Audioquest (Audiotruth) Quartz x3 Hyperlitz 3.5 interconnect RCA cables - Pair Click images to enlarge Description Used briefly for a high end home theater setup. About 3.5 feet (40 Inches) long. Sale is for the pair as shown. Absolutely beautiful condition. Works great. 14-day return warranty See my other auctions for more high end gears...!!!.   Shipping within U.S. and Canada will be via USPS Priority mail and insured for the full sale value. Intl buyers should request shipping quote to the country before bidding/ buying. Serious buyers only. Email your questions before you bid. Thanks for buying. Pictures sell! Auctiva offers Free Image Hosting and Editing.300+ Listing Templates! Auctiva gets you noticed! The complete eBay Selling Solution. Track Page Views WithAuctivas Counter

You are bidding on a 3M pair of AudioQuest (AudioTruth) speaker cables. I am the original owner and had these factory bi-wired with AudiQuest to connect to a pair of Dahlquist CA2-W2 speakers which are listed in a separate auction. This is an awesome cable and were around $1,200 new back in 1998 - excluding the additional cost of bi-wiring them where AQ separated the silver wire from the copper (silver runs the tweeters and copper runs the bass). I am including the AQ banana plugs with purchase though the bare wire is long enough to use that as well. The other (bi-wired) ends are connected with silver spades. While these are slightly oxidized over time it is recommended not to clean them as it does NOT affect sound/signal!

Verkaufe 2 x 3 Meter Audioquest Lautsprecherkabel. Modell : audioTRUTH ARGENT+ SOLID FPS SILVER and SOLID FPC-6 COPPER HYPERLITZ - MADE IN USA. Zustand siehe Bilder, funktioniert selbstverständlich tadellos!

Vintage AudioTruth Opal X3 Air Hyperlitz Interconnect Cables One Owner Vintage AudioTruth Opal interconnect speaker cables, about 40” long. Excellent condition; lightly used, sold as-is. Gold-plated. Stamped on cables, but hard to read: “audioTRUTH Opal X3 air-hyperlitz triple balanced FPC (TM) copper Made in USA”. Purchased around 2002. Offered by original owner. © 2023 Scantik. Content may not be reproduced, copied, or altered, in whole or in part, without explicit written permission.

Vintage AudioTruth Opal X3 Air Hyperlitz Interconnect Cables One Owner Vintage AudioTruth Opal interconnect speaker cables, about 40” long. Excellent condition; lightly used, sold as-is. Gold-plated. Stamped on cables, but hard to read: “audioTRUTH Opal X3 air-hyperlitz triple balanced FPC (TM) copper Made in USA”. Purchased around 2002. Offered by original owner. © 2023 Scantik. Content may not be reproduced, copied, or altered, in whole or in part, without explicit written permission.

Vintage AudioTruth Opal X3 Air Hyperlitz Interconnect Cables One Owner Vintage AudioTruth Opal interconnect speaker cables, about 40” long. Excellent condition; lightly used, sold as-is. Gold-plated. Stamped on cables, but hard to read: “audioTRUTH Opal X3 air-hyperlitz triple balanced FPC (TM) copper Made in USA”. Purchased around 2002. Offered by original owner. © 2023 Scantik. Content may not be reproduced, copied, or altered, in whole or in part, without explicit written permission.

Vintage AudioTruth Opal X3 Air Hyperlitz Interconnect Cables One Owner Vintage AudioTruth Opal interconnect speaker cables, about 40” long. Excellent condition; lightly used, sold as-is. Gold-plated. Stamped on cables, but hard to read: “audioTRUTH Opal X3 air-hyperlitz triple balanced FPC (TM) copper Made in USA”. Purchased around 2002. Offered by original owner. © 2023 Scantik. Content may not be reproduced, copied, or altered, in whole or in part, without explicit written permission.

Vintage AudioTruth Opal X3 Air Hyperlitz Interconnect Cables One Owner Vintage AudioTruth Opal interconnect speaker cables, about 40” long. Excellent condition; lightly used, sold as-is. Gold-plated. Stamped on cables, but hard to read: “audioTRUTH Opal X3 air-hyperlitz triple balanced FPC (TM) copper Made in USA”. Purchased around 2002. Offered by original owner. © 2023 Scantik. Content may not be reproduced, copied, or altered, in whole or in part, without explicit written permission.

Here are two (2) sets of excellent AudioQuest (AudioTruth) Quartz x3 Hyperlitz 0.5+ meter (21 tip to tip) Interconnect RCA cables made in the USA. From the original AudioQuest brochure: AudioQuest Quartz uses Hyperlitz balanced construction with the remarkable 99.99997% pure FPC-6 copper. The exceptional AudioQuest #809 RCA plug is resistance welded to Quartz in a process which actually commingles the molecules of the cable and plug into an alloy - essentially a perfect connection, a difference one can actually hear. The #809 plug uses an unusual patented design which eliminates extra internal contacts, ensures a large, self-wiping (cleaning) contact area and provides extraordinary strain-relief. The #809 plug is not difficult to push on, but it does make the best contact. The Quartz x3 audio interconnects contain the following components: 22 awg Solid FPC-6 Copper Conductors, 22 awg Silver Plated Solid LGC Copper Drainwire, Foam Polyethylene Insulation, Foil Shield, PP Filter, and PVC Jacket. These particular cables started out as a single set of 1.0 meter length cables and were sent to AudioQuests San Clemente CA facility to be custom prepared at the factory as 2 sets of 0.5 meter cables. The extra #809 RCA plugs added resulted in a final 21 length (0.5+ meters). The less length a signal has to travel, the better. So, these interconnects are ideal for connecting separate components that are relatively close with no wasted performance or expense from extra long cables. And of course, the RCA plugs have the correct one band and two bands markings for the proper signal direction. These items will be carefully packed (sealed and padded) and shipped by USPS Priority Mail in a Small Flat Rate Box with Tracking and Insurance.

Here are two (2) sets of excellent AudioQuest (AudioTruth) Quartz x3 Hyperlitz 0.5+ meter (21 tip to tip) Interconnect RCA cables made in the USA. From the original AudioQuest brochure: AudioQuest Quartz uses Hyperlitz balanced construction with the remarkable 99.99997% pure FPC-6 copper. The exceptional AudioQuest #809 RCA plug is resistance welded to Quartz in a process which actually commingles the molecules of the cable and plug into an alloy - essentially a perfect connection, a difference one can actually hear. The #809 plug uses an unusual patented design which eliminates extra internal contacts, ensures a large, self-wiping (cleaning) contact area and provides extraordinary strain-relief. The #809 plug is not difficult to push on, but it does make the best contact. The Quartz x3 audio interconnects contain the following components: 22 awg Solid FPC-6 Copper Conductors, 22 awg Silver Plated Solid LGC Copper Drainwire, Foam Polyethylene Insulation, Foil Shield, PP Filter, and PVC Jacket. These particular cables started out as a single set of 1.0 meter length cables and were sent to AudioQuests San Clemente CA facility to be custom prepared at the factory as 2 sets of 0.5 meter cables. The extra #809 RCA plugs added resulted in a final 21 length (0.5+ meters). The less length a signal has to travel, the better. So, these interconnects are ideal for connecting separate components that are relatively close with no wasted performance or expense from extra long cables. And of course, the RCA plugs have the correct one band and two bands markings for the proper signal direction. These items will be carefully packed (sealed and padded) and shipped by USPS Priority Mail in a Small Flat Rate Box with Tracking and Insurance.

Here are two (2) sets of excellent AudioQuest (AudioTruth) Quartz x3 Hyperlitz 0.5+ meter (21 tip to tip) Interconnect RCA cables made in the USA. From the original AudioQuest brochure: AudioQuest Quartz uses Hyperlitz balanced construction with the remarkable 99.99997% pure FPC-6 copper. The exceptional AudioQuest #809 RCA plug is resistance welded to Quartz in a process which actually commingles the molecules of the cable and plug into an alloy - essentially a perfect connection, a difference one can actually hear. The #809 plug uses an unusual patented design which eliminates extra internal contacts, ensures a large, self-wiping (cleaning) contact area and provides extraordinary strain-relief. The #809 plug is not difficult to push on, but it does make the best contact. The Quartz x3 audio interconnects contain the following components: 22 awg Solid FPC-6 Copper Conductors, 22 awg Silver Plated Solid LGC Copper Drainwire, Foam Polyethylene Insulation, Foil Shield, PP Filter, and PVC Jacket. These particular cables started out as a single set of 1.0 meter length cables and were sent to AudioQuests San Clemente CA facility to be custom prepared at the factory as 2 sets of 0.5 meter cables. The extra #809 RCA plugs added resulted in a final 21 length (0.5+ meters). The less length a signal has to travel, the better. So, these interconnects are ideal for connecting separate components that are relatively close with no wasted performance or expense from extra long cables. And of course, the RCA plugs have the correct one band and two bands markings for the proper signal direction. These items will be carefully packed (sealed and padded) and shipped by USPS Priority Mail in a Small Flat Rate Box with Tracking and Insurance.

Here are two (2) sets of excellent AudioQuest (AudioTruth) Quartz x3 Hyperlitz 0.5+ meter (21 tip to tip) Interconnect RCA cables made in the USA. From the original AudioQuest brochure: AudioQuest Quartz uses Hyperlitz balanced construction with the remarkable 99.99997% pure FPC-6 copper. The exceptional AudioQuest #809 RCA plug is resistance welded to Quartz in a process which actually commingles the molecules of the cable and plug into an alloy - essentially a perfect connection, a difference one can actually hear. The #809 plug uses an unusual patented design which eliminates extra internal contacts, ensures a large, self-wiping (cleaning) contact area and provides extraordinary strain-relief. The #809 plug is not difficult to push on, but it does make the best contact. The Quartz x3 audio interconnects contain the following components: 22 awg Solid FPC-6 Copper Conductors, 22 awg Silver Plated Solid LGC Copper Drainwire, Foam Polyethylene Insulation, Foil Shield, PP Filter, and PVC Jacket. These particular cables started out as a single set of 1.0 meter length cables and were sent to AudioQuests San Clemente CA facility to be custom prepared at the factory as 2 sets of 0.5 meter cables. The extra #809 RCA plugs added resulted in a final 21 length (0.5+ meters). The less length a signal has to travel, the better. So, these interconnects are ideal for connecting separate components that are relatively close with no wasted performance or expense from extra long cables. And of course, the RCA plugs have the correct one band and two bands markings for the proper signal direction. These items will be carefully packed (sealed and padded) and shipped by USPS Priority Mail in a Small Flat Rate Box with Tracking and Insurance.

Audiotruth Opal X3 RCA/Phono Interconnect cable (single length as pictured)1 metre long.Used but in good condition.As with a lot of these Audiotruth / Audioquest cables the writing on the cable is very faint but is still visible.

Here are two (2) sets of excellent AudioQuest (AudioTruth) Quartz x3 Hyperlitz 0.5+ meter (21 tip to tip) Interconnect RCA cables made in the USA. From the original AudioQuest brochure: AudioQuest Quartz uses Hyperlitz balanced construction with the remarkable 99.99997% pure FPC-6 copper. The exceptional AudioQuest #809 RCA plug is resistance welded to Quartz in a process which actually commingles the molecules of the cable and plug into an alloy - essentially a perfect connection, a difference one can actually hear. The #809 plug uses an unusual patented design which eliminates extra internal contacts, ensures a large, self-wiping (cleaning) contact area and provides extraordinary strain-relief. The #809 plug is not difficult to push on, but it does make the best contact. The Quartz x3 audio interconnects contain the following components: 22 awg Solid FPC-6 Copper Conductors, 22 awg Silver Plated Solid LGC Copper Drainwire, Foam Polyethylene Insulation, Foil Shield, PP Filter, and PVC Jacket. These particular cables started out as a single set of 1.0 meter length cables and were sent to AudioQuests San Clemente CA facility to be custom prepared at the factory as 2 sets of 0.5 meter cables. The extra #809 RCA plugs added resulted in a final 21 length (0.5+ meters). The less length a signal has to travel, the better. So, these interconnects are ideal for connecting separate components that are relatively close with no wasted performance or expense from extra long cables. And of course, the RCA plugs have the correct one band and two bands markings for the proper signal direction. These items will be carefully packed (sealed and padded) and shipped by USPS Priority Mail in a Small Flat Rate Box with Tracking and Insurance.

Here are two (2) sets of excellent AudioQuest (AudioTruth) Quartz x3 Hyperlitz 0.5+ meter (21 tip to tip) Interconnect RCA cables made in the USA. From the original AudioQuest brochure: AudioQuest Quartz uses Hyperlitz balanced construction with the remarkable 99.99997% pure FPC-6 copper. The exceptional AudioQuest #809 RCA plug is resistance welded to Quartz in a process which actually commingles the molecules of the cable and plug into an alloy - essentially a perfect connection, a difference one can actually hear. The #809 plug uses an unusual patented design which eliminates extra internal contacts, ensures a large, self-wiping (cleaning) contact area and provides extraordinary strain-relief. The #809 plug is not difficult to push on, but it does make the best contact. The Quartz x3 audio interconnects contain the following components: 22 awg Solid FPC-6 Copper Conductors, 22 awg Silver Plated Solid LGC Copper Drainwire, Foam Polyethylene Insulation, Foil Shield, PP Filter, and PVC Jacket. These particular cables started out as a single set of 1.0 meter length cables and were sent to AudioQuests San Clemente CA facility to be custom prepared at the factory as 2 sets of 0.5 meter cables. The extra #809 RCA plugs added resulted in a final 21 length (0.5+ meters). The less length a signal has to travel, the better. So, these interconnects are ideal for connecting separate components that are relatively close with no wasted performance or expense from extra long cables. And of course, the RCA plugs have the correct one band and two bands markings for the proper signal direction. These items will be carefully packed (sealed and padded) and shipped by USPS Priority Mail in a Small Flat Rate Box with Tracking and Insurance.

Enhance your audio experience with this high-quality 6ft speaker cable from AudioQuest's AudioTruth Clear3 collection. Designed to deliver exceptional sound quality, this cable features spade male connectors and is perfect for use with a variety of audio devices. Note that one negative connector has broken off on one cable (see picture), and so these would require some repair to be functional. The other cable is fine.

Ce jeu de câbles HP Audioquest audioTRUTH Midnight 3 2 x 1,50m est en très bon état et livré avec 8 bananes neuves plaqué or assurant un excellent contact sur toute la surface. Ces câbles sont constitués de cuivre de grande pureté dans une configuration spécifique baptisée Hyperlitz.Tel que visible sur la dernière image, le montage fait appel à 14 conducteurs de différents diamètre qui totalise une section de 5,24mm². Cette constitution originale des câbles Hyperlitz procure une très bonne assise du grave, un médium naturel, et un aigu fin et détaillé. La dynamique et une image holographique ne sont pas en reste. Expédition possible : en France et à l’étranger, me consulter pour les frais. Par transporteur avec assurance pour valeur déclarée. Remise en main propre (de préférence) règlement : Espèces / Virement bancaire (préférable)

Audiotruth Opal X3 RCA/Phono Interconnect cable (single length as pictured)1 metre long.Used but in good condition.As with a lot of these Audiotruth / Audioquest cables the writing on the cable is very faint but is still visible.

Ce jeu de câbles HP Audioquest audioTRUTH Midnight 3 2 x 1,50m est en très bon état et livré avec 8 bananes neuves plaqué or assurant un excellent contact sur toute la surface. Ces câbles sont constitués de cuivre de grande pureté dans une configuration spécifique baptisée Hyperlitz.Tel que visible sur la dernière image, le montage fait appel à 14 conducteurs de différents diamètre qui totalise une section de 5,24mm². Cette constitution originale des câbles Hyperlitz procure une très bonne assise du grave, un médium naturel, et un aigu fin et détaillé. La dynamique et une image holographique ne sont pas en reste. Expédition possible : en France et à l’étranger, me consulter pour les frais. Par transporteur avec assurance pour valeur déclarée. Remise en main propre (de préférence) règlement : Espèces / Virement bancaire (préférable)