FEEDBACK MAILING LIST Toggle navigation home Laptops Speakers & Audio Audio/Video Equipment Tablets ALL CATEGORIES contact us home Laptops Speakers & Audio Audio/Video Equipment Tablets ALL CATEGORIES contact us *AS-IS* ACURUS 200X3 Three Channel Power Amplifier product description *Powers On* *Power Light Blinks Green* *Selling ASIS FOR PARTS OR REPAIR* *No Remote, Power Adapter, Or Cables Included* *Item Is In Fair Cosmetic Condition* **Please Note, You Are Purchasing a AS-IS/For Parts Item. There are no returns, refunds or exchanges on AS-IS items** This item has been successfully tested for power on. Item is offered on a AS-IS, HOW-IS basis. Additional features or functions of the unit have not been tested. The photos are of the actual item that the winner will receive and no additional items are available to include in this auction that are not pictured in the photos. SHIPPING DIMENSIONS: 22x16x7          SHIPPING WEIGHT: 30#              SHIPPING COST: $40.00 R7~SH~L3 (D9438A) Payment All auctions are Prepaid Only. We accept online payments through PayPal. We accept International Payments via PayPal. We accept credit cards payments via PayPal. Other forms of payment may be accepted, and are considered on a case by case basis and may incur additional processing fees. All Texas residents please add 8.25% sales tax. International bidders are advised to take shipping charges and customs fees into account before bidding. For problem resolution, information corrections, or for additional information, please contact us through the eBay system. All Offers Considered. Shipping Buyer pays a flat / fixed shipping and handling fee. (for DOMESTIC shipments only to the 48 contiguous states excluding APOs, FPOs, Puerto Rico, Hawaii and Alaska). International shipments (including APOs, FPOs, Puerto Rico, Hawaii and Alaska) will be quoted USPS Air Parcel Post based on winners shipping address. Extra charges such as any applicable Customs Duties and Taxes would be the responsibility of the buyer entirely. INTERNATIONAL BIDDERS are WELCOME but should be totally aware of the extra costs incurred for: SHIPPING, PACKAGING, and the additional CUSTOMS PAPERWORK required which will add to the total shipping costs. Extra Heavy items may require palletizing and shipment via motor freight. All items will be shipped 1-day after we process your payment. Other shipping arrangements are available and will be decided on a case by case basis and may incur additional associated fees. Most shipments are sent insured with signature required, NO exceptions. About Us AS-IS electronics is the premier store for those looking to buy as-is equipment at bargain prices. Contact us **For all questions or concerns please message us through the ebay messaging system.** Sign Up to Receive the Latest News & Updates. Sign up for our official newsletter & get up to date with our new arrivals and also get tips & exclusive offers. SIGN ME UP Useful Links About Us Payments Shipping Contact Us Returns Terms of Use About Us All items are sold as-is without warranty or returns. Read More Payments Copyright © 2021 asis store. All Rights Reserved. Get images that make Supersized seem small.Showcase your items with Auctivas Listing Templates! THE simple solution for eBay sellers. Track Page Views WithAuctivas Counter

Acurus 200x 3 Made in USA Good condition Powerful Amp Great sound Specifications : Rated Power(200 watts)....................Continuous into 8 ohms, 20Hz to 20kHz, ....................0.005% intermodulation distortion ....................No more than 0.06% total harmonic distortion Rated Power(300 watts)....................Continuous into 4 ohms, 20Hz to 20kHz ....................No more than 0.03% total harmonic distortion Signal-to-Noise Ratio........................110dB A-weighted Power Consumption.........................1,200 watts, all three channels driven at rated power Quiescent Power Consumption..........75 watts, all three channels with no signal Input Sensitivity................................1.1V for full rated power Input Impedance..............................20k ohms Frequency Response........................20Hz to 20kHz, +/- 0.1dB .......................10Hz to 100kHz, +/- 0.5dB .......................1Hz to 130kHz, +/- 0.1dB Channel Separation..........................90dB Damping Factor................................8 ohms, 50Hz: 500 Dimensions(w x d x h)......................48.5 x 35.5 x 16 cm Weight............................................18kg Miscellaneous : Made In...........................................USA

Acurus by Mondial A-200X3 Endstufe im guten Zustand mit leichten Gebrauchsspuren! Technische Daten Leistung: 200 Watt pro Kanal dauernd, 3 Kanäle belastet mit 8 Ohm 20 Hz bis 20 kHz nicht mehr als 0.06% THD 250 Watt pro Kanal dauernd , 3 Kanäle belastet mit 4 Ohm 20 Hz bis 20 kHz Eingangs Impedanz: 20 k Ohm Signal to Noise Ratio: 110 dBA Weighted Eingangsempfindlichkeit: 1.1 Volt für Nennleistung Maße: 43,2 cm Breit 17,8 cm Hoch 38,1 cm Tief Gewicht: 21,5 kg Versand möglich, aber teuer wegen dem hohen Gewicht! Am liebsten wäre mir Abholung!

Up for auction is an ACURUS 200X3, power amplifier. The amplifier has 3 channels at 200W RMS/channel and two large power supply filter caps at 24000uF each. The unit is in almost excellent condition, considering the age (see the pictures). This is a 120V model, S/N 7158. All the questions are very welcome. I moved recently in US from Greece, where I was working in Greek Nakamichi service during 90s and I have all the professional equipment (original test tapes, oscilloscope, wow & flutter meter, distortion meter, frequency response meter, CR-7 test unit, 1000ZXL test unit). If you need to service your deck Ill be happy to help you, 7085281523. See also my other items and my feedback. Thank you for looking.

awesome shape, no dents or dings, works perfect, flaws shown in pics

ACURUS 200X3 THREE CHANNEL POWER AMPLIFIER Perfect Working Condition. NOTES: We appreciate your business and want to make sure you’re always 100% satisfied with your product! IF YOU HAVE ANY ISSUE: We kindly ask that you please first message us to work out any issue/concern as our team will assist you asap (usually within 24 hours M-F) WHATS INCLUDED: Please review pictures prior to purchase. ONLY comes with what's pictured. Products will not come with a power adapter unless shown or mentioned in the listing.

Up for sale is my Acurus A200X3 amplifier. 200W per channel @ 8-Ohms. 350W per channel @ 4-Ohms. Made in the USA by Mondial, the same company that makes the renowned Krell brand. Glass epoxy circuit board (not paper). Fully discrete solid state devices (not low cost integrated circuits). Higher cost metal film resistors (not cheaper carbon resistors). High gauge metal chassis with permanently attached nuts and machine screws (not sheet metal screws). An Audiokarma discussion on the product is found with a web search articulating well all of the quality built into this amp. Item will be packaged and protected very well. Check my feedback and buy with confidence...

The Acurus 200X3 is a high end amplifier of exceptional smoothness. This smoothness is not achieved at the expense of detail. The ability to retrieve detail found within the original source has actually been improved. The Symmetrical Channel Configuration reduces harshness and inter-channel anomalies allowing for the increased smoothness and detail. The glass epoxy circuit board employed are found in medical and military equipment. The amplifier has heavy gauge copper wire toroidal transformers for continuous power into lower impedance real world speaker loads. The power reserves are immense to the extent that even after the amplifier is turned off, the music keeps on playing for a few minutes until it slowly fusses out. The amplifier has efficient thermal management and can be played for hours without getting hot. The Acurus 200X3 will not be able to drive very low efficiency speakers such as ribbon/planar type speakers which has impedance of 2 ohms or lower. However, it can drive most 8 ohms speakers with ease and plenty of 4 ohms speakers easily. The sonic qualities of the Acurus 200X3 are characterized as revealing, and forward but not grainy. The bass is powerful and tight, the midrange is smooth and warm, and the highs are appealing and sweet. It is able to play with the most subtle delicacy at a moment, then play at shattering volumes with no strain, and produces a wide and terrific soundstage. The vocals are slightly warm, but when listening to brass instruments it can sometimes become harsh and fatiguing. Drums seem to have vigor and comes alive with the music and cymbal crashes resonate with crispness. The Acurus 200X3 is a capable preamplifier of superb build quality and delivers high end experience time to time without fail. Specifications : Rated Power(200 watts)....................Continuous into 8 ohms, 20Hz to 20kHz, ....................0.005% intermodulation distortion ....................No more than 0.06% total harmonic distortion Rated Power(300 watts)....................Continuous into 4 ohms, 20Hz to 20kHz ....................No more than 0.03% total harmonic distortion Signal-to-Noise Ratio........................110dB A-weighted Power Consumption.........................1,200 watts, all three channels driven at rated power Quiescent Power Consumption..........75 watts, all three channels with no signal Input Sensitivity................................1.1V for full rated power Input Impedance..............................20k ohms Frequency Response........................20Hz to 20kHz, +/- 0.1dB .......................10Hz to 100kHz, +/- 0.5dB .......................1Hz to 130kHz, +/- 0.1dB Channel Separation..........................90dB Damping Factor................................8 ohms, 50Hz: 500 Dimensions(w x d x h)......................48.5 x 35.5 x 16 cm Weight............................................15kg Miscellaneous : Made In...........................................USA Condition.........................................8/10 Product Information : http://www.hbassociates.us/Acurusamps.pdf (Brochure) Reviews : http://www.audioreview.com/cat/amplification/amplifiers/acurus/a200x3/prd_115528_1583crx.aspx http://www.avsforum.com/t/1319601/my-acurus-a200x3-arrived-today

The Acurus 200X3 is a high end amplifier of exceptional smoothness. This smoothness is not achieved at the expense of detail. The ability to retrieve detail found within the original source has actually been improved. The Symmetrical Channel Configuration reduces harshness and inter-channel anomalies allowing for the increased smoothness and detail. The glass epoxy circuit board employed are found in medical and military equipment. The amplifier has heavy gauge copper wire toroidal transformers for continuous power into lower impedance real world speaker loads. The power reserves are immense to the extent that even after the amplifier is turned off, the music keeps on playing for a few minutes until it slowly fusses out. The amplifier has efficient thermal management and can be played for hours without getting hot. The Acurus 200X3 will not be able to drive very low efficiency speakers such as ribbon/planar type speakers which has impedance of 2 ohms or lower. However, it can drive most 8 ohms speakers with ease and plenty of 4 ohms speakers easily. The sonic qualities of the Acurus 200X3 are characterized as revealing, and forward but not grainy. The bass is powerful and tight, the midrange is smooth and warm, and the highs are appealing and sweet. It is able to play with the most subtle delicacy at a moment, then play at shattering volumes with no strain, and produces a wide and terrific soundstage. The vocals are slightly warm, but when listening to brass instruments it can sometimes become harsh and fatiguing. Drums seem to have vigor and comes alive with the music and cymbal crashes resonate with crispness. The Acurus 200X3 is a capable preamplifier of superb build quality and delivers high end experience time to time without fail. Specifications : Rated Power(200 watts)....................Continuous into 8 ohms, 20Hz to 20kHz, ....................0.005% intermodulation distortion ....................No more than 0.06% total harmonic distortion Rated Power(300 watts)....................Continuous into 4 ohms, 20Hz to 20kHz ....................No more than 0.03% total harmonic distortion Signal-to-Noise Ratio........................110dB A-weighted Power Consumption.........................1,200 watts, all three channels driven at rated power Quiescent Power Consumption..........75 watts, all three channels with no signal Input Sensitivity................................1.1V for full rated power Input Impedance..............................20k ohms Frequency Response........................20Hz to 20kHz, +/- 0.1dB .......................10Hz to 100kHz, +/- 0.5dB .......................1Hz to 130kHz, +/- 0.1dB Channel Separation..........................90dB Damping Factor................................8 ohms, 50Hz: 500 Dimensions(w x d x h)......................48.5 x 35.5 x 16 cm Weight............................................15kg Miscellaneous : Made In...........................................USA Condition.........................................8/10 Product Information : http://www.hbassociates.us/Acurusamps.pdf (Brochure) Reviews : http://www.audioreview.com/cat/amplification/amplifiers/acurus/a200x3/prd_115528_1583crx.aspx http://www.avsforum.com/t/1319601/my-acurus-a200x3-arrived-today