WELCOME TO OUR AUCTION============================== GARRARD RC88/4 PHONO CARTRIDGE TONE ARM HEAD RECORD CHANGER THIS TONE ARM HEAD IS SOLD AS FOUND. PLEASE VIEW ALL PHOTOS THAT WE HAVE PROVIDED FOR YOU ===================================================================================== WE WILL BE LISTING LOTS OF NEW ITEMS WEEKLY DO CHECK BACK. *International Buyers*PLEASE ASK FOR SHIPPING QUOTE BEFORE YOU PLACE A BID. ----------------------------------------------------------------------------------------------- *U.S. BUYERS - $6.00 - 1ST CLASS MAIL

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va = 250V Vg=-2V Ia=1,2mA (Va=250V Vg=-1V Ia=3,2mA) HICKOK TV7D/U EV7-6080 B12 B min=32 (65%) EV2-1030 B12 B min=32 (65%) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) I65 Philips MINIWATT SILVER ANODES IN SHORT GREY RIBBED PLATES COPPER ARM SMALL RING GETTER ?6L1 code 1,1mA/1,2mA (3,2/3,3) 52/53 ! NEW OLD STOCK ! CHECK ALL THE LIST TO BUY OTHER REFERENCES AND COMBINE SHIPPING PLEASE CONTACT ME BEFORE BUYING TO CHECK THE BEST OPTION FOR THE SHIPPING COSTSTUBES ARE QUITE FRAGILE, SO YOU SHOULD PAY A BIT MORE FOR A SAFE PACKAGE THAN A BUBBLE LETTER. I DECLINE ANY RESPONSABILITIES IF YOU CHOOSE LETTER AND YOUR ITEMS ARE DAMAGED DURING TRANSPORT...

GEB by Siemens Munich ECC83/12AX7 code ? I62 Short Plate with double arm getter support (original made by Siemens). Triode matched. Testata e funzionante Triode value: 1.6ma/1.6ma Foto reali dell'oggetto in vendita

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va = 250V Vg=-2V Ia=1,2mA (Va=250V Vg=-1V Ia=3,2mA) HICKOK TV7D/U EV7-6080 B12 B min=32 (65%) EV2-1030 B12 B min=32 (65%) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) I65 Philips MINIWATT SILVER ANODES IN SHORT GREY RIBBED PLATES COPPER ARM SMALL RING GETTER ?6L1 code 1,1mA/1,2mA (3,2/3,3) 52/53 ! NEW OLD STOCK ! CHECK ALL THE LIST TO BUY OTHER REFERENCES AND COMBINE SHIPPING PLEASE CONTACT ME BEFORE BUYING TO CHECK THE BEST OPTION FOR THE SHIPPING COSTSTUBES ARE QUITE FRAGILE, SO YOU SHOULD PAY A BIT MORE FOR A SAFE PACKAGE THAN A BUBBLE LETTER. I DECLINE ANY RESPONSABILITIES IF YOU CHOOSE LETTER AND YOUR ITEMS ARE DAMAGED DURING TRANSPORT...

Welcome to the sale of my Sumiko MDC 800 ( The Arm ) pick up arm. In excellent used condition & full working order.Superb & rare pick up arm from the renowned David Fletcher.There are the usual small marks on the headshell from cartridge mounting and around the base mounting holes. ( please see photos ).Includes the original cable & finger lift & mounting bolts. I do not have the original box but will be well packaged fordelivery. U.K. sale only.Any questions please ask.Thank-you.

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va = 250V Vg=-2V Ia=1,2mA (Va=250V Vg=-1V Ia=3,2mA) HICKOK TV7D/U EV7-6080 B12 B min=32 (65%) EV2-1030 B12 B min=32 (65%) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) I65 Philips MINIWATT SILVER ANODES IN SHORT GREY RIBBED PLATES COPPER ARM SMALL RING GETTER ?6L1 code 1,1mA/1,2mA (3,2/3,3) 52/53 ! NEW OLD STOCK ! CHECK ALL THE LIST TO BUY OTHER REFERENCES AND COMBINE SHIPPING PLEASE CONTACT ME BEFORE BUYING TO CHECK THE BEST OPTION FOR THE SHIPPING COSTSTUBES ARE QUITE FRAGILE, SO YOU SHOULD PAY A BIT MORE FOR A SAFE PACKAGE THAN A BUBBLE LETTER. I DECLINE ANY RESPONSABILITIES IF YOU CHOOSE LETTER AND YOUR ITEMS ARE DAMAGED DURING TRANSPORT...

Shipping: All items will be packed safely in a sturdy package for safe shipping.We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. I am parting out a Garrad RC88 turntable, pls let me know if you need other parts ***Click here for more Garrard Turntables and PartsFIRST PICTURE FOR ILLUSTRATION ONLY!This GARRARD INDEX ARM Size Feeler is from an RC88/4 turntable. Will fit all Garrard turntables from the early to mid 1950s e.g. RC88 RC98 RC121 Cast Aluminum, brown paint, overall lenghh 4 1/4 Height 5 CONDITION: VERY GOOD Very Clean condition, no corrosion. Paint has mild crazing on top. Plastic feeler tip not included Pls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Books, Catalogs, Phonograph and Turntable Items! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Shipping: All items will be packed safely in a sturdy package for safe shipping.We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. I am parting out a Garrad RC88 turntable, pls let me know if you need other parts ***Click here for more Garrard Turntables and PartsFIRST PICTURE FOR ILLUSTRATION ONLY, actual tonearm shown on the following picturesThis GARRARD TONEARM is from an RC88/4 turntable. Will fit all Garrard turntables from the early to mid 1950s e.g. RC88 RC98 RC121 For Tone arms for the Type A A70 and Lab 80 check my other listingsTONE ARM UPPER PART to horizontal pivots. Complete with all screws, tonearm wire leads and counterbalance spring3 pin Stereo ready, wired for Mono, add stereo by adding a third cable. cable about 12 long.Includes both horizontal pivot screws.Cast Aluminum, brown paint, overall length 7 GOOD, paint overall in good glossy condition,7 mm scratche on rear top of the tonearm can be touched up. Otherwise no corrosion or dents. all parts are there Pls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Books, Catalogs, Phonograph and Turntable Items! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

WELCOME TO OUR AUCTION============================== GARRARD RC88/4 PHONO CARTRIDGE TONE ARM HEAD RECORD CHANGER THIS TONE ARM HEAD IS SOLD AS FOUND. PLEASE VIEW ALL PHOTOS THAT WE HAVE PROVIDED FOR YOU ===================================================================================== WE WILL BE LISTING LOTS OF NEW ITEMS WEEKLY DO CHECK BACK. *International Buyers*PLEASE ASK FOR SHIPPING QUOTE BEFORE YOU PLACE A BID. ----------------------------------------------------------------------------------------------- *U.S. BUYERS - $6.00 - 1ST CLASS MAIL

WELCOME TO OUR AUCTION============================== GARRARD RC88/4 PHONO CARTRIDGE TONE ARM HEAD RECORD CHANGER THIS TONE ARM HEAD IS SOLD AS FOUND. PLEASE VIEW ALL PHOTOS THAT WE HAVE PROVIDED FOR YOU ===================================================================================== WE WILL BE LISTING LOTS OF NEW ITEMS WEEKLY DO CHECK BACK. *International Buyers*PLEASE ASK FOR SHIPPING QUOTE BEFORE YOU PLACE A BID. ----------------------------------------------------------------------------------------------- *U.S. BUYERS - $6.00 - 1ST CLASS MAIL

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va = 250V Vg=-2V Ia=1,2mA (Va=250V Vg=-1V Ia=3,2mA) HICKOK TV7D/U EV7-6080 B12 B min=32 (65%) EV2-1030 B12 B min=32 (65%) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) I65 Philips MINIWATT SILVER ANODES IN SHORT GREY RIBBED PLATES COPPER ARM SMALL RING GETTER ?6L1 code 1,1mA/1,2mA (3,2/3,3) 52/53 ! NEW OLD STOCK ! CHECK ALL THE LIST TO BUY OTHER REFERENCES AND COMBINE SHIPPING PLEASE CONTACT ME BEFORE BUYING TO CHECK THE BEST OPTION FOR THE SHIPPING COSTSTUBES ARE QUITE FRAGILE, SO YOU SHOULD PAY A BIT MORE FOR A SAFE PACKAGE THAN A BUBBLE LETTER. I DECLINE ANY RESPONSABILITIES IF YOU CHOOSE LETTER AND YOUR ITEMS ARE DAMAGED DURING TRANSPORT...

LOT OF 3 SIEMENS & HALSKE ECC83 12AX7 TESTED ON A HICKOK TV-7/U TUBETESTER MINIMUM IS 32/32 ( NOS 49/49 ) RESULTS TUBE 1 = 56/58 - I62 ?3F RESULTS TUBE 1 = 63/62 - I62 ?5F RESULTS TUBE 1 = 61/64 - I62 ?6E MADE IN MUNICH GERMANY JUNE 1963/ JUNE 1965 / MAY 1966 SHORT RIBBED GRAY PLATES, DOUBLE ARM GETTER IN NEW SIEMENS REPRO PAPER BOX

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va = 250V Vg=-2V Ia=1,2mA (Va=250V Vg=-1V Ia=3,2mA) HICKOK TV7D/U EV7-6080 B12 B min=32 (65%) EV2-1030 B12 B min=32 (65%) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) I65 Philips MINIWATT SILVER ANODES IN SHORT GREY RIBBED PLATES COPPER ARM SMALL RING GETTER ?6L1 code 1,1mA/1,2mA (3,2/3,3) 52/53 ! NEW OLD STOCK ! CHECK ALL THE LIST TO BUY OTHER REFERENCES AND COMBINE SHIPPING PLEASE CONTACT ME BEFORE BUYING TO CHECK THE BEST OPTION FOR THE SHIPPING COSTSTUBES ARE QUITE FRAGILE, SO YOU SHOULD PAY A BIT MORE FOR A SAFE PACKAGE THAN A BUBBLE LETTER. I DECLINE ANY RESPONSABILITIES IF YOU CHOOSE LETTER AND YOUR ITEMS ARE DAMAGED DURING TRANSPORT...

  TUBE HUNTER VACUUM TUBE GEMSTHESE ARE THE SPECIFICS OF THE TUBE/TUBES/PARTS FOR SALE THESE ARE THE TUBE/TUBES/PARTS FOR SALE:  MANUFACTURER:                               AMPEREX PRODUCTION CITY:                                     HEERLEN TUBE TYPE:    6DJ8 ECC88 DESIGNATION:                                              ORANGE LETTER YEAR:    1969 MONTH:     JUNE DATE CODE MATCH (YES, NO OR SEP):    PAIR ONE MONTH SEPARATION PAINT CONDITION % (SUBJECTIVE):     90% CURVE TRACER ma: NORMAL = 33ma TUBE1  33ma AND 33ma AT 90PV AND 0G CURVE TRACER ma: NORMAL = 33ma TUBE2   34ma AND 35ma AT 90PV AND 0G TRANSCONDUCTANCE:              TUBE 1 NORMAL 1250  12502µmhos AND 1250µmhos TRANSCONDUCTANCE:              TUBE 2 NORMAL 1250  1290µmhos AND 1325µmhos PERCENTAGE OF BOGEY:          TUBE 1              100% AND 100% PERCENTAGE OF BOGEY:          TUBE 2              103% AND 106% PLATES:   GREY SINGLE/PAIR/QUAD/MULTI:    SINGLE GETTER:                                                          FAT SLANTED D DATE CODE                                                   G A C   ? 9 F THESE TUBES HAVE BEEN CURVE TRACER MATCHED. THE CURVES SHOWN IN THE PICTURES ARE OF EACH TRIODE. EXAMINE THE CURVES FOR LINEARITY. THE gm PERCENTAGES IN THE TABLE ARE FROM THE B&K 747B I USED FOR NORMAL TESTING.CURVE TRACER MATCHED!!! TESTING ACCORDING TO DATA SHEETS FOR 6DJ8’S ARE AS FOLLOWS: 90 PLATE VOLTS, MARGINAL GOOD 65%: 21.4ma, LOW NOS 85% = 28ma, NOS 100% = 33ma. THIS PAIR MEASURES: 33, 33, 34, 35ma.Here is one pair of Amperex Orange Letter 6DJ8s. These tubes are in  NOS shape and test NOS. The equipment they were pulled from was dust free which means it saw little use. That means they were on the the shelf waiting for me and you for the last 50 years. Man do these sound wonderful. Im listening to Mr. Tony Bennett right now as I type this, and this Orangie is AWESOME! You have to wonder.....how do they do that? Why do tubes sound SOOOOO much better than solid state? I know the technical reasons, but it still is amazing every time I put on the cans. This pair was made in HERLEEN and carries the AMPEREX ORANGE LTTER label. Tektronix was very picky about the components that went into their equipment. They made the VERY best test equipment of all time in my opinion.  These tube are an embodiment of that fact. They  sound great in my headphone amp, and they will in yours! The silk screen is perfect, and they sound exquisite!!!!    This pair is an exact date matched pair and they are a very close gm match with the same construction and very nice silkscreen.Getem while theyre here, they wont last long!!! I want to see you happy with your purchase. I will never sell a tube that is below standard…… I have sold many tubes here on Ebay, and all my customers have been completely satisfied. I will work with you in good faith if there are any problems, or if you are unsatisfied in any way. I want your business now and in the future, so I assume you are the boss, and I am the employee. All tubes are tested for shorts, continuity, and emissions. I prefer PayPal. ALL CUSTOMERS PLEASE READ ALL NOTES BEFORE BUYING FROM ME !!1.  RETURNS: It is my highest desire that you are completely satisfied with your purchase from me. I will bend over backwards to make sure that you are a happy customer.If anything you buy from me is less than satisfactory, message me BEFORE you either open a case or hit the “item not as described” button.Sound quality is tremendously SUBJECTIVE. For tubes returned for noise or sound quality of any kind you pay for the shipping we refund the purchase. We refund the price of the item NOT THE SHIPPING COST. If we sent the wrong tube we will of course pay for return shipping. For any tubes that are DOA we require that you send a us a picture of the shipping box to show us the damage. We test EVERY tube sent out and none should be DOA unless broken in shipping.2.    PLEASE NOTE:  Tube silkscreen (lettering on the tubes) is VERY fragile. It can be wiped off and destroyed VERY easily. If you wipe off the silkscreen while handling the tube you diminish their value by up to 70%. DO NOT handle the tubes or hold them from the cylinder. ALWAYS hold them from the ENDS. If you are returning tubes and they are not in the same condition cosmetically I cannot give you a full refund. THIS IS VERY IMPORTANT.3.  UNLESS YOU MAKE ARRANGEMENTS WITH US BEFORE YOU PURCHASE, YOU MUST PAY FOR ITEMS PURCHASED WITHIN 2 DAYS OR A CASE WILL BE OPENED FOR AN UNPAID ITEM!!!4. TESTING: I test all tubes that I sell in one way or another, or I will state untested. I have a B&K 747 tube tester. This is a mutual conductance tester. It give a percentage value of gm for the tube under test and checks for shorts and grid emissions. I also use a Tektronix curve tracer for testing triodes. I give a number of evaluations for tubes. One evaluation is a screen shot of the tube with a high voltage applied to the plate. This helps the buyer see the linearity of the tube in question at the highest voltage the tube will see in a real circuit. The Curve tracer steps the triode through 10 gate/grid voltages starting with -10 volts and going to 0 volts. The lines show how the tube conducts throughout that range. At 0 volt the tube is at max conduction and is the top line on the display. It is easy at that point to take where that top line intersects the plate voltage, find the milliamp level and compare it to the datasheet. I give those numbers for you in the Item condition box. To further help the buyer I also include the Design values, for gm and ma readings in the table. This can then be compared to other tube sellers using inferior test methods such as Hickok,  Amplitrex, and other testers. The Tektronix curve tracer gives values within 3% of the actual value. The very best portable testers only can approach 10% accuracy.5.    Please note: The numbers given for gm are what I see on my tester. I DO NOT guarantee that you will see those numbers on your tester. I only guarantee that these tubes will test good, with no shorts, or gas, on a decent calibrated tester. I dont guarantee or imply anything else.6. VERY IMPORTANT!!! Vintage tube testers almost always, due to age, have VERY LOW HEATER VOLTAGES!!!  Every tester I have ever bought is below 6 volts when selecting 6.3 volts. They average 5.8 volts. The voltage NEEDS to be 6.3 and 12.6. You can calibrate a vintage tube tester all you want. If the heater voltage is not right, you will NEVER get the right gm value. I have customers complain that their tubes are not the same as what I see on my tester. They say they have a calibrated tube tester. I have 40 tube testers. On all of them I have an outside regulated DC power supply that feeds the tube tester the correct heater voltage.7. I dont check each and every tube for noise or tone. This is SUBJECTIVE and it is too time consuming. If you dont like the noise level or the tone we offer a hassle free refund policy.  International customers note:1. Please wait for us to invoice you for the correct amount. If you have purchased more than one item, we must calculate how much the shipping will be. Shipping will be HIGHER due to insurance and shipping methods needed for expensive item totals. If you are buying only one item this will not be an issue. 2. Under no circumstances will we state on a US customs a declared value of less than the sale price. This is an honesty issue. We are honest with everyone to the best of our ability to do so. We want you to trust that what we say is true. There cannot be that trust, if we make false statements knowingly to anyone. If your country has tariffs/taxes so high that they cause large numbers of normally honest folks to make false statements, we urge you to work for change of those laws.3 International buyers if you bought more than one item and want combined shipping it will ship in 2 days.4. And all the Angels sang because the heavenly music was playing and it was turned all the way up.    Listing and template services provided by inkFrog

Box open, stand is unused (monitor not included)

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va = 250V Vg=-2V Ia=1,2mA (Va=250V Vg=-1V Ia=3,2mA) HICKOK TV7D/U EV7-6080 B12 B min=32 (65%) EV2-1030 B12 B min=32 (65%) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) I65 Philips MINIWATT SILVER ANODES IN SHORT GREY RIBBED PLATES COPPER ARM SMALL RING GETTER ?6L1 code 1,1mA/1,2mA (3,2/3,3) 52/53 ! NEW OLD STOCK ! CHECK ALL THE LIST TO BUY OTHER REFERENCES AND COMBINE SHIPPING PLEASE CONTACT ME BEFORE BUYING TO CHECK THE BEST OPTION FOR THE SHIPPING COSTSTUBES ARE QUITE FRAGILE, SO YOU SHOULD PAY A BIT MORE FOR A SAFE PACKAGE THAN A BUBBLE LETTER. I DECLINE ANY RESPONSABILITIES IF YOU CHOOSE LETTER AND YOUR ITEMS ARE DAMAGED DURING TRANSPORT...

2.2 TFT LCD Display Modul Brett 240x320 Fuer ILI9341 51 AVR STM32 ARM PIC Q3C8 Nagelneu und hohe QualitaetEs verfuegt PCB-Backplane mit Power IC, SD-Kartensteckplatz.Nur 4 IOs von Ihrem MCU erforderlich.Groesse: 2.2 inchDot : QVGA 240x320 PunkteSchnittstelle 4-Draht SPIMaterial: LeiterplatteLieferinhalt:1 x 2.2 TFT-LCD Display ModulHinweis: Wegen der Lichtstrahlung und Bildschirme koennte der Farbeton in den Fotos sowie des tatsaechlichen Produkts etwas unterschiedlich sein. Der erlaubte Messfehler ist +/- 1-3 cm.

Shipping: All items will be packed safely in a sturdy package for safe shipping.We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. I am parting out a Garrad RC88 turntable, pls let me know if you need other parts ***Click here for more Garrard Turntables and PartsFIRST PICTURE FOR ILLUSTRATION ONLY!This GARRARD INDEX ARM Size Feeler is from an RC88/4 turntable. Will fit all Garrard turntables from the early to mid 1950s e.g. RC88 RC98 RC121 Cast Aluminum, brown paint, overall lenghh 4 1/4 Height 5 CONDITION: GOOD Very Clean condition, no corrosion. Pain has a scratch on the outside of the arm (not seen during normal operation, and a small rubbed spot on top of the shaft end of the leverPlastic feeler tip not included Pls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Books, Catalogs, Phonograph and Turntable Items! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Shipping: All items will be packed safely in a sturdy package for safe shipping.We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. I am parting out a Garrad RC88 turntable, pls let me know if you need other parts ***Click here for more Garrard Turntables and PartsFIRST PICTURE FOR ILLUSTRATION ONLY, actual tonearm shown on the following picturesThis GARRARD TONEARM is from an RC88/4 turntable. Will fit all Garrard turntables from the early to mid 1950s e.g. RC88 RC98 RC121 For Tone arms for the Type A A70 and Lab 80 check my other listingsTONE ARM UPPER PART to horizontal pivots. Complete with all screws, tonearm wire leads and counterbalance spring3 pin Stereo ready, wired for Mono, add stereo by adding a third cable. cable about 12 long.Includes both horizontal pivot screws.Cast Aluminum, brown paint, overall length 7 VERY GOOD, paint overall in good glossy condition, few small scratches on top of the tonearm can be touched up. Otherwise no corrosion or dents. all parts are there Tested works great Pls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Books, Catalogs, Phonograph and Turntable Items! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

SIEMENS & HALSKE ECC83 12AX7 TESTED ON A HICKOK TV-7/U TUBETESTER MINIMUM IS 32/32 ( NOS 49/49 ) RESULTS = 59/59 CODE ON GLASS = I62 ?2K MADE IN MUNICH GERMANY NOVEMBER 1962 SHORT RIBBED GRAY PLATES, DOUBLE ARM GETTER IN NEW SIEMENS REPRO PAPER BOX

NO LOCAL PICK-UPS*NO EXCEPTIONS WE PROVIDE MULTIPLE PICTURES AND VIEWS. PLEASE ASK ANY/ALL QUESTIONS BEFORE BUYING. I AM HAPPY TO ANSWER. UNLESS THIS ITEM IS LISTED AS NEW...ALL OF OUR TOOLS, VINTAGE AND ANTIQUE ITEMS ARE SOLD AS IS IN PICTURED CONDITION WITH SIGNS OF AGE WEAR USE AND PATINA. WE DO NOT CLEAN, ALTER OR REPAIR ANYTHING WE ARE SELLING AS WE FEEL IT IS IMPORTANT TO LET THE PURCHASER DECIDE IF THEY WANT THE ITEM THEY ARE BUYING CLEANED, RESTORED ETC... PLEASE CHECK OUR OTHER AUCTIONS & FEEDBACK AND BID WITH CONFIDENCE!!! All payments are due immediately at time of purchase. please pay promptly or communicate if there is a delay. please do not purchase or bid if you do not intend to pay. we will not accept cancellations. shipping prices are non-negotiable. ask about combined shipping for multiple purchases before buying. DISCLAIMERS, WAIVERS AND INDEMNITY: There are inherent risks involved in using any product, including but not limited to serious physical injury, and possibly death. Purchaser acknowledges that Seller is neither the manufacturer of this Item nor an agent of the manufacturer. Purchaser waives all liability of Seller and claims against Seller for damages, losses, costs, injuries, penalties, expenses, attorney?s fees and all liabilities. Under no circumstances is Seller responsible for special, indirect, incidental or consequential damages. Purchaser agrees to indemnify, defend and hold Seller harmless from and against any and all specified claims. Purchaser knowingly and freely assumes all risks of ownership and use, known and unknown If Purchaser loans, re-sells, gifts, or transfers the Item, Purchaser will obtain transferees agreement of all the terms contained herein. Should any legal cause of action arise, the Purchaser agrees to defend Seller, and hold harmless, and forever release the seller, from any and all legal liability. We ship internationally through EBays Global Shipping Program; the sale of this item may be subject to the regulations by your country?s Administration, state and local regulatory agencies. It is Purchaser?s responsibility to verify your status as an authorized purchaser of this item. Do not bid on this item unless you are an authorized purchaser. Item is shipped as photographed; please review photos carefully. PURCHASER WARRANTS THAT THEY HAVE READ, UNDERSTOOD, AND ACKNOWLEDGE THAT THEY HAVE GIVEN UP SUBSTANTIAL RIGHTS BY THIS AGREEMENT, AND AGREE TO THESE TERMS FREELY AND VOLUNTARILY WITHOUT ANY INDUCEMENT