For sale ARCAM DELTA 120.2 power amplifier in good working and cosmetic condition. Flagship Arcam Delta model from back 90s. Real dual mono design. British signature sound. Excellent build quality. 120VAC model. Quite rare on North American market. All original parts. Low hours unit. AC and DC coupling inputs for the best compatibility. Amplifier have speaker protection circuit, so no thumps or DC on the output fears. Continuous Power OutputBoth channels, 8 ohms, 20Hz-20kHz, 105WSingle channel, 8 ohms, 1kHz, 280WSingle channel, 4 ohms, 1kHz, 355WTHD, 1kHz, 80% max, output, 0.01%Peak Current Rating 25AFrequency response 0.5dB, 10Hz-20kHzInput sensitivity 1.00VInput impedance 10kOhmSignal to noise ratio 100dB Amplifier did receive pro maintenance and in good working condition. All capacitors were tested. 6 power resistors were replaced as preventative measure. All soldering points were inspected for defects. Will be packed well for safe shipping. Comes as pictured with power cord. Will be guaranteed to be working on arrival. Sorry, no extended warranty for old electronics.

For sale ARCAM DELTA 120.2 power amplifier in good working and cosmetic condition. Flagship Arcam Delta model from back 90s. Real dual mono design. British signature sound. Excellent build quality. Quite rare on North American market. All original parts. Lo hours unit. AC and DC coupling inputs for the best compatibility. Amplifier have speaker protection circuit, so no thumps or DC fears. Continuous Power OutputBoth channels, 8 ohms, 20Hz-20kHz, 105WSingle channel, 8 ohms, 1kHz, 280WSingle channel, 4 ohms, 1kHz, 355WTHD, 1kHz, 80% max, output, 0.01%Peak Current Rating 25AFrequency response 0.5dB, 10Hz-20kHzInput sensitivity 1.00VInput impedance 10kOhmSignal to noise ratio 100dB Amplifier did receive pro maintenance and in good working condition. All capacitors were tested and found in specs. 6 power resistors were replaced as preventative measure. All soldering points were inspected for cold spots. Will be double boxed for safe shipping. Comes as pictured with power cord. Will be guaranteed to be working on arrival. Sorry, no extended warranty for old electronics.

Analogue Audio 120WPC continuous power output into 4 or 8 ohms loads (all 7 channels driven at 1kHz) Stereo output power over 150WPC into 4 or 8 ohms, 20Hz to 20kHz Huge toroidal power transformer and high efficiency class G amplifier ensures ample power for even the most demanding programme material In 5.1 speaker setups channels 6 & 7 assignable to bi-amplify front left and right or for use in Zone 2 Audiophile quality components for best sound quality Multi-channel 7.1 analogue input for DVD-A or SACD sources Stereo direct mode bypasses and disables all digital processing for 2 channel analogue sources 9 stereo analogue inputs (including one MM phono input & front 3.5mm AUX input) Zone 2 stereo audio, from analogue inputs (Source and volume control independent from main zone) Zone 3 stereo audio, from analogue inputs Linked to Zone 2, volume control independent DAB/FM/AM or FM/AM stereo tuner with 50 presets Sirius Home Connect compatible input Support for iPod via Arcam rLead / rDock (independent of RS232 connection) Digital Audio State of the art Analog Devices ADSP-21366 & ADSP-21367 DSPs for surround decoding Crystal Semiconductor 24bit 192kHz DACs, stereo ADC and precision electronic volume controls Dolby TrueHD, Dolby Digital+, Dolby Digital EX, Dolby Pro Logic IIx, DTS HD Master Audio, DTS High Resolution Audio, DTS-ES Discrete, DTS-ES Matrix, DTS96/24, DTS Neo:6 Dolby Volume processing for balancing of program material gain and tonal balance Adjustable crossover switching 40Hz, 60Hz, 80Hz, 100Hz, 120Hz, 150Hz 8 digital inputs 4 rear optical, 3 co-axial, 1 front 3.5mm optical AUX input Global audio delay, adjustable from 0-1000 milliseconds, to compensate for video processing delays in digital displays and sources USB input for audio file playback from UPnP mass storage devices Ethernet connection for Internet Radio and audio streaming Video 5 HDMI inputs (up to 1080p, Deep Colour) 2 HDMI outputs (up to 1080p, Deep Colour) 5 Component inputs, one monitor output (up to 1080i) 5 S-video inputs, one monitor output, 2 tape outputs 5 Composite video inputs, one monitor output, 2 tape outputs Full video up/down conversion & frame rate conversion of all inputs where technically allowed Video enhancements: Edge enhancement, Mosquito noise reduction, Random noise reduction, Block noise reduction Custom Install Features Independent Zone 2 (audio & video), with fixed/variable volume Zone 3 audio with fixed/variable volume RC-5 remote input jacks for all three zones IR pass through for source components Full suite of discrete IR RC-5 codes, including separate on / off etc 12Volt triggers, on / off for zones 1, 2 and 3 Full duplex RS232 control input for more complex control systems General Supplied with back-lit CR102 learning remote control with support for up to 7 other components and a huge on-board code library Large, high contrast dimmable VFD front panel display User switchable between 120 & 230Volt mains supplies Size – 435mm (17.1in) wide, 435mm (17.1in) deep, 185mm (7.3in) high Weight 64 lbs - See more at: http://www.arcam.co.uk/products,fmj,av-amplifiers,avr600.htm#sthash.5lOEHQnZ.dpuf

SOLD AS-IS FOR PARTS OR REPAIR. It may function properly but I have not fully tested it so I am selling it FOR PARTS OR REPAIR IN “AS-IS” CONDITION WITH ABSOLUTELY NO RETURNS ACCEPTED! This Arcam FMJ AVR600 home theater receiver is being sold for parts or repair. With HDMI, 7.1 channels and 120 watts of power, it is a high-quality piece of equipment that could potentially be restored to working condition with the right expertise. It includes 5 inputs, 2 outputs, and supports various audio formats including DTS, Dolby Pro Logic and Dolby Digital. It also has banana speaker jacks for audio output and is compatible with DVD-audio. The receiver is a model Arcam AVR 600 from the brand Arcam.

ARCAM AVR 300 AV SURROUND SOUND RECEIVER, 120 WATTS PER CHANNEL WITH REMOTE. IN EXCELLENT CONDITION AND PERFECT WORKING ORDER.Dolby Digital EX, DTS ES, DTS 24/96 & Dolby Pro logic IIx decodingHDTV compatible component / RGB switchingComposite and S-video up conversion to component or RGBSecond zone output with audio and videoTwo way RS 232 control portRDS tuner on boardAudiophile sound quality for movies and musicTuning range: FM, MWPower output: 120 watts per channel into 8? (stereo)Surround output: 100W (front), 100W (center), 100W (rear), 100W (sub)Frequency response: 20Hz to 20kHzTotal harmonic distortion: 0.02%Input sensitivity: 500mV (line)Signal to noise ratio: 100dB (line)Output: 2V (Pre out)Speaker load impedance: 4? (minimum)Digital inputs: coaxial, opticalVideo Connections: component, composite, SVHSDimensions: 433 x 420 x 145mmWeight: 16.2kgAccessories: mains lead, remote control

SOLD AS-IS FOR PARTS OR REPAIR. It may function properly but I have not fully tested it so I am selling it FOR PARTS OR REPAIR IN “AS-IS” CONDITION WITH ABSOLUTELY NO RETURNS ACCEPTED! This Arcam FMJ AVR600 home theater receiver is being sold for parts or repair. With HDMI, 7.1 channels and 120 watts of power, it is a high-quality piece of equipment that could potentially be restored to working condition with the right expertise. It includes 5 inputs, 2 outputs, and supports various audio formats including DTS, Dolby Pro Logic and Dolby Digital. It also has banana speaker jacks for audio output and is compatible with DVD-audio. The receiver is a model Arcam AVR 600 from the brand Arcam.

Analogue Audio 120WPC continuous power output into 4 or 8 ohms loads (all 7 channels driven at 1kHz) Stereo output power over 150WPC into 4 or 8 ohms, 20Hz to 20kHz Huge toroidal power transformer and high efficiency class G amplifier ensures ample power for even the most demanding programme material In 5.1 speaker setups channels 6 & 7 assignable to bi-amplify front left and right or for use in Zone 2 Audiophile quality components for best sound quality Multi-channel 7.1 analogue input for DVD-A or SACD sources Stereo direct mode bypasses and disables all digital processing for 2 channel analogue sources 9 stereo analogue inputs (including one MM phono input & front 3.5mm AUX input) Zone 2 stereo audio, from analogue inputs (Source and volume control independent from main zone) Zone 3 stereo audio, from analogue inputs Linked to Zone 2, volume control independent DAB/FM/AM or FM/AM stereo tuner with 50 presets Sirius Home Connect compatible input Support for iPod via Arcam rLead / rDock (independent of RS232 connection) Digital Audio State of the art Analog Devices ADSP-21366 & ADSP-21367 DSPs for surround decoding Crystal Semiconductor 24bit 192kHz DACs, stereo ADC and precision electronic volume controls Dolby TrueHD, Dolby Digital+, Dolby Digital EX, Dolby Pro Logic IIx, DTS HD Master Audio, DTS High Resolution Audio, DTS-ES Discrete, DTS-ES Matrix, DTS96/24, DTS Neo:6 Dolby Volume processing for balancing of program material gain and tonal balance Adjustable crossover switching 40Hz, 60Hz, 80Hz, 100Hz, 120Hz, 150Hz 8 digital inputs 4 rear optical, 3 co-axial, 1 front 3.5mm optical AUX input Global audio delay, adjustable from 0-1000 milliseconds, to compensate for video processing delays in digital displays and sources USB input for audio file playback from UPnP mass storage devices Ethernet connection for Internet Radio and audio streaming Video 5 HDMI inputs (up to 1080p, Deep Colour) 2 HDMI outputs (up to 1080p, Deep Colour) 5 Component inputs, one monitor output (up to 1080i) 5 S-video inputs, one monitor output, 2 tape outputs 5 Composite video inputs, one monitor output, 2 tape outputs Full video up/down conversion & frame rate conversion of all inputs where technically allowed Video enhancements: Edge enhancement, Mosquito noise reduction, Random noise reduction, Block noise reduction Custom Install Features Independent Zone 2 (audio & video), with fixed/variable volume Zone 3 audio with fixed/variable volume RC-5 remote input jacks for all three zones IR pass through for source components Full suite of discrete IR RC-5 codes, including separate on / off etc 12Volt triggers, on / off for zones 1, 2 and 3 Full duplex RS232 control input for more complex control systems General Supplied with back-lit CR102 learning remote control with support for up to 7 other components and a huge on-board code library Large, high contrast dimmable VFD front panel display User switchable between 120 & 230Volt mains supplies Size – 435mm (17.1in) wide, 435mm (17.1in) deep, 185mm (7.3in) high Weight 64 lbs - See more at: http://www.arcam.co.uk/products,fmj,av-amplifiers,avr600.htm#sthash.5lOEHQnZ.dpuf

Analogue Audio 120WPC continuous power output into 4 or 8 ohms loads (all 7 channels driven at 1kHz) Stereo output power over 150WPC into 4 or 8 ohms, 20Hz to 20kHz Huge toroidal power transformer and high efficiency class G amplifier ensures ample power for even the most demanding programme material In 5.1 speaker setups channels 6 & 7 assignable to bi-amplify front left and right or for use in Zone 2 Audiophile quality components for best sound quality Multi-channel 7.1 analogue input for DVD-A or SACD sources Stereo direct mode bypasses and disables all digital processing for 2 channel analogue sources 9 stereo analogue inputs (including one MM phono input & front 3.5mm AUX input) Zone 2 stereo audio, from analogue inputs (Source and volume control independent from main zone) Zone 3 stereo audio, from analogue inputs Linked to Zone 2, volume control independent DAB/FM/AM or FM/AM stereo tuner with 50 presets Sirius Home Connect compatible input Support for iPod via Arcam rLead / rDock (independent of RS232 connection) Digital Audio State of the art Analog Devices ADSP-21366 & ADSP-21367 DSPs for surround decoding Crystal Semiconductor 24bit 192kHz DACs, stereo ADC and precision electronic volume controls Dolby TrueHD, Dolby Digital+, Dolby Digital EX, Dolby Pro Logic IIx, DTS HD Master Audio, DTS High Resolution Audio, DTS-ES Discrete, DTS-ES Matrix, DTS96/24, DTS Neo:6 Dolby Volume processing for balancing of program material gain and tonal balance Adjustable crossover switching 40Hz, 60Hz, 80Hz, 100Hz, 120Hz, 150Hz 8 digital inputs 4 rear optical, 3 co-axial, 1 front 3.5mm optical AUX input Global audio delay, adjustable from 0-1000 milliseconds, to compensate for video processing delays in digital displays and sources USB input for audio file playback from UPnP mass storage devices Ethernet connection for Internet Radio and audio streaming Video 5 HDMI inputs (up to 1080p, Deep Colour) 2 HDMI outputs (up to 1080p, Deep Colour) 5 Component inputs, one monitor output (up to 1080i) 5 S-video inputs, one monitor output, 2 tape outputs 5 Composite video inputs, one monitor output, 2 tape outputs Full video up/down conversion & frame rate conversion of all inputs where technically allowed Video enhancements: Edge enhancement, Mosquito noise reduction, Random noise reduction, Block noise reduction Custom Install Features Independent Zone 2 (audio & video), with fixed/variable volume Zone 3 audio with fixed/variable volume RC-5 remote input jacks for all three zones IR pass through for source components Full suite of discrete IR RC-5 codes, including separate on / off etc 12Volt triggers, on / off for zones 1, 2 and 3 Full duplex RS232 control input for more complex control systems General Supplied with back-lit CR102 learning remote control with support for up to 7 other components and a huge on-board code library Large, high contrast dimmable VFD front panel display User switchable between 120 & 230Volt mains supplies Size – 435mm (17.1in) wide, 435mm (17.1in) deep, 185mm (7.3in) high Weight 64 lbs - See more at: http://www.arcam.co.uk/products,fmj,av-amplifiers,avr600.htm#sthash.5lOEHQnZ.dpuf

Analogue Audio 120WPC continuous power output into 4 or 8 ohms loads (all 7 channels driven at 1kHz) Stereo output power over 150WPC into 4 or 8 ohms, 20Hz to 20kHz Huge toroidal power transformer and high efficiency class G amplifier ensures ample power for even the most demanding programme material In 5.1 speaker setups channels 6 & 7 assignable to bi-amplify front left and right or for use in Zone 2 Audiophile quality components for best sound quality Multi-channel 7.1 analogue input for DVD-A or SACD sources Stereo direct mode bypasses and disables all digital processing for 2 channel analogue sources 9 stereo analogue inputs (including one MM phono input & front 3.5mm AUX input) Zone 2 stereo audio, from analogue inputs (Source and volume control independent from main zone) Zone 3 stereo audio, from analogue inputs Linked to Zone 2, volume control independent DAB/FM/AM or FM/AM stereo tuner with 50 presets Sirius Home Connect compatible input Support for iPod via Arcam rLead / rDock (independent of RS232 connection) Digital Audio State of the art Analog Devices ADSP-21366 & ADSP-21367 DSPs for surround decoding Crystal Semiconductor 24bit 192kHz DACs, stereo ADC and precision electronic volume controls Dolby TrueHD, Dolby Digital+, Dolby Digital EX, Dolby Pro Logic IIx, DTS HD Master Audio, DTS High Resolution Audio, DTS-ES Discrete, DTS-ES Matrix, DTS96/24, DTS Neo:6 Dolby Volume processing for balancing of program material gain and tonal balance Adjustable crossover switching 40Hz, 60Hz, 80Hz, 100Hz, 120Hz, 150Hz 8 digital inputs 4 rear optical, 3 co-axial, 1 front 3.5mm optical AUX input Global audio delay, adjustable from 0-1000 milliseconds, to compensate for video processing delays in digital displays and sources USB input for audio file playback from UPnP mass storage devices Ethernet connection for Internet Radio and audio streaming Video 5 HDMI inputs (up to 1080p, Deep Colour) 2 HDMI outputs (up to 1080p, Deep Colour) 5 Component inputs, one monitor output (up to 1080i) 5 S-video inputs, one monitor output, 2 tape outputs 5 Composite video inputs, one monitor output, 2 tape outputs Full video up/down conversion & frame rate conversion of all inputs where technically allowed Video enhancements: Edge enhancement, Mosquito noise reduction, Random noise reduction, Block noise reduction Custom Install Features Independent Zone 2 (audio & video), with fixed/variable volume Zone 3 audio with fixed/variable volume RC-5 remote input jacks for all three zones IR pass through for source components Full suite of discrete IR RC-5 codes, including separate on / off etc 12Volt triggers, on / off for zones 1, 2 and 3 Full duplex RS232 control input for more complex control systems General Supplied with back-lit CR102 learning remote control with support for up to 7 other components and a huge on-board code library Large, high contrast dimmable VFD front panel display User switchable between 120 & 230Volt mains supplies Size – 435mm (17.1in) wide, 435mm (17.1in) deep, 185mm (7.3in) high Weight 64 lbs - See more at: http://www.arcam.co.uk/products,fmj,av-amplifiers,avr600.htm#sthash.5lOEHQnZ.dpuf

Analogue Audio 120WPC continuous power output into 4 or 8 ohms loads (all 7 channels driven at 1kHz) Stereo output power over 150WPC into 4 or 8 ohms, 20Hz to 20kHz Huge toroidal power transformer and high efficiency class G amplifier ensures ample power for even the most demanding programme material In 5.1 speaker setups channels 6 & 7 assignable to bi-amplify front left and right or for use in Zone 2 Audiophile quality components for best sound quality Multi-channel 7.1 analogue input for DVD-A or SACD sources Stereo direct mode bypasses and disables all digital processing for 2 channel analogue sources 9 stereo analogue inputs (including one MM phono input & front 3.5mm AUX input) Zone 2 stereo audio, from analogue inputs (Source and volume control independent from main zone) Zone 3 stereo audio, from analogue inputs Linked to Zone 2, volume control independent DAB/FM/AM or FM/AM stereo tuner with 50 presets Sirius Home Connect compatible input Support for iPod via Arcam rLead / rDock (independent of RS232 connection) Digital Audio State of the art Analog Devices ADSP-21366 & ADSP-21367 DSPs for surround decoding Crystal Semiconductor 24bit 192kHz DACs, stereo ADC and precision electronic volume controls Dolby TrueHD, Dolby Digital+, Dolby Digital EX, Dolby Pro Logic IIx, DTS HD Master Audio, DTS High Resolution Audio, DTS-ES Discrete, DTS-ES Matrix, DTS96/24, DTS Neo:6 Dolby Volume processing for balancing of program material gain and tonal balance Adjustable crossover switching 40Hz, 60Hz, 80Hz, 100Hz, 120Hz, 150Hz 8 digital inputs 4 rear optical, 3 co-axial, 1 front 3.5mm optical AUX input Global audio delay, adjustable from 0-1000 milliseconds, to compensate for video processing delays in digital displays and sources USB input for audio file playback from UPnP mass storage devices Ethernet connection for Internet Radio and audio streaming Video 5 HDMI inputs (up to 1080p, Deep Colour) 2 HDMI outputs (up to 1080p, Deep Colour) 5 Component inputs, one monitor output (up to 1080i) 5 S-video inputs, one monitor output, 2 tape outputs 5 Composite video inputs, one monitor output, 2 tape outputs Full video up/down conversion & frame rate conversion of all inputs where technically allowed Video enhancements: Edge enhancement, Mosquito noise reduction, Random noise reduction, Block noise reduction Custom Install Features Independent Zone 2 (audio & video), with fixed/variable volume Zone 3 audio with fixed/variable volume RC-5 remote input jacks for all three zones IR pass through for source components Full suite of discrete IR RC-5 codes, including separate on / off etc 12Volt triggers, on / off for zones 1, 2 and 3 Full duplex RS232 control input for more complex control systems General Supplied with back-lit CR102 learning remote control with support for up to 7 other components and a huge on-board code library Large, high contrast dimmable VFD front panel display User switchable between 120 & 230Volt mains supplies Size – 435mm (17.1in) wide, 435mm (17.1in) deep, 185mm (7.3in) high Weight 64 lbs - See more at: http://www.arcam.co.uk/products,fmj,av-amplifiers,avr600.htm#sthash.5lOEHQnZ.dpuf

For Sale Arcam AV40 AV Processor.This has also had the AVR41 HDMI upgrade card so is HDMI 2.1 / HDCP2.3 and supports 8K@60fps [email protected] loads of the latest standards such as 4K, ATMOS and up to 16 channels of processing.Comes with Dirac Full license as part of the AV processor.An additional advanced bass management license is available from Dirac.Has been used to great effect, only selling now as am having a move around.May PX for cheaper AVR. Collection is more than welcome in fact preferred due to value.I may also be able to deliver if close by and previously arranged.If a bit further afield I may also be able to meet up part way if previously arranged. Any questions just ask.

HDMI not working all other audio is working. Comes with remote

For Sale Arcam AV40 AV Processor.This has also had the AVR41 HDMI upgrade card so is HDMI 2.1 / HDCP2.3 and supports 8K@60fps [email protected] loads of the latest standards such as 4K, ATMOS and up to 16 channels of processing.Comes with Dirac Full license as part of the AV processor.An additional advanced bass management license is available from Dirac.Has been used to great effect, only selling now as am having a move around.May PX for cheaper AVR. Collection is more than welcome in fact preferred due to value.I may also be able to deliver if close by and previously arranged.If a bit further afield I may also be able to meet up part way if previously arranged. Any questions just ask.

For Sale Arcam AV40 AV Processor.This has also had the AVR41 HDMI upgrade card so is HDMI 2.1 / HDCP2.3 and supports 8K@60fps [email protected] loads of the latest standards such as 4K, ATMOS and up to 16 channels of processing.Comes with Dirac Full license as part of the AV processor.An additional advanced bass management license is available from Dirac.Has been used to great effect, only selling now as am having a move around.May PX for cheaper AVR. Collection is more than welcome in fact preferred due to value.I may also be able to deliver if close by and previously arranged.If a bit further afield I may also be able to meet up part way if previously arranged. Any questions just ask.

We have this preowned Arcam Delta 120.2 power amplifier in black. It is in good condition with some minor cosmetic marks and scratches which can be seen in the pictures attached;- some scratches and marks in the top left, top right and bottom left corners of the units top face (see pictures 3, 4 and 5).- some small chips on the bottom left of the units front face (see picture 6). The unit comes with a UK mains lead. It does not come with its original packaging, but we will send it in suitable alternate packaging. Unit Serial Number: D12000864 £ 20Mainland UK Delivery Any queries please do not hesitate to contact us. TI-1-64295 Auction items can be viewed and demoed if practical at our demo rooms in Hull, please make an appointment in advance. Fanthorpes Hifi is based in a stunning Edwardian Arcade in Hull East Yorkshire. There are no pressure sales, we only sell the brands we believe in and always put the customer first. We are specialists in CHORD, PMC, Bryston, Devialet, Arcam, Musical Fidelity, Martin Logan amongst others please check our website for more details.