This turntable has been my baby for the past several years, though now that I've added an actual, human baby to my life, as much as it pains me, it's time to say This turntable has been my baby for the past several years, though now that I've added an actual, human baby to my life, as much as it pains me, it's time to say goodbye. I truly milked every bit of performance out of this turntable with this package set up. Included is the turntable with original accessories, original manual and box. Also included in this ultimate package are: 1) ProJect Speed Box II (which allows for 33 or 45 rpm playback without changing the belt) - Retails for $200 https://www.audioadvisor.com/prsbs2-blk 2) A fancy upgraded 1 meter long Canare 48S DC power cable to connect the Speed Box to the turntable - Retails for $49: https://ghentaudio.com/products/dc-4s8g?VariantsId=11083,11106,11131 3) A Pro-Ject Acryl It Platter upgrade - Reails for $149: https://www.audioadvisor.com/pracrylit 4) An Ortofon 2M blue stylus upgrade - Retails for $159: https://www.audioadvisor.com/or2mblus 5) A set of MNPC TECH adjustable height, isolation turntable feet - Retails for $129.99 https://www.mnpctech.com/products/adjustable-height-pro-ject-audio-debut-carbon-turntable-isolation-feet-set-of-four All together, if purchased new, the whole package would run you over $1000. There are a couple of signs of use throughout, please see the pictures. The turntable functions excellently and sounds fantastic! There are three very minor flaws: 1) the pegs on the rear that hold the dust cover are held by two screws each, however the left peg on mine came with a single screw only.  This does not affect the function whatsoever.  2) The lift arm for the turntable is loose as a screw came free over the years.  The screw is included (it's in the bag with the anti-skate weight) but I haven't been able to get it back in as I believe I would need to remove the tonearm to access it.  This has a negligible effect on function - instead of stopping in the upright position (e.g. 90 degrees of motion), the lift arm can move a full 180 degrees which means the tone arm can be lowered with the lift arm facing forward or backward instead of just forward. 3) The faceplate with the scale for the counterweight is gone and so I use a digital tonearm balance to dial in the tracking force (which is definitely better than using the inaccurate counterweight faceplate). I will include the digital scale with the turntable.

Pro-ject Speed Box II Used, in good working order. No visible wear (see pics)

This turntable has been my baby for the past several years, though now that Ive added an actual, human baby to my life, as much as it pains me, its time to say goodbye. I truly milked every bit of performance out of this turntable with this package set up. Included is the turntable with all original accessories, original manual and box. Also included in this ultimate package are: 1) Speed Box II (which allows for 33 or 45 rpm playback without changing the belt) - Retails for $200 https://www.audioadvisor.com/prsbs2-blk 2) A fancy upgraded 1 meter long Canare 48S DC power cable to connect the Speed Box to the turntable - Retails for $49: https://ghentaudio.com/products/dc-4s8g?VariantsId=11083,11106,11131 3) A Pro-Ject Acryl It Platter upgrade - Reails for $149: https://www.audioadvisor.com/pracrylit 4) An Ortofon 2M blue stylus upgrade - Retails for $159: https://www.audioadvisor.com/or2mblus 5) A set of MNPC TECH adjustable height, isolation turntable feet - Retails for $129.99 https://www.mnpctech.com/products/adjustable-height-pro-ject-audio-debut-carbon-turntable-isolation-feet-set-of-four All together, if purchased new, the whole package would run you over $1000. There are a couple of signs of use throughout, please see the pictures. The turntable functions excellently and sounds fantastic! There are two very minor flaws: 1) the pegs on the rear that hold the dust cover are held by two screws each, however the left peg on mine came with a single screw only. This does not affect the function whatsoever. 2) The lift arm for the turntable is loose as a screw came free over the years. The screw is included (its in the bag with the anti-skate weight) but I havent been able to get it back in as I believe I would need to remove the tonearm to access it. This has a negligible effect on function - instead of stopping in the upright position (e.g. 90 degrees of motion), the lift arm can move a full 180 degrees which means the tone arm can be lowered with the lift arm facing forward or backward instead of just forward.

Pro-Ject DEBUT III / Phono SB Plattenspieler Wir verkaufen einen defekten Pro-Ject Plattenspieler - Sondermodell der Wochenzeitschrift Die Zeit - der sich optisch in einem guten Zustand befindet. Siehe Fotos! Zum Defekt: Der Teller dreht sich nicht mehr. Nur der Motor gibt ein leichtes Brummen von sich. Nadel defekt! Das Chassis, der Tonarm, der Subteller, der Plattenteller, der Vorverstärker, etc. sind in Ordnung. Zum Lieferumfang gehören außerdem die Abdeckung, Filzmatte, Netzteil, Anleitung, Gegengewicht, Tonabnehmer ohne Nadelträger. Technische Merkmale: + ntegrierter Phono-Vorverstärker (MM): ja + Ausgangsspannung: 160mV/1kHz bei 4mV/1kHz am Eingang + Verstärkeranschluss: Hochpegeleingang + Geschwindigkeiten: 33 / 45/ 78 U/Min + Elektronische Geschwindigkeitswahl: 33 / 45U/Min + Mechanische Geschwindigkeitswahl: 78 U/Min + Staubschutzhaube: ja + Tonarm: Pro-Ject 8.6 + Effektive Tonarmlänge: 8,6 (218,5mm) + Mitgeliefertes Gegengewicht für Tonabnehmergewicht: 3,5 - 5,5g + Optionales Gegengewicht für Tonabnehmergewicht: 6 - 9g + Auflagekraft: 10 - 30mN + Max. Geschwindigkeitsabweichung: ±0,8% + + Max. Gleichlaufschwankungen: ±0,12% + Max. Rumpeln: -65dB + Plattenteller Gewicht/Durchmesser: 1,3kg/280mm + Leistungsaufnahme: 6,5W + Maße (Staubschutzhaube offen): 370 x 415 x 400mm + Maße (Staubschutzhaube geschlossen): 118 x 415 x 320mm + Gewicht: 6 kg Abholung in Berlin möglich. International bidders are welcome...

In very good condition. Comes with Speed Box II & Phono Box II USB. Has little use. Comes as pictured.

Speed Control The Quartz-controlled oscillator of the Speed Box S/E II generates clean AC-power without mains distortion. Power outputs are galvanically decoupled from the input current. Many turntables in the current market (including all Pro-Ject models) use AC synchronous motors, and the Speed Box SE II can be used for ultimate speed consistency and electronic speed change between 33 and 45rpm with many such devices. Additionally, speed can be altered in graduated steps on either setting, allowing you to fine-tune the finest performance out of your given record. I was using this with my MusicHall 2.2, but I have moved to a U-Turn Audio Orbit and it is not compatible... Two brand new ac adapters and manual This is used with Pro-Ject and MusicHall turntables… Offers accepted See less

Welcome to HDMI and More. Our Store All Items Feedbacks Contact Us Price 4.56 FOLLOW USHAVE A QUESTION? PRODUCT DESCRIPTION Pack of 2 High-Quality 30AWG HDMI Male to Male Cable – 6 feet To make your home theatre look neat and professional, a high-quality HDMI cable is key. HDMI is the only cable that can transfer uncompressed high-definition video in resolutions up to 4k and multi-channel digital audio. These high-speed HDMI cables are convenient because they will allow the transfer of digital audio and video in a single cable, permitting a less confusing mess of wires and a cleaner entertainment center. These universal HDMI cables are compatible with all HDMI devices, as well as being backward compatible with all previous HDMI standards. One HDMI cable can replace as many as eleven older cables, making your entertainment system easier to connect and easier to upgrade. This HDMI cable is the best way to hook up Computer, Digital Media Receiver, DVD, Blu-ray, and video game consoles to TV, Monitor, Projector, etc. You’ll experience clear, vibrant colors because our HDMI cable meets the HDMI standards. Providing you with transfer rates up to 10.2 Gbps. Supports 4K, 1080P Full HD, 3D, Ethernet Channel, 48-Bit Deep Color, Audio Return Channel (ARC), HDCP compliant, and bandwidth speed of up to 18 Gbps to meet the latest HDMI standards. CEC and ARC features allow you to simplify your setup by letting you control your devices from one control point. HDMI cable allows for 8-channels of compressed and uncompressed audio at 1-bit, 16-bit, 20-bit, and 24-bit – at sample rates of 32kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, and 192 kHz. HDMI supports all the common stereo and multichannel audio formats for modern TV, movie, and music content. This 30 Gauge HDMI cable itself is pure quality. 24k Gold-Plated Interface, make your HDMI Cable corrosion-resistant, prevent external interference, provide reliable connections and maintain signal purity. The cable has a flexible extremely tough PVC jacket with molded strain-relief construction, so it will withstand everyday use and even an occasional, accidental tug or twist without blinking. Features: Connector A: HDMI Male Connector B: HDMI Male Supports the following resolutions: 4K, 2k, 1080p, 1080i, 720i, 720p, etc. Compatible with any devices with HDMI Port HDMI cable with Audio Return Channel (ARC) Supports Dolby TrueHD and DTS-HD Master Audio Fully HDCP compliant to provide highest level of signal quality Gold-plated terminals ensure long-lasting, corrosion-free connections PVC Outer Jacket for durability and interference protection Gauge: 30AWG Color: Black Length: 6FT Specifications BRAND HDMI and MORE MODEL Custom Block Heading Custom Block Content. PAYMENT We accept all major credit cards VISA, MasterCard, American Express, Discover, or PayPal. We only ship to Confirmed PayPal Addresses. SHIPPING Free Shipping within the continental United States. Please make sure to put the right shipping address. We do not carry responsibility for any incorrect or undeliverable addresses. RETURNS You are not 100% satisfied with an item you received? Whatever the reason is, you wont be stuck with an item you cannot use or you do not want. You may return your purchase for ANY REASON within 30 days of receipt for an exchange or a refund of the purchase price excluding our shipping. Our products are offered with free shipping, so please be aware that if you return the products our actual outbound shipping costs will still be deducted from your return refund. If a product arrives damaged, or we made a shipping error, we will pay to return the item to us and send a replacement to you. If you decide you do not want a replacement, the item can be returned under our standard return policy. Our Store All Items Feedbacks Contact Us

Pro-Ject Speed Box Mk II silver turntable speed controller for any of their turntables which have the 16 volt AC synchronous motor. This unit allows for electronic speed switching between 33 & 45 RPM and with a pully change also allows 78RPM operation. This unit comes in the original packaging and in perfect working order. I will post it double boxed and securely packed for safe arrival! I am selling the unit only because I have finished with the persnal turntable project (no pun intended) and it, along with an RPM10 motor pod, are surplus to my requirements. The motor unit is also for sale in another auction. This unit will be sent with the standard, UK Pro-ject 16VAC wall wart power supply