Bought a used Rega RP8 off of from Speaker Shop in Amhearst NY. When I bought it, I replaced the original Apheta cartridge with an Apheta 2. Its sat in a box thinking I might get a second set up in my house at some point. In 2019, I had Andy @ Needle Clinic (which you can find here: https://phonocartridgeretipping.com/ ) refurbish the entire cartridge. He replaced all 4 wires, plus upgraded the stylus to a new linear contact nude diamond, sapphire cantilever. So, this cartridge is functionally new. Ill be sent protected with its original certificate from Rega. (I paid $500 for this repair) (It is screwed into the top of a tupperware container for protection.) From Rega:Description: Low-output moving-coil phono cartridge. Stylus profile: Vital (hyperelliptical). Output: 0.5mV (recorded velocity not referenced). Recommended load: 100 ohms (active). Weight: 5.9gm (7.1gm with three Rega mounting bolts). Recommended downforce: 1.75gm.Serial Number of Unit Reviewed: 0018.Price: $1695. Approximate number of dealers: 110.Manufacturer: Rega Research Ltd., 119 Park Street, Westcliff on Sea, Essex SS0 7PD, England, UK. Tel: (44) (0)1702-333071. Web: www.rega.co.uk. US distributor: The Sound Organisation, 1009 Oakmead Dr., Arlington, TX 76011. Tel: (972) 234-0182. Fax: (972) 234-0249. Web:

Item Description Rega Planar P10 with Apheta 3 Cartridge - UK Rega DealerExcellent overall condition, one careful owner from new. Supplied in original packaging and shipped via FREE fully insured courier service. All accessories are pictured. Please note any warranty offered is UK warranty only, warranty is not transferable outside of the UK. Free DeliveryWe offer free delivery anywhere in Mainland UK.Fully insured for your peace of mind.International CustomersWe are happy to ship outside the UK on some of our listings.If shipping has not been quoted by eBay through its GSP (Global Shipping Programme) please contact us for a quote. Thanks.Returns PolicyWe want you to be happy with your purchase. If you wish to return an item, please contact us within 14 days to obtain a returns reference.The item must be in the same condition as you received it - including all packaging.Contact UsThe Audiobarn2 Feltimores ParkOld HarlowEssex CM17 0PFTel: 01279 454 860www.theaudiobarn.co.ukRegistered Company No. 9309546VAT No. GB 202 0625 71

Item Description Rega Apheta 3 Moving Coil Cartridge - UK Rega Dealer - Only 6 Months Old Excellent overall condition, one careful owner from new. Only 6 Months old. Supplied in original packaging and shipped via FREE fully insured courier service. All accessories are pictured. Free DeliveryWe offer free delivery anywhere in Mainland UK.Fully insured for your peace of mind.International CustomersWe are happy to ship outside the UK on some of our listings.If shipping has not been quoted by eBay through its GSP (Global Shipping Programme) please contact us for a quote. Thanks.Returns PolicyWe want you to be happy with your purchase. If you wish to return an item, please contact us within 14 days to obtain a returns reference.The item must be in the same condition as you received it - including all packaging.Contact UsThe Audiobarn2 Feltimores ParkOld HarlowEssex CM17 0PFTel: 01279 454 860www.theaudiobarn.co.ukRegistered Company No. 9309546VAT No. GB 202 0625 71

Super Lo hr dealer democomplete with factory mounted Apheta 3 cartridge, Matched serial numbered TTPSU, dustcover, all lit, papers packing etcAll perfect and as newall will be doubled boxedcomes with full Rega warranty!!!please review our excellent feedback and purchase with confidence

Zum Verkauf steht ein Tonabnehmer Rega Apheta 3. Die Marke Rega steht fr hochwertige Tonabnehmer und der Apheta 3 ist keine Ausnahme. Mit seinem elliptischen Diamanten und einer Spulenkonstruktion aus hochreinem Kupfer, bietet er eine hervorragende Klangqualitt. Der Tonabnehmer ist fr seinen warmen und ausgewogenen Klang bekannt und eignet sich perfekt fr Audiophile, die das Beste aus ihren Schallplatten herausholen mchten. Der Apheta ist 12 Monate alt und steht inklusive Rechnung zum Verkauf.

Aus der Familie möchte ich einen Rega RP 10 Plattenspieler verkaufen. Falls ich etwas falsch aufgeschrieben / aufgelistet habe, würde ich mich über eine nette Email freuen. Es handelt sich um einen Rega Plattenspieler (Topmodell und Vorgänger des P10) mit RB2000 Tonarm, der in dieser Modellreihe erstmals eingesetzt wurde,in einem dem Alter entsprechend sehr guten Zustand. Die Haube (originalverpackt und neu), die beiden Antriebsriemen (Original) und der Apheta2 Tonabnehmer sind nagelneu (Originalrechnung s. Fotos). Rega Plattenspieler perfektionieren die Material Auswahl für eine konsequente Leichtbauweise: Sandwich Bauweise aus geschäumten Phenolharz. Neues Excenter Gegengewicht und Korund Plattenteller (weiss). Der Plattenspieler ist in der Ausführung schwarz glänzend und wiegt 6 kg. Separates Netzteil RP10-PSU. Kopie der Bedienungsanleitung liegt bei. Voll geserviced : Ölwechsel Tellerlager. Neue Riemen und Tonabnehmer. Tonabnehmer justiert, Plattenspieler eingestellt. Seriennummer: 1538Nichtrauchergerät Der Verkauf erfolgt unter Ausschluss jeglicher Gewährleistung. Keine Rücknahme.E49

Brand: RegaModel: RP10 with Apheta 2 cartridge Operation: Tested and fully operational, speed check, belt checked and main bearing checked, all in excellent conditionCondition: Preowned near perfect condition with a tiny glue mark on the perspex lid next to the Rega badge Packaging: Complete manufacturers packagingShipping: Free UK shipping, international shipping via DHL or Fedex

About this product:Innovative Design and Construction Equate to State-of-the-Art Vinyl LP Playback: Rega Planar 8 Turntable Features Triple-Glass Platter, Neo PSU Power Supply, and RB880 TonearmInspired by Regas pinnacle creation (the Naiad), the companys U.K.-built Planar 8 turntable goes beyond mere evolution and enters a design realm of its very own. Engineered to squeeze out details embedded in LP grooves with a degree that belies its price class, Planar 8 is both practical and luxury analog. An ultra-lightweight skeletal plinth comprised of a polyurethane foam core, double-braced stress-beam assembly, three-piece super-flywheel-effect laminated glass platter, and new RB880 tonearm combine to provide optimal rigidity, dampening, and stiffness. A new, perfectly round drive belt and Regas Neo PSU power supply deliver immaculate accuracy and user-adjustable control. The option of purchasing Planar 8 with a pre-mounted Ania, Ania Pro, or Apheta 3 moving-coil cartridge heightens its levels of fun and flexibility, not to mention money-saving appeal.Indeed, in addition to value, the words exemplary and innovative might be the operative terms that best describe Planar 8. For starters, look at the radical plinth distinguished by angles and cutouts – an ingenious design that minimizes mass while increasing rigidity and, by way of its Tancast 8 polyurethane foam core construction, prevents energy absorption. The forward-thinking approach extends to a phenolic brace located between the tonearm mount and main bearing, adding extra reinforcement while barely upping overall mass. Then theres the triple-glass platter, a flywheel-effect type that bulks up in mass at the rim while retaining a lightness that makes the main bearings job a breeze.Setting up Planar 8 is easy, particularly if you order it with a cartridge, which is pre-mounted at the factory. (See the pull-down menu above, which has options for three different models of moving-coil cartridges: the Ania, Ania Pro, or Apheta 3.) Simply remove the packaging protecting the main bearing and tonearm, fit the tracking weight, and set the bias.Sonically, Planar 8 immediately reveals itself as an incredibly insightful musical instrument. It plays vinyl LPs with a combination of authority, coherency, control, and drive that evokes the sensation of sitting in a recording studio alongside the musicians. Youll hear a stunning abundance of attack, sustain, and weight, along with precise audiophile characteristics, such as clarity, tautness, and remarkable dynamics.Discerning listeners and audio manufacturers often talk about the sweet spot. With Planar 8, Rega has done more than attain it – the British analog experts sit you right down within it. While delivering each musical strand with clarity, it manages to tie everything together to produce a cohesive and massively enjoyable whole. Its this combination of hi-fi analysis and simply communicating the emotion in the music that the Rega does so well.– What Hi-Fi?, five-star reviewRegas Planar 8 really advances the idea of what constitutes state-of-the-art vinyl playback at this price. Almost regardless of the cartridge you end up choosing, it has the remarkable ability to thrill and entertain and is an exceptionally well-thought-out design that really delivers.– Hi-Fi Choice, Editors Choice reviewThis is a phenomenal turntable and one that makes a justifiable claim to being state of the art at the price point, and it takes our award.—AVForums, Editors Choice, Best Turntable, £1,000 and OverIf your goal is to play and enjoy records and not worry about tweaking, the Planar 8 is easy to recommend. At this price point its a major sonic and structural step up for Rega and it runs at the correct speed!– Michael Fremer, Analog PlanetIf you are looking for maximum musical intensity for your pound, dollar, or euro, you will be very hard-pressed to find a better turntable at anywhere near this price. I am a Rega RP10 user myself, but Ive been hearing new things on this newcomer at nearly half the price: It truly is a triumph of analog audio engineering.– Jason Kennedy, The EarDouble-Brace Technology Prevents Energy AbsorptionA super-lightweight plinth combines with a phenolic resin double brace mounted specifically where the increased rigidity is required (between the tonearm mounting and the main hub bearing), forming a structurally sound stressed-beam assembly. Planar 8s rigid plinth design prevents energy absorption and unwanted resonances that add unnatural distortions to the music. Similarly, heavier mass can transfer more unwanted energy – such as motor or bearing noise – directly into the rotating record. The use of braces instead of the complete skin allows double-thickness phenolic resin in key areas while providing further weight reduction to the plinth, directly addressing the issue of mass absorption and unwanted energy transmission.Ultra-Lightweight Plinth Also Offers Increased RigidityThe Planar 8 is the second Rega turntable constructed using the ultra-lightweight Tancast 8 polyurethane foam core, a material developed for the aerospace industry. This foam core comes sandwiched between two layers of HPL (high-pressure laminate). HPL is exceptionally thin and extremely rigid. The innovative construction makes Planar 8s skeletal plinth 30% lighter than the original RP8 while offering increased rigidity over the prior model.Brand-New RB880 Tonearm Delivers Incredible StabilityRega introduces the RB880 tonearm, equipped with an improved vertical bearing assembly constructed using an aluminum and stainless-steel, low-mass assembly with vastly improved stability and rigidity. RB880 employs Regas advanced, preloaded zero-tolerance bearing assembly adjusted to less than 1/1000th of a millimeter, allowing for friction-free movement and zero levels of unwanted play. The subtle structure is only visible via small windows at the rear of the new bias housing assembly. A thinner stainless steel balance weight also allows greater adjustability and compatibility. In addition, RB880 is terminated with a redesigned, low-capacitance phono cable terminated with high-quality locking phono plugs for excellent connection.Super Flywheel-Effect Triple-Layer Glass Platter: Light and StiffPlanar 8 employs a three-piece laminated-glass platter constructed from two different high-quality Pilkington glasses. As a general rule, the platter is the only part of a turntable that requires extra mass – to achieve constant rotational speed. However, a heavier platter creates more problems for the main bearing design, meaning an ideal compromise creates the best solution. Practically speaking, it relates to keeping as much of the mass to the outside rim of the glass platter to create more flywheel effect but keeping the inside of the platter as light as possible without sacrificing stiffness.24-Volt Low-Noise Motor Assembly Removes All Stress on Motor BodyPlanar 8 features Regas latest-generation, 24-volt, synchronous, low-vibration motor technology. Uniquely mounted using the highest level of coupling while retaining higher vibration isolation than on any previous Rega model, the new motor-mounting technique (mounted from the bottom) borrows from Regas cost-no-object Naiad. The unique mounting method removes all stress on the motor body. In effect, the reduced vibration and more rigid mounting delivers superior drive from the new EBLT drive belts. Each motor is hand-tuned to match its own custom Neo power supply before fitting to the turntable in order to optimize the anti-vibration circuit.EBLT Drive Belt: Perfectly Round and Dimensionally AccurateRega spent three years researching and developing the use of a bespoke rubber compound for drive belts. The result of a specialized curing system, the new drive belt offers superior consistency of modulus (a constant representing the degree to which a substance has a particular property, especially elasticity). EBLT belts are manufactured on Rega-designed, super-accurate tools that produce perfectly round and dimensionally accurate belts, critical for ideal speed stability.Neo Power Supply Unit: Electronic Speed Change and Anti-Vibration ControlRegas Neo Power Supply Unit affords electronic speed change, advanced anti-vibration control, and user-adjustable electronic speed adjustment. Built upon a high-stability crystal, Neo PSUs DSP generator divides the accurate signal from the crystal to the exact frequency needed to turn the turntable platter at the given speed. It also produces near-perfect sinusoidal waveforms to drive the motor, ultimately generating a 24V AC balanced signal with amazingly minimal distortion.Low-Mass Hub Bearing AssemblyPlanar 8 uses a new, low-mass central bearing assembly in which a single-piece machined aluminum sub-platter and hardened-tool steel spindle run inside a custom brass housing cleverly mounted within the chassis. The mounting eradicates unwanted potential energy being transferred or stored in the plinth.Preinstalled Cartridge Option: Rega AniaRega Ania is not your ordinary high-end MC phono cartridge. It benefits from Regas complete overhaul of its cartridge-manufacturing facilities as well as the nearly 10 years it invested in developing Aphelion and Apheta 2. Hand-built in England with precision, reliability, and cutting-edge expertise, and offering musical playback defined by richness, elegance, and front-to-back dynamics, Ania changes whats possible in the world of sub-$1K phono cartridges. Designed with the assistance of CAD technology, Ania features a body comprised of PPS-Forton, a sophisticated polymer-glass amalgam whose complex shape helps keeps strength high, mass low, and debilitating resonances to a minimum. The tie-wire-less Ania also boasts a floating iron cross generator, hand-wound to the cantilevers inner tip with ultra-high-purity copper wire. Along with the powerful neodymium magnet, many of Anias parts actually come straight from Apheta 2. An elliptical stylus and CAD-designed plastic case complete a musical instrument that invites you to see right into the heart of its performance.Preinstalled Cartridge Option: Rega Apheta 3Apheta 3 features a super high-powered, neodymium magnet and a coil meticulously hand-wound on an iron cross that is 50% smaller than its MK1 predecessor. This weight reduction allows for greater freedom to track the vinyl groove with increased accuracy. Apheta 3 is housed in a completely redesigned, single-piece, aluminum anodized body and protected by a CAD-designed, smoked rigid cover to protect the internal fine wires, making it safe to handle while fitting. The cutting-edge Apheta 3 design was inspired by innovative thinking, precision engineering, modern materials, and stringent testing. Moving-coil aficionados will recognize this model as the fulfillment of the quest for ultra-clear high frequencies combined with firm, tight bass, and stunningly accurate midrange tones. SKU: UTRA1983297A Warranty: This unit comes with a 30 day Music Direct warranty. Whats Included:Accessories: Power supply, platter, mat, counter weight, quick start guide, dust cover, Apheta 3 MC cartridge, stylus guard, cartridge alignment tool, dust cover corner pads (x2), original packing Notes: 9/10 Condition with no signs of damage or abuse. All functions tested successfully, sonically perfect. Specifications: Enter product specs and details. Shipping Policy: If you require shipping to Alaska, Hawaii, or Puerto Rico, please contact us first before making an offer.

Verkauft wird ein High-End Plattenspieler Rega RP 8 + Apheta 2 + Rega RB 808 Tonarm und Filzmatte . Alles spielt in der Spitzenklasse. Platenspieler ist in einem Sehr guten Zustand und Funktioniert einwandfrei. Gekauft wurde er 2017 als Vorführgerät . Neupreis ca. 4000 € incl. Tonabnehmer . Der Tonabnehmer kostet neu 1500 € Ein luftig lebendiger sehr detailreicher Spieler . Im Netz sind noch Tests zu dem Plattenspieler. OVP ist vorhanden. Der Verkauf erfolgt unter Ausschluss jeglicher Gewährleistung, da dies eine Privatauktion ist. Keine Rücknahme.

Planar 10 turntable with P10 PSU with Apheta 3 MC factory fitted. On Sep-03-23 at 10:02:29 PDT, seller added the following information: Sorry its brand new in the box so i dont have actual pics of it cause its never been opened. Im selling for a friend so its sitting at his dads house until it sells then ill go get it to ship it. Hes in jail so he wants me to sell it for him for bail money. It is indeed a 910 with auphetta 3. On Sep-05-23 at 09:47:29 PDT, seller added the following information: This is brand new still in box. It is a P10. Because so many have been skeptical about the item because of the pictures i will allow phone calls to verify whatever you want verified. Just message me and i will give you my number

Rega Apheta - Moving-Coil Cartridge. This superb MC has only been used lightly, I would guess less than 1000 hours of play. It performs beautifully. My only caution is that the green connecting post may move if a tight cartridge tag is forced onto it. Please TAKE CARE when fitting, as the single copper wires on the inside of the cartridge are delicate. The post is not loose, but it moved when I initially fitted it to my turntable in 2016. Questions welcome

Rega Apheta - Moving-Coil Cartridge. This superb MC has only been used lightly, I would guess less than 1000 hours of play. It performs beautifully. My only caution is that the green connecting post may move if a tight cartridge tag is forced onto it. Please TAKE CARE when fitting, as the single copper wires on the inside of the cartridge are delicate. The post is not loose, but it moved when I initially fitted it to my turntable in 2016. Questions welcome

Brand: RegaModel: RP10 with Apheta 2 cartridge Operation: Tested and fully operational, speed check, belt checked and main bearing checked, all in excellent conditionCondition: Preowned near perfect condition with a tiny glue mark on the perspex lid next to the Rega badge Packaging: Complete manufacturers packagingShipping: Free UK shipping, international shipping via DHL or Fedex

Rega RP10 in excellent condition. The Apheta 3 cartridge has less than 100hrs on it as well as the table. It will be carefully packed and insured prior to shipping. I can provide a video of the turntable playing a record upon request. If you have any questions concerning the table please feel free to reach out.

Fantastic Rega RP10 Turntable c/w original PSU and Apheta 2 Moving Coil Cartridge, new belts fitted, fully tested and working perfectly. The cartridge has had a maximum of 100 hours use and the stylus tip is in excellent shape - no sibilance, no inner groove distortion. The RB2000 tonearm and heavyweight acrylic platter bearings are perfect and both speeds run completely true. The outer plinth that the lid attaches to is removable and it seems to be the case that most owners set the deck up utilising just the inner plinth sat on its three conical feet. Please note that the 3 rubber o rings that sit inside the outer plinth have perished but can be sourced through a Rega dealer should you want to replace (please see photos). Cosmetically the deck is in great shape overall with a few light scuffs and scratches on the lid and similar on the top of the psu - the tonearm and platter are perfect with no dints or chips. The RP10 is built to a very high standard, everything feels very solid and this is also matched by its sonic performance - it is musical, engaging, articulate and quick with great dynamics, it stays true to the original recorded material and is endlessly listenable, a very special deck indeed. It comes complete with the original packaging and though we have stated UK buyers only we may be open to shipping overseas if full insurance is paid. 100% positive feedback - any questions please ask away : )

$2,400 REGA - Apheta 3 MC Phono Cartridge It came new installed on Rega P10 turntable but the stylus got bended during installation. The cartridge was sent to re-tip service done by cartridge_retipping-5 (look for his workshop here on eBay), it is now back in mint/new condition and is up for sale It will be shipped professionally packed, same way it was shipped for re-tipping, then back. Look for this listing on usaudiomart site (same description) for lower and tax-free price Check my other ad on Rega P10 turntable and other Tracking Pressure: 1.9 - 2.00gInput load impedance: 100 ohmsOutput impedance: 10 ohmsNominal output voltage: 350?VChannel Balance: ? 20?VSeparation: ? -29dBMass: 6gLoad settings for adjustable MC stages: Impedance: 100ohm Capacitance: 1000pF Gain setting: High (On position for Rega phono stages) Hear Full-Range Sound, from Ultra-Clear High Frequencies to Firm, Taut, Deep Bass: Hand-Wound Rega Apheta 3 Moving-Coil Cartridge Features Fine-Line Nude-Diamond StylusAnchored by one of the smallest moving-coil generators in existence, distinguished by a hand-wound iron cross assembly, and fueled by an advanced neodymium magnet, the Rega Apheta 3 moving-coil cartridge delves deep into vinyl LP grooves and plays music with pleasing warmth, soulfulness, and purity. True to Rega tradition, it excels at reproducing clear, high frequencies and firm, tight bass, giving the listener involving full-range performance. Voiced to seamlessly harmonize with Rega Planar 8 and Planar 10 turntables, it also gels with models from other manufacturers.Now in its third generation, Apheta 3 significantly improves upon the original Rega Apheta by touting far tighter tolerances and exponentially higher detail. It also represents an upgrade from Apheta 2 via its fine-line-profile nude-diamond stylus mounted through at 90 degrees, which leads to increases in detail and accuracy. Apheta 3 also comes housed within a completely redesigned, single-piece, aluminum anodized body protected by a CAD-designed, smoked rigid cover, all of which makes handling during installation (and otherwise) safe from breakage. Its the best-sounding Rega cartridge Ive heard.—Michael Fremer, StereophileHear More Detail, Nuance, and Tonal Character from Your LPsApheta 3 ranks as one of the principle achievements in Regas vaunted history. Its hand-wound iron cross and coil assembly is 50 percent smaller than that of the original, providing a weight reduction that allows far greater freedom to track vinyl grooves. As a result, you hear more detail, more nuance, more tonal character, more of everything you want to experience. With Apheta 3 Rega developed a state-of-the-art diamond profile of a fine line design mounted through 90 degrees (the same technique used in the companys Aphelion reference model). The result: Apheta 3 extracts even more detail from the record grooves. No Tie Wire or Foam Damper in SightConventional moving-cartridge cartridges utilize a steel suspension system (tie wire) that creates a high-amplitude H.F. resonance (normally around 8-12kHz). Such resonance is unacceptable and usually damped by a rudimentary piece of foam rubber. However, the foam rubber deteriorates with age and cannot prevent the complete structure from vibrating and ringing. The specifics and adjustment of the tie wire and damping determine whether the cartridge is under-damped (bright) or over-damped (warm and bass heavy). A happy medium between the two is rarely achieved. Such issues encouraged Rega to pursue a new direction inspired by modern materials and the basic laws of magnetism. Apheta 3 contains neither a tie wire nor a foam damper.

Normal 0 false false false EN-GB X-NONE X-NONE Rega RP10 Turntable with Apheta 2 Cartridge and PSU Rega RP10 Turntable comes with official power supply. In very good used condition with surface scratches and small marks. In full working order. Please check all of the photographs as these helps to form part of the description. If you require any help with your order, please don’t hesitate to contact us by eBay contact form.

Rega P8 with Apheta 3 MC Cartridge & Neo Power Supply Stunning Rega turntable Immaculate condition Current specification Original packaging Dust cover and felt mat Tracked and insured delivery or collect in person Commission sale on behalf of one of our customers Please contact us for further details

Normal 0 false false false EN-GB X-NONE X-NONE Rega RP10 Turntable with Apheta 2 Cartridge and PSU Rega RP10 Turntable comes with official power supply. In very good used condition with surface scratches and small marks. In full working order. Please check all of the photographs as these helps to form part of the description. If you require any help with your order, please don’t hesitate to contact us by eBay contact form.