B&O MMC 20E Moving Magnet Stereo Phono Cartridge complete Stylus Guard, B&O Stylus Brush and B&O Tracking Force Gauge. Please review photos; cantilever straight, clean and properly suspended. Stylus tip sharp and uniform. (See photos). This cartridge is suitable for a number of B&O turntables including: Beogram 1102, 1600, 1602, 2200, 2400, 3400.Please confirm this is the correct cartridge for your application before ordering. Packed to arrive safely and shipped quickly. 100% positive feedback seller! No returns on vintage audio and accessories!!

Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Original Bang & Olufsen MMC4000 Cartridge/Stylus Pre-Owned –Untested Returnable MMC4000 Product Specifications Elliptical naked diamond Radius of curvature 5 x 1,7 mm Frequency range 20 - 25000 Hz+/- 1,5dB Channel separation 1000Hz > 20dB 40 - 10000Hz > 20dB Channel difference <1,5dB Intermodulation <1% Recommended stylus pressure 1g Compliance 30 x 10(-6)cm/dyne Effective tip mass 0,4mg Output mV/cm/sec. 0,6mV/47kOhms Attention: We Ship UPS, USPS and depending on the item. Please, always view pics closely before bidding ! We are a reputable Stereo Store with 45 years experience. Professionally Serviced, Cleaned and Tested by our Technicians. All items are shipped fully Insured. World Class packaging guaranteed to arrive as shown in the pictures. Lower 48 States only Please.

Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Original Bang & Olufsen MMC4000 Cartridge/Stylus Pre-Owned –Untested Returnable MMC4000 Product Specifications Elliptical naked diamond Radius of curvature 5 x 1,7 mm Frequency range 20 - 25000 Hz+/- 1,5dB Channel separation 1000Hz > 20dB 40 - 10000Hz > 20dB Channel difference <1,5dB Intermodulation <1% Recommended stylus pressure 1g Compliance 30 x 10(-6)cm/dyne Effective tip mass 0,4mg Output mV/cm/sec. 0,6mV/47kOhms Attention: We Ship UPS, USPS and depending on the item. Please, always view pics closely before bidding ! We are a reputable Stereo Store with 45 years experience. Professionally Serviced, Cleaned and Tested by our Technicians. All items are shipped fully Insured. World Class packaging guaranteed to arrive as shown in the pictures. Lower 48 States only Please.

BANG OLUFSEN MMC20S STYLUS CARTRIDGE B&O BEOGRAM 2400, 1102, 1100 1700 4002 4004 Tested and working Good used condition

Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Original Bang & Olufsen MMC4000 Cartridge/Stylus Pre-Owned –Untested Returnable MMC4000 Product Specifications Elliptical naked diamond Radius of curvature 5 x 1,7 mm Frequency range 20 - 25000 Hz+/- 1,5dB Channel separation 1000Hz > 20dB 40 - 10000Hz > 20dB Channel difference <1,5dB Intermodulation <1% Recommended stylus pressure 1g Compliance 30 x 10(-6)cm/dyne Effective tip mass 0,4mg Output mV/cm/sec. 0,6mV/47kOhms Attention: We Ship UPS, USPS and depending on the item. Please, always view pics closely before bidding ! We are a reputable Stereo Store with 45 years experience. Professionally Serviced, Cleaned and Tested by our Technicians. All items are shipped fully Insured. World Class packaging guaranteed to arrive as shown in the pictures. Lower 48 States only Please.

Original Bang & Olufsen MMC20S Cartridge/StylusUk stock ready for dispatch NOW  Checked on a spectrum analyser, delicate, accurate and precise matching perfectly to its published specification Tracking perfectly with 1.5gram vertical tracking forceTested on a Beogram 2400-2 and 4002 and sounds crisp and clear on both channelsThe model replacement for the MMC3000Matches black systems like the Beocenter 3600 - available with a cartridge in my other listings giving you the look of the original systemKeep playing your vinyl in the manner it was meant to be heardLow Effective Tip Mass protects your most precious vinyl from wear and damage  Courtesy of Beoworld.org MMC stands for 'Moving Micro-Cross'; the patented moving-iron principle upon which all B&O cartridges were based. This unique system employed a cross-shaped armature which, among other advantages, guaranteed exceptional stereo separation since each channel moves on a separate axis. The job of any pickup cartridge is to transform the record's physical profile (groove modulation) into corresponding electrical signals (which are then amplified or enlarged by the amplifier and turned into audible sound waves by the loudspeaker. A cartridge must perform three separate and exacting tasks if it is to do this job successfully. It must function mechanically (the movements of the stylus in the groove); it must function magnetically (using the physical movements to create changes in a magnetic field); and it must function electrically (using the changes in magnetic flux to generate an electrical current). At each stage, one type of energy is transferred into another, quite different, type. And the transfer must be perfect, with no energy lost and none added from extraneous sources. No cartridge will ever reach this ideal unless the Laws of Physics can be repealed. However, by understanding the relationships between the three transfer stages and continually applying refined engineering techniques, B&O's belief was that each stage of cartridge improvement would bring each successive cartridge closer to the ideal. Record wear and the cartridgeIf you take music seriously the value of your record collection is likely to be high. Many of your records are likely to be irreplaceable. You will also know that the signals pressed into your vinyl discs are very fragile indeed. The pickup cartridge can be the disc's worse enemy since an ill-suited cartridge can mark a record for life in a single play. While B&O is aware that cartridge specifications are inter-related, their research shows consistently that Effective Tip Mass (ETM) is one of the major factors affecting record wear. ETM is the equivalent of the amount of inertia the groove 'sees' in moving or accelerating the stylus tip. Consequently, the higher the ETM value, the higher the force required for a given constant acceleration. Obviously, more force results in more wear. Three elements contribute to ETM. The stylus tip (diamond) contributes with its entire weight and mass. The armature contributes between 5 - 20% of its weight and mass; the cantilever around 30%. B&O has been able to reduce ETM substantially by refining these elements and building them into an integrated unit. The result is a system which not only reduces damage to the groove walls dramatically, but also provides exceptional performance at all frequencies. This was the last of the MMC 20 range to be discontinued with cartridges being available late into the 1990s. It produced a typical warm B&O sound though lacked some of the more expensive models treble clarity. With an ETM of only 0.5mg, it was a fine cartridge and sturdy with it. The company’s range of MMC cartridges were integrated units, combining both stylus and cartridge as one slip-on unit. Matched, balanced and sealed in the factory each unit was meticulously computer tested with its results printed off and offered to the customer at time of sale. The printout included such information as output voltage, relative voltage output (channel balance), channel separation and frequency response. Manufactured: 1979 - 1985 Designer: Jacob Jensen Colours: BlackMMC 20 Cartridges Prior to the release of MMC1 - 5 cartridges, Bang & Olufsen had the following MMC range of combined styli and cartridges: MMC 20 S is a stereo cartridge with a spherical framed diamond

Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Original Bang & Olufsen MMC4000 Cartridge/Stylus Pre-Owned –Untested Returnable MMC4000 Product Specifications Elliptical naked diamond Radius of curvature 5 x 1,7 mm Frequency range 20 - 25000 Hz+/- 1,5dB Channel separation 1000Hz > 20dB 40 - 10000Hz > 20dB Channel difference <1,5dB Intermodulation <1% Recommended stylus pressure 1g Compliance 30 x 10(-6)cm/dyne Effective tip mass 0,4mg Output mV/cm/sec. 0,6mV/47kOhms Attention: We Ship UPS, USPS and depending on the item. Please, always view pics closely before bidding ! We are a reputable Stereo Store with 45 years experience. Professionally Serviced, Cleaned and Tested by our Technicians. All items are shipped fully Insured. World Class packaging guaranteed to arrive as shown in the pictures. Lower 48 States only Please.

Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Original Bang & Olufsen MMC4000 Cartridge/Stylus Pre-Owned –Untested Returnable MMC4000 Product Specifications Elliptical naked diamond Radius of curvature 5 x 1,7 mm Frequency range 20 - 25000 Hz+/- 1,5dB Channel separation 1000Hz > 20dB 40 - 10000Hz > 20dB Channel difference <1,5dB Intermodulation <1% Recommended stylus pressure 1g Compliance 30 x 10(-6)cm/dyne Effective tip mass 0,4mg Output mV/cm/sec. 0,6mV/47kOhms Attention: We Ship UPS, USPS and depending on the item. Please, always view pics closely before bidding ! We are a reputable Stereo Store with 45 years experience. Professionally Serviced, Cleaned and Tested by our Technicians. All items are shipped fully Insured. World Class packaging guaranteed to arrive as shown in the pictures. Lower 48 States only Please.

Normal 0 false false false EN-US X-NONE X-NONE Bang & Olufsen Beogram 2400 Turntable, Very Nice B&O This Bang & Olufsen Beogram 2400 turntable is in excellent condition, functionally and visually. It is fitted with an MMC 10E cartridge. The MMC 10E utilizes a framed elliptical diamond stylus. For information on B&Os use of the superior moving coil MC cartridge design, see this online article: www.ecoustics.com/ask-an-expert/wtf-moving-magnet-coil-phono-cartridges From Beoworld.com, The extreme lightness of the 2400 series arm, together with the highly polished elliptical diamond pickup, resulted in an unusually low Effective Tip Mass (ETM). This means that your records would suffer very little wear, even after continual playing. Neither would they be damaged if the stylus was accidentally skidded across the surface. Thats right. This deck will not scratch your precious vinyl. The fully automatic deck and cartridge perform superbly on my Klipsch Cornwall speakers. This turntable is in about as nice a condition as you can hope to find. I have been through the mechanicals, electronics, and cosmetics. The deck top, the rosewood trim, the dust cover and cover hinges are all very good, as shown. As shown in the top lid closed photo, the dust cover has the B&O logo emblazoned into it. Beogram 2400 Record Deck Product Specifications Speeds 33 - 45 rpm Wow and flutter < 0.06 % Rumble weighted > 65 dB Rumble, unweighted > 45 dB Drive system: Flat Belt Motor Servo controlled DC Power supply 120 V Power consumption 8 W Dimensions W x H x D 17 x 13 x 3.5 inch Weight 13 lb MMC 10E Cartridge Produced from: 1979 - 1985 Designed by: Jacob Jensen Finish: Black metal Recommended tracking force 15 mN / 1.5 g Frequency range: 20 - 20,000 Hz +/- 3 dB Stylus: Elliptical diamond RIAA amplifier: built-in This turntable has twin RCA plugs (not DIN) and a ground for connection to your receiver’s phono inputs. Unit will be well packaged, with suspension locked down for shipment. Guaranteed not DOA. Check our feedback and bid with confidence. Thanks!

Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Original Bang & Olufsen MMC4000 Cartridge/Stylus Pre-Owned –Untested Returnable MMC4000 Product Specifications Elliptical naked diamond Radius of curvature 5 x 1,7 mm Frequency range 20 - 25000 Hz+/- 1,5dB Channel separation 1000Hz > 20dB 40 - 10000Hz > 20dB Channel difference <1,5dB Intermodulation <1% Recommended stylus pressure 1g Compliance 30 x 10(-6)cm/dyne Effective tip mass 0,4mg Output mV/cm/sec. 0,6mV/47kOhms Attention: We Ship UPS, USPS and depending on the item. Please, always view pics closely before bidding ! We are a reputable Stereo Store with 45 years experience. Professionally Serviced, Cleaned and Tested by our Technicians. All items are shipped fully Insured. World Class packaging guaranteed to arrive as shown in the pictures. Lower 48 States only Please.

Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Original Bang & Olufsen MMC4000 Cartridge/Stylus Pre-Owned –Untested Returnable MMC4000 Product Specifications Elliptical naked diamond Radius of curvature 5 x 1,7 mm Frequency range 20 - 25000 Hz+/- 1,5dB Channel separation 1000Hz > 20dB 40 - 10000Hz > 20dB Channel difference <1,5dB Intermodulation <1% Recommended stylus pressure 1g Compliance 30 x 10(-6)cm/dyne Effective tip mass 0,4mg Output mV/cm/sec. 0,6mV/47kOhms Attention: We Ship UPS, USPS and depending on the item. Please, always view pics closely before bidding ! We are a reputable Stereo Store with 45 years experience. Professionally Serviced, Cleaned and Tested by our Technicians. All items are shipped fully Insured. World Class packaging guaranteed to arrive as shown in the pictures. Lower 48 States only Please.

BANG & OLUFSEN BEOGRAM 2400 TURNTABLE WITH MMC4000 QUARDRAPHONIC STYLUS B&O YOU ARE BIDDING ON A BANG & OLUFSEN BEOGRAM 2400 TURNTABLE WITH MMC4000 QUARDRAPHONIC STYLUS B&O. SERIAL #1553158. UNIT POWERS UP AND WORKS. PLATER TURNS AND STYLUS ARM MOVES AS IT SHOULD. TURNTABLE DOES NOT COME WITH DUST COVER AND IS MISSING ITS STOP / PAUSE / TURN BOTTOM COVER (VERY EASY ITEM TO FIND ON EBAY FOR $10. SOME OF THE VENERE ON THE SIDES OF THE UNIT SHOW SOME DAMAGE (VIEW PHOTOS #4 AND #6). ITEM IS BEING SOLD AS IS FOR RESTORATION OR PARTS WITH NO RETURNS. NICE WORKING UNIT TO BE CLEANED UP. BE SURE TO CHECK OUT THE OTHER GREAT ITEMS THAT I HAVE LISTED THIS WEEK. PLEASE EXCUSE ANY GLARE IN THE PHOTOS PLEASE ASK QUESTIONS AND MAKE SURE TO VIEW ALL PHOTOS AS THEY ARE A BIG PART OF THIS LISTING AND SHOW THE CONDITION OF THIS ITEM. I AM NOT VERY KNOWLEDGEABLE ABOUT SOME OF THE ITEMS THAT I LIST, SO PLEASE ASK QUESTIONS AND VIEW ALL PHOTOS!!! IF YOU SHOULD NEED ADDITIONAL PHOTOS - PLEASE DO NOT HESITATE TO ASK FOR THEM!!! ***8.00% CALIFORNIA SALES TAX WILL BE INCLUDED FOR ALL CALIFORNIA RESIDENCE******WE OFFER COMBINED SHIPPING*** ***WE OFFER FREE LOCAL PICK-UP*** ***DO NOT DELIVER TO P.O. BOXES***BUYERS ARE RESPONSIBLE FOR RETURN SHIPPING!!!30 DAYSHANDLING TIME1 BUSINESS DAYPAYMENTI will invoice you promptly, once the auction has ended. Payment must be received within three (3) days of purchase.

BANG & OLUFSEN BEOGRAM 2400 TURNTABLE WITH MMC4000 QUARDRAPHONIC STYLUS B&O YOU ARE BIDDING ON A BANG & OLUFSEN BEOGRAM 2400 TURNTABLE WITH MMC4000 QUARDRAPHONIC STYLUS B&O. SERIAL #1553158. UNIT POWERS UP AND WORKS. PLATER TURNS AND STYLUS ARM MOVES AS IT SHOULD. TURNTABLE DOES NOT COME WITH DUST COVER AND IS MISSING ITS STOP / PAUSE / TURN BOTTOM COVER (VERY EASY ITEM TO FIND ON EBAY FOR $10. SOME OF THE VENERE ON THE SIDES OF THE UNIT SHOW SOME DAMAGE (VIEW PHOTOS #4 AND #6). ITEM IS BEING SOLD AS IS FOR RESTORATION OR PARTS WITH NO RETURNS. NICE WORKING UNIT TO BE CLEANED UP. BE SURE TO CHECK OUT THE OTHER GREAT ITEMS THAT I HAVE LISTED THIS WEEK. PLEASE EXCUSE ANY GLARE IN THE PHOTOS PLEASE ASK QUESTIONS AND MAKE SURE TO VIEW ALL PHOTOS AS THEY ARE A BIG PART OF THIS LISTING AND SHOW THE CONDITION OF THIS ITEM. I AM NOT VERY KNOWLEDGEABLE ABOUT SOME OF THE ITEMS THAT I LIST, SO PLEASE ASK QUESTIONS AND VIEW ALL PHOTOS!!! IF YOU SHOULD NEED ADDITIONAL PHOTOS - PLEASE DO NOT HESITATE TO ASK FOR THEM!!! ***8.00% CALIFORNIA SALES TAX WILL BE INCLUDED FOR ALL CALIFORNIA RESIDENCE******WE OFFER COMBINED SHIPPING*** ***WE OFFER FREE LOCAL PICK-UP*** ***DO NOT DELIVER TO P.O. BOXES***BUYERS ARE RESPONSIBLE FOR RETURN SHIPPING!!!30 DAYSHANDLING TIME1 BUSINESS DAYPAYMENTI will invoice you promptly, once the auction has ended. Payment must be received within three (3) days of purchase.

Description: Selling a BANG OLUFSEN MMC20S STYLUS CARTRIDGE B&O BEOGRAM 2400, 1102, 1100 1700 4002 4004 Item comes as photographed. Needle slightly off center. Uk Only!I am Selling plenty of other unusual and Interesting Items so please do Look!Please be aware this is a delicate and fragile Item. Be Careful on opening.UK buyers, if you are unhappy with the item you may return them within a 7 day period for a refund in full but only once the item has arrived back. If it is a case of choice I would rather the purchaser assumes the cost of the shipping for the return but if broken or damaged in any way I will refund the addition for the shipping. If an item is sold as spares or repairs I offer no refund at all Post Based on Mainland Shipping (highlands and islands, please contact for a quote!)Please allow 5-10 working days for the arrival of any item purchase after payment but I will endeavour to have it to you much sooner.Any other questions feel free to askThe majority of the items I sell are second hand and some times I may miss something. Please dont expect the items to be in new condition there are bound to be marks and signs of useIF YOU HAVE LESS THAN 10 FEEDBACK PLEASE CONTACT ME BEFORE PLACING A BID!!!

Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Original Bang & Olufsen MMC4000 Cartridge/Stylus Pre-Owned –Untested Returnable MMC4000 Product Specifications Elliptical naked diamond Radius of curvature 5 x 1,7 mm Frequency range 20 - 25000 Hz+/- 1,5dB Channel separation 1000Hz > 20dB 40 - 10000Hz > 20dB Channel difference <1,5dB Intermodulation <1% Recommended stylus pressure 1g Compliance 30 x 10(-6)cm/dyne Effective tip mass 0,4mg Output mV/cm/sec. 0,6mV/47kOhms Attention: We Ship UPS, USPS and depending on the item. Please, always view pics closely before bidding ! We are a reputable Stereo Store with 45 years experience. Professionally Serviced, Cleaned and Tested by our Technicians. All items are shipped fully Insured. World Class packaging guaranteed to arrive as shown in the pictures. Lower 48 States only Please.

Original Bang & Olufsen MMC20CL Cartridge/Stylus perfect working order Uk stock ready for dispatch NOW Checked on a spectrum analyser, delicate, accurate and precise matching perfectly to its published specificationTracking perfectly with 1gram vertical tracking force The first B&O cartridge to use a single crystal sapphire cantilever. Get yourself the originalSingle crystal sapphire cantilever offers a very rigid but light structure five times stiffer than aluminium and 21% stiffer than beryllium transferring more of the signal from your vinylEffective tip mass is a very low 0.3mg which ensures low record wear and a high stylus resonance well beyond the audible rangeThe body itself forms an effective Mu-Metal screen against stray hum fields practically eliminating magnetic interference Courtesy of Beoworld.orgMMC stands for Moving Micro-Cross; the patented moving-iron principle upon which all B&O cartridges were based. This unique system employed a cross-shaped armature which, among other advantages, guaranteed exceptional stereo separation since each channel moves on a separate axis.The job of any pickup cartridge is to transform the records physical profile (groove modulation) into corresponding electrical signals (which are then amplified or enlarged by the amplifier and turned into audible sound waves by the loudspeaker.A cartridge must perform three separate and exacting tasks if it is to do this job successfully. It must function mechanically (the movements of the stylus in the groove); it must function magnetically (using the physical movements to create changes in a magnetic field); and it must function electrically (using the changes in magnetic flux to generate an electrical current). At each stage, one type of energy is transferred into another, quite different, type. And the transfer must be perfect, with no energy lost and none added from extraneous sources.No cartridge will ever reach this ideal unless the Laws of Physics can be repealed. However, by understanding the relationships between the three transfer stages and continually applying refined engineering techniques, B&Os belief was that each stage of cartridge improvement would bring each successive cartridge closer to the ideal. Record wear and the cartridgeIf you take music seriously the value of your record collection is likely to be high. Many of your records are likely to be irreplaceable. You will also know that the signals pressed into your vinyl discs are very fragile indeed. The pickup cartridge can be the discs worse enemy since an ill-suited cartridge can mark a record for life in a single play.While B&O is aware that cartridge specifications are inter-related, their research shows consistently that Effective Tip Mass (ETM) is one of the major factors affecting record wear. ETM is the equivalent of the amount of inertia the groove sees in moving or accelerating the stylus tip. Consequently, the higher the ETM value, the higher the force required for a given constant acceleration. Obviously, more force results in more wear.Three elements contribute to ETM. The stylus tip (diamond) contributes with its entire weight and mass. The armature contributes between 5 - 20% of its weight and mass; the cantilever around 30%. B&O has been able to reduce ETM substantially by refining these elements and building them into an integrated unit. The result is a system which not only reduces damage to the groove walls dramatically, but also provides exceptional performance at all frequencies. Any questions just get in touch, Id be glad to help.

Original Bang & Olufsen MMC20CL Cartridge/Stylus perfect working orderChecked on a spectrum analyser, delicate, accurate and precise matching perfectly to its published specificationTracking perfectly with 1gram vertical tracking force The first B&O cartridge to use a single crystal sapphire cantilever. Get yourself the originalSingle crystal sapphire cantilever offers a very rigid but light structure five times stiffer than aluminium and 21% stiffer than beryllium transferring more of the signal from your vinylEffective tip mass is a very low 0.3mg which ensures low record wear and a high stylus resonance well beyond the audible rangeThe body itself forms an effective Mu-Metal screen against stray hum fields practically eliminating magnetic interference Courtesy of Beoworld.orgMMC stands for Moving Micro-Cross; the patented moving-iron principle upon which all B&O cartridges were based. This unique system employed a cross-shaped armature which, among other advantages, guaranteed exceptional stereo separation since each channel moves on a separate axis.The job of any pickup cartridge is to transform the records physical profile (groove modulation) into corresponding electrical signals (which are then amplified or enlarged by the amplifier and turned into audible sound waves by the loudspeaker.A cartridge must perform three separate and exacting tasks if it is to do this job successfully. It must function mechanically (the movements of the stylus in the groove); it must function magnetically (using the physical movements to create changes in a magnetic field); and it must function electrically (using the changes in magnetic flux to generate an electrical current). At each stage, one type of energy is transferred into another, quite different, type. And the transfer must be perfect, with no energy lost and none added from extraneous sources.No cartridge will ever reach this ideal unless the Laws of Physics can be repealed. However, by understanding the relationships between the three transfer stages and continually applying refined engineering techniques, B&Os belief was that each stage of cartridge improvement would bring each successive cartridge closer to the ideal. Record wear and the cartridgeIf you take music seriously the value of your record collection is likely to be high. Many of your records are likely to be irreplaceable. You will also know that the signals pressed into your vinyl discs are very fragile indeed. The pickup cartridge can be the discs worse enemy since an ill-suited cartridge can mark a record for life in a single play.While B&O is aware that cartridge specifications are inter-related, their research shows consistently that Effective Tip Mass (ETM) is one of the major factors affecting record wear. ETM is the equivalent of the amount of inertia the groove sees in moving or accelerating the stylus tip. Consequently, the higher the ETM value, the higher the force required for a given constant acceleration. Obviously, more force results in more wear.Three elements contribute to ETM. The stylus tip (diamond) contributes with its entire weight and mass. The armature contributes between 5 - 20% of its weight and mass; the cantilever around 30%. B&O has been able to reduce ETM substantially by refining these elements and building them into an integrated unit. The result is a system which not only reduces damage to the groove walls dramatically, but also provides exceptional performance at all frequencies. Any questions just get in touch, Id be glad to help.