Selling AS-IS damaged LSIM703 cabinet with only the lower mid/woofer attached.. THERE IS NO SONIC ENGINE in this speaker. The woofer plays great. There seems to be a small crack in the cone but does not affect playing good sound. (see phot) All component wiring, cables, etc. included. Also grille in new condition. Hard clip chip in rear left bottom of cabinet. Easily repaired with epoxy or polyplastomer. (See photo) See photos - Other than the grille cover nothing else is included. If picked up locally I can throw in the speaker stand shown in photos—however the stand does not ship with the speaker stand. Thanks for looking!

Speaker has a damaged woofer. Midrange and Tweeter work. Cabinet has damage on rear side. Other than that the Cabinet is in excellent shape. Grill is included along with other items.

polk audio LSIM 703 speakers cherry pair. Some slight abrasions on the cabinets one of the corners is a little bit rough, but not too terrible can be seen in the picturesThe speaker sound phenomenal and are in excellent working condition!I am an experienced eBay shipper and I will construct a very nice strong shipping container will be made out of wood and I will then put that in cardboard box these speakers will be inside, wrapped in bubble wrap and padding to ensure they get to you the buyer in perfect condition,If you have questions, please message me I can respond quickly. Thank you for looking.

For sale is a damaged Polk Audio LSiM 703 Bookshelf Speaker In Cherry. There is visible damage to the enclosure and the woofer surround has a slight wrinkle. The tweeter and midrange are undamaged. The speaker cabinet has been re-assembled and sealed with a white adhesive that is visible on certain parts of the cabinet. All three drivers work / produce sound. The internal crossover works as designed and all original crossover parts are intact. Please bid accordingly. DesignThe rear-ported, three-way LSiM703 incorporates what Polk calls a Dynamic Sonic Engine: its midrange driver and ring-radiator tweeter are housed in an enclosure within the enclosure. The 3.25 midrange driver is mounted above the tweeter in an enclosure thats molded as a single unit. The 1 tweeter has its own tuned enclosure within the Engine. The cones of both the midrange unit and the 6.5 woofer are made of mineral-filled polypropylene, into which air has been injected to form a honeycomb structure. This is intended to provide a combination of light weight, stiffness, and high damping. The speakers crossovers include Mylar and polypropylene capacitors, air-core inductors, and notch filters and Zobel circuits to smooth the impedance curve and provide greater efficiency and extended high-frequency response.Under the veneer are panels of MDF 1 thick on the sides, ¾ thick on the back and bottom, and, on the front, a baffle 1¼ thick.Total Frequency Response36 Hz ? 40,000 HzNominal Impedance8 ohmsLower and Upper -3dB Limits50 Hz ? 30,000 HzTypeOrth Crossover DesignTweeter Midrange Crossover Frequency2800 HzRecommended Amplifier Power Per Channel20 watts ? 200 watts

For sale is a damaged Polk Audio LSiM 703 Bookshelf Speaker In Cherry. There is visible damage to the enclosure and the woofer surround has a slight wrinkle. The tweeter and midrange are undamaged. The speaker cabinet has been re-assembled and sealed with a white adhesive that is visible on certain parts of the cabinet. All three drivers work / produce sound. The internal crossover works as designed and all original crossover parts are intact. Please bid accordingly. DesignThe rear-ported, three-way LSiM703 incorporates what Polk calls a Dynamic Sonic Engine: its midrange driver and ring-radiator tweeter are housed in an enclosure within the enclosure. The 3.25 midrange driver is mounted above the tweeter in an enclosure thats molded as a single unit. The 1 tweeter has its own tuned enclosure within the Engine. The cones of both the midrange unit and the 6.5 woofer are made of mineral-filled polypropylene, into which air has been injected to form a honeycomb structure. This is intended to provide a combination of light weight, stiffness, and high damping. The speakers crossovers include Mylar and polypropylene capacitors, air-core inductors, and notch filters and Zobel circuits to smooth the impedance curve and provide greater efficiency and extended high-frequency response.Under the veneer are panels of MDF 1 thick on the sides, ¾ thick on the back and bottom, and, on the front, a baffle 1¼ thick.Total Frequency Response36 Hz ? 40,000 HzNominal Impedance8 ohmsLower and Upper -3dB Limits50 Hz ? 30,000 HzTypeOrth Crossover DesignTweeter Midrange Crossover Frequency2800 HzRecommended Amplifier Power Per Channel20 watts ? 200 watts

Polk LSiM703 cherry speaker just one tested and working good condition see pics will be well packed and insured.

For sale is a used and functioning Polk Audio LSiM 703 bookshelf speaker in cherry in very good condition. There is wear and tear on the magnetic speaker grill. The gold colored logo is also no longer attached. SOME INFO FROM POLK: DesignThe rear-ported, three-way LSiM703 incorporates what Polk calls a Dynamic Sonic Engine: its midrange driver and ring-radiator tweeter are housed in an enclosure within the enclosure. The 3.25 midrange driver is mounted above the tweeter in an enclosure thats molded as a single unit. The 1 tweeter has its own tuned enclosure within the Engine. The cones of both the midrange unit and the 6.5 woofer are made of mineral-filled polypropylene, into which air has been injected to form a honeycomb structure. This is intended to provide a combination of light weight, stiffness, and high damping. The speakers crossovers include Mylar and polypropylene capacitors, air-core inductors, and notch filters and Zobel circuits to smooth the impedance curve and provide greater efficiency and extended high-frequency response. Under the veneer are panels of MDF 1 thick on the sides, ¾ thick on the back and bottom, and, on the front, a baffle 1¼ thick. Total Frequency Response36 Hz ? 40,000 Hz Nominal Impedance8 ohms Lower and Upper -3dB Limits50 Hz ? 30,000 Hz TypeOrth Crossover Design Tweeter Midrange Crossover Frequency2800 Hz Recommended Amplifier Power Per Channel20 watts ? 200 watts