AUX 3.5mm Jack Plug to BeoLab 2000 MasterLink Cable(B&O Remote Control Required for Control i.e. Beo4/BeoLink 1000)(Length: 0.5 Metre - Two-Section Cable)No Reserve Price Finally, a brilliant cable solution to allow you to connect a device to your BeoLab 2000 We are pleased to bring to market this new range of BeoLab 2000 AUX cables. The long awaited cable solution will allow you to connect any device with a 3.5mm headphones/audio OUT connection. Typical examples include, iPad, iPhone, iPod, Android device, TV, computer etc etc. The cable, which consists of two sections (see photographs) connects to the device at one end and the MasterLink plug to the BeoLab 2000, at the other. You will require a B&O remote control, such as a BeoLink 1000 or Beo4, to setup the BeoLab 2000 in to AUX mode. Having setup, you may also wish to control volume level, switch on and off/standby using the remote, although control can be achieved using the hands-on control to BeoLab 2000. The setup process is only made once and does not need to be exercised each and every time you switch on BeoLab 2000. The only time you will need to re-programme is if you have a power cut. This solution allows for complete stand-alone use of the BeoLab 2000 as a loudspeaker. You do not need any other product/a connection to a main B&O setup in order to use in this setup (other than your connected device, of course - iPad etc.). Available in a range of different lengths and also in black or white - Ideal should you have your BeoLab 2000 wall mounted and you need a longer cable.We also have different source connection types available, such as RCA plugs. Available from our eBay store as a different item and also as buy it now. An Instruction set is included with your purchase for programming BeoLab 2000. Payment and Delivery Preferred payment by PayPal, cheque, bank transfer or cash on collection. FAST & FREE STANDARD UK DELIVERY Please click HERE to go to our eBay store home page Custom lengths of cables are available - Please contact us for a quote... Colour: WhiteTotal Length: 0.5 Metre (MasterLink Plug Cable Section Approx. 0.25 Metre) FAST & FREE STANDARD UK DELIVERY Happy Bidding & Good Luck...

AUX 3.5mm Jack Plug to BeoLab 2000 MasterLink Cable(B&O Remote Control Required for Control i.e. Beo4/BeoLink 1000)(Length: 0.5 Metre - Two-Section Cable)No Reserve Price Finally, a brilliant cable solution to allow you to connect a device to your BeoLab 2000 We are pleased to bring to market this new range of BeoLab 2000 AUX cables. The long awaited cable solution will allow you to connect any device with a 3.5mm headphones/audio OUT connection. Typical examples include, iPad, iPhone, iPod, Android device, TV, computer etc etc. The cable, which consists of two sections (see photographs) connects to the device at one end and the MasterLink plug to the BeoLab 2000, at the other. You will require a B&O remote control, such as a BeoLink 1000 or Beo4, to setup the BeoLab 2000 in to AUX mode. Having setup, you may also wish to control volume level, switch on and off/standby using the remote, although control can be achieved using the hands-on control to BeoLab 2000. The setup process is only made once and does not need to be exercised each and every time you switch on BeoLab 2000. The only time you will need to re-programme is if you have a power cut. This solution allows for complete stand-alone use of the BeoLab 2000 as a loudspeaker. You do not need any other product/a connection to a main B&O setup in order to use in this setup (other than your connected device, of course - iPad etc.). Available in a range of different lengths and also in black or white - Ideal should you have your BeoLab 2000 wall mounted and you need a longer cable.We also have different source connection types available, such as RCA plugs. Available from our eBay store as a different item and also as buy it now. An Instruction set is included with your purchase for programming BeoLab 2000. Payment and Delivery Preferred payment by PayPal, cheque, bank transfer or cash on collection. FAST & FREE STANDARD UK DELIVERY Please click HERE to go to our eBay store home page Custom lengths of cables are available - Please contact us for a quote... Colour: WhiteTotal Length: 0.5 Metre (MasterLink Plug Cable Section Approx. 0.25 Metre) FAST & FREE STANDARD UK DELIVERY Happy Bidding & Good Luck...

AUX 3.5mm Jack Plug to BeoLab 2000 MasterLink Cable(B&O Remote Control Required for Control i.e. Beo4/BeoLink 1000)(Length: 0.5 Metre - Two-Section Cable)No Reserve Price Finally, a brilliant cable solution to allow you to connect a device to your BeoLab 2000 We are pleased to bring to market this new range of BeoLab 2000 AUX cables. The long awaited cable solution will allow you to connect any device with a 3.5mm headphones/audio OUT connection. Typical examples include, iPad, iPhone, iPod, Android device, TV, computer etc etc. The cable, which consists of two sections (see photographs) connects to the device at one end and the MasterLink plug to the BeoLab 2000, at the other. You will require a B&O remote control, such as a BeoLink 1000 or Beo4, to setup the BeoLab 2000 in to AUX mode. Having setup, you may also wish to control volume level, switch on and off/standby using the remote, although control can be achieved using the hands-on control to BeoLab 2000. The setup process is only made once and does not need to be exercised each and every time you switch on BeoLab 2000. The only time you will need to re-programme is if you have a power cut. This solution allows for complete stand-alone use of the BeoLab 2000 as a loudspeaker. You do not need any other product/a connection to a main B&O setup in order to use in this setup (other than your connected device, of course - iPad etc.). Available in a range of different lengths and also in black or white - Ideal should you have your BeoLab 2000 wall mounted and you need a longer cable.We also have different source connection types available, such as RCA plugs. Available from our eBay store as a different item and also as buy it now. An Instruction set is included with your purchase for programming BeoLab 2000. Payment and Delivery Preferred payment by PayPal, cheque, bank transfer or cash on collection. FAST & FREE STANDARD UK DELIVERY Please click HERE to go to our eBay store home page Custom lengths of cables are available - Please contact us for a quote... Colour: WhiteTotal Length: 0.5 Metre (MasterLink Plug Cable Section Approx. 0.25 Metre) FAST & FREE STANDARD UK DELIVERY Happy Bidding & Good Luck...

AUX 3.5mm Jack Plug to BeoLab 2000 MasterLink Cable(B&O Remote Control Required for Control i.e. Beo4/BeoLink 1000)(Length: 0.5 Metre - Two-Section Cable)No Reserve Price Finally, a brilliant cable solution to allow you to connect a device to your BeoLab 2000 We are pleased to bring to market this new range of BeoLab 2000 AUX cables. The long awaited cable solution will allow you to connect any device with a 3.5mm headphones/audio OUT connection. Typical examples include, iPad, iPhone, iPod, Android device, TV, computer etc etc. The cable, which consists of two sections (see photographs) connects to the device at one end and the MasterLink plug to the BeoLab 2000, at the other. You will require a B&O remote control, such as a BeoLink 1000 or Beo4, to setup the BeoLab 2000 in to AUX mode. Having setup, you may also wish to control volume level, switch on and off/standby using the remote, although control can be achieved using the hands-on control to BeoLab 2000. The setup process is only made once and does not need to be exercised each and every time you switch on BeoLab 2000. The only time you will need to re-programme is if you have a power cut. This solution allows for complete stand-alone use of the BeoLab 2000 as a loudspeaker. You do not need any other product/a connection to a main B&O setup in order to use in this setup (other than your connected device, of course - iPad etc.). Available in a range of different lengths and also in black or white - Ideal should you have your BeoLab 2000 wall mounted and you need a longer cable.We also have different source connection types available, such as RCA plugs. Available from our eBay store as a different item and also as buy it now. An Instruction set is included with your purchase for programming BeoLab 2000. Payment and Delivery Preferred payment by PayPal, cheque, bank transfer or cash on collection. FAST & FREE STANDARD UK DELIVERY Please click HERE to go to our eBay store home page Custom lengths of cables are available - Please contact us for a quote... Colour: WhiteTotal Length: 0.5 Metre (MasterLink Plug Cable Section Approx. 0.25 Metre) FAST & FREE STANDARD UK DELIVERY Happy Bidding & Good Luck...

AUX 3.5mm Jack Plug to BeoLab 2000 MasterLink Cable(B&O Remote Control Required for Control i.e. Beo4/BeoLink 1000)(Length: 0.5 Metre - Two-Section Cable)No Reserve Price Finally, a brilliant cable solution to allow you to connect a device to your BeoLab 2000 We are pleased to bring to market this new range of BeoLab 2000 AUX cables. The long awaited cable solution will allow you to connect any device with a 3.5mm headphones/audio OUT connection. Typical examples include, iPad, iPhone, iPod, Android device, TV, computer etc etc. The cable, which consists of two sections (see photographs) connects to the device at one end and the MasterLink plug to the BeoLab 2000, at the other. You will require a B&O remote control, such as a BeoLink 1000 or Beo4, to setup the BeoLab 2000 in to AUX mode. Having setup, you may also wish to control volume level, switch on and off/standby using the remote, although control can be achieved using the hands-on control to BeoLab 2000. The setup process is only made once and does not need to be exercised each and every time you switch on BeoLab 2000. The only time you will need to re-programme is if you have a power cut. This solution allows for complete stand-alone use of the BeoLab 2000 as a loudspeaker. You do not need any other product/a connection to a main B&O setup in order to use in this setup (other than your connected device, of course - iPad etc.). Available in a range of different lengths and also in black or white - Ideal should you have your BeoLab 2000 wall mounted and you need a longer cable.We also have different source connection types available, such as RCA plugs. Available from our eBay store as a different item and also as buy it now. An Instruction set is included with your purchase for programming BeoLab 2000. Payment and Delivery Preferred payment by PayPal, cheque, bank transfer or cash on collection. FAST & FREE STANDARD UK DELIVERY Please click HERE to go to our eBay store home page Custom lengths of cables are available - Please contact us for a quote... Colour: WhiteTotal Length: 0.5 Metre (MasterLink Plug Cable Section Approx. 0.25 Metre) FAST & FREE STANDARD UK DELIVERY Happy Bidding & Good Luck...

AUX 3.5mm Jack Plug to BeoLab 2000 MasterLink Cable(B&O Remote Control Required for Control i.e. Beo4/BeoLink 1000)(Length: 0.5 Metre - Two-Section Cable)No Reserve Price Finally, a brilliant cable solution to allow you to connect a device to your BeoLab 2000 We are pleased to bring to market this new range of BeoLab 2000 AUX cables. The long awaited cable solution will allow you to connect any device with a 3.5mm headphones/audio OUT connection. Typical examples include, iPad, iPhone, iPod, Android device, TV, computer etc etc. The cable, which consists of two sections (see photographs) connects to the device at one end and the MasterLink plug to the BeoLab 2000, at the other. You will require a B&O remote control, such as a BeoLink 1000 or Beo4, to setup the BeoLab 2000 in to AUX mode. Having setup, you may also wish to control volume level, switch on and off/standby using the remote, although control can be achieved using the hands-on control to BeoLab 2000. The setup process is only made once and does not need to be exercised each and every time you switch on BeoLab 2000. The only time you will need to re-programme is if you have a power cut. This solution allows for complete stand-alone use of the BeoLab 2000 as a loudspeaker. You do not need any other product/a connection to a main B&O setup in order to use in this setup (other than your connected device, of course - iPad etc.). Available in a range of different lengths and also in black or white - Ideal should you have your BeoLab 2000 wall mounted and you need a longer cable.We also have different source connection types available, such as RCA plugs. Available from our eBay store as a different item and also as buy it now. An Instruction set is included with your purchase for programming BeoLab 2000. Payment and Delivery Preferred payment by PayPal, cheque, bank transfer or cash on collection. FAST & FREE STANDARD UK DELIVERY Please click HERE to go to our eBay store home page Custom lengths of cables are available - Please contact us for a quote... Colour: WhiteTotal Length: 0.5 Metre (MasterLink Plug Cable Section Approx. 0.25 Metre) FAST & FREE STANDARD UK DELIVERY Happy Bidding & Good Luck...

AUX 3.5mm Jack Plug to BeoLab 2000 MasterLink Cable(B&O Remote Control Required for Control i.e. Beo4/BeoLink 1000)(Length: 0.5 Metre - Two-Section Cable)No Reserve Price Finally, a brilliant cable solution to allow you to connect a device to your BeoLab 2000 We are pleased to bring to market this new range of BeoLab 2000 AUX cables. The long awaited cable solution will allow you to connect any device with a 3.5mm headphones/audio OUT connection. Typical examples include, iPad, iPhone, iPod, Android device, TV, computer etc etc. The cable, which consists of two sections (see photographs) connects to the device at one end and the MasterLink plug to the BeoLab 2000, at the other. You will require a B&O remote control, such as a BeoLink 1000 or Beo4, to setup the BeoLab 2000 in to AUX mode. Having setup, you may also wish to control volume level, switch on and off/standby using the remote, although control can be achieved using the hands-on control to BeoLab 2000. The setup process is only made once and does not need to be exercised each and every time you switch on BeoLab 2000. The only time you will need to re-programme is if you have a power cut. This solution allows for complete stand-alone use of the BeoLab 2000 as a loudspeaker. You do not need any other product/a connection to a main B&O setup in order to use in this setup (other than your connected device, of course - iPad etc.). Available in a range of different lengths and also in black or white - Ideal should you have your BeoLab 2000 wall mounted and you need a longer cable.We also have different source connection types available, such as RCA plugs. Available from our eBay store as a different item and also as buy it now. An Instruction set is included with your purchase for programming BeoLab 2000. Payment and Delivery Preferred payment by PayPal, cheque, bank transfer or cash on collection. FAST & FREE STANDARD UK DELIVERY Please click HERE to go to our eBay store home page Custom lengths of cables are available - Please contact us for a quote... Colour: WhiteTotal Length: 0.5 Metre (MasterLink Plug Cable Section Approx. 0.25 Metre) FAST & FREE STANDARD UK DELIVERY Happy Bidding & Good Luck...

AUX 3.5mm Jack Plug to BeoLab 2000 MasterLink Cable(B&O Remote Control Required for Control i.e. Beo4/BeoLink 1000)(Length: 0.5 Metre - Two-Section Cable)No Reserve Price Finally, a brilliant cable solution to allow you to connect a device to your BeoLab 2000 We are pleased to bring to market this new range of BeoLab 2000 AUX cables. The long awaited cable solution will allow you to connect any device with a 3.5mm headphones/audio OUT connection. Typical examples include, iPad, iPhone, iPod, Android device, TV, computer etc etc. The cable, which consists of two sections (see photographs) connects to the device at one end and the MasterLink plug to the BeoLab 2000, at the other. You will require a B&O remote control, such as a BeoLink 1000 or Beo4, to setup the BeoLab 2000 in to AUX mode. Having setup, you may also wish to control volume level, switch on and off/standby using the remote, although control can be achieved using the hands-on control to BeoLab 2000. The setup process is only made once and does not need to be exercised each and every time you switch on BeoLab 2000. The only time you will need to re-programme is if you have a power cut. This solution allows for complete stand-alone use of the BeoLab 2000 as a loudspeaker. You do not need any other product/a connection to a main B&O setup in order to use in this setup (other than your connected device, of course - iPad etc.). Available in a range of different lengths and also in black or white - Ideal should you have your BeoLab 2000 wall mounted and you need a longer cable.We also have different source connection types available, such as RCA plugs. Available from our eBay store as a different item and also as buy it now. An Instruction set is included with your purchase for programming BeoLab 2000. Payment and Delivery Preferred payment by PayPal, cheque, bank transfer or cash on collection. FAST & FREE STANDARD UK DELIVERY Please click HERE to go to our eBay store home page Custom lengths of cables are available - Please contact us for a quote... Colour: WhiteTotal Length: 0.5 Metre (MasterLink Plug Cable Section Approx. 0.25 Metre) FAST & FREE STANDARD UK DELIVERY Happy Bidding & Good Luck...

Bang & Olufsen B&o Beolab 2000 Noir Haut-ParleurCette fiche produit a été automatiquement traduite. Si vous avez des questions, n’hésitez pas à nous contacter. Nous vendons une enceinte active Bang & Olufsen B&O Beolab 2000 Black. Techniquement, bien sûr, entièrement fonctionnel Visuellement en parfait état Dun foyer sans nicotine Dès 1 possession étendue de la livraison - Beolab 2000 - Fiche dalimentation Nous vendons une enceinte active Bang & Olufsen B&O Beolab 2000 Black. Techniquement, bien sûr, entièrement fonctionnel Visuellement en parfait état Dun foyer sans nicotine Dès 1 possession étendue de la livraison - Beolab 2000 - Fiche dalimentation Nous vendons une enceinte active Bang & Olufsen B&O Beolab 2000 Black. Techniquement, bien sûr, entièrement fonctionnel Visuellement en parfait état Dun foyer sans nicotine Dès 1 possession étendue de la livraison - Beolab 2000 - Fiche dalimentation Marke Bang & Olufsen Angebotspaket Nein EAN nichtzutreffend Farbe Schwarz Besonderheiten Masterlinkanschluss Modell Beolab 2000 Aktiv Lautsprecher Herstellernummer nicht zutreffend Konnektivität Verkabelt Herstellungsland und -region Dänemark Herstellergarantie Keine Produktart Aktiv Lautsprecher

AUX 3.5mm Jack Plug to BeoLab 2000 MasterLink Cable(B&O Remote Control Required for Control i.e. Beo4/BeoLink 1000)(Length: 0.5 Metre - Two-Section Cable)No Reserve Price Finally, a brilliant cable solution to allow you to connect a device to your BeoLab 2000 We are pleased to bring to market this new range of BeoLab 2000 AUX cables. The long awaited cable solution will allow you to connect any device with a 3.5mm headphones/audio OUT connection. Typical examples include, iPad, iPhone, iPod, Android device, TV, computer etc etc. The cable, which consists of two sections (see photographs) connects to the device at one end and the MasterLink plug to the BeoLab 2000, at the other. You will require a B&O remote control, such as a BeoLink 1000 or Beo4, to setup the BeoLab 2000 in to AUX mode. Having setup, you may also wish to control volume level, switch on and off/standby using the remote, although control can be achieved using the hands-on control to BeoLab 2000. The setup process is only made once and does not need to be exercised each and every time you switch on BeoLab 2000. The only time you will need to re-programme is if you have a power cut. This solution allows for complete stand-alone use of the BeoLab 2000 as a loudspeaker. You do not need any other product/a connection to a main B&O setup in order to use in this setup (other than your connected device, of course - iPad etc.). Available in a range of different lengths and also in black or white - Ideal should you have your BeoLab 2000 wall mounted and you need a longer cable.We also have different source connection types available, such as RCA plugs. Available from our eBay store as a different item and also as buy it now. An Instruction set is included with your purchase for programming BeoLab 2000. Payment and Delivery Preferred payment by PayPal, cheque, bank transfer or cash on collection. FAST & FREE STANDARD UK DELIVERY Please click HERE to go to our eBay store home page Custom lengths of cables are available - Please contact us for a quote... Colour: WhiteTotal Length: 0.5 Metre (MasterLink Plug Cable Section Approx. 0.25 Metre) FAST & FREE STANDARD UK DELIVERY Happy Bidding & Good Luck...

AUX 3.5mm Jack Plug to BeoLab 2000 MasterLink Cable(B&O Remote Control Required for Control i.e. Beo4/BeoLink 1000)(Length: 0.5 Metre - Two-Section Cable)No Reserve Price Finally, a brilliant cable solution to allow you to connect a device to your BeoLab 2000 We are pleased to bring to market this new range of BeoLab 2000 AUX cables. The long awaited cable solution will allow you to connect any device with a 3.5mm headphones/audio OUT connection. Typical examples include, iPad, iPhone, iPod, Android device, TV, computer etc etc. The cable, which consists of two sections (see photographs) connects to the device at one end and the MasterLink plug to the BeoLab 2000, at the other. You will require a B&O remote control, such as a BeoLink 1000 or Beo4, to setup the BeoLab 2000 in to AUX mode. Having setup, you may also wish to control volume level, switch on and off/standby using the remote, although control can be achieved using the hands-on control to BeoLab 2000. The setup process is only made once and does not need to be exercised each and every time you switch on BeoLab 2000. The only time you will need to re-programme is if you have a power cut. This solution allows for complete stand-alone use of the BeoLab 2000 as a loudspeaker. You do not need any other product/a connection to a main B&O setup in order to use in this setup (other than your connected device, of course - iPad etc.). Available in a range of different lengths and also in black or white - Ideal should you have your BeoLab 2000 wall mounted and you need a longer cable.We also have different source connection types available, such as RCA plugs. Available from our eBay store as a different item and also as buy it now. An Instruction set is included with your purchase for programming BeoLab 2000. Payment and Delivery Preferred payment by PayPal, cheque, bank transfer or cash on collection. FAST & FREE STANDARD UK DELIVERY Please click HERE to go to our eBay store home page Custom lengths of cables are available - Please contact us for a quote... Colour: WhiteTotal Length: 0.5 Metre (MasterLink Plug Cable Section Approx. 0.25 Metre) FAST & FREE STANDARD UK DELIVERY Happy Bidding & Good Luck...

AUX 3.5mm Jack Plug to BeoLab 2000 MasterLink Cable(B&O Remote Control Required for Control i.e. Beo4/BeoLink 1000)(Length: 0.5 Metre - Two-Section Cable)No Reserve Price Finally, a brilliant cable solution to allow you to connect a device to your BeoLab 2000 We are pleased to bring to market this new range of BeoLab 2000 AUX cables. The long awaited cable solution will allow you to connect any device with a 3.5mm headphones/audio OUT connection. Typical examples include, iPad, iPhone, iPod, Android device, TV, computer etc etc. The cable, which consists of two sections (see photographs) connects to the device at one end and the MasterLink plug to the BeoLab 2000, at the other. You will require a B&O remote control, such as a BeoLink 1000 or Beo4, to setup the BeoLab 2000 in to AUX mode. Having setup, you may also wish to control volume level, switch on and off/standby using the remote, although control can be achieved using the hands-on control to BeoLab 2000. The setup process is only made once and does not need to be exercised each and every time you switch on BeoLab 2000. The only time you will need to re-programme is if you have a power cut. This solution allows for complete stand-alone use of the BeoLab 2000 as a loudspeaker. You do not need any other product/a connection to a main B&O setup in order to use in this setup (other than your connected device, of course - iPad etc.). Available in a range of different lengths and also in black or white - Ideal should you have your BeoLab 2000 wall mounted and you need a longer cable.We also have different source connection types available, such as RCA plugs. Available from our eBay store as a different item and also as buy it now. An Instruction set is included with your purchase for programming BeoLab 2000. Payment and Delivery Preferred payment by PayPal, cheque, bank transfer or cash on collection. FAST & FREE STANDARD UK DELIVERY Please click HERE to go to our eBay store home page Custom lengths of cables are available - Please contact us for a quote... Colour: WhiteTotal Length: 0.5 Metre (MasterLink Plug Cable Section Approx. 0.25 Metre) FAST & FREE STANDARD UK DELIVERY Happy Bidding & Good Luck...

AUX 3.5mm Jack Plug to BeoLab 2000 MasterLink Cable(B&O Remote Control Required for Control i.e. Beo4/BeoLink 1000)(Length: 0.5 Metre - Two-Section Cable)No Reserve Price Finally, a brilliant cable solution to allow you to connect a device to your BeoLab 2000 We are pleased to bring to market this new range of BeoLab 2000 AUX cables. The long awaited cable solution will allow you to connect any device with a 3.5mm headphones/audio OUT connection. Typical examples include, iPad, iPhone, iPod, Android device, TV, computer etc etc. The cable, which consists of two sections (see photographs) connects to the device at one end and the MasterLink plug to the BeoLab 2000, at the other. You will require a B&O remote control, such as a BeoLink 1000 or Beo4, to setup the BeoLab 2000 in to AUX mode. Having setup, you may also wish to control volume level, switch on and off/standby using the remote, although control can be achieved using the hands-on control to BeoLab 2000. The setup process is only made once and does not need to be exercised each and every time you switch on BeoLab 2000. The only time you will need to re-programme is if you have a power cut. This solution allows for complete stand-alone use of the BeoLab 2000 as a loudspeaker. You do not need any other product/a connection to a main B&O setup in order to use in this setup (other than your connected device, of course - iPad etc.). Available in a range of different lengths and also in black or white - Ideal should you have your BeoLab 2000 wall mounted and you need a longer cable.We also have different source connection types available, such as RCA plugs. Available from our eBay store as a different item and also as buy it now. An Instruction set is included with your purchase for programming BeoLab 2000. Payment and Delivery Preferred payment by PayPal, cheque, bank transfer or cash on collection. FAST & FREE STANDARD UK DELIVERY Please click HERE to go to our eBay store home page Custom lengths of cables are available - Please contact us for a quote... Colour: WhiteTotal Length: 0.5 Metre (MasterLink Plug Cable Section Approx. 0.25 Metre) FAST & FREE STANDARD UK DELIVERY Happy Bidding & Good Luck...

AUX 3.5mm Jack Plug to BeoLab 2000 MasterLink Cable(B&O Remote Control Required for Control i.e. Beo4/BeoLink 1000)(Length: 0.5 Metre - Two-Section Cable)No Reserve Price Finally, a brilliant cable solution to allow you to connect a device to your BeoLab 2000 We are pleased to bring to market this new range of BeoLab 2000 AUX cables. The long awaited cable solution will allow you to connect any device with a 3.5mm headphones/audio OUT connection. Typical examples include, iPad, iPhone, iPod, Android device, TV, computer etc etc. The cable, which consists of two sections (see photographs) connects to the device at one end and the MasterLink plug to the BeoLab 2000, at the other. You will require a B&O remote control, such as a BeoLink 1000 or Beo4, to setup the BeoLab 2000 in to AUX mode. Having setup, you may also wish to control volume level, switch on and off/standby using the remote, although control can be achieved using the hands-on control to BeoLab 2000. The setup process is only made once and does not need to be exercised each and every time you switch on BeoLab 2000. The only time you will need to re-programme is if you have a power cut. This solution allows for complete stand-alone use of the BeoLab 2000 as a loudspeaker. You do not need any other product/a connection to a main B&O setup in order to use in this setup (other than your connected device, of course - iPad etc.). Available in a range of different lengths and also in black or white - Ideal should you have your BeoLab 2000 wall mounted and you need a longer cable.We also have different source connection types available, such as RCA plugs. Available from our eBay store as a different item and also as buy it now. An Instruction set is included with your purchase for programming BeoLab 2000. Payment and Delivery Preferred payment by PayPal, cheque, bank transfer or cash on collection. FAST & FREE STANDARD UK DELIVERY Please click HERE to go to our eBay store home page Custom lengths of cables are available - Please contact us for a quote... Colour: WhiteTotal Length: 0.5 Metre (MasterLink Plug Cable Section Approx. 0.25 Metre) FAST & FREE STANDARD UK DELIVERY Happy Bidding & Good Luck...

AUX 3.5mm Jack Plug to BeoLab 2000 MasterLink Cable(B&O Remote Control Required for Control i.e. Beo4/BeoLink 1000)(Length: 0.5 Metre - Two-Section Cable)No Reserve Price Finally, a brilliant cable solution to allow you to connect a device to your BeoLab 2000 We are pleased to bring to market this new range of BeoLab 2000 AUX cables. The long awaited cable solution will allow you to connect any device with a 3.5mm headphones/audio OUT connection. Typical examples include, iPad, iPhone, iPod, Android device, TV, computer etc etc. The cable, which consists of two sections (see photographs) connects to the device at one end and the MasterLink plug to the BeoLab 2000, at the other. You will require a B&O remote control, such as a BeoLink 1000 or Beo4, to setup the BeoLab 2000 in to AUX mode. Having setup, you may also wish to control volume level, switch on and off/standby using the remote, although control can be achieved using the hands-on control to BeoLab 2000. The setup process is only made once and does not need to be exercised each and every time you switch on BeoLab 2000. The only time you will need to re-programme is if you have a power cut. This solution allows for complete stand-alone use of the BeoLab 2000 as a loudspeaker. You do not need any other product/a connection to a main B&O setup in order to use in this setup (other than your connected device, of course - iPad etc.). Available in a range of different lengths and also in black or white - Ideal should you have your BeoLab 2000 wall mounted and you need a longer cable.We also have different source connection types available, such as RCA plugs. Available from our eBay store as a different item and also as buy it now. An Instruction set is included with your purchase for programming BeoLab 2000. Payment and Delivery Preferred payment by PayPal, cheque, bank transfer or cash on collection. FAST & FREE STANDARD UK DELIVERY Please click HERE to go to our eBay store home page Custom lengths of cables are available - Please contact us for a quote... Colour: WhiteTotal Length: 0.5 Metre (MasterLink Plug Cable Section Approx. 0.25 Metre) FAST & FREE STANDARD UK DELIVERY Happy Bidding & Good Luck...

AUX 3.5mm Jack Plug to BeoLab 2000 MasterLink Cable(B&O Remote Control Required for Control i.e. Beo4/BeoLink 1000)(Length: 0.5 Metre - Two-Section Cable)No Reserve Price Finally, a brilliant cable solution to allow you to connect a device to your BeoLab 2000 We are pleased to bring to market this new range of BeoLab 2000 AUX cables. The long awaited cable solution will allow you to connect any device with a 3.5mm headphones/audio OUT connection. Typical examples include, iPad, iPhone, iPod, Android device, TV, computer etc etc. The cable, which consists of two sections (see photographs) connects to the device at one end and the MasterLink plug to the BeoLab 2000, at the other. You will require a B&O remote control, such as a BeoLink 1000 or Beo4, to setup the BeoLab 2000 in to AUX mode. Having setup, you may also wish to control volume level, switch on and off/standby using the remote, although control can be achieved using the hands-on control to BeoLab 2000. The setup process is only made once and does not need to be exercised each and every time you switch on BeoLab 2000. The only time you will need to re-programme is if you have a power cut. This solution allows for complete stand-alone use of the BeoLab 2000 as a loudspeaker. You do not need any other product/a connection to a main B&O setup in order to use in this setup (other than your connected device, of course - iPad etc.). Available in a range of different lengths and also in black or white - Ideal should you have your BeoLab 2000 wall mounted and you need a longer cable.We also have different source connection types available, such as RCA plugs. Available from our eBay store as a different item and also as buy it now. An Instruction set is included with your purchase for programming BeoLab 2000. Payment and Delivery Preferred payment by PayPal, cheque, bank transfer or cash on collection. FAST & FREE STANDARD UK DELIVERY Please click HERE to go to our eBay store home page Custom lengths of cables are available - Please contact us for a quote... Colour: WhiteTotal Length: 0.5 Metre (MasterLink Plug Cable Section Approx. 0.25 Metre) FAST & FREE STANDARD UK DELIVERY Happy Bidding & Good Luck...

AUX 3.5mm Jack Plug to BeoLab 2000 MasterLink Cable(B&O Remote Control Required for Control i.e. Beo4/BeoLink 1000)(Length: 0.5 Metre - Two-Section Cable)No Reserve Price Finally, a brilliant cable solution to allow you to connect a device to your BeoLab 2000 We are pleased to bring to market this new range of BeoLab 2000 AUX cables. The long awaited cable solution will allow you to connect any device with a 3.5mm headphones/audio OUT connection. Typical examples include, iPad, iPhone, iPod, Android device, TV, computer etc etc. The cable, which consists of two sections (see photographs) connects to the device at one end and the MasterLink plug to the BeoLab 2000, at the other. You will require a B&O remote control, such as a BeoLink 1000 or Beo4, to setup the BeoLab 2000 in to AUX mode. Having setup, you may also wish to control volume level, switch on and off/standby using the remote, although control can be achieved using the hands-on control to BeoLab 2000. The setup process is only made once and does not need to be exercised each and every time you switch on BeoLab 2000. The only time you will need to re-programme is if you have a power cut. This solution allows for complete stand-alone use of the BeoLab 2000 as a loudspeaker. You do not need any other product/a connection to a main B&O setup in order to use in this setup (other than your connected device, of course - iPad etc.). Available in a range of different lengths and also in black or white - Ideal should you have your BeoLab 2000 wall mounted and you need a longer cable.We also have different source connection types available, such as RCA plugs. Available from our eBay store as a different item and also as buy it now. An Instruction set is included with your purchase for programming BeoLab 2000. Payment and Delivery Preferred payment by PayPal, cheque, bank transfer or cash on collection. FAST & FREE STANDARD UK DELIVERY Please click HERE to go to our eBay store home page Custom lengths of cables are available - Please contact us for a quote... Colour: WhiteTotal Length: 0.5 Metre (MasterLink Plug Cable Section Approx. 0.25 Metre) FAST & FREE STANDARD UK DELIVERY Happy Bidding & Good Luck...

AUX 3.5mm Jack Plug to BeoLab 2000 MasterLink Cable(B&O Remote Control Required for Control i.e. Beo4/BeoLink 1000)(Length: 0.5 Metre - Two-Section Cable)No Reserve Price Finally, a brilliant cable solution to allow you to connect a device to your BeoLab 2000 We are pleased to bring to market this new range of BeoLab 2000 AUX cables. The long awaited cable solution will allow you to connect any device with a 3.5mm headphones/audio OUT connection. Typical examples include, iPad, iPhone, iPod, Android device, TV, computer etc etc. The cable, which consists of two sections (see photographs) connects to the device at one end and the MasterLink plug to the BeoLab 2000, at the other. You will require a B&O remote control, such as a BeoLink 1000 or Beo4, to setup the BeoLab 2000 in to AUX mode. Having setup, you may also wish to control volume level, switch on and off/standby using the remote, although control can be achieved using the hands-on control to BeoLab 2000. The setup process is only made once and does not need to be exercised each and every time you switch on BeoLab 2000. The only time you will need to re-programme is if you have a power cut. This solution allows for complete stand-alone use of the BeoLab 2000 as a loudspeaker. You do not need any other product/a connection to a main B&O setup in order to use in this setup (other than your connected device, of course - iPad etc.). Available in a range of different lengths and also in black or white - Ideal should you have your BeoLab 2000 wall mounted and you need a longer cable.We also have different source connection types available, such as RCA plugs. Available from our eBay store as a different item and also as buy it now. An Instruction set is included with your purchase for programming BeoLab 2000. Payment and Delivery Preferred payment by PayPal, cheque, bank transfer or cash on collection. FAST & FREE STANDARD UK DELIVERY Please click HERE to go to our eBay store home page Custom lengths of cables are available - Please contact us for a quote... Colour: WhiteTotal Length: 0.5 Metre (MasterLink Plug Cable Section Approx. 0.25 Metre) FAST & FREE STANDARD UK DELIVERY Happy Bidding & Good Luck...

AUX 3.5mm Jack Plug to BeoLab 2000 MasterLink Cable(B&O Remote Control Required for Control i.e. Beo4/BeoLink 1000)(Length: 0.5 Metre - Two-Section Cable)No Reserve Price Finally, a brilliant cable solution to allow you to connect a device to your BeoLab 2000 We are pleased to bring to market this new range of BeoLab 2000 AUX cables. The long awaited cable solution will allow you to connect any device with a 3.5mm headphones/audio OUT connection. Typical examples include, iPad, iPhone, iPod, Android device, TV, computer etc etc. The cable, which consists of two sections (see photographs) connects to the device at one end and the MasterLink plug to the BeoLab 2000, at the other. You will require a B&O remote control, such as a BeoLink 1000 or Beo4, to setup the BeoLab 2000 in to AUX mode. Having setup, you may also wish to control volume level, switch on and off/standby using the remote, although control can be achieved using the hands-on control to BeoLab 2000. The setup process is only made once and does not need to be exercised each and every time you switch on BeoLab 2000. The only time you will need to re-programme is if you have a power cut. This solution allows for complete stand-alone use of the BeoLab 2000 as a loudspeaker. You do not need any other product/a connection to a main B&O setup in order to use in this setup (other than your connected device, of course - iPad etc.). Available in a range of different lengths and also in black or white - Ideal should you have your BeoLab 2000 wall mounted and you need a longer cable.We also have different source connection types available, such as RCA plugs. Available from our eBay store as a different item and also as buy it now. An Instruction set is included with your purchase for programming BeoLab 2000. Payment and Delivery Preferred payment by PayPal, cheque, bank transfer or cash on collection. FAST & FREE STANDARD UK DELIVERY Please click HERE to go to our eBay store home page Custom lengths of cables are available - Please contact us for a quote... Colour: WhiteTotal Length: 0.5 Metre (MasterLink Plug Cable Section Approx. 0.25 Metre) FAST & FREE STANDARD UK DELIVERY Happy Bidding & Good Luck...

AUX 3.5mm Jack Plug to BeoLab 2000 MasterLink Cable(B&O Remote Control Required for Control i.e. Beo4/BeoLink 1000)(Length: 0.5 Metre - Two-Section Cable)No Reserve Price Finally, a brilliant cable solution to allow you to connect a device to your BeoLab 2000 We are pleased to bring to market this new range of BeoLab 2000 AUX cables. The long awaited cable solution will allow you to connect any device with a 3.5mm headphones/audio OUT connection. Typical examples include, iPad, iPhone, iPod, Android device, TV, computer etc etc. The cable, which consists of two sections (see photographs) connects to the device at one end and the MasterLink plug to the BeoLab 2000, at the other. You will require a B&O remote control, such as a BeoLink 1000 or Beo4, to setup the BeoLab 2000 in to AUX mode. Having setup, you may also wish to control volume level, switch on and off/standby using the remote, although control can be achieved using the hands-on control to BeoLab 2000. The setup process is only made once and does not need to be exercised each and every time you switch on BeoLab 2000. The only time you will need to re-programme is if you have a power cut. This solution allows for complete stand-alone use of the BeoLab 2000 as a loudspeaker. You do not need any other product/a connection to a main B&O setup in order to use in this setup (other than your connected device, of course - iPad etc.). Available in a range of different lengths and also in black or white - Ideal should you have your BeoLab 2000 wall mounted and you need a longer cable.We also have different source connection types available, such as RCA plugs. Available from our eBay store as a different item and also as buy it now. An Instruction set is included with your purchase for programming BeoLab 2000. Payment and Delivery Preferred payment by PayPal, cheque, bank transfer or cash on collection. FAST & FREE STANDARD UK DELIVERY Please click HERE to go to our eBay store home page Custom lengths of cables are available - Please contact us for a quote... Colour: WhiteTotal Length: 0.5 Metre (MasterLink Plug Cable Section Approx. 0.25 Metre) FAST & FREE STANDARD UK DELIVERY Happy Bidding & Good Luck...

AUX 3.5mm Jack Plug to BeoLab 2000 MasterLink Cable(B&O Remote Control Required for Control i.e. Beo4/BeoLink 1000)(Length: 0.5 Metre - Two-Section Cable)No Reserve Price Finally, a brilliant cable solution to allow you to connect a device to your BeoLab 2000 We are pleased to bring to market this new range of BeoLab 2000 AUX cables. The long awaited cable solution will allow you to connect any device with a 3.5mm headphones/audio OUT connection. Typical examples include, iPad, iPhone, iPod, Android device, TV, computer etc etc. The cable, which consists of two sections (see photographs) connects to the device at one end and the MasterLink plug to the BeoLab 2000, at the other. You will require a B&O remote control, such as a BeoLink 1000 or Beo4, to setup the BeoLab 2000 in to AUX mode. Having setup, you may also wish to control volume level, switch on and off/standby using the remote, although control can be achieved using the hands-on control to BeoLab 2000. The setup process is only made once and does not need to be exercised each and every time you switch on BeoLab 2000. The only time you will need to re-programme is if you have a power cut. This solution allows for complete stand-alone use of the BeoLab 2000 as a loudspeaker. You do not need any other product/a connection to a main B&O setup in order to use in this setup (other than your connected device, of course - iPad etc.). Available in a range of different lengths and also in black or white - Ideal should you have your BeoLab 2000 wall mounted and you need a longer cable.We also have different source connection types available, such as RCA plugs. Available from our eBay store as a different item and also as buy it now. An Instruction set is included with your purchase for programming BeoLab 2000. Payment and Delivery Preferred payment by PayPal, cheque, bank transfer or cash on collection. FAST & FREE STANDARD UK DELIVERY Please click HERE to go to our eBay store home page Custom lengths of cables are available - Please contact us for a quote... Colour: WhiteTotal Length: 0.5 Metre (MasterLink Plug Cable Section Approx. 0.25 Metre) FAST & FREE STANDARD UK DELIVERY Happy Bidding & Good Luck...

AUX 3.5mm Jack Plug to BeoLab 2000 MasterLink Cable(B&O Remote Control Required for Control i.e. Beo4/BeoLink 1000)(Length: 0.5 Metre - Two-Section Cable)No Reserve Price Finally, a brilliant cable solution to allow you to connect a device to your BeoLab 2000 We are pleased to bring to market this new range of BeoLab 2000 AUX cables. The long awaited cable solution will allow you to connect any device with a 3.5mm headphones/audio OUT connection. Typical examples include, iPad, iPhone, iPod, Android device, TV, computer etc etc. The cable, which consists of two sections (see photographs) connects to the device at one end and the MasterLink plug to the BeoLab 2000, at the other. You will require a B&O remote control, such as a BeoLink 1000 or Beo4, to setup the BeoLab 2000 in to AUX mode. Having setup, you may also wish to control volume level, switch on and off/standby using the remote, although control can be achieved using the hands-on control to BeoLab 2000. The setup process is only made once and does not need to be exercised each and every time you switch on BeoLab 2000. The only time you will need to re-programme is if you have a power cut. This solution allows for complete stand-alone use of the BeoLab 2000 as a loudspeaker. You do not need any other product/a connection to a main B&O setup in order to use in this setup (other than your connected device, of course - iPad etc.). Available in a range of different lengths and also in black or white - Ideal should you have your BeoLab 2000 wall mounted and you need a longer cable.We also have different source connection types available, such as RCA plugs. Available from our eBay store as a different item and also as buy it now. An Instruction set is included with your purchase for programming BeoLab 2000. Payment and Delivery Preferred payment by PayPal, cheque, bank transfer or cash on collection. FAST & FREE STANDARD UK DELIVERY Please click HERE to go to our eBay store home page Custom lengths of cables are available - Please contact us for a quote... Colour: WhiteTotal Length: 0.5 Metre (MasterLink Plug Cable Section Approx. 0.25 Metre) FAST & FREE STANDARD UK DELIVERY Happy Bidding & Good Luck...

Bang & Olufsen B&O Beolab 2000 wall bracket. its used a couple of scratches here and there but in excellent condition

AUX 3.5mm Jack Plug to BeoLab 2000 MasterLink Cable(B&O Remote Control Required for Control i.e. Beo4/BeoLink 1000)(Length: 0.5 Metre - Two-Section Cable)No Reserve Price Finally, a brilliant cable solution to allow you to connect a device to your BeoLab 2000 We are pleased to bring to market this new range of BeoLab 2000 AUX cables. The long awaited cable solution will allow you to connect any device with a 3.5mm headphones/audio OUT connection. Typical examples include, iPad, iPhone, iPod, Android device, TV, computer etc etc. The cable, which consists of two sections (see photographs) connects to the device at one end and the MasterLink plug to the BeoLab 2000, at the other. You will require a B&O remote control, such as a BeoLink 1000 or Beo4, to setup the BeoLab 2000 in to AUX mode. Having setup, you may also wish to control volume level, switch on and off/standby using the remote, although control can be achieved using the hands-on control to BeoLab 2000. The setup process is only made once and does not need to be exercised each and every time you switch on BeoLab 2000. The only time you will need to re-programme is if you have a power cut. This solution allows for complete stand-alone use of the BeoLab 2000 as a loudspeaker. You do not need any other product/a connection to a main B&O setup in order to use in this setup (other than your connected device, of course - iPad etc.). Available in a range of different lengths and also in black or white - Ideal should you have your BeoLab 2000 wall mounted and you need a longer cable.We also have different source connection types available, such as RCA plugs. Available from our eBay store as a different item and also as buy it now. An Instruction set is included with your purchase for programming BeoLab 2000. Payment and Delivery Preferred payment by PayPal, cheque, bank transfer or cash on collection. FAST & FREE STANDARD UK DELIVERY Please click HERE to go to our eBay store home page Custom lengths of cables are available - Please contact us for a quote... Colour: WhiteTotal Length: 0.5 Metre (MasterLink Plug Cable Section Approx. 0.25 Metre) FAST & FREE STANDARD UK DELIVERY Happy Bidding & Good Luck...