Ich biete an: Bang & Olufsen B&O Beolab 2000 Aktiv LautsprecherModel / Type: 1642 Gebraucht und funktionsfähig.Optisch in einem einwandfreien Zustand (siehe Fotos)Zur Info: Aus einem nicht-Raucher-Haushalt Versandkostenfrei, top verpackt und zügigem Versand per DHL-Paket mit Sendungsverfolgung.Verkauf und Versand nur innerhalb von Deutschland. Wichtig: Privatverkauf, d.h. keine Garantie / Gewährleistung. Keine Rückgabemöglich. Lieferumfang:- Beolab 2000 (wie oben beschrieben)- Wandhalterung (zur Montage in einer Ecke, s. Foto)- Netzstecker (kurz, s. Foto)

Hello - All of my items are 100% genuine and authentic. - Former B&O employee & product specialist. - Returns Accepted. - Quick Dispatch or local delivery. Welcome to my ebay listing for the following item: Item: Bang and Olufsen B&O Beolab 2000 bluetooth speaker custom Blue black Masterlink Condition: Sound 10/10 - Frets 10/10 - Cabinet 9/10 Can be used with the masterlink to connect to other B&O devices or to your phone/tablet etc via the bluetooth module included. Requires either a beolink 1000 remote or beo4 to set the speaker into bluetooth mode. All cables and bluetooth adapter are included. Comes with instructions for first time set up. Material: Aluminium Description: BeoLab 2000 is a flexible Beolink loudspeaker which is easy to accommodate and gives you the option of hands-on or remote control. On the front panel you choose between CD, tape or radio, turn on & off, up & down. BeoLab 2000 is the second speaker from Bang & Olufsen specially made for the Beolink® system, MasterLink. This product was designed by Anders Hermansen. All its required electronics are housed within the speaker and the only thing needed is a cable to be plugged in. On the front of the speaker there are buttons to select which source to listen: CD, tape and so on, as well as track selection and on/off. There is also a volume control of course. The speaker can also be operated via a remote control - for example the Beo4 or Beolink 1000. The sound is really impressive considering the very small net volume. This speaker is best used in smaller rooms such as kitchens and bedrooms. Because you can reduce the size of the cabinet volume to one-third of the size of a conventional loudspeaker with the same sound capacity. The principle is called Active Loudspeakers, and what you get is a compact loudspeaker that can play at high volume without distortion or damage to its drive units. BeoLab 2000 Specifications Dimensions W x H x D/Weight: 40 x 28.5 x 15.8 cm / 6 kg (on wall) Cabinet finish Aluminium / black plastic Power Consumption:Typical 12 wattsStand-by < 1.8 watts Power amplifier modules 4 units Long-term maximum output power per module* 41 W Effective frequency range* 61 - 20,000 Hz Cabinet principle Bass Reflex Magnetic shielded No Woofer 10 cm Tweeter 2.5 cm Net volume 1.3 litres Connections: Master Link (ML) 1 Link compatibility: Master Link - Built in ICE power Amplifiers. Additional Information: As a former Bang and Olufsen employee of many years I am pleased to bring a selection of B&O New and Used products to the Lake District in Cumbria. I can personally guarantee that all my items are genuine and in great condition. Please do not hesitate to ask me any questions, regarding my items or if you would like any more info or photos. All payment methods accepted: What I expect from you: Good honest ebayers, no time wasters please. What you can expect from me: Honest reliable descriptions and pictures. - Immediate dispatch once the winning bid has been confirmed. - Each item packaged safely & securely. - Quick response to any questions or queries regarding any of my items. - A choice of either insurance or recorded delivery on expensive items. - Prompt in leaving honest and fair feedback.

Wir räumen auf und verkaufen hier unsere Beolab 2000 Aktiv-Lautsprecher. Beolab 2000 ist ein externer, aktiver Stereolautsprecher, der über das Beolink-System (=Beolink-Kabel) die Musik einer anderen B&O Haupt-Stereoanlage abspielt und zusätzlich noch diese Anlage steuern kann. Es können von der Beolab 2000 die Lautstärke, die Musikquelle der Hauptanlage eingestellt werden. Ein Anwendungsbeispiel ist, dass eine B&O Anlage (z.B. Sound Ouvertüre) im Wohnzimmer steht und die mit einem Beolinkkabel verbundene Beolab2000 in einem anderen Raum steht (… z.B. Arbeitszimmer, Büro, Laden, Werkstatt, Küche, Bad, usw.) Meines Wissens kann man sich Beolink Kabel in der passenden Länge konfigurieren lassen. Funktion: Sie wurde funktionierend abgebaut, wir haben jedoch unser Kabel leider beim letzten Umzug verlegt und können sie nicht testen. Unsere Bang&Olufsen Sound Ouvertüre haben wir noch im täglichen Gebrauch, d.h. wer bei der Abholung ein Beolinkkabel mitbringt, kann die Beolab 2000 testen. Gesamthöhe ca. 29cm / Gesamtbreite ca. 40cm / Gesamttiefe ca. 16cm Versicherter Versand oder Abholung nach voriger Absprache in 74072 Heilbronn. Bei einer Übergabe sollte die Bezahlung dann vor Ort stattfinden. Privatverkauf ohne Garantie oder Rücknahme. Siehe auch unsere weiteren Auktionen.

AUX 3.5mm Jack Plug to BeoLab 2000 MasterLink Cable(B&O Remote Control Required for Control i.e. Beo4/BeoLink 1000)(Length: 0.5 Metre - Two-Section Cable)No Reserve Price Finally, a brilliant cable solution to allow you to connect a device to your BeoLab 2000 We are pleased to bring to market this new range of BeoLab 2000 AUX cables. The long awaited cable solution will allow you to connect any device with a 3.5mm headphones/audio OUT connection. Typical examples include, iPad, iPhone, iPod, Android device, TV, computer etc etc. The cable, which consists of two sections (see photographs) connects to the device at one end and the MasterLink plug to the BeoLab 2000, at the other. You will require a B&O remote control, such as a BeoLink 1000 or Beo4, to setup the BeoLab 2000 in to AUX mode. Having setup, you may also wish to control volume level, switch on and off/standby using the remote, although control can be achieved using the hands-on control to BeoLab 2000. The setup process is only made once and does not need to be exercised each and every time you switch on BeoLab 2000. The only time you will need to re-programme is if you have a power cut. This solution allows for complete stand-alone use of the BeoLab 2000 as a loudspeaker. You do not need any other product/a connection to a main B&O setup in order to use in this setup (other than your connected device, of course - iPad etc.). Available in a range of different lengths and also in black or white - Ideal should you have your BeoLab 2000 wall mounted and you need a longer cable.We also have different source connection types available, such as RCA plugs. Available from our eBay store as a different item and also as buy it now. An Instruction set is included with your purchase for programming BeoLab 2000. Payment and Delivery Preferred payment by PayPal, cheque, bank transfer or cash on collection. FAST & FREE STANDARD UK DELIVERY Please click HERE to go to our eBay store home page Custom lengths of cables are available - Please contact us for a quote... Colour: WhiteTotal Length: 0.5 Metre (MasterLink Plug Cable Section Approx. 0.25 Metre) FAST & FREE STANDARD UK DELIVERY Happy Bidding & Good Luck...

Wir räumen auf und verkaufen hier unsere Beolab 2000 Aktiv-Lautsprecher. Beolab 2000 ist ein externer, aktiver Stereolautsprecher, der über das Beolink-System (=Beolink-Kabel) die Musik einer anderen B&O Haupt-Stereoanlage abspielt und zusätzlich noch diese Anlage steuern kann. Es können von der Beolab 2000 die Lautstärke, die Musikquelle der Hauptanlage eingestellt werden. Ein Anwendungsbeispiel ist, dass eine B&O Anlage (z.B. Sound Ouvertüre) im Wohnzimmer steht und die mit einem Beolinkkabel verbundene Beolab2000 in einem anderen Raum steht (… z.B. Arbeitszimmer, Büro, Laden, Werkstatt, Küche, Bad, usw.) Meines Wissens kann man sich Beolink Kabel in der passenden Länge konfigurieren lassen. Funktion: Sie wurde funktionierend abgebaut, wir haben jedoch unser Kabel leider beim letzten Umzug verlegt und können sie nicht testen. Unsere Bang&Olufsen Sound Ouvertüre haben wir noch im täglichen Gebrauch, d.h. wer bei der Abholung ein Beolinkkabel mitbringt, kann die Beolab 2000 testen. Gesamthöhe ca. 29cm / Gesamtbreite ca. 40cm / Gesamttiefe ca. 16cm Versicherter Versand oder Abholung nach voriger Absprache in 74072 Heilbronn. Bei einer Übergabe sollte die Bezahlung dann vor Ort stattfinden. Privatverkauf ohne Garantie oder Rücknahme. Siehe auch unsere weiteren Auktionen.

Hello - All of my items are 100% genuine and authentic. - Former B&O employee & product specialist. - Returns Accepted. - Quick Dispatch or local delivery. Welcome to my ebay listing for the following item: Item: Bang and Olufsen B&O Beolab 2000 link room speaker Silver black Masterlink Condition: Very good condition - Perfect working order -Sound 10/10 - Cabinet 9/10 - Frets 9/10 - some very small age related marks. Can be used with the masterlink to connect to other B&O devices. Optional bluetooth kit available for an extra £99.95 includes remote, specialist cable and bluetooth dongle. Please message if required. Material: Aluminium Description: BeoLab 2000 is a flexible Beolink loudspeaker which is easy to accommodate and gives you the option of hands-on or remote control. On the front panel you choose between CD, tape or radio, turn on & off, up & down. BeoLab 2000 is the second speaker from Bang & Olufsen specially made for the Beolink® system, MasterLink. This product was designed by Anders Hermansen. All its required electronics are housed within the speaker and the only thing needed is a cable to be plugged in. On the front of the speaker there are buttons to select which source to listen: CD, tape and so on, as well as track selection and on/off. There is also a volume control of course. The speaker can also be operated via a remote control - for example the Beo4 or Beolink 1000. The sound is really impressive considering the very small net volume. This speaker is best used in smaller rooms such as kitchens and bedrooms. Because you can reduce the size of the cabinet volume to one-third of the size of a conventional loudspeaker with the same sound capacity. The principle is called Active Loudspeakers, and what you get is a compact loudspeaker that can play at high volume without distortion or damage to its drive units. BeoLab 2000 Specifications Dimensions W x H x D/Weight: 40 x 28.5 x 15.8 cm / 6 kg (on wall) Cabinet finish Aluminium / black plastic Power Consumption:Typical 12 wattsStand-by < 1.8 watts Power amplifier modules 4 units Long-term maximum output power per module* 41 W Effective frequency range* 61 - 20,000 Hz Cabinet principle Bass Reflex Magnetic shielded No Woofer 10 cm Tweeter 2.5 cm Net volume 1.3 litres Connections: Master Link (ML) 1 Link compatibility: Master Link - Built in ICE power Amplifiers. Additional Information: As a former Bang and Olufsen employee of many years I am pleased to bring a selection of B&O New and Used products to the Lake District in Cumbria. I can personally guarantee that all my items are genuine and in great condition. Please do not hesitate to ask me any questions, regarding my items or if you would like any more info or photos. All payment methods accepted: What I expect from you: Good honest ebayers, no time wasters please. What you can expect from me: Honest reliable descriptions and pictures. - Immediate dispatch once the winning bid has been confirmed. - Each item packaged safely & securely. - Quick response to any questions or queries regarding any of my items. - A choice of either insurance or recorded delivery on expensive items. - Prompt in leaving honest and fair feedback.

Hello - All of my items are 100% genuine and authentic. - Former B&O employee & product specialist. - Returns Accepted. - Quick Dispatch or local delivery. Welcome to my ebay listing for the following item: Item: Bang and Olufsen B&O Beolab 2000 bluetooth speaker custom Blue black Masterlink Condition: Sound 10/10 - Frets 10/10 - Cabinet 9/10 Can be used with the masterlink to connect to other B&O devices or to your phone/tablet etc via the bluetooth module included. Requires either a beolink 1000 remote or beo4 to set the speaker into bluetooth mode. All cables and bluetooth adapter are included. Comes with instructions for first time set up. Material: Aluminium Description: BeoLab 2000 is a flexible Beolink loudspeaker which is easy to accommodate and gives you the option of hands-on or remote control. On the front panel you choose between CD, tape or radio, turn on & off, up & down. BeoLab 2000 is the second speaker from Bang & Olufsen specially made for the Beolink® system, MasterLink. This product was designed by Anders Hermansen. All its required electronics are housed within the speaker and the only thing needed is a cable to be plugged in. On the front of the speaker there are buttons to select which source to listen: CD, tape and so on, as well as track selection and on/off. There is also a volume control of course. The speaker can also be operated via a remote control - for example the Beo4 or Beolink 1000. The sound is really impressive considering the very small net volume. This speaker is best used in smaller rooms such as kitchens and bedrooms. Because you can reduce the size of the cabinet volume to one-third of the size of a conventional loudspeaker with the same sound capacity. The principle is called Active Loudspeakers, and what you get is a compact loudspeaker that can play at high volume without distortion or damage to its drive units. BeoLab 2000 Specifications Dimensions W x H x D/Weight: 40 x 28.5 x 15.8 cm / 6 kg (on wall) Cabinet finish Aluminium / black plastic Power Consumption:Typical 12 wattsStand-by < 1.8 watts Power amplifier modules 4 units Long-term maximum output power per module* 41 W Effective frequency range* 61 - 20,000 Hz Cabinet principle Bass Reflex Magnetic shielded No Woofer 10 cm Tweeter 2.5 cm Net volume 1.3 litres Connections: Master Link (ML) 1 Link compatibility: Master Link - Built in ICE power Amplifiers. Additional Information: As a former Bang and Olufsen employee of many years I am pleased to bring a selection of B&O New and Used products to the Lake District in Cumbria. I can personally guarantee that all my items are genuine and in great condition. Please do not hesitate to ask me any questions, regarding my items or if you would like any more info or photos. All payment methods accepted: What I expect from you: Good honest ebayers, no time wasters please. What you can expect from me: Honest reliable descriptions and pictures. - Immediate dispatch once the winning bid has been confirmed. - Each item packaged safely & securely. - Quick response to any questions or queries regarding any of my items. - A choice of either insurance or recorded delivery on expensive items. - Prompt in leaving honest and fair feedback.

BEOLAB 2000FONCTIONNE TRES BIEN!!!

AUX 3.5mm Jack Plug to BeoLab 2000 MasterLink Cable(B&O Remote Control Required for Control i.e. Beo4/BeoLink 1000)(Length: 0.5 Metre - Two-Section Cable)No Reserve Price Finally, a brilliant cable solution to allow you to connect a device to your BeoLab 2000 We are pleased to bring to market this new range of BeoLab 2000 AUX cables. The long awaited cable solution will allow you to connect any device with a 3.5mm headphones/audio OUT connection. Typical examples include, iPad, iPhone, iPod, Android device, TV, computer etc etc. The cable, which consists of two sections (see photographs) connects to the device at one end and the MasterLink plug to the BeoLab 2000, at the other. You will require a B&O remote control, such as a BeoLink 1000 or Beo4, to setup the BeoLab 2000 in to AUX mode. Having setup, you may also wish to control volume level, switch on and off/standby using the remote, although control can be achieved using the hands-on control to BeoLab 2000. The setup process is only made once and does not need to be exercised each and every time you switch on BeoLab 2000. The only time you will need to re-programme is if you have a power cut. This solution allows for complete stand-alone use of the BeoLab 2000 as a loudspeaker. You do not need any other product/a connection to a main B&O setup in order to use in this setup (other than your connected device, of course - iPad etc.). Available in a range of different lengths and also in black or white - Ideal should you have your BeoLab 2000 wall mounted and you need a longer cable.We also have different source connection types available, such as RCA plugs. Available from our eBay store as a different item and also as buy it now. An Instruction set is included with your purchase for programming BeoLab 2000. Payment and Delivery Preferred payment by PayPal, cheque, bank transfer or cash on collection. FAST & FREE STANDARD UK DELIVERY Please click HERE to go to our eBay store home page Custom lengths of cables are available - Please contact us for a quote... Colour: WhiteTotal Length: 0.5 Metre (MasterLink Plug Cable Section Approx. 0.25 Metre) FAST & FREE STANDARD UK DELIVERY Happy Bidding & Good Luck...

Bang & Olufsen Beolab 2000 compact & powerful stereo link speaker type 1642 This Beolab 2000 speaker is in very good used condition with no obvious marks or scratches.It has been fully tested & it is in perfect working order. Comes with only power cable Add it to your existing B&O system to extend your system to another room via a Masterlink cable (not included). The Beolab 2000 active loudspeaker is a ideal loudspeaker for almost any space and with superb sound quality that far surpasses it size. It’s sleek aluminium design is simply stunning with it’s featured control bar inviting you to play.

AUX 3.5mm Jack Plug to BeoLab 2000 MasterLink Cable(B&O Remote Control Required for Control i.e. Beo4/BeoLink 1000)(Length: 0.5 Metre - Two-Section Cable)No Reserve Price Finally, a brilliant cable solution to allow you to connect a device to your BeoLab 2000 We are pleased to bring to market this new range of BeoLab 2000 AUX cables. The long awaited cable solution will allow you to connect any device with a 3.5mm headphones/audio OUT connection. Typical examples include, iPad, iPhone, iPod, Android device, TV, computer etc etc. The cable, which consists of two sections (see photographs) connects to the device at one end and the MasterLink plug to the BeoLab 2000, at the other. You will require a B&O remote control, such as a BeoLink 1000 or Beo4, to setup the BeoLab 2000 in to AUX mode. Having setup, you may also wish to control volume level, switch on and off/standby using the remote, although control can be achieved using the hands-on control to BeoLab 2000. The setup process is only made once and does not need to be exercised each and every time you switch on BeoLab 2000. The only time you will need to re-programme is if you have a power cut. This solution allows for complete stand-alone use of the BeoLab 2000 as a loudspeaker. You do not need any other product/a connection to a main B&O setup in order to use in this setup (other than your connected device, of course - iPad etc.). Available in a range of different lengths and also in black or white - Ideal should you have your BeoLab 2000 wall mounted and you need a longer cable.We also have different source connection types available, such as RCA plugs. Available from our eBay store as a different item and also as buy it now. An Instruction set is included with your purchase for programming BeoLab 2000. Payment and Delivery Preferred payment by PayPal, cheque, bank transfer or cash on collection. FAST & FREE STANDARD UK DELIVERY Please click HERE to go to our eBay store home page Custom lengths of cables are available - Please contact us for a quote... Colour: WhiteTotal Length: 0.5 Metre (MasterLink Plug Cable Section Approx. 0.25 Metre) FAST & FREE STANDARD UK DELIVERY Happy Bidding & Good Luck...

AUX 3.5mm Jack Plug to BeoLab 2000 MasterLink Cable(B&O Remote Control Required for Control i.e. Beo4/BeoLink 1000)(Length: 0.5 Metre - Two-Section Cable)No Reserve Price Finally, a brilliant cable solution to allow you to connect a device to your BeoLab 2000 We are pleased to bring to market this new range of BeoLab 2000 AUX cables. The long awaited cable solution will allow you to connect any device with a 3.5mm headphones/audio OUT connection. Typical examples include, iPad, iPhone, iPod, Android device, TV, computer etc etc. The cable, which consists of two sections (see photographs) connects to the device at one end and the MasterLink plug to the BeoLab 2000, at the other. You will require a B&O remote control, such as a BeoLink 1000 or Beo4, to setup the BeoLab 2000 in to AUX mode. Having setup, you may also wish to control volume level, switch on and off/standby using the remote, although control can be achieved using the hands-on control to BeoLab 2000. The setup process is only made once and does not need to be exercised each and every time you switch on BeoLab 2000. The only time you will need to re-programme is if you have a power cut. This solution allows for complete stand-alone use of the BeoLab 2000 as a loudspeaker. You do not need any other product/a connection to a main B&O setup in order to use in this setup (other than your connected device, of course - iPad etc.). Available in a range of different lengths and also in black or white - Ideal should you have your BeoLab 2000 wall mounted and you need a longer cable.We also have different source connection types available, such as RCA plugs. Available from our eBay store as a different item and also as buy it now. An Instruction set is included with your purchase for programming BeoLab 2000. Payment and Delivery Preferred payment by PayPal, cheque, bank transfer or cash on collection. FAST & FREE STANDARD UK DELIVERY Please click HERE to go to our eBay store home page Custom lengths of cables are available - Please contact us for a quote... Colour: WhiteTotal Length: 0.5 Metre (MasterLink Plug Cable Section Approx. 0.25 Metre) FAST & FREE STANDARD UK DELIVERY Happy Bidding & Good Luck...

AUX 3.5mm Jack Plug to BeoLab 2000 MasterLink Cable(B&O Remote Control Required for Control i.e. Beo4/BeoLink 1000)(Length: 0.5 Metre - Two-Section Cable)No Reserve Price Finally, a brilliant cable solution to allow you to connect a device to your BeoLab 2000 We are pleased to bring to market this new range of BeoLab 2000 AUX cables. The long awaited cable solution will allow you to connect any device with a 3.5mm headphones/audio OUT connection. Typical examples include, iPad, iPhone, iPod, Android device, TV, computer etc etc. The cable, which consists of two sections (see photographs) connects to the device at one end and the MasterLink plug to the BeoLab 2000, at the other. You will require a B&O remote control, such as a BeoLink 1000 or Beo4, to setup the BeoLab 2000 in to AUX mode. Having setup, you may also wish to control volume level, switch on and off/standby using the remote, although control can be achieved using the hands-on control to BeoLab 2000. The setup process is only made once and does not need to be exercised each and every time you switch on BeoLab 2000. The only time you will need to re-programme is if you have a power cut. This solution allows for complete stand-alone use of the BeoLab 2000 as a loudspeaker. You do not need any other product/a connection to a main B&O setup in order to use in this setup (other than your connected device, of course - iPad etc.). Available in a range of different lengths and also in black or white - Ideal should you have your BeoLab 2000 wall mounted and you need a longer cable.We also have different source connection types available, such as RCA plugs. Available from our eBay store as a different item and also as buy it now. An Instruction set is included with your purchase for programming BeoLab 2000. Payment and Delivery Preferred payment by PayPal, cheque, bank transfer or cash on collection. FAST & FREE STANDARD UK DELIVERY Please click HERE to go to our eBay store home page Custom lengths of cables are available - Please contact us for a quote... Colour: WhiteTotal Length: 0.5 Metre (MasterLink Plug Cable Section Approx. 0.25 Metre) FAST & FREE STANDARD UK DELIVERY Happy Bidding & Good Luck...

AUX 3.5mm Jack Plug to BeoLab 2000 MasterLink Cable(B&O Remote Control Required for Control i.e. Beo4/BeoLink 1000)(Length: 0.5 Metre - Two-Section Cable)No Reserve Price Finally, a brilliant cable solution to allow you to connect a device to your BeoLab 2000 We are pleased to bring to market this new range of BeoLab 2000 AUX cables. The long awaited cable solution will allow you to connect any device with a 3.5mm headphones/audio OUT connection. Typical examples include, iPad, iPhone, iPod, Android device, TV, computer etc etc. The cable, which consists of two sections (see photographs) connects to the device at one end and the MasterLink plug to the BeoLab 2000, at the other. You will require a B&O remote control, such as a BeoLink 1000 or Beo4, to setup the BeoLab 2000 in to AUX mode. Having setup, you may also wish to control volume level, switch on and off/standby using the remote, although control can be achieved using the hands-on control to BeoLab 2000. The setup process is only made once and does not need to be exercised each and every time you switch on BeoLab 2000. The only time you will need to re-programme is if you have a power cut. This solution allows for complete stand-alone use of the BeoLab 2000 as a loudspeaker. You do not need any other product/a connection to a main B&O setup in order to use in this setup (other than your connected device, of course - iPad etc.). Available in a range of different lengths and also in black or white - Ideal should you have your BeoLab 2000 wall mounted and you need a longer cable.We also have different source connection types available, such as RCA plugs. Available from our eBay store as a different item and also as buy it now. An Instruction set is included with your purchase for programming BeoLab 2000. Payment and Delivery Preferred payment by PayPal, cheque, bank transfer or cash on collection. FAST & FREE STANDARD UK DELIVERY Please click HERE to go to our eBay store home page Custom lengths of cables are available - Please contact us for a quote... Colour: WhiteTotal Length: 0.5 Metre (MasterLink Plug Cable Section Approx. 0.25 Metre) FAST & FREE STANDARD UK DELIVERY Happy Bidding & Good Luck...

AUX 3.5mm Jack Plug to BeoLab 2000 MasterLink Cable(B&O Remote Control Required for Control i.e. Beo4/BeoLink 1000)(Length: 0.5 Metre - Two-Section Cable)No Reserve Price Finally, a brilliant cable solution to allow you to connect a device to your BeoLab 2000 We are pleased to bring to market this new range of BeoLab 2000 AUX cables. The long awaited cable solution will allow you to connect any device with a 3.5mm headphones/audio OUT connection. Typical examples include, iPad, iPhone, iPod, Android device, TV, computer etc etc. The cable, which consists of two sections (see photographs) connects to the device at one end and the MasterLink plug to the BeoLab 2000, at the other. You will require a B&O remote control, such as a BeoLink 1000 or Beo4, to setup the BeoLab 2000 in to AUX mode. Having setup, you may also wish to control volume level, switch on and off/standby using the remote, although control can be achieved using the hands-on control to BeoLab 2000. The setup process is only made once and does not need to be exercised each and every time you switch on BeoLab 2000. The only time you will need to re-programme is if you have a power cut. This solution allows for complete stand-alone use of the BeoLab 2000 as a loudspeaker. You do not need any other product/a connection to a main B&O setup in order to use in this setup (other than your connected device, of course - iPad etc.). Available in a range of different lengths and also in black or white - Ideal should you have your BeoLab 2000 wall mounted and you need a longer cable.We also have different source connection types available, such as RCA plugs. Available from our eBay store as a different item and also as buy it now. An Instruction set is included with your purchase for programming BeoLab 2000. Payment and Delivery Preferred payment by PayPal, cheque, bank transfer or cash on collection. FAST & FREE STANDARD UK DELIVERY Please click HERE to go to our eBay store home page Custom lengths of cables are available - Please contact us for a quote... Colour: WhiteTotal Length: 0.5 Metre (MasterLink Plug Cable Section Approx. 0.25 Metre) FAST & FREE STANDARD UK DELIVERY Happy Bidding & Good Luck...

AUX 3.5mm Jack Plug to BeoLab 2000 MasterLink Cable(B&O Remote Control Required for Control i.e. Beo4/BeoLink 1000)(Length: 0.5 Metre - Two-Section Cable)No Reserve Price Finally, a brilliant cable solution to allow you to connect a device to your BeoLab 2000 We are pleased to bring to market this new range of BeoLab 2000 AUX cables. The long awaited cable solution will allow you to connect any device with a 3.5mm headphones/audio OUT connection. Typical examples include, iPad, iPhone, iPod, Android device, TV, computer etc etc. The cable, which consists of two sections (see photographs) connects to the device at one end and the MasterLink plug to the BeoLab 2000, at the other. You will require a B&O remote control, such as a BeoLink 1000 or Beo4, to setup the BeoLab 2000 in to AUX mode. Having setup, you may also wish to control volume level, switch on and off/standby using the remote, although control can be achieved using the hands-on control to BeoLab 2000. The setup process is only made once and does not need to be exercised each and every time you switch on BeoLab 2000. The only time you will need to re-programme is if you have a power cut. This solution allows for complete stand-alone use of the BeoLab 2000 as a loudspeaker. You do not need any other product/a connection to a main B&O setup in order to use in this setup (other than your connected device, of course - iPad etc.). Available in a range of different lengths and also in black or white - Ideal should you have your BeoLab 2000 wall mounted and you need a longer cable.We also have different source connection types available, such as RCA plugs. Available from our eBay store as a different item and also as buy it now. An Instruction set is included with your purchase for programming BeoLab 2000. Payment and Delivery Preferred payment by PayPal, cheque, bank transfer or cash on collection. FAST & FREE STANDARD UK DELIVERY Please click HERE to go to our eBay store home page Custom lengths of cables are available - Please contact us for a quote... Colour: WhiteTotal Length: 0.5 Metre (MasterLink Plug Cable Section Approx. 0.25 Metre) FAST & FREE STANDARD UK DELIVERY Happy Bidding & Good Luck...

AUX 3.5mm Jack Plug to BeoLab 2000 MasterLink Cable(B&O Remote Control Required for Control i.e. Beo4/BeoLink 1000)(Length: 0.5 Metre - Two-Section Cable)No Reserve Price Finally, a brilliant cable solution to allow you to connect a device to your BeoLab 2000 We are pleased to bring to market this new range of BeoLab 2000 AUX cables. The long awaited cable solution will allow you to connect any device with a 3.5mm headphones/audio OUT connection. Typical examples include, iPad, iPhone, iPod, Android device, TV, computer etc etc. The cable, which consists of two sections (see photographs) connects to the device at one end and the MasterLink plug to the BeoLab 2000, at the other. You will require a B&O remote control, such as a BeoLink 1000 or Beo4, to setup the BeoLab 2000 in to AUX mode. Having setup, you may also wish to control volume level, switch on and off/standby using the remote, although control can be achieved using the hands-on control to BeoLab 2000. The setup process is only made once and does not need to be exercised each and every time you switch on BeoLab 2000. The only time you will need to re-programme is if you have a power cut. This solution allows for complete stand-alone use of the BeoLab 2000 as a loudspeaker. You do not need any other product/a connection to a main B&O setup in order to use in this setup (other than your connected device, of course - iPad etc.). Available in a range of different lengths and also in black or white - Ideal should you have your BeoLab 2000 wall mounted and you need a longer cable.We also have different source connection types available, such as RCA plugs. Available from our eBay store as a different item and also as buy it now. An Instruction set is included with your purchase for programming BeoLab 2000. Payment and Delivery Preferred payment by PayPal, cheque, bank transfer or cash on collection. FAST & FREE STANDARD UK DELIVERY Please click HERE to go to our eBay store home page Custom lengths of cables are available - Please contact us for a quote... Colour: WhiteTotal Length: 0.5 Metre (MasterLink Plug Cable Section Approx. 0.25 Metre) FAST & FREE STANDARD UK DELIVERY Happy Bidding & Good Luck...

AUX 3.5mm Jack Plug to BeoLab 2000 MasterLink Cable(B&O Remote Control Required for Control i.e. Beo4/BeoLink 1000)(Length: 0.5 Metre - Two-Section Cable)No Reserve Price Finally, a brilliant cable solution to allow you to connect a device to your BeoLab 2000 We are pleased to bring to market this new range of BeoLab 2000 AUX cables. The long awaited cable solution will allow you to connect any device with a 3.5mm headphones/audio OUT connection. Typical examples include, iPad, iPhone, iPod, Android device, TV, computer etc etc. The cable, which consists of two sections (see photographs) connects to the device at one end and the MasterLink plug to the BeoLab 2000, at the other. You will require a B&O remote control, such as a BeoLink 1000 or Beo4, to setup the BeoLab 2000 in to AUX mode. Having setup, you may also wish to control volume level, switch on and off/standby using the remote, although control can be achieved using the hands-on control to BeoLab 2000. The setup process is only made once and does not need to be exercised each and every time you switch on BeoLab 2000. The only time you will need to re-programme is if you have a power cut. This solution allows for complete stand-alone use of the BeoLab 2000 as a loudspeaker. You do not need any other product/a connection to a main B&O setup in order to use in this setup (other than your connected device, of course - iPad etc.). Available in a range of different lengths and also in black or white - Ideal should you have your BeoLab 2000 wall mounted and you need a longer cable.We also have different source connection types available, such as RCA plugs. Available from our eBay store as a different item and also as buy it now. An Instruction set is included with your purchase for programming BeoLab 2000. Payment and Delivery Preferred payment by PayPal, cheque, bank transfer or cash on collection. FAST & FREE STANDARD UK DELIVERY Please click HERE to go to our eBay store home page Custom lengths of cables are available - Please contact us for a quote... Colour: WhiteTotal Length: 0.5 Metre (MasterLink Plug Cable Section Approx. 0.25 Metre) FAST & FREE STANDARD UK DELIVERY Happy Bidding & Good Luck...

AUX 3.5mm Jack Plug to BeoLab 2000 MasterLink Cable(B&O Remote Control Required for Control i.e. Beo4/BeoLink 1000)(Length: 0.5 Metre - Two-Section Cable)No Reserve Price Finally, a brilliant cable solution to allow you to connect a device to your BeoLab 2000 We are pleased to bring to market this new range of BeoLab 2000 AUX cables. The long awaited cable solution will allow you to connect any device with a 3.5mm headphones/audio OUT connection. Typical examples include, iPad, iPhone, iPod, Android device, TV, computer etc etc. The cable, which consists of two sections (see photographs) connects to the device at one end and the MasterLink plug to the BeoLab 2000, at the other. You will require a B&O remote control, such as a BeoLink 1000 or Beo4, to setup the BeoLab 2000 in to AUX mode. Having setup, you may also wish to control volume level, switch on and off/standby using the remote, although control can be achieved using the hands-on control to BeoLab 2000. The setup process is only made once and does not need to be exercised each and every time you switch on BeoLab 2000. The only time you will need to re-programme is if you have a power cut. This solution allows for complete stand-alone use of the BeoLab 2000 as a loudspeaker. You do not need any other product/a connection to a main B&O setup in order to use in this setup (other than your connected device, of course - iPad etc.). Available in a range of different lengths and also in black or white - Ideal should you have your BeoLab 2000 wall mounted and you need a longer cable.We also have different source connection types available, such as RCA plugs. Available from our eBay store as a different item and also as buy it now. An Instruction set is included with your purchase for programming BeoLab 2000. Payment and Delivery Preferred payment by PayPal, cheque, bank transfer or cash on collection. FAST & FREE STANDARD UK DELIVERY Please click HERE to go to our eBay store home page Custom lengths of cables are available - Please contact us for a quote... Colour: WhiteTotal Length: 0.5 Metre (MasterLink Plug Cable Section Approx. 0.25 Metre) FAST & FREE STANDARD UK DELIVERY Happy Bidding & Good Luck...

AUX 3.5mm Jack Plug to BeoLab 2000 MasterLink Cable(B&O Remote Control Required for Control i.e. Beo4/BeoLink 1000)(Length: 0.5 Metre - Two-Section Cable)No Reserve Price Finally, a brilliant cable solution to allow you to connect a device to your BeoLab 2000 We are pleased to bring to market this new range of BeoLab 2000 AUX cables. The long awaited cable solution will allow you to connect any device with a 3.5mm headphones/audio OUT connection. Typical examples include, iPad, iPhone, iPod, Android device, TV, computer etc etc. The cable, which consists of two sections (see photographs) connects to the device at one end and the MasterLink plug to the BeoLab 2000, at the other. You will require a B&O remote control, such as a BeoLink 1000 or Beo4, to setup the BeoLab 2000 in to AUX mode. Having setup, you may also wish to control volume level, switch on and off/standby using the remote, although control can be achieved using the hands-on control to BeoLab 2000. The setup process is only made once and does not need to be exercised each and every time you switch on BeoLab 2000. The only time you will need to re-programme is if you have a power cut. This solution allows for complete stand-alone use of the BeoLab 2000 as a loudspeaker. You do not need any other product/a connection to a main B&O setup in order to use in this setup (other than your connected device, of course - iPad etc.). Available in a range of different lengths and also in black or white - Ideal should you have your BeoLab 2000 wall mounted and you need a longer cable.We also have different source connection types available, such as RCA plugs. Available from our eBay store as a different item and also as buy it now. An Instruction set is included with your purchase for programming BeoLab 2000. Payment and Delivery Preferred payment by PayPal, cheque, bank transfer or cash on collection. FAST & FREE STANDARD UK DELIVERY Please click HERE to go to our eBay store home page Custom lengths of cables are available - Please contact us for a quote... Colour: WhiteTotal Length: 0.5 Metre (MasterLink Plug Cable Section Approx. 0.25 Metre) FAST & FREE STANDARD UK DELIVERY Happy Bidding & Good Luck...

AUX 3.5mm Jack Plug to BeoLab 2000 MasterLink Cable(B&O Remote Control Required for Control i.e. Beo4/BeoLink 1000)(Length: 0.5 Metre - Two-Section Cable)No Reserve Price Finally, a brilliant cable solution to allow you to connect a device to your BeoLab 2000 We are pleased to bring to market this new range of BeoLab 2000 AUX cables. The long awaited cable solution will allow you to connect any device with a 3.5mm headphones/audio OUT connection. Typical examples include, iPad, iPhone, iPod, Android device, TV, computer etc etc. The cable, which consists of two sections (see photographs) connects to the device at one end and the MasterLink plug to the BeoLab 2000, at the other. You will require a B&O remote control, such as a BeoLink 1000 or Beo4, to setup the BeoLab 2000 in to AUX mode. Having setup, you may also wish to control volume level, switch on and off/standby using the remote, although control can be achieved using the hands-on control to BeoLab 2000. The setup process is only made once and does not need to be exercised each and every time you switch on BeoLab 2000. The only time you will need to re-programme is if you have a power cut. This solution allows for complete stand-alone use of the BeoLab 2000 as a loudspeaker. You do not need any other product/a connection to a main B&O setup in order to use in this setup (other than your connected device, of course - iPad etc.). Available in a range of different lengths and also in black or white - Ideal should you have your BeoLab 2000 wall mounted and you need a longer cable.We also have different source connection types available, such as RCA plugs. Available from our eBay store as a different item and also as buy it now. An Instruction set is included with your purchase for programming BeoLab 2000. Payment and Delivery Preferred payment by PayPal, cheque, bank transfer or cash on collection. FAST & FREE STANDARD UK DELIVERY Please click HERE to go to our eBay store home page Custom lengths of cables are available - Please contact us for a quote... Colour: WhiteTotal Length: 0.5 Metre (MasterLink Plug Cable Section Approx. 0.25 Metre) FAST & FREE STANDARD UK DELIVERY Happy Bidding & Good Luck...

AUX 3.5mm Jack Plug to BeoLab 2000 MasterLink Cable(B&O Remote Control Required for Control i.e. Beo4/BeoLink 1000)(Length: 0.5 Metre - Two-Section Cable)No Reserve Price Finally, a brilliant cable solution to allow you to connect a device to your BeoLab 2000 We are pleased to bring to market this new range of BeoLab 2000 AUX cables. The long awaited cable solution will allow you to connect any device with a 3.5mm headphones/audio OUT connection. Typical examples include, iPad, iPhone, iPod, Android device, TV, computer etc etc. The cable, which consists of two sections (see photographs) connects to the device at one end and the MasterLink plug to the BeoLab 2000, at the other. You will require a B&O remote control, such as a BeoLink 1000 or Beo4, to setup the BeoLab 2000 in to AUX mode. Having setup, you may also wish to control volume level, switch on and off/standby using the remote, although control can be achieved using the hands-on control to BeoLab 2000. The setup process is only made once and does not need to be exercised each and every time you switch on BeoLab 2000. The only time you will need to re-programme is if you have a power cut. This solution allows for complete stand-alone use of the BeoLab 2000 as a loudspeaker. You do not need any other product/a connection to a main B&O setup in order to use in this setup (other than your connected device, of course - iPad etc.). Available in a range of different lengths and also in black or white - Ideal should you have your BeoLab 2000 wall mounted and you need a longer cable.We also have different source connection types available, such as RCA plugs. Available from our eBay store as a different item and also as buy it now. An Instruction set is included with your purchase for programming BeoLab 2000. Payment and Delivery Preferred payment by PayPal, cheque, bank transfer or cash on collection. FAST & FREE STANDARD UK DELIVERY Please click HERE to go to our eBay store home page Custom lengths of cables are available - Please contact us for a quote... Colour: WhiteTotal Length: 0.5 Metre (MasterLink Plug Cable Section Approx. 0.25 Metre) FAST & FREE STANDARD UK DELIVERY Happy Bidding & Good Luck...

AUX 3.5mm Jack Plug to BeoLab 2000 MasterLink Cable(B&O Remote Control Required for Control i.e. Beo4/BeoLink 1000)(Length: 0.5 Metre - Two-Section Cable)No Reserve Price Finally, a brilliant cable solution to allow you to connect a device to your BeoLab 2000 We are pleased to bring to market this new range of BeoLab 2000 AUX cables. The long awaited cable solution will allow you to connect any device with a 3.5mm headphones/audio OUT connection. Typical examples include, iPad, iPhone, iPod, Android device, TV, computer etc etc. The cable, which consists of two sections (see photographs) connects to the device at one end and the MasterLink plug to the BeoLab 2000, at the other. You will require a B&O remote control, such as a BeoLink 1000 or Beo4, to setup the BeoLab 2000 in to AUX mode. Having setup, you may also wish to control volume level, switch on and off/standby using the remote, although control can be achieved using the hands-on control to BeoLab 2000. The setup process is only made once and does not need to be exercised each and every time you switch on BeoLab 2000. The only time you will need to re-programme is if you have a power cut. This solution allows for complete stand-alone use of the BeoLab 2000 as a loudspeaker. You do not need any other product/a connection to a main B&O setup in order to use in this setup (other than your connected device, of course - iPad etc.). Available in a range of different lengths and also in black or white - Ideal should you have your BeoLab 2000 wall mounted and you need a longer cable.We also have different source connection types available, such as RCA plugs. Available from our eBay store as a different item and also as buy it now. An Instruction set is included with your purchase for programming BeoLab 2000. Payment and Delivery Preferred payment by PayPal, cheque, bank transfer or cash on collection. FAST & FREE STANDARD UK DELIVERY Please click HERE to go to our eBay store home page Custom lengths of cables are available - Please contact us for a quote... Colour: WhiteTotal Length: 0.5 Metre (MasterLink Plug Cable Section Approx. 0.25 Metre) FAST & FREE STANDARD UK DELIVERY Happy Bidding & Good Luck...

Bang & Olufsen B&o Beolab 2000 Noir Haut-ParleurCette fiche produit a été automatiquement traduite. Si vous avez des questions, n’hésitez pas à nous contacter. Nous vendons une enceinte active Bang & Olufsen B&O Beolab 2000 Black. Techniquement, bien sûr, entièrement fonctionnel Visuellement en parfait état Dun foyer sans nicotine Dès 1 possession étendue de la livraison - Beolab 2000 - Fiche dalimentation Nous vendons une enceinte active Bang & Olufsen B&O Beolab 2000 Black. Techniquement, bien sûr, entièrement fonctionnel Visuellement en parfait état Dun foyer sans nicotine Dès 1 possession étendue de la livraison - Beolab 2000 - Fiche dalimentation Nous vendons une enceinte active Bang & Olufsen B&O Beolab 2000 Black. Techniquement, bien sûr, entièrement fonctionnel Visuellement en parfait état Dun foyer sans nicotine Dès 1 possession étendue de la livraison - Beolab 2000 - Fiche dalimentation Marke Bang & Olufsen Angebotspaket Nein EAN nichtzutreffend Farbe Schwarz Besonderheiten Masterlinkanschluss Modell Beolab 2000 Aktiv Lautsprecher Herstellernummer nicht zutreffend Konnektivität Verkabelt Herstellungsland und -region Dänemark Herstellergarantie Keine Produktart Aktiv Lautsprecher