For sale NOTTINGHAM INTERSPACE JUNIOR TURNTABLE WITH 10” INCH. NOTTINGHAM ANALOGUE STUDIO TONEARM IN PERFECT CONDITION .Please check specification on NET…No scratches no damage no issued . House no smoking no kids no pets.Never OBUSED .Heavy around 45 pound shipping .Sorry not original packaging .Thanks

Technics SL 1800 1700 1600 MK2 TONEARM TONE ARM SPACER SCREW 1x SFUM172-13 1x XTN4+12B FOTO REALI . REAL PHOTOS

For sale NOTTINGHAM INTERSPACE JUNIOR TURNTABLE WITH 10” INCH. NOTTINGHAM ANALOGUE STUDIO TONEARM IN PERFECT CONDITION .Please check specification on NET…No scratches no damage no issued . House no smoking no kids no pets.Never OBUSED .Heavy around 45 pound shipping .Sorry not original packaging .Thanks

SME 3009 or 3012 Tonearm Original P1 Metal spacer (VTA) 10mm See images

2 x SME 3009 / 3012 tonearm P1 SPACER - BLACK / 10mmUnused still with protective film . come with screws .I will package very well as always.Please see photos for detail Please ask any questions Before buying Postage within UK Via DPD or Parcel force 48 and overseas by GSP Ebay Global shipping program.

Nottingham Analogue Hyperspace high end turntable in excellent condition. Bought new from the factory with full instructions and set up kit. No issues whatsoever Included in the sale is the optional Wave power supply which was a £1500 upgrade and comes with all factory accessories The tone arm, also included in the sale, is the Nottingham Analogue Space Arm which cost over £1000 and is stunning in its aluminium housing Currently fitted with the Benz Gull Wing cartridge which has got less than 25 hours and Ear 813p pre amp, neither included in this sale, which will be listed at a later date Divorce forces reluctant sale of this stunning setup. My loss your gain!!!! Package Includes bearing oil spirit level and papers The turntable weight is a high end, British made, GCH aluminium clamp Everything is in excellent condition with no issues whatsoever This item is for collection only and sounds sublime. Collection only.

Rega 2mm Tonearm Spacer - Black Used good condition. Was used on my P3 table.

Original Vintage Technics SH-98 Headshell OEM for S-Shaped Tonearm with Spacer. Condition is Used. Shipped with USPS Ground Advantage.

Nottingham Analogue Spacedeck with Studio Tonearm And Heed Power Supply. In fantastic condition please check pictures. Its in fully working condition and sounds absolutely fantastic. Has Nottingham analogue studio tonearm fitted im not sure what the cartridge is fitted could benefit from having better one fitted. Has separate heed power supply which runs on 33.3 and 45 so no messing about with the belt. Tom Fletcher wanted a motor with the lowest possible torque, just enough to keep the platter rotating, so you have to push start the platter. More then welcome a demo at my shop in south norwood Se256ef collection from this address too. Shipping with ups 48 hour fully insured International shipping welcome but please only through ebay International shipping Please check my other hifi items

The R200 tonearm has been around for around 40 years and most (all?) suffer from the same problem of the bias belt degrading and finally snapping, which then makes bias adjustment impossible. To check your arm rotate the bias setting dial and if there is no resistance felt it is likely the belt has failed. The ultimate test is to balance the arm at zero tracking and setting bias to zero: no perceptible anti-clockwise force apparent. Then set to 2g: significant anti-clockwise force should be apparent. If you are lucky it will fail stuck at a fixed setting of 1.5-2.0g, but it is difficult to know where it is actually set. Inside the arm pillar is a miniature toothed belt which moves a magnet up and down to set the required outward force for optimum tracking. The belts are no longer supplied by Rega (if they ever were) and I couldn't find a UK supplier. I finally managed to find a USA supplier, but posting was a very high fixed price for one belt, so I bought a batch to sell on here and then again. That was a few years ago now.   The new belt as supplied is materially superior but somewhat less stiff compared to the original, which means a small spacer must be inserted in order to keep the belt taught and maintain the meshing between two gear wheels. This is vital to getting the belt to function properly. I have laser cut these to the correct profile and attached a self-adhesive backing to stick inside the arm housing. I’m not going to pretend this is a trivial 10 min fix, because it isn’t. To get access to the belt you will have to partially strip the arm pillar assembly and remove the bottom ball race, which was factory set all those years ago for optimum friction and bearing play; taking off is relatively easy, but getting it back and adjusted to optimum is not so easy. I spoke with the well-known Glaswegian tonearm expert before attempting my first repair and he told me that he is not keen on working with the R200. Anyway, I have now fixed many veteran arms for myself and others and have received nothing but positive feedback. However, I’m very hands-on and have worked in micro-systems engineering for years. If you want to have a go to restore your arm here is your chance. I have even helped a few purchasers. I will include a brief instruction sheet although there is a fair amount of advice to be found on-line. You will also need to be able to de-solder and solder the fine internal wires back to the socket connection of the phono leads.   To be clear: what you are buying is a new Kevlar reinforced miniature toothed replacement belt + self-adhesive spacer. If you are thinking of replacing the internal arm wire my advice would be to do this at the same time as belt replacement.