Bang & Olufsen Beogram 4002 - very good condition - fully serviced - polished dust cover Aluminium part of cover isnt perfect, dust cover falls when open - wire is bent Type 5501 with AC motor CD4 demodulator Oak frame Quadrophonic MMC6000 cartridge Includes: - Bang & Olufsen Beogram 4002, - MMC6000 cartridge. www.crinos.pl The CRINOS company deals with the distribution of Bang & Olufsen products. We rely mainly on the sale of used equipment from this Danish manufacturer. We also offer assistance in purchasing new equipment. Thanks to a network of colleagues, we can offer warranty and post-warranty service for equipment purchased from us. Our motto is high quality services and customer satisfaction. All our offered products come from proven Bang & Olufsen dealers from European Union countries.

I do not know much about this unit, so selling as is for parts or repair only. Comes with everything seen

Original Bang & Olufsen MMC20CL Cartridge/Stylus perfect working orderChecked on a spectrum analyser, delicate, accurate and precise matching perfectly to its published specificationTracking perfectly with 1gram vertical tracking force The first B&O cartridge to use a single crystal sapphire cantilever. Get yourself the originalSingle crystal sapphire cantilever offers a very rigid but light structure five times stiffer than aluminium and 21% stiffer than beryllium transferring more of the signal from your vinylEffective tip mass is a very low 0.3mg which ensures low record wear and a high stylus resonance well beyond the audible rangeThe body itself forms an effective Mu-Metal screen against stray hum fields practically eliminating magnetic interference Courtesy of Beoworld.orgMMC stands for Moving Micro-Cross; the patented moving-iron principle upon which all B&O cartridges were based. This unique system employed a cross-shaped armature which, among other advantages, guaranteed exceptional stereo separation since each channel moves on a separate axis.The job of any pickup cartridge is to transform the records physical profile (groove modulation) into corresponding electrical signals (which are then amplified or enlarged by the amplifier and turned into audible sound waves by the loudspeaker.A cartridge must perform three separate and exacting tasks if it is to do this job successfully. It must function mechanically (the movements of the stylus in the groove); it must function magnetically (using the physical movements to create changes in a magnetic field); and it must function electrically (using the changes in magnetic flux to generate an electrical current). At each stage, one type of energy is transferred into another, quite different, type. And the transfer must be perfect, with no energy lost and none added from extraneous sources.No cartridge will ever reach this ideal unless the Laws of Physics can be repealed. However, by understanding the relationships between the three transfer stages and continually applying refined engineering techniques, B&Os belief was that each stage of cartridge improvement would bring each successive cartridge closer to the ideal. Record wear and the cartridgeIf you take music seriously the value of your record collection is likely to be high. Many of your records are likely to be irreplaceable. You will also know that the signals pressed into your vinyl discs are very fragile indeed. The pickup cartridge can be the discs worse enemy since an ill-suited cartridge can mark a record for life in a single play.While B&O is aware that cartridge specifications are inter-related, their research shows consistently that Effective Tip Mass (ETM) is one of the major factors affecting record wear. ETM is the equivalent of the amount of inertia the groove sees in moving or accelerating the stylus tip. Consequently, the higher the ETM value, the higher the force required for a given constant acceleration. Obviously, more force results in more wear.Three elements contribute to ETM. The stylus tip (diamond) contributes with its entire weight and mass. The armature contributes between 5 - 20% of its weight and mass; the cantilever around 30%. B&O has been able to reduce ETM substantially by refining these elements and building them into an integrated unit. The result is a system which not only reduces damage to the groove walls dramatically, but also provides exceptional performance at all frequencies. Any questions just get in touch, Id be glad to help.

Original Bang & Olufsen MMC20CL Cartridge/Stylus perfect working order Uk stock ready for dispatch NOW Checked on a spectrum analyser, delicate, accurate and precise matching perfectly to its published specificationTracking perfectly with 1gram vertical tracking force The first B&O cartridge to use a single crystal sapphire cantilever. Get yourself the originalSingle crystal sapphire cantilever offers a very rigid but light structure five times stiffer than aluminium and 21% stiffer than beryllium transferring more of the signal from your vinylEffective tip mass is a very low 0.3mg which ensures low record wear and a high stylus resonance well beyond the audible rangeThe body itself forms an effective Mu-Metal screen against stray hum fields practically eliminating magnetic interference Courtesy of Beoworld.orgMMC stands for Moving Micro-Cross; the patented moving-iron principle upon which all B&O cartridges were based. This unique system employed a cross-shaped armature which, among other advantages, guaranteed exceptional stereo separation since each channel moves on a separate axis.The job of any pickup cartridge is to transform the records physical profile (groove modulation) into corresponding electrical signals (which are then amplified or enlarged by the amplifier and turned into audible sound waves by the loudspeaker.A cartridge must perform three separate and exacting tasks if it is to do this job successfully. It must function mechanically (the movements of the stylus in the groove); it must function magnetically (using the physical movements to create changes in a magnetic field); and it must function electrically (using the changes in magnetic flux to generate an electrical current). At each stage, one type of energy is transferred into another, quite different, type. And the transfer must be perfect, with no energy lost and none added from extraneous sources.No cartridge will ever reach this ideal unless the Laws of Physics can be repealed. However, by understanding the relationships between the three transfer stages and continually applying refined engineering techniques, B&Os belief was that each stage of cartridge improvement would bring each successive cartridge closer to the ideal. Record wear and the cartridgeIf you take music seriously the value of your record collection is likely to be high. Many of your records are likely to be irreplaceable. You will also know that the signals pressed into your vinyl discs are very fragile indeed. The pickup cartridge can be the discs worse enemy since an ill-suited cartridge can mark a record for life in a single play.While B&O is aware that cartridge specifications are inter-related, their research shows consistently that Effective Tip Mass (ETM) is one of the major factors affecting record wear. ETM is the equivalent of the amount of inertia the groove sees in moving or accelerating the stylus tip. Consequently, the higher the ETM value, the higher the force required for a given constant acceleration. Obviously, more force results in more wear.Three elements contribute to ETM. The stylus tip (diamond) contributes with its entire weight and mass. The armature contributes between 5 - 20% of its weight and mass; the cantilever around 30%. B&O has been able to reduce ETM substantially by refining these elements and building them into an integrated unit. The result is a system which not only reduces damage to the groove walls dramatically, but also provides exceptional performance at all frequencies. Any questions just get in touch, Id be glad to help.

MMC6000 A true CD4 quadraphonic pick-up cartridge, originally specified for the Beogram 6000 - see explanation belowAlso suitable For Beogram 4000 4002 and 4004 specifically and Tangential tone arms especially but interchangeable with many othersSupplied in its original B&O box with all the tools and test certificate (plastic sleeve missing - please see photos)Shibata profile Diamond keeps better contact with the groove and provides a better signal to be amplifiedUnused from new apart from testing with box and all accessoriesBuy with confidence - Over 75 MMC Cartridge styluses sold in new or new other condition with 100% feedbackThe QUALITRONICS DIFFERENCEMatch with:Beogram 3400, the first B&O CD4 Quadraphonic radial deckBeogram 6000 or 4002 with CD4 circuitAny tangential Beogram that used the thousand or 20 series of cartridge styli. Still and exemplary pickup in stereo only useUpgrade with:Not an upgrade but the successor cartridge MMC20CLMost of these are available in my other listings already or I have them in stock so do have a look below, if not I can source them for you in a few days. Please message me for that serviceTESTIMONIALS MMC6000 Manufactured: 1974 - 1979 Designer: Subir Pramanik Colours: Silver Bang & Olufsens (then) most accomplished pickup cartridge was fitted to Beogram 6000. The MMC principle was adapted to track 4-channel records: both Quadradiscs and SQ. MMC 6000 would track both mono and stereo records with the utmost fidelity. It was designed for record-players with tangential arms. The stylus was the Pramanik diamond, named after its inventor: engineer S K Pramanik from Bang & Olufsens Laboratories. The diamonds radii were 7 um/2 x 50 um. It was a refinement of the elliptical shape, rather like the shape of the cutter-head, and enabled greater contact with the undulations of the record groove. The cantilever was made of berylium - a material which is harder yet lighter than popularly-used aluminium. Effective tip mass was 0.22 mg. Compliance was higher than 30x10-6 cm/dyne. Recommended- stylus pressure was 1g. The total frequency range was 20-45.000 Hz. In the audible range: 20-15.000 Hz there is less than 1.5 dB variation and in the inaudible range 20,000-45,000 Hz where the carrier frequencies lie, the pick-up fulfils RCA/JVCs specifications for a Class A discrete 4-channel pick-up cartridge. Each cartridge is an integrated, individually calibrated unit. The stylus unit is not separately replaceable since it is part of the integrated unit. An individual frequency response curve traced on a Bruel & Kjaer level recorder and a complete Calibration Card were enclosed with every MMC 6000 sold.MMC6000 Product Specifications Pramanik diamond Radius of curvature CD-4 quadro Frequency range 20 - 15000 Hz+/- 1,5dB 20 - 45000 Hz (CD4) Channel separation 1000Hz >25dB 40 - 10000Hz >20dB Channel difference <1,5dB Intermodulation <1% Recommended stylus pressure 1g Compliance 30 x 10(-6)cm/dyne Effective tip mass 0,22mg Output mV/cm/sec. 0,6mV/47kOhmsWORLDWIDE carriage may cost more OR LESS!! than the listing states (I have to enter an estimated figure) and will be charged in full as per the service chosen and destination country. Eg, air, surface, express, economy. I ALWAYS SEND WITH QUALITY PACKAGING, TRACKING AND INSURANCE. IF IN ANY DOUBT PLEASE ASK FOR A QUOTE. I NEED YOUR FULL ADDRESS FOR THISPostage/Carriage charges:You may have noticed that these has risen lately. Insurance has almost doubled and many carriers will not accept turntables, speakers or amplifiers, meaning I have to find a specialist. Im sorry that these have to be passed onto you. Qualitronics aims to recycle packaging as much as possible but it will always be top quality and usually its double-box where appropriate too.DELIVERY TO CHINA, ISRAEL, AUSTRALASIA, INDIA, RUSSIAN FEDERATION AND SOUTH AMERICA WILL BE ROUGHLY DOUBLE THE QUOTED INTERNATIONAL PRICE. TO BID IS TO ACCEPT THIS EXTRA PAYMENT. THANKS!About Qualitronics!Im running this business part-time whilst I raise my children. My daughter Issy is 6 years old, the apple of my eye, my teacher and the beneficiary of your purchases. (She says THANK YOU VERY MUCH!) Tommy is a terror-bag Toddler, 2 years old and his dimples charm the world. I endeavour to source the HIGHEST quality electronics, mostly B&O HiFi and will have owned most of the models in question at some time in my life. This gives me a real experience of the merits to share with you. Im a time-served Sound Engineer and use my trained ear to check each audio item. Its not just sonics though, look out for the weird and wonderful... as long as its well madePRE-SALE ENQUIRIES:Im more than happy to answer any questions, offer advice and make suggestions over the phone and many customers have already found this useful.Please call the customer service line accessed by clicking the ask a question feature or opening the full information link in the business information section below. The full number is not always displayed. Often the first zero is missing. This is ebays procedure and not mine. PRODUCTION DESIGNERS AND PROPERTIES BUYERS A number of my items have now featured in TV ads, theatre and film productions and professional photography having been bought by production designers, location agents and properties buyers. These include a Beocenter 2200, Beocenter 7007, Beovox S45 speakers. I recognise the tight deadlines that you have to work to and the immediacy you often have to work under. For the speediest solution I can offer, including same or next day delivery, suitability of product or advice on matching items to an era (or decade), please use the customer service line accessed by clicking the ask a question feature or opening the full information link in the business information section below. COLLECT IN PERSON:This is actively encouraged! This way, no clumsy or disgruntled delivery person can break it! Do check in advance the location of the item youre interested in. A quick call will be all thats needed to confirm the whereabouts. Whilst the business is registered in London, I also have stock stored near Maidstone, Manchester and the Midlands. I can only accept cash on collection as the payment method if visiting the premises due to the PayPal charge back scam. INSTALLATION:I am increasingly being commissioned to complete installations of the products that I sell. Depending upon your location and items purchased this can be achieved for little more than the usual shipping and insurance costs of the selected units. You receive the assurance of a properly connected system, including optimum placement design and the benefit of a full demonstration, highlighting the tips and techniques garnered from decades of experience and expertise. Recent installations have ranged from a single Beocenter being connected to the existing speakers and unit for an 89-years young-lady for a few hundred pounds to a multi-room, Beocenter, Beogram, Beovox and B&O dedicated cabinet and stands combination, with remote control, for a few thousand pounds.Please use the ask a question feature to access the pre-sales telephone number to discuss your requirements.SOURCING SERVICE:Cant find that B&O product that youve yearned for since you were a kid? Need a rare or discontinued part to repair your unit? If I dont have it in stock, then I can normally source one very quickly. I have a wide network of fellow enthusiasts, collectors, dealerships and retired B&O Engineers whom I can call upon to fulfill your needs.FEEDBACK:Your positive feedback is vital to all good sellers. It lets us know that you are happy, if not delirious, about your purchase. On very rare occasions, there may be an issue with your order, such as courier damage or simply leaving transit screws engaged. (Quite common). I can remedy any such issues to your complete satisfaction most quickly via the telephone or eBay message (without the need to open a case). Please use the contact number shown when you select the ask a question button. I realise that you are very, very busy, only one in three of my clients has found the time to leave feedback that also informs their peers of their positive experience. Indeed all of Qualitronics feedback is from buyers and not inflated by that of other sellers. Your contribution will be greatly appreciated. INTERNATIONAL PURCHASES:Please note that Qualitronics is not responsible for any additional import tariffs or customs charges levied at source or upon delivery. It is the buyers responsibility to check before purchasing for their own countrys charges. VOLTAGE:All electrical items are UK voltage (240v) and B&O UK type xxxx unless otherwise stated.

Original Bang & Olufsen MMC20CL Cartridge/Stylus perfect working orderChecked on a spectrum analyser, delicate, accurate and precise matching perfectly to its published specificationTracking perfectly with 1gram vertical tracking force The first B&O cartridge to use a single crystal sapphire cantilever. Get yourself the originalSingle crystal sapphire cantilever offers a very rigid but light structure five times stiffer than aluminium and 21% stiffer than beryllium transferring more of the signal from your vinylEffective tip mass is a very low 0.3mg which ensures low record wear and a high stylus resonance well beyond the audible rangeThe body itself forms an effective Mu-Metal screen against stray hum fields practically eliminating magnetic interference Courtesy of Beoworld.orgMMC stands for Moving Micro-Cross; the patented moving-iron principle upon which all B&O cartridges were based. This unique system employed a cross-shaped armature which, among other advantages, guaranteed exceptional stereo separation since each channel moves on a separate axis.The job of any pickup cartridge is to transform the records physical profile (groove modulation) into corresponding electrical signals (which are then amplified or enlarged by the amplifier and turned into audible sound waves by the loudspeaker.A cartridge must perform three separate and exacting tasks if it is to do this job successfully. It must function mechanically (the movements of the stylus in the groove); it must function magnetically (using the physical movements to create changes in a magnetic field); and it must function electrically (using the changes in magnetic flux to generate an electrical current). At each stage, one type of energy is transferred into another, quite different, type. And the transfer must be perfect, with no energy lost and none added from extraneous sources.No cartridge will ever reach this ideal unless the Laws of Physics can be repealed. However, by understanding the relationships between the three transfer stages and continually applying refined engineering techniques, B&Os belief was that each stage of cartridge improvement would bring each successive cartridge closer to the ideal. Record wear and the cartridgeIf you take music seriously the value of your record collection is likely to be high. Many of your records are likely to be irreplaceable. You will also know that the signals pressed into your vinyl discs are very fragile indeed. The pickup cartridge can be the discs worse enemy since an ill-suited cartridge can mark a record for life in a single play.While B&O is aware that cartridge specifications are inter-related, their research shows consistently that Effective Tip Mass (ETM) is one of the major factors affecting record wear. ETM is the equivalent of the amount of inertia the groove sees in moving or accelerating the stylus tip. Consequently, the higher the ETM value, the higher the force required for a given constant acceleration. Obviously, more force results in more wear.Three elements contribute to ETM. The stylus tip (diamond) contributes with its entire weight and mass. The armature contributes between 5 - 20% of its weight and mass; the cantilever around 30%. B&O has been able to reduce ETM substantially by refining these elements and building them into an integrated unit. The result is a system which not only reduces damage to the groove walls dramatically, but also provides exceptional performance at all frequencies. Any questions just get in touch, Id be glad to help.

Original Bang & Olufsen MMC20CL Cartridge/Stylus perfect working order Uk stock ready for dispatch NOW Checked on a spectrum analyser, delicate, accurate and precise matching perfectly to its published specificationTracking perfectly with 1gram vertical tracking force The first B&O cartridge to use a single crystal sapphire cantilever. Get yourself the originalSingle crystal sapphire cantilever offers a very rigid but light structure five times stiffer than aluminium and 21% stiffer than beryllium transferring more of the signal from your vinylEffective tip mass is a very low 0.3mg which ensures low record wear and a high stylus resonance well beyond the audible rangeThe body itself forms an effective Mu-Metal screen against stray hum fields practically eliminating magnetic interference Courtesy of Beoworld.orgMMC stands for Moving Micro-Cross; the patented moving-iron principle upon which all B&O cartridges were based. This unique system employed a cross-shaped armature which, among other advantages, guaranteed exceptional stereo separation since each channel moves on a separate axis.The job of any pickup cartridge is to transform the records physical profile (groove modulation) into corresponding electrical signals (which are then amplified or enlarged by the amplifier and turned into audible sound waves by the loudspeaker.A cartridge must perform three separate and exacting tasks if it is to do this job successfully. It must function mechanically (the movements of the stylus in the groove); it must function magnetically (using the physical movements to create changes in a magnetic field); and it must function electrically (using the changes in magnetic flux to generate an electrical current). At each stage, one type of energy is transferred into another, quite different, type. And the transfer must be perfect, with no energy lost and none added from extraneous sources.No cartridge will ever reach this ideal unless the Laws of Physics can be repealed. However, by understanding the relationships between the three transfer stages and continually applying refined engineering techniques, B&Os belief was that each stage of cartridge improvement would bring each successive cartridge closer to the ideal. Record wear and the cartridgeIf you take music seriously the value of your record collection is likely to be high. Many of your records are likely to be irreplaceable. You will also know that the signals pressed into your vinyl discs are very fragile indeed. The pickup cartridge can be the discs worse enemy since an ill-suited cartridge can mark a record for life in a single play.While B&O is aware that cartridge specifications are inter-related, their research shows consistently that Effective Tip Mass (ETM) is one of the major factors affecting record wear. ETM is the equivalent of the amount of inertia the groove sees in moving or accelerating the stylus tip. Consequently, the higher the ETM value, the higher the force required for a given constant acceleration. Obviously, more force results in more wear.Three elements contribute to ETM. The stylus tip (diamond) contributes with its entire weight and mass. The armature contributes between 5 - 20% of its weight and mass; the cantilever around 30%. B&O has been able to reduce ETM substantially by refining these elements and building them into an integrated unit. The result is a system which not only reduces damage to the groove walls dramatically, but also provides exceptional performance at all frequencies. Any questions just get in touch, Id be glad to help.

Please use the following YouTube video link to see and hear this working: https://youtu.be/fMheHuUBYLg In excellent working condition. Tested and sounding great. Has one very small mark on the side which is barely visible. (SHOWN IN LAST PHOTO) No stylus cover but I will make sure the cartridge is fully secured and well protected for transport. For more info on this super rare cartridge please use the website below: https://www.beoworld.org/prod_details.asp?pid=726 Will be sent fully tracked. For more info: 07871927566

MMC6000 A true CD4 quadraphonic pick-up cartridge, originally specified for the Beogram 6000 - see explanation belowAlso suitable For Beogram 4000 4002 and 4004 specifically and Tangential tone arms especially but interchangeable with many othersSupplied in its original B&O box with all the tools and test certificate (plastic sleeve missing - please see photos)Shibata profile Diamond keeps better contact with the groove and provides a better signal to be amplifiedUnused from new apart from testing with box and all accessoriesBuy with confidence - Over 75 MMC Cartridge styluses sold in new or new other condition with 100% feedbackThe QUALITRONICS DIFFERENCEMatch with:Beogram 3400, the first B&O CD4 Quadraphonic radial deckBeogram 6000 or 4002 with CD4 circuitAny tangential Beogram that used the thousand or 20 series of cartridge styli. Still and exemplary pickup in stereo only useUpgrade with:Not an upgrade but the successor cartridge MMC20CLMost of these are available in my other listings already or I have them in stock so do have a look below, if not I can source them for you in a few days. Please message me for that serviceTESTIMONIALS MMC6000 Manufactured: 1974 - 1979 Designer: Subir Pramanik Colours: Silver Bang & Olufsens (then) most accomplished pickup cartridge was fitted to Beogram 6000. The MMC principle was adapted to track 4-channel records: both Quadradiscs and SQ. MMC 6000 would track both mono and stereo records with the utmost fidelity. It was designed for record-players with tangential arms. The stylus was the Pramanik diamond, named after its inventor: engineer S K Pramanik from Bang & Olufsens Laboratories. The diamonds radii were 7 um/2 x 50 um. It was a refinement of the elliptical shape, rather like the shape of the cutter-head, and enabled greater contact with the undulations of the record groove. The cantilever was made of berylium - a material which is harder yet lighter than popularly-used aluminium. Effective tip mass was 0.22 mg. Compliance was higher than 30x10-6 cm/dyne. Recommended- stylus pressure was 1g. The total frequency range was 20-45.000 Hz. In the audible range: 20-15.000 Hz there is less than 1.5 dB variation and in the inaudible range 20,000-45,000 Hz where the carrier frequencies lie, the pick-up fulfils RCA/JVCs specifications for a Class A discrete 4-channel pick-up cartridge. Each cartridge is an integrated, individually calibrated unit. The stylus unit is not separately replaceable since it is part of the integrated unit. An individual frequency response curve traced on a Bruel & Kjaer level recorder and a complete Calibration Card were enclosed with every MMC 6000 sold.MMC6000 Product Specifications Pramanik diamond Radius of curvature CD-4 quadro Frequency range 20 - 15000 Hz+/- 1,5dB 20 - 45000 Hz (CD4) Channel separation 1000Hz >25dB 40 - 10000Hz >20dB Channel difference <1,5dB Intermodulation <1% Recommended stylus pressure 1g Compliance 30 x 10(-6)cm/dyne Effective tip mass 0,22mg Output mV/cm/sec. 0,6mV/47kOhmsWORLDWIDE carriage may cost more OR LESS!! than the listing states (I have to enter an estimated figure) and will be charged in full as per the service chosen and destination country. Eg, air, surface, express, economy. I ALWAYS SEND WITH QUALITY PACKAGING, TRACKING AND INSURANCE. IF IN ANY DOUBT PLEASE ASK FOR A QUOTE. I NEED YOUR FULL ADDRESS FOR THISPostage/Carriage charges:You may have noticed that these has risen lately. Insurance has almost doubled and many carriers will not accept turntables, speakers or amplifiers, meaning I have to find a specialist. Im sorry that these have to be passed onto you. Qualitronics aims to recycle packaging as much as possible but it will always be top quality and usually its double-box where appropriate too.DELIVERY TO CHINA, ISRAEL, AUSTRALASIA, INDIA, RUSSIAN FEDERATION AND SOUTH AMERICA WILL BE ROUGHLY DOUBLE THE QUOTED INTERNATIONAL PRICE. TO BID IS TO ACCEPT THIS EXTRA PAYMENT. THANKS!About Qualitronics!Im running this business part-time whilst I raise my children. My daughter Issy is 6 years old, the apple of my eye, my teacher and the beneficiary of your purchases. (She says THANK YOU VERY MUCH!) Tommy is a terror-bag Toddler, 2 years old and his dimples charm the world. I endeavour to source the HIGHEST quality electronics, mostly B&O HiFi and will have owned most of the models in question at some time in my life. This gives me a real experience of the merits to share with you. Im a time-served Sound Engineer and use my trained ear to check each audio item. Its not just sonics though, look out for the weird and wonderful... as long as its well madePRE-SALE ENQUIRIES:Im more than happy to answer any questions, offer advice and make suggestions over the phone and many customers have already found this useful.Please call the customer service line accessed by clicking the ask a question feature or opening the full information link in the business information section below. The full number is not always displayed. Often the first zero is missing. This is ebays procedure and not mine. PRODUCTION DESIGNERS AND PROPERTIES BUYERS A number of my items have now featured in TV ads, theatre and film productions and professional photography having been bought by production designers, location agents and properties buyers. These include a Beocenter 2200, Beocenter 7007, Beovox S45 speakers. I recognise the tight deadlines that you have to work to and the immediacy you often have to work under. For the speediest solution I can offer, including same or next day delivery, suitability of product or advice on matching items to an era (or decade), please use the customer service line accessed by clicking the ask a question feature or opening the full information link in the business information section below. COLLECT IN PERSON:This is actively encouraged! This way, no clumsy or disgruntled delivery person can break it! Do check in advance the location of the item youre interested in. A quick call will be all thats needed to confirm the whereabouts. Whilst the business is registered in London, I also have stock stored near Maidstone, Manchester and the Midlands. I can only accept cash on collection as the payment method if visiting the premises due to the PayPal charge back scam. INSTALLATION:I am increasingly being commissioned to complete installations of the products that I sell. Depending upon your location and items purchased this can be achieved for little more than the usual shipping and insurance costs of the selected units. You receive the assurance of a properly connected system, including optimum placement design and the benefit of a full demonstration, highlighting the tips and techniques garnered from decades of experience and expertise. Recent installations have ranged from a single Beocenter being connected to the existing speakers and unit for an 89-years young-lady for a few hundred pounds to a multi-room, Beocenter, Beogram, Beovox and B&O dedicated cabinet and stands combination, with remote control, for a few thousand pounds.Please use the ask a question feature to access the pre-sales telephone number to discuss your requirements.SOURCING SERVICE:Cant find that B&O product that youve yearned for since you were a kid? Need a rare or discontinued part to repair your unit? If I dont have it in stock, then I can normally source one very quickly. I have a wide network of fellow enthusiasts, collectors, dealerships and retired B&O Engineers whom I can call upon to fulfill your needs.FEEDBACK:Your positive feedback is vital to all good sellers. It lets us know that you are happy, if not delirious, about your purchase. On very rare occasions, there may be an issue with your order, such as courier damage or simply leaving transit screws engaged. (Quite common). I can remedy any such issues to your complete satisfaction most quickly via the telephone or eBay message (without the need to open a case). Please use the contact number shown when you select the ask a question button. I realise that you are very, very busy, only one in three of my clients has found the time to leave feedback that also informs their peers of their positive experience. Indeed all of Qualitronics feedback is from buyers and not inflated by that of other sellers. Your contribution will be greatly appreciated. INTERNATIONAL PURCHASES:Please note that Qualitronics is not responsible for any additional import tariffs or customs charges levied at source or upon delivery. It is the buyers responsibility to check before purchasing for their own countrys charges. VOLTAGE:All electrical items are UK voltage (240v) and B&O UK type xxxx unless otherwise stated.

Vintage Bang & Olufsen B&O Beogram 6000 Wood Finish - MMC20EN Cartridge/New Belt. This product has been thoroughly cleaned externally/ Internally where possible & has been tested/ visually inspected prior to advertising to ensure the item is in functioning working order. This piece of kit has been fitted with a new belt and has had the single oiled for good measure, it comes in full working order with a MMC 20EN Cart. The piece of kit has minor signs of wear from previous use and the platter has had a hard life although this can be covered by a rubber platter mat which can obtained online at low cost. Manufactured: 1981 - 1981 Designer: Jacob Jensen Colours: Rosewood, Teak, White, OakBeogram 6000 - Type 5751 - was a fully automatic record player with one-touch operation.Put a record on the turntable, touch START and let Bang & Olufsen technology do the rest. The lightweight, low inertia tone arm was fitted with the MMC20EN pick-up cartridge. This had a naked elliptical diamond and a low Effective Tip Mass which, together with the lightweight arm, secured excellent tracking performance and minimum record wear. The patented spring suspension system effectively prevented external knocks and vibration from affecting tracking and sound quality. This later radial 6000 model was fitted with Datalink and was really a Beogram 2402 with new electronics in the same design.BeoGram 6000 Record Deck Type 5751 Product Specifications Speeds 33-45 rpm. Wow and flutter < +/- 0.06 % Rumble weighted > 65 dB Rumble unweighted > 45 dB Motor Servo controlled DC Drive system Belt Power supply 180 - 265 (110) V Power consumption 8 watts Dimensions 44 x 8.5 x 37 cm Weight 6.5 kg Recommended stylus pressure MMC20EN 12 mN / 1.2 gram

Please use the following YouTube video link to see and hear this working: https://youtu.be/fMheHuUBYLg In excellent working condition. Tested and sounding great. Has one very small mark on the side which is barely visible. (SHOWN IN LAST PHOTO) No stylus cover but I will make sure the cartridge is fully secured and well protected for transport. For more info on this super rare cartridge please use the website below: https://www.beoworld.org/prod_details.asp?pid=726 Will be sent fully tracked. For more info: 07871927566