Revised Thorens TD125 Turntable With Original TP16 Tracking Arm - Sme OptionalThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.ATTENTION: This offer does not contain an SME tonearm (optional), but the original Thorens TP16 tonearmIndividual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220/230V, 50Hz or 110/120V, 60Hz (for example USA or world wide) Restored Thorens TD125 or 125 MKII in black burgundy red metallicwith original Thorens TP16 tonearm and Ortofon VinylMaster Alpha as a pickup(Artieklfotos show an SME 3009 Series II with Ortofon 2M blue)Various SME tonearms are optionally possible Our turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.Item description:Tonearm: Thorens TP16Pickup:          Ortofon VinylMaster AlphaLimit switch:      NoInner plate: metalPlate bearing:               10mmDevice feet:              height-adjustable spikesBasic dimensions:             Width: 525mm, depth: 413mm, height 97mmThe following work will be carried out:Revision of electronic and mechanical componentsUm- or Components required for installationSetting and balancing the different speedsAdjustment and adjustment of the suspensionChecking and adjusting the tonearm and cartridge Thorough cleaning of the entire record playerExecution of an endurance testHousing:The housing consists of 40mm side panels and a 16mm thick MDF base. The surface was painted with several layers of paint and then sealed with clear varnish. The connection panel for all required cables is located on the back. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. The base is screwed to the frame and can be easily removed.Device feet:There are four height-adjustable ones on the bottom of the case SPIKES Installed from chrome-plated stainless steel. The base is screwed to the frame and can be easily removed.Ortofon VM Alpha cartridge (included):With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next higher needle slot.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:The turntable is made in five complex and time-consuming steps polished to a high shine. The high-gloss polish gives your record player a unique look. With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine. Drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system. --The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood:for placing on the housing: 160,- XXL device feet (pictures 13, 14 and 15): 90,-Height adjustable, made of stainless steel. Total weight 2520g, diameter 65mm, height 26mmSME tonearms (the matching systems are selected according to the tonearms): SME Series III (replaceable tonearm tube, eff. Weight approx. 5g): 499,- SME 3009 improved (fixed headshell, eff. Mass 6.5g): 499,- SME 3009 S2 improved (replaceable headshell, eff. Weight 9.5g): 499,- SME 3009 Series II (replaceable headshell, eff. Weight 12.5g): 799,- Cartridge MM system including installation: AUDIO-TECHNICA VM 740ML (Microlinear): 339,- AUDIO-TECHNICA VM 750 SH (Shibata): 439,- AUDIO-TECHNICA VM 760 SLC (special line): 699,-Ortofon 2M Red (elliptical): 109,-Ortofon 2M Blue (elliptical, naked): 229,-Ortofon 2M Bronze (Fineline): 390,-Ortofon 2M Black (Shibata): 599,-Ortofon 2M Black LVB 250 (Shibata with boron needle carrier): 899,- Cartridge MC System including installation: ORTOFON Quintet Red (elliptical): 330,- ORTOFON Quintet Blue (elliptical, naked): 470,- ORTOFON Quintet Bronze (Fineline): 660,- ORTOFON Quinted Black (Shibata): 940,- ORTOFON Cadenza Red (Fineline): 1299,- AUDIO-TECHNICA AT-OC9XEB (elliptical): 279,-AUDIO-TECHNICA AT-OC9XEN (elliptical, naked): 369,- AUDIO-TECHNICA AT-33EV (elliptical): 499,-AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599,-AUDIO-TECHNICA AT-33SA (Shibata): 799,-With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next higher needle slot. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Farbe schwarz , bordeaux rot metallic Modell TD125 oder TD125 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Original Headshell Thorens for TP16 DefectiveThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Original Thorens headshell Condition: a thread for the mounting screw is defective, the plug connector for the tonearm is not available (see photos) Original Thorens headshell Condition: a thread for the mounting screw is defective, the plug connector for the tonearm is not available (see photos) Herstellernummer nicht zutreffend Marke Thorens Markenkompatibilität Für Thorens Produktart Headshell EAN Nicht zutreffend

Original Thorens TD... Tonarm TP 16 mit Tonarmlift Tonarminnenverkabelung defekt, Zustand siehe Fotos ohne Gegengewicht, ohne Tonarmdeckel ( siehe Fotos9

Original Thorens Td Tone Arm Tp 16 With Lift Tonarminnenverkabelung DefectiveThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Original ... Tonearm TP 16 with tonearm liftTonearm internal wiring defective, see photos for condition  without counterweight, without tonearm cover (see photos9 Original ... Tonearm TP 16 with tonearm lift Tonearm internal wiring defective, see photos for condition   without counterweight, without tonearm cover (see photos9 Herstellernummer nicht zutreffend Marke Thorens Markenkompatibilität Für Thorens Produktart Tonarm EAN Nicht zutreffend

ATTENTION: This offer does not contain an SME tonearm (optional), but the original Thorens TP16 tonearmIndividual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220/230V, 50Hz or 110/120V, 60Hz (for example USA or world wide) Restored Thorens TD125 or 125 MKII in black burgundy red metallicwith original Thorens TP16 tonearm and Ortofon VinylMaster Alpha as a pickup(Artieklfotos show an SME 3009 Series II with Ortofon 2M blue)Various SME tonearms are optionally possible Our turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.Item description:Tonearm: Thorens TP16Pickup:          Ortofon VinylMaster AlphaLimit switch:      NoInner plate: metalPlate bearing:               10mmDevice feet:              height-adjustable spikesBasic dimensions:             Width: 525mm, depth: 413mm, height 97mmThe following work will be carried out:Revision of electronic and mechanical componentsUm- or Components required for installationSetting and balancing the different speedsAdjustment and adjustment of the suspensionChecking and adjusting the tonearm and cartridge Thorough cleaning of the entire record playerExecution of an endurance testHousing:The housing consists of 40mm side panels and a 16mm thick MDF base. The surface was painted with several layers of paint and then sealed with clear varnish. The connection panel for all required cables is located on the back. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. The base is screwed to the frame and can be easily removed.Device feet:There are four height-adjustable ones on the bottom of the case SPIKES Installed from chrome-plated stainless steel. The base is screwed to the frame and can be easily removed.Ortofon VM Alpha cartridge (included):With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next higher needle slot.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:The turntable is made in five complex and time-consuming steps polished to a high shine. The high-gloss polish gives your record player a unique look. With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine. Drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system. --The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood:for placing on the housing: 160,- XXL device feet (pictures 13, 14 and 15): 90,-Height adjustable, made of stainless steel. Total weight 2520g, diameter 65mm, height 26mmSME tonearms (the matching systems are selected according to the tonearms): SME Series III (replaceable tonearm tube, eff. Weight approx. 5g): 499,- SME 3009 improved (fixed headshell, eff. Mass 6.5g): 499,- SME 3009 S2 improved (replaceable headshell, eff. Weight 9.5g): 499,- SME 3009 Series II (replaceable headshell, eff. Weight 12.5g): 799,- Cartridge MM system including installation: AUDIO-TECHNICA VM 740ML (Microlinear): 339,- AUDIO-TECHNICA VM 750 SH (Shibata): 439,- AUDIO-TECHNICA VM 760 SLC (special line): 699,-Ortofon 2M Red (elliptical): 109,-Ortofon 2M Blue (elliptical, naked): 229,-Ortofon 2M Bronze (Fineline): 390,-Ortofon 2M Black (Shibata): 599,-Ortofon 2M Black LVB 250 (Shibata with boron needle carrier): 899,- Cartridge MC System including installation: ORTOFON Quintet Red (elliptical): 330,- ORTOFON Quintet Blue (elliptical, naked): 470,- ORTOFON Quintet Bronze (Fineline): 660,- ORTOFON Quinted Black (Shibata): 940,- ORTOFON Cadenza Red (Fineline): 1299,- AUDIO-TECHNICA AT-OC9XEB (elliptical): 279,-AUDIO-TECHNICA AT-OC9XEN (elliptical, naked): 369,- AUDIO-TECHNICA AT-33EV (elliptical): 499,-AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599,-AUDIO-TECHNICA AT-33SA (Shibata): 799,-With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next higher needle slot. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By

ATTENTION : Cette offre ne contient pas de bras de lecture SME (en option), mais le bras de lecture Thorens TP16 dorigineFabrication individuelle ! Veuillez noter le délai de traitement indiqué sur Ebay ! Fabrication individuelle ! Veuillez noter le délai de traitement indiqué sur Ebay ! Cette platine vinyle est disponible en 220/230V, 50Hz ou 110/120V, 60Hz (par exemple aux États-Unis ou dans le monde entier) Thorens TD125 ou 125 MKII restauré en noir rouge bordeaux métalliséavec bras de lecture original Thorens TP16 et Ortofon VinylMaster Alpha comme micro(Artieklfotos montre un SME 3009 Series II avec Ortofon 2M bleu)Divers bras de lecture SME sont possibles en option Nos platines sont assemblées, modifiées et assemblées avec amour à la main. Chacun deux est unique et diffère par son modèle, sa couleur et son grain de placage. Les boîtiers de haute qualité sont restaurés ou nouvellement fabriqués selon un savoir-faire qualifié. Les composants électriques sont vérifiés, Pièces mobiles huilées et pièces dusure remplacées. Un dernier test dendurance complète le travail complexe. Le client reçoit un appareil haut de gamme.Description de larticle :Bras de lecture : Thorens TP16Ramasser:          Ortofon VinylMaster AlphaFin de course :      NonPlaque intérieure : métalRoulement à plaque :               10mmPieds de lappareil :              pointes réglables en hauteurDimensions de base :             Largeur : 525 mm, profondeur : 413 mm, hauteur 97 mmLes travaux suivants seront réalisés :Révision de composants électroniques et mécaniquesEuh- ou Composants requis pour linstallationRégler et équilibrer les différentes vitessesRéglage et réglage de la suspensionVérification et réglage du bras de lecture et de la cartouche Nettoyage minutieux de lensemble du tourne-disqueRéalisation dun test denduranceLogement:Le boîtier se compose de panneaux latéraux de 40 mm et dune base en MDF de 16 mm dépaisseur. La surface a été peinte avec plusieurs couches de peinture puis scellée avec un vernis transparent. Le panneau de connexion pour tous les câbles requis est situé à larrière. Quatre pointes réglables en hauteur en acier inoxydable chromé sont installées au bas du boîtier. La base est vissée au cadre et peut être facilement retirée.Pieds de lappareil :Il y en a quatre réglables en hauteur au bas du boîtier POINTES Installé en acier inoxydable chromé. La base est vissée au cadre et peut être facilement retirée.Cartouche Ortofon VM Alpha (incluse) :Avec la série VM, Ortofon crée depuis longtemps la cartouche MM de référence, dont le long temps de production et le corps daiguille caractéristique sont bien connus dans le monde entier. Le VM Alpha est lentrée dans la série et constitue un excellent système dentrée de gamme pour les platines vinyles de milieu de gamme. La série VM dOrtofon est compatible entre elles. Vous pouvez donc commencer avec un VM Alpha, puis améliorer la qualité avec la fente daiguille appropriée en utilisant la fente daiguille immédiatement supérieure.Câble audio:Câble de marque. Câble Cinch audio analogique prêt à lemploi pour le câblage des platines ! Grâce au conducteur intérieur de qualité supérieure en cuivre sans oxygène (OFC), ce câble de qualité assure une transmission du signal fidèle à la réalité. La sécurité des contacts et la protection contre la corrosion sont garanties par les contacts enfichables plaqués or 24 carats. Le câble a un son neutre avec une bonne dynamique et un bon espace.Plaque tournante:Le plateau tournant est réalisé en cinq étapes complexes et chronophages poli pour une brillance élevée. Le vernis brillant donne à votre tourne-disque un look unique. Avec scellement de surface à laide dun revêtement protecteur spécial pour éviter le ternissement répété et pour une brillance durable. Courroie dentraînement :Cette courroie de transmission est fabriquée selon les spécifications dorigine Thorens (même matériau et mêmes dimensions).Poids record en acier inoxydable :Avec un poids de 310 g, il garantit que le disque repose bien sur la plaque et fonctionne sans problème. Ce poids record se situe dans la catégorie de poids moyenne. Il accumule juste assez de poids pour amortir les vibrations de la plaque sans exercer de pression sur les coussinets. La suspension du sous-châssis Thorens a été réajustée en conséquence. En lutilisant, vous augmentez les performances sonores de votre système. --Ce qui suit les pièces sont comme Accessoiresör euhunliltique et pas composant ce enchères:Le suivant les pièces sont disponible comme accessoires et pas inclus dans ce enchères:Capot:à poser sur le boîtier : 160,- Pieds dappareil XXL (photos 13, 14 et 15) : 90,-Réglable en hauteur, en acier inoxydable. Poids total 2520g, diamètre 65mm, hauteur 26mmBras de lecture SME (les systèmes adaptés sont sélectionnés en fonction des bras de lecture) : SME Série III (tube du bras de lecture remplaçable, eff. Poids environ 5g): 499,- SME 3009 amélioré (coque fixe, eff. Masse 6,5g) : 499,- SME 3009 S2 amélioré (coque remplaçable, eff. Poids 9,5g) : 499,- SME 3009 Série II (coque remplaçable, eff. Poids 12,5g) : 799,- Système à cartouche MM comprenant linstallation : AUDIO-TECHNICA VM 740ML (Microlinéaire) : 339,- AUDIO-TECHNICA VM 750 SH (Shibata): 439,- AUDIO-TECHNICA VM 760 SLC (ligne spéciale) : 699,-Ortofon 2M Rouge (elliptique) : 109,-Ortofon 2M Blue (elliptique, nu) : 229,-Ortofon 2M Bronze (Fineline) : 390,-Ortofon 2M Noir (Shibata) : 599,-Ortofon 2M Black LVB 250 (Shibata avec porte-aiguille en bore) : 899,- Système MC à cartouche comprenant linstallation : ORTOFON Quintet Rouge (elliptique) : 330,- ORTOFON Quintet Blue (elliptique, nu) : 470,- ORTOFON Quintette Bronze (Fineline) : 660,- ORTOFON Quinted Noir (Shibata): 940,- ORTOFON Cadenza Rouge (Fineline) : 1299,- AUDIO-TECHNICA AT-OC9XEB (elliptique) : 279,-AUDIO-TECHNICA AT-OC9XEN (elliptique, nu) : 369,- AUDIO-TECHNICA AT-33EV (elliptique) : 499,-AUDIO-TECHNICA AT-33PTG/II (Microlinéaire) : 599,-AUDIO-TECHNICA AT-33SA (Shibata) : 799,-Avec la série VM, Ortofon crée depuis longtemps la cartouche MM de référence, dont le long temps de production et le corps daiguille caractéristique sont bien connus dans le monde entier. Le VM Alpha est lentrée dans la série et constitue un excellent système dentrée de gamme pour les platines vinyles de milieu de gamme. La série VM dOrtofon est compatible entre elles. Vous pouvez donc commencer avec un VM Alpha, puis améliorer la qualité avec la fente daiguille appropriée en utilisant la fente daiguille immédiatement supérieure. Câble de marque. Câble Cinch audio analogique prêt à lemploi pour le câblage des platines ! Grâce au conducteur intérieur de qualité supérieure en cuivre sans oxygène (OFC), ce câble de qualité assure une transmission du signal fidèle à la réalité. La sécur