43 BLAUPUNKT 43/134M-GB-11B-FEGUX-UK LED 43 IR SENSOR IR-32US E236256 94V-0. WORKING perfectly fine REMOVED from BROKEN SCREEN TV

Blaupunkt 49/148O-GB-11B-FGU-UK STUCK IN STANDBY? Firmware to reload via usb You will be sent a link to download the firmware for the Blaupunkt 49/148O-GB-11B-EGP-UK TV with screen LC490DUY SHA1 and the main board T.MS3463S.711. This doesnt have the flash ic on the main board but has a Nand ic on the back of the main board. This software will attempt to reload the contents of the Nand and should if successful give you a fully functional TV again that will reboot and start the first time installation screen. The instructions will be sent on how to use the file that will be sent to the buyer. This involves loading the supplied single file onto a usb 2 memory stick preferably less than 4gb and formatted to fat32.Unfortunately if there are other issues with the main board then this will never resolve them. So this will never rejuvenate all TVs which have other hardware issues. So you are taking a risk in it not working, however you will not cause any damage to the main board in carrying this operation out and as these boards are hard to come by then you can decide whether this is suitable. If you select local collection then the file will be uploaded to a site with the instructions where you have 7days to download it before the link dies and if you wish to you can collect the CD from me. If you select postage then a cd will be sent out to you with the file and instructions with either 2nd class or first class depending on your preference. If you do not have a suitable memory stick I can provide one at extra cost with the file loaded onto it, please advise me if you wish to proceed in this respect. I would suggest keeping the file that is sent to you for future reference in case it ever happens again.Any questions ask awayAll my items are despatched promptly which is normally same day despatch.

Blaupunkt 32/133O-WB-11B-EGP-UK STUCK IN STANDBY? Firmware to reload via usbYou will be sent a link to download the firmware for the Blaupunkt 32/133O-WB-11B-EGP-UK TV with screen LSC320AN10 and the main board TP.MS3463S.PB711. This doesnt have the flash ic on the main board but has a Nand ic on the back of the main board. This software will attempt to reload the contents of the Nand and should if successful give you a fully functional TV again that will reboot and start the first time installation screen. The instructions will be sent on how to use the file that will be sent to the buyer. This involves loading the supplied single file onto a usb 2 memory stick preferably less than 4gb and formatted to fat32.Unfortunately if there are other issues with the main board then this will never resolve them. So this will never rejuvenate all TVs which have other hardware issues. So you are taking a risk in it not working, however you will not cause any damage to the main board in carrying this operation out and as these boards are hard to come by then you can decide whether this is suitable. If you select local collection then the file will be uploaded to a site where you have 7days to download it before the link dies and you can collect the cd containing the instructions and the file from me in Worthing (south coast). If you select postage then a cd will be sent out to you with the file and the instructions with either 2nd class or 1st class depending on your preference as well as a download link as well. If you do not have a suitable memory stick I can provide one at extra cost with the file loaded onto it, please advise me if you wish to proceed in this respect. I would suggest keeping the file that is sent to you for future reference in case it ever happens again.Any questions ask awayAll my items are despatched promptly which is normally same day despatch.

BLAUPUNKT 39/224I-GB-5B-FHBKUP-UK TP.MSD309.BP85 C12415 STUCK IN STANDBY REPAIR IC UF11 PLEASE NOTE THIS ISNT THE MAIN BOARD FOR SALE BUT IT IS FOR ONE FLASH IC UF11 FOR THE MAIN BOARDAs a result of some people abusing the returns process on ebay I will no longer be selling the programmed spi flash ics for TVs as new other, they will now be sold as spares and repairs. I have had people think they are buying a new TV board for £10 and 80p delivery for first class! This I will not tolerate when they cannot be bothered to read the listing details and then ask for a return for there own incompetent mistake! I suggest you look at my feedback for the programmed spi flash ics and make your own mind up. Until ebay does something about this then this is the only way to combat this! Sorry to the majority of buyers but I am sure you will understand.If your Blaupunkt 39/224I-GB-5B-FHBKUP-UK LED TV is stuck in standby or reboots constantly, continually on channel search, different colours on screen or up side down picture then the SPI Flash could have been corrupted. Simple solution replace SPI Flash ic UF11 with the programmed chip supplied. This is suitable for the following LED sets: Blaupunkt 39inch led tv 39/224I-GB-5B-FHBKUP-UK or Blaupunkt 39/224I-GB-5B-FHBKUP-EU Main Board TP.MSD309.BP85 C12415 Screen number suitable for this SPI FLASH EPROM V390HJ1-LE1 IF YOUR SCREEN MODEL NUMBER AND TV MODEL DOESNT MATCH EXACTLY THEN PLEASE DONT PURCHASE IT! IT WILL NOT WORK OTHERWISE! Soldering skills are required to remove the spi flash from the PCB without causing damage to any of the surface mount components and to solder the supplied SPI Flash IC. After fitting the programmed spi flash ic you will need to carry out a First time installation of the TV to get all the Freeview channels for your country and location. All responsibility is down to you and no liability will be taken for fitting it incorrectly or any damage as a result of fitting it. Good soldering skills are required to fit this SPI Flash IC, if you dont feel capable get someone suitably competent to carryout the procedure. All my items are despatched promptly which is normally same day despatch. Any questions ask away.

Blaupunkt 43/137O-WB-11B-FEGU-UK STUCK IN STANDBY? Firmware to reload via usbYou will be sent a link to download the firmware for the Blaupunkt 43/147O-WB-11B-FEGU-UK TV with screen LC430DUY-SHA1 and the main board TP.MS3463S.PB711. This doesnt have the flash ic on the main board but has a Nand ic on the back of the main board. This software will attempt to reload the contents of the Nand and should if successful give you a fully functional TV again that will reboot and start the first time installation screen. The instructions will be sent on how to use the file that will be sent to the buyer. This involves loading the supplied single file onto a usb 2 memory stick preferably less than 4gb and formatted to fat32.Unfortunately if there are other issues with the main board then this will never resolve them. So this will never rejuvenate all TVs which have other hardware issues. So you are taking a risk in it not working, however you will not cause any damage to the main board in carrying this operation out and as these boards are hard to come by then you can decide whether this is suitable. If you select local collection then the file will be uploaded to a site where you have 7days to download it before the link dies and you can collect the cd containing the instructions and the file from me in Worthing (south coast). If you select postage then a cd will be sent out to you with the file and the instructions with either 2nd class or 1st class depending on your preference as well as a download link as well. If you do not have a suitable memory stick I can provide one at extra cost with the file loaded onto it, please advise me if you wish to proceed in this respect. I would suggest keeping the file that is sent to you for future reference in case it ever happens again.Any questions ask awayAll my items are despatched promptly which is normally same day despatch.

Blaupunkt 32/148O-GB-11B-EGP-UK STUCK IN STANDBY? Firmware to reload via usbYou will be sent a link to download the firmware for the Blaupunkt 32/148O-GB-11B-EGP-UK TV with screen LC320DXJ-SFE1 and the main board TP.MS3463S.PB711. This doesnt have the flash ic on the main board but has a Nand ic on the back of the main board. This software will attempt to reload the contents of the Nand and should if successful give you a fully functional TV again that will reboot and start the first time installation screen. The instructions will be sent on how to use the file that will be sent to the buyer. This involves loading the supplied single file onto a usb 2 memory stick preferably less than 4gb and formatted to fat32.Unfortunately if there are other issues with the main board then this will never resolve them. So this will never rejuvenate all TVs which have other hardware issues. So you are taking a risk in it not working, however you will not cause any damage to the main board in carrying this operation out and as these boards are hard to come by then you can decide whether this is suitable. If you select local collection then the file will be uploaded to a site where you have 7days to download it before the link dies and you can collect the cd containing the instructions and the file from me in Worthing (south coast). If you select postage then a cd will be sent out to you with the file and the instructions with either 2nd class or 1st class depending on your preference as well as a download link as well. If you do not have a suitable memory stick I can provide one at extra cost with the file loaded onto it, please advise me if you wish to proceed in this respect. I would suggest keeping the file that is sent to you for future reference in case it ever happens again.Any questions ask awayAll my items are despatched promptly which is normally same day despatch.

STUCK IN STANDBY SPI FLASH IC UF11 FOR BLAUPUNKT 32/147I-GB-5B-HBKUP-UK TP.MSD309.BP85 PLEASE NOTE THIS ISNT THE MAIN BOARD FOR SALE BUT THE FLASH IC FOR THE MAIN BOARD!As a result of some people abusing the returns process on ebay I will no longer be selling the programmed spi flash ics for TVs as new other, they will now be sold as spares and repairs. I have had people think they are buying a new TV board for £10 and 80p delivery for first class! This I will not tolerate when they cannot be bothered to read the listing details and then ask for a return for there own incompetent mistake! I suggest you look at my feedback for the programmed spi flash ics and make your own mind up. Until ebay does something about this then this is the only way to combat this! Sorry to the majority of buyers but I am sure you will understand.If your Blaupunkt 32/147I-GB-5B-HBKUP-UK or Blaupunkt 32/147I-GB-5B-HBKUP-EU LED TV is stuck in standby or reboots constantly, continually on channel search, different colours on screen or up side down picture then the SPI Flash could have been corrupted. Simple solution replace the SPI Flash ic UF11 with the programmed chip supplied. This is suitable for the following LED sets: Blaupunkt 32inch led tv 32/147I-GB-5B-HBKUP-EU or the Blaupunkt 32/147I-GB-5B-HBKUP-UK Main Board TP.MSD309.BP85 Screen numbers suitable for this UF11 SPI Flash ic:LVW320LGDX E3 V1 or V2 and LC320DXJ-SF E1 IF YOUR SCREEN MODEL NUMBER AND TV MODEL DOESNT MATCH EXACTLY THEN PLEASE DONT PURCHASE IT! IT WILL NOT WORK OTHERWISE! Soldering skills are required to remove the spi flash from the PCB without causing damage to any of the surface mount components and to solder the supplied SPI Flash IC. All responsibility is down to you and no liability will be taken for fitting it incorrectly or any damage as a result of fitting it. Good soldering skills are required to fit this SPI Flash IC, if you dont feel capable get someone suitably competent to carry out the procedure. All my items are despatched promptly which is normally same day despatch. Any questions ask away.

service scheme  for blue point(schematics, ... - what you need to repair a device) It is an ORIGINAL !!! Good condition! By all means take me in yours favorites on! Have fun and good luck with the repair!!!service scheme  for blue point (schematics, ... - what you need to repair a device) It is an ORIGINAL !!! Good condition! By all means take me in yours favorites on! Have fun and good luck with the repair!!!

BLAUPUNKT 32/146i-GB-5B-HBKUP-UK TP.MSD309.BP85 STUCK IN STANDBY REPAIR IC UF11 PLEASE NOTE THIS ISNT THE MAIN BOARD FOR SALE BUT IT IS FOR ONE FLASH IC UF11 FOR THE MAIN BOARDAs a result of some people abusing the returns process on ebay I will no longer be selling the programmed spi flash ics for TVs as new other, they will now be sold as spares and repairs. I have had people think they are buying a new TV board for £10 and 80p delivery for first class! This I will not tolerate when they cannot be bothered to read the listing details and then ask for a return for there own incompetent mistake! I suggest you look at my feedback for the programmed spi flash ics and make your own mind up. Until ebay does something about this then this is the only way to combat this! Sorry to the majority of buyers but I am sure you will understand.If your 32/146i-GB-5B-HBKUP-UK LED Blaupunkt LED TV is stuck in standby or reboots constantly, continually on channel search, different colours on screen or up side down picture then the SPI Flash could have been corrupted. Simple solution replace SPI Flash ic UF11 with the programmed chip supplied. This is suitable for the following LED set: Blaupunkt 32inch led tv 32/146i-GB-5B-HBKUP-UK Main Board TP.MSD309.BP85 Screen numbers suitable for this SPI EPROM 32H2HD LVW320SSDX E2 V1 LVW320SSDX E2 V5 32LTD LVW320SSDX E2 V2 LVW320SSDX E2 V6 32LTDHD The label on motherboard being LSC320AN02-A IF YOUR SCREEN MODEL NUMBER AND TV MODEL DOESNT MATCH EXACTLY THEN PLEASE DONT PURCHASE IT! IT WILL NOT WORK OTHERWISE! Soldering skills are required to remove the spi flash from the PCB without causing damage to any of the surface mount components and to solder the supplied SPI Flash IC. After fitting the programmed spi flash ic you will need to carry out a First time installation ofthe TV to get all the Freeview channels for your country and location. All responsibility is down to you and no liability will be taken for fitting it incorrectly or any damage as a result of fitting it. Good soldering skills are required to fit this SPI Flash IC, if you dont feel capable get someone suitably competent to carryout the procedure. All my items are despatched promptly which is normally same day despatch. Any questions ask away.

BLAUPUNKT 32/146i-GB-5B-HKUP-UK TP.MSD309.BP85 STUCK IN STANDBY REPAIR IC UF11 PLEASE NOTE THIS ISNT THE MAIN BOARD FOR SALE BUT THE FLASH IC UF11 FOR THE MAIN BOARDAs a result of some people abusing the returns process on ebay I will no longer be selling the programmed spi flash ics for TVs as new other, they will now be sold as spares and repairs. I have had people think they are buying a new TV board for £10 and 80p delivery for first class! This I will not tolerate when they cannot be bothered to read the listing details and then ask for a return for there own incompetent mistake! I suggest you look at my feedback for the programmed spi flash ics and make your own mind up. Until ebay does something about this then this is the only way to combat this! Sorry to the majority of buyers but I am sure you will understand.If your 32/146i-GB-5B-HKUP-UK LED Blaupunkt LED TV is stuck in standby or reboots constantly, continually on channel search, different colours on screen or up side down picture then the SPI Flash could have been corrupted. Simple solution replace SPI Flash ic UF11 with the programmed chip supplied. This is suitable for the following LED set: Blaupunkt 32inch led tv 32/146i-GB-5B-HKUP-UK Main Board TP.MSD309.BP85 Screen numbers suitable for this SPI EPROMLVW320SSDX 32LTD The label on motherboard being LSC320AN02-A IF YOUR SCREEN MODEL NUMBER AND TV MODEL DOESNT MATCH EXACTLY THEN PLEASE DONT PURCHASE IT! IT WILL NOT WORK OTHERWISE! Soldering skills are required to remove the spi flash from the PCB without causing damage to any of the surface mount components and to solder the supplied SPI Flash IC. After fitting the programmed spi flash ic you will need to carry out a First time installation ofthe TV to get all the Freeview channels for your country and location.All responsibility is down to you and no liability will be taken for fitting it incorrectly or any damage as a result of fitting it. Good soldering skills are required to fit this SPI Flash IC, if you dont feel capable get someone suitably competent to carryout the procedure. If you are not in the UK and would like the programmed spi flash ic then please contact me for postage prices for your country. All my items are despatched promptly which is normally same day despatch. Any questions ask away.

Blaupunkt 32/133O-WB-11B-EGP-UK STUCK IN STANDBY? Firmware to reload via usbYou will be sent a link to download the firmware for the Blaupunkt 32/133O-WB-11B-EGP-UK TV with screen LSC320AN10 and the main board TP.MS3463S.PB711. This doesnt have the flash ic on the main board but has a Nand ic on the back of the main board. This software will attempt to reload the contents of the Nand and should if successful give you a fully functional TV again that will reboot and start the first time installation screen. The instructions will be sent on how to use the file that will be sent to the buyer. This involves loading the supplied single file onto a usb 2 memory stick preferably less than 4gb and formatted to fat32.Unfortunately if there are other issues with the main board then this will never resolve them. So this will never rejuvenate all TVs which have other hardware issues. So you are taking a risk in it not working, however you will not cause any damage to the main board in carrying this operation out and as these boards are hard to come by then you can decide whether this is suitable. If you select local collection then the file will be uploaded to a site where you have 7days to download it before the link dies and you can collect the cd containing the instructions and the file from me in Worthing (south coast). If you select postage then a cd will be sent out to you with the file and the instructions with either 2nd class or 1st class depending on your preference as well as a download link as well. If you do not have a suitable memory stick I can provide one at extra cost with the file loaded onto it, please advise me if you wish to proceed in this respect. I would suggest keeping the file that is sent to you for future reference in case it ever happens again.Any questions ask awayAll my items are despatched promptly which is normally same day despatch.

Blaupunkt 43/137O-WB-11B-FEGU-UK STUCK IN STANDBY? Firmware to reload via usbYou will be sent a link to download the firmware for the Blaupunkt 43/147O-WB-11B-FEGU-UK TV with screen LC430DUY-SHA1 and the main board TP.MS3463S.PB711. This doesnt have the flash ic on the main board but has a Nand ic on the back of the main board. This software will attempt to reload the contents of the Nand and should if successful give you a fully functional TV again that will reboot and start the first time installation screen. The instructions will be sent on how to use the file that will be sent to the buyer. This involves loading the supplied single file onto a usb 2 memory stick preferably less than 4gb and formatted to fat32.Unfortunately if there are other issues with the main board then this will never resolve them. So this will never rejuvenate all TVs which have other hardware issues. So you are taking a risk in it not working, however you will not cause any damage to the main board in carrying this operation out and as these boards are hard to come by then you can decide whether this is suitable. If you select local collection then the file will be uploaded to a site where you have 7days to download it before the link dies and you can collect the cd containing the instructions and the file from me in Worthing (south coast). If you select postage then a cd will be sent out to you with the file and the instructions with either 2nd class or 1st class depending on your preference as well as a download link as well. If you do not have a suitable memory stick I can provide one at extra cost with the file loaded onto it, please advise me if you wish to proceed in this respect. I would suggest keeping the file that is sent to you for future reference in case it ever happens again.Any questions ask awayAll my items are despatched promptly which is normally same day despatch.

BLAUPUNKT 39/224I-GB-5B-FHBKUP-UK TP.MSD309.BP85 C12415 STUCK IN STANDBY REPAIR IC UF11 PLEASE NOTE THIS ISNT THE MAIN BOARD FOR SALE BUT IT IS FOR ONE FLASH IC UF11 FOR THE MAIN BOARDAs a result of some people abusing the returns process on ebay I will no longer be selling the programmed spi flash ics for TVs as new other, they will now be sold as spares and repairs. I have had people think they are buying a new TV board for £10 and 80p delivery for first class! This I will not tolerate when they cannot be bothered to read the listing details and then ask for a return for there own incompetent mistake! I suggest you look at my feedback for the programmed spi flash ics and make your own mind up. Until ebay does something about this then this is the only way to combat this! Sorry to the majority of buyers but I am sure you will understand.If your Blaupunkt 39/224I-GB-5B-FHBKUP-UK LED TV is stuck in standby or reboots constantly, continually on channel search, different colours on screen or up side down picture then the SPI Flash could have been corrupted. Simple solution replace SPI Flash ic UF11 with the programmed chip supplied. This is suitable for the following LED sets: Blaupunkt 39inch led tv 39/224I-GB-5B-FHBKUP-UK or Blaupunkt 39/224I-GB-5B-FHBKUP-EU Main Board TP.MSD309.BP85 C12415 Screen number suitable for this SPI FLASH EPROM V390HJ1-LE1 IF YOUR SCREEN MODEL NUMBER AND TV MODEL DOESNT MATCH EXACTLY THEN PLEASE DONT PURCHASE IT! IT WILL NOT WORK OTHERWISE! Soldering skills are required to remove the spi flash from the PCB without causing damage to any of the surface mount components and to solder the supplied SPI Flash IC. After fitting the programmed spi flash ic you will need to carry out a First time installation of the TV to get all the Freeview channels for your country and location. All responsibility is down to you and no liability will be taken for fitting it incorrectly or any damage as a result of fitting it. Good soldering skills are required to fit this SPI Flash IC, if you dont feel capable get someone suitably competent to carryout the procedure. All my items are despatched promptly which is normally same day despatch. Any questions ask away.

Blaupunkt 49/148O-GB-11B-FGU-UK STUCK IN STANDBY? Firmware to reload via usb You will be sent a link to download the firmware for the Blaupunkt 49/148O-GB-11B-EGP-UK TV with screen LC490DUY SHA1 and the main board T.MS3463S.711. This doesnt have the flash ic on the main board but has a Nand ic on the back of the main board. This software will attempt to reload the contents of the Nand and should if successful give you a fully functional TV again that will reboot and start the first time installation screen. The instructions will be sent on how to use the file that will be sent to the buyer. This involves loading the supplied single file onto a usb 2 memory stick preferably less than 4gb and formatted to fat32.Unfortunately if there are other issues with the main board then this will never resolve them. So this will never rejuvenate all TVs which have other hardware issues. So you are taking a risk in it not working, however you will not cause any damage to the main board in carrying this operation out and as these boards are hard to come by then you can decide whether this is suitable. If you select local collection then the file will be uploaded to a site with the instructions where you have 7days to download it before the link dies and if you wish to you can collect the CD from me. If you select postage then a cd will be sent out to you with the file and instructions with either 2nd class or first class depending on your preference. If you do not have a suitable memory stick I can provide one at extra cost with the file loaded onto it, please advise me if you wish to proceed in this respect. I would suggest keeping the file that is sent to you for future reference in case it ever happens again.Any questions ask awayAll my items are despatched promptly which is normally same day despatch.

BLAUPUNKT 39/210I-GB-5B-FHBCUP-UK TP.MSD309.BP85 C12415 STUCK IN STANDBY REPAIR IC UF11 PLEASE NOTE THIS ISNT THE MAIN BOARD FOR SALE BUT IT IS FOR ONE FLASH IC UF11 FOR THE MAIN BOARDAs a result of some people abusing the returns process on ebay I will no longer be selling the programmed spi flash ics for TVs as new other, they will now be sold as spares and repairs. I have had people think they are buying a new TV board for £10 and 80p delivery for first class! This I will not tolerate when they cannot be bothered to read the listing details and then ask for a return for there own incompetent mistake! I suggest you look at my feedback for the programmed spi flash ics and make your own mind up. Until ebay does something about this then this is the only way to combat this! Sorry to the majority of buyers but I am sure you will understand.If your Blaupunkt 39/210I-GB-5B-FHBCUP-UK LED TV is stuck in standby or reboots constantly, continually on channel search, different colours on screen or up side down picture then the SPI Flash could have been corrupted. Simple solution replace SPI Flash ic UF11 with the programmed chip supplied. This is suitable for the following LED sets: Blaupunkt 39inch led tv 39/210I-GB-5B-FHBCUP-UK or Blaupunkt 39/210I-GB-5B-FHBCUP-EU Main Board TP.MSD309.BP85 C12415 Screen number suitable for this SPI FLASH EPROM V390HJ1-LE1 IF YOUR SCREEN MODEL NUMBER AND TV MODEL DOESNT MATCH EXACTLY THEN PLEASE DONT PURCHASE IT! IT WILL NOT WORK OTHERWISE! Soldering skills are required to remove the spi flash from the PCB without causing damage to any of the surface mount components and to solder the supplied SPI Flash IC. After fitting the programmed spi flash ic you will need to carry out a First time installation of the TV to get all the Freeview channels for your country and location. All responsibility is down to you and no liability will be taken for fitting it incorrectly or any damage as a result of fitting it. As a bonus you will also be provided a download link and instructions for loading the correct software onto a usb 2.0 memory stick of your own that can if your lucky reload the firmware back onto the flash ic without removal of the flash ic. This doesnt always work but certainly worth a try. Good soldering skills are required to fit this SPI Flash IC, if you dont feel capable get someone suitably competent to carryout the procedure. If you are not in the UK and would like the programmed spi flash ic then please contact me for postage prices for your country. All my items are despatched promptly which is normally same day despatch. Any questions ask away.

BLAUPUNKT 39/210I-GB-5B-FHBCUP-UK TP.MSD309.BP85 C12415 STUCK IN STANDBY REPAIR IC UF11 PLEASE NOTE THIS ISNT THE MAIN BOARD FOR SALE BUT IT IS FOR ONE FLASH IC UF11 FOR THE MAIN BOARDAs a result of some people abusing the returns process on ebay I will no longer be selling the programmed spi flash ics for TVs as new other, they will now be sold as spares and repairs. I have had people think they are buying a new TV board for £10 and 80p delivery for first class! This I will not tolerate when they cannot be bothered to read the listing details and then ask for a return for there own incompetent mistake! I suggest you look at my feedback for the programmed spi flash ics and make your own mind up. Until ebay does something about this then this is the only way to combat this! Sorry to the majority of buyers but I am sure you will understand.If your Blaupunkt 39/210I-GB-5B-FHBCUP-UK LED TV is stuck in standby or reboots constantly, continually on channel search, different colours on screen or up side down picture then the SPI Flash could have been corrupted. Simple solution replace SPI Flash ic UF11 with the programmed chip supplied. This is suitable for the following LED sets: Blaupunkt 39inch led tv 39/210I-GB-5B-FHBCUP-UK or Blaupunkt 39/210I-GB-5B-FHBCUP-EU Main Board TP.MSD309.BP85 C12415 Screen number suitable for this SPI FLASH EPROM V390HJ1-LE1 IF YOUR SCREEN MODEL NUMBER AND TV MODEL DOESNT MATCH EXACTLY THEN PLEASE DONT PURCHASE IT! IT WILL NOT WORK OTHERWISE! Soldering skills are required to remove the spi flash from the PCB without causing damage to any of the surface mount components and to solder the supplied SPI Flash IC. After fitting the programmed spi flash ic you will need to carry out a First time installation of the TV to get all the Freeview channels for your country and location. All responsibility is down to you and no liability will be taken for fitting it incorrectly or any damage as a result of fitting it. As a bonus you will also be provided a download link and instructions for loading the correct software onto a usb 2.0 memory stick of your own that can if your lucky reload the firmware back onto the flash ic without removal of the flash ic. This doesnt always work but certainly worth a try. Good soldering skills are required to fit this SPI Flash IC, if you dont feel capable get someone suitably competent to carryout the procedure. If you are not in the UK and would like the programmed spi flash ic then please contact me for postage prices for your country. All my items are despatched promptly which is normally same day despatch. Any questions ask away.

Blaupunkt 32/148O-GB-11B-EGP-UK STUCK IN STANDBY? Firmware to reload via usbYou will be sent a link to download the firmware for the Blaupunkt 32/148O-GB-11B-EGP-UK TV with screen LC320DXJ-SFE1 and the main board TP.MS3463S.PB711. This doesnt have the flash ic on the main board but has a Nand ic on the back of the main board. This software will attempt to reload the contents of the Nand and should if successful give you a fully functional TV again that will reboot and start the first time installation screen. The instructions will be sent on how to use the file that will be sent to the buyer. This involves loading the supplied single file onto a usb 2 memory stick preferably less than 4gb and formatted to fat32.Unfortunately if there are other issues with the main board then this will never resolve them. So this will never rejuvenate all TVs which have other hardware issues. So you are taking a risk in it not working, however you will not cause any damage to the main board in carrying this operation out and as these boards are hard to come by then you can decide whether this is suitable. If you select local collection then the file will be uploaded to a site where you have 7days to download it before the link dies and you can collect the cd containing the instructions and the file from me in Worthing (south coast). If you select postage then a cd will be sent out to you with the file and the instructions with either 2nd class or 1st class depending on your preference as well as a download link as well. If you do not have a suitable memory stick I can provide one at extra cost with the file loaded onto it, please advise me if you wish to proceed in this respect. I would suggest keeping the file that is sent to you for future reference in case it ever happens again.Any questions ask awayAll my items are despatched promptly which is normally same day despatch.

Blaupunkt wireless rechargeable speaker NFCBT11.