Item is in working condition and includes power cord. Shipped carefully so no damage occurs. Please message if you have any questions! Buy from a trusted seller since 2017! Product Description Bowers & Wilkins SA250 Mk2 250W Rack-Mount Amplifier The Bowers & Wilkins SA250 Mk2 is designed to power and apply the correct equalization to the ISW-3 and ISW-4 custom install subwoofers. It is not suitable for driving any other loudspeakers. Specifications Description: 250W rack-mount amplifier with built-in sub-woofer equalization Amplifier inputs 2x RCA Phono socket, line in 2x RCA Phono socket, link out 1x XLR socket, line in 1x XLR socket, link out 3.5mm jack 12V trigger on/standby(overrides manual standby setting) 3.5mm jack 12V trigger equalization movie/music Amplifier outputs 1x Neutrik Speakon 4-pole speaker socket 2x pairs of Binding Posts Amplifier power output 250W Input impedance 33k? Signal / noise >80dB Rated power consumption 95W – 1/8 full power 30W – Idling Dimensions Height: 100mm (3.9 in) [88.5mm (3.5 in) plus feet] Width: 430mm (16.9 in) Depth: 322mm (12.7 in) Front panel Height: 2U 88.1mm/3.5 in Net weight 5.4kg (11.9 lb)

Product highlightsamplifier for Bowers & Wilkins ISW3 or ISW4 in-wall subwoofer Class D amplifier rated at 250 watts into 8 ohms or 4 ohms rack-mountable with included hardware front-panel volume, phase, low-pass crossover, bass extension, and EQ controls balanced mono XLR input and output unbalanced stereo line-level RCA inputs and outputs two sets of binding post speaker outputs one Neutrik Speakon speaker output signal-sensing auto on/off mode 3.5mm 12-volt trigger inputs for power-on and movie/music mode 16-15/16W x 3-15/16H x 14-3/16D (rack spaces: 2U) weight: 11.9 lbs. warranty: 2 years Whats in the boxCustom install subwoofer amplifier 59 AC power cord 3-Piece Neutrik Speakon plug 2 Rack-mount brackets 2 Handles 4 Long screws 6 Short screws 10 Flat washers 10 Lock washers 4 Rubber hole plugs Custom Installation booklet Safety and Warranty Instructions About this itemWritten by Crutchfields James Ralston

B&W SA250 MK2 amplifier. Condition is Used. Shipped with USPS Ground Advantage.

Product highlightsamplifier for Bowers & Wilkins ISW3 or ISW4 in-wall subwoofer Class D amplifier rated at 250 watts into 8 ohms or 4 ohms rack-mountable with included hardware front-panel volume, phase, low-pass crossover, bass extension, and EQ controls balanced mono XLR input and output unbalanced stereo line-level RCA inputs and outputs two sets of binding post speaker outputs one Neutrik Speakon speaker output signal-sensing auto on/off mode 3.5mm 12-volt trigger inputs for power-on and movie/music mode 16-15/16W x 3-15/16H x 14-3/16D (rack spaces: 2U) weight: 11.9 lbs. warranty: 2 years Whats in the boxCustom install subwoofer amplifier 59 AC power cord 3-Piece Neutrik Speakon plug 2 Rack-mount brackets 2 Handles 4 Long screws 6 Short screws 10 Flat washers 10 Lock washers 4 Rubber hole plugs Custom Installation booklet Safety and Warranty Instructions About this itemWritten by Crutchfields James Ralston