT MOTORS. NOT SUITABLE FOR ANY DC MOTORS! Improved power supply for older turntables Automatic switching between 33 and 45RPM Makes some turntables 78RPM compatible S2-Line The Speed Box S2 offers a functional and convenient upgrade for many Pro-Ject turntables with a 16V AC motor that do not already have built-in speed control. The Speed Box S2 acts as an AC generator for the turntable, replacing the fluctuant supply from a normal 16V power supply and regulating it. The result is a clean power signal that allows the motor to perform optimally. The added convenience is that the Speed Box S2 can shift frequency, for easy changing between 33 and 45RPM at the push of a ...