Vintage Altec Lansing 421-8LF pair. Tested before removing from the cabinets. In decent shape. Shows signs of usage, time, discoloration, peeling, rust and dust. For replacement or to finish a project. Please check pictures. Thank you

Has a few normal use scratches on the bottom. Tested and works. I have speakers listed for sale as well.

Altec Lansing Volume Control ONLY for VS2421 Powered Audio PC Speaker. Item is in good used condition with some light wear. See pics

Item is 100% Cleaned, tested, and working! Passes sweep and DCR!!Small dent on cone, is NOT a puncture, only a dent, pictured. Rescue Audio - Reviving audio components and preventing landfill waste. A portion of proceeds are donated to select veterans foundations with every purchase. Check our feedback and buy with confidence!

Item is 100% Cleaned, tested, and working! Passes sweep and DCR!! Rescue Audio - Reviving audio components and preventing landfill waste. A portion of proceeds are donated to select veterans foundations with every purchase. Check our feedback and buy with confidence!

Altec Lansing VS2421 Computer Speaker System - Subwoofer W/ Wired Remote. THUMPING!!!! Used Great condition Tested Vibrations from the bass actually caused my phone to fall and break.

See pics for condition lot a

*IF YOU ARE ONLY IN YHR MARKET FOR ONE, MESSAGE ME AND I CAN SPLIT THEM INTO TWO LISTINGS* Nice condition. No rips or tears Some dust from storage. The altec label came off the back of one of them. See pictures for condition. The 421-8LF is a 15-inch low-frequency loud- speaker designed specifically for sound rein- forcement and reproduction systems where high power-handling capacity must be com- bined with high sensitivity and linearity. The 421-8LF is built on a rigid 16-inch die-cast aluminum frame which is designed for either front or rear mounting. An efficient 4.87 pound ceramic magnet structure backs up a high- power voice coil of edge-wound copper ribbon. The voice coil is wound on an aluminum form for maximum strength and heat dissipation and then attached to a carefully-molded paper cone. The entire cone/voice coil assembly is mounted to the frame with a flexible yet linear surround and spider. Together, these components make up a loudspeaker that is efficient yet rugged, linear yet tolerant of large amounts of power. The 421-8LF has a continuous power rating of 100 watts and a frequency response from 35 to 8000 Hz. It is designed for high efficiency, high linearity, low distortion, and wide range. SPECIFICATIONS Type: Low-frequency loudspeaker Construction- Frame (Basket): Structurally reinforced die-cast aluminum Power Rating: 100 watts continuous pink noise band limited from 35 Hz-1000 Hz Cone: Molded fiber Frequency Response: 35 Hz-8000 Hz Pressure Sensitivity: 97 dB SPL with 1 watt input of band-limited pink noise from 250 Hz-1000 Hz measured on axis 4 feet from the cone. Equal to EIA rating of 50 dB SPL measured on axis 30 feet from cone with 1 milliwatt input. Nominal Impedance: 8 ohms Cone Suspension: High-compliance cloth surround with mechanical resistance Voice Coil: Edge-wound copper ribbon Voice Coil Support Material: Aluminum with Kapton insulation Maximum Cone Excursion: 1/2 Nominal Free-Air Cone Resonance: 35Hz Voice Coil Diameter: 3 (7.62 cm) Magnetic Assembly- Magnet Weight: 4.875 pounds Diameter: 16 (40.64 cm) Weight: 20 pounds, 11 ounces (9.40 kg) Mounting Data- Mounting Hole Diameter: 14 (35.87 cm) (may be either front or rear mounted) Mounting Bolt Centers: 8 holes equally spaced on 15% (38.41 cm) diameter circle. Note-Bolt circle can vary from 14% up to 15% Loudspeaker Depth: 64 (15.88 cm) Assembly Weight: 17.5 pounds Magnet Type: Ceramic Flux Density: 14,000 gauss

Cool old heavy speaker looks to be in good usable condition, see all the pictures I offer no guarantees on vintage audio gear other than it will safely get to your address

VINTAGE ALTEC 421A 15 INCH BASS MUSICAL INSTRUMENT SPEAKER DIA-CONE 8 OHMS. A vintage 15” 100 watt speaker in good working condition with no damage to cone. Tested and sounding fine

This listing is for one vintage (1) 15”-Altec Lansing Model #421-8H music instrument bass speaker. Completely refurbished and tested on 09/10/2022 by Speaker Service. The condition is very good and performs like it was originally designed to do. Shipping prices are only valid for the 48 Continental United Stated.

This listing is for one vintage (1) 15”-Altec Lansing Model #421-8H music instrument bass speaker. Completely refurbished and tested on 09/10/2022 by Speaker Service. The condition is very good and performs like it was originally designed to do. Shipping prices are only valid for the 48 Continental United Stated.

This listing is for one vintage (1) 15”-Altec Lansing Model #421-8H music instrument bass speaker. Completely refurbished and tested on 09/10/2022 by Speaker Service. The condition is very good and performs like it was originally designed to do. Shipping prices are only valid for the 48 Continental United Stated.

Haut parleur Altec Lansing avec caisson de basse VS2421En très bon état Attention je naccepte pas les retours.Pour la remise en mains propres, merci de me contacter avant denchérir.

This listing is for one vintage (1) 15”-Altec Lansing Model #421-8H music instrument bass speaker. Completely refurbished and tested on 09/10/2022 by Speaker Service. The condition is very good and performs like it was originally designed to do. Shipping prices are only valid for the 48 Continental United Stated.

...I am pleased to offer this Nice Altec Lansing 421A Bass Musical Instrument Speaker Dia - Cone in good shape...Works Fine... 15 inch... Weights about 20 lbs. 7 ounces... What you see is what you will get and sold as is... Local pick up ok in Southern California in San Diego... Thanks so very much from Jimmy Damm