The listing is for one piece of genuine B&W speaker rear bass hole bung. It has some cuts but does its job as it should. It will fit to any speaker with 35-40mm inverter hole. Bung is around 40mm in diameter and 45mm in length. It will change the sound of a speaker. Bunged it will sound faster as it makes the drivers push harder. Will dispatch quick and free of charge or you are welcome to collect.

The listing is for one piece of genuine B&W speaker rear bass hole bung. It has some cuts but does its job as it should. It will fit to any speaker with 35-40mm inverter hole. Bung is around 40mm in diameter and 45mm in length. It will change the sound of a speaker. Bunged it will sound faster as it makes the drivers push harder. Will dispatch quick and free of charge or you are welcome to collect.

1 Pair Bowers & Wilkins FPM2 Flat Panel Monitor Surround Speakers. Wall Mounts included for each speaker. This is for local pickup only. We do not have the original cartons and do not want to risk shipping damage. Ohio sales tax will be collected at pickup. Audible Elegance is your Audio, Video, and Home Theater Dealer in Cincinnati Ohio, Northern Kentucky and Eastern Indiana featuring many fine products in a home-like and friendly atmosphere.

The listing is for one piece of genuine B&W speaker rear bass hole bung. It is a very good condition. It will change the sound of a speaker. Bunged it will sound faster as it makes the drivers push harder. Will dispatch quick and free of charge or you are welcome to collect.

You are buying a Pair of Bowers & Wilkins FPM5 120W/8ohm B&W On-Wall Speakers PAIR Tested!! Both speakers come with wall bracket as pictured About cosmetic condition they show some normal wear Price is for both speakers Pictures are part of the description so please see them carefully and make your own conclusion about the item’s WHAT YOU SEE IS WHAT YOU GET Thanks for looking selling as the pictures shown. ABOUT SHIPPING Shipping Within US 48 Continental States Only (No shipping to Puerto Rico, Alaska, Hawaii) will be shipped by Fedex UPS Or USPS Ground according your location with free tracking number and It will be shipped thru the address provided by eBay so please make sure it's right during checkout! Feel free to any questions. NOT SHIPPING TO P.O BOX ADDRESSES For International buyer we will use eBay Global shipping option no exceptions. ABOUT RETURN Please contact seller if you have any inconvenience with your item, before open an eBay case or leave a negative feedback (There are many ways to solve any issue) Is very important for Us make our costumers happy’s. Buy with confidence. ?????TOP SELLER ????? • See other items in our eBay page!!! https://www.ebay.com/str/jarvingracestore

3 enceintes B&W Modèle FPM5 Bowers & Wilkins 2 grands pied et 1 petit : hauteur : 132,5 et 725,5 cmVendu sans filFonctionne bien , objet doccasion supportant divers sauts ou éclats sur les cadres et supports , usure de lesthètique ...

Bowers & Wilkins B&W FPM2 Flat Panel Surround Speakers Pair. These speakers work and sound great, honestly do not want to sell them but have to many electronics. Condition is good but some light wear from storage. Speakers only, no mount. Smoke free home. I took plenty of pictures so please view them all. For any questions please ask, thank you for looking.

B&W Bowers & Wilkins FPM4, 5, 6, Table Stand With Adapter. Upgrade Sound system and no need speaker and this stand any more, willing to sell! Genuine B&W Bowers & Wilkins table stand for FPM4, 5, 6. Come with straight Stand position adapter, please check all pictures and it is actual item. Heavy duty, 6.5kg (14.5lb). Over all in like new condition. **** Speaker just show how the adapter works and NOT include with this sale***** Super rare and hard to find nowadays! $99.99 Fast shipping from Ontario Canada with tracking number and insurance! Within Canada: $30 To USA: $40 Will disassemble it when ship to new owner, will pack it well!

3 enceintes B&W Modèle FPM5 Bowers & Wilkins 2 grands pied et 1 petit : hauteur : 132,5 et 725,5 cmVendu sans filFonctionne bien , objet doccasion supportant divers sauts ou éclats sur les cadres et supports , usure de lesthètique ...

B&W Bowers & Wilkins FPM4, 5, 6, Table Stand With centre Adapter. Upgrade Sound system and no need speaker and this stand any more, willing to sell! Genuine B&W Bowers & Wilkins table stand for FPM4, 5, 6. Come with Centre Channel Stand position adapter, please check all pictures and it is actual item. Heavy duty, 6.5kg (14.5lb). Over all in like new condition. **** Speaker just show how the adapter works and NOT include with this sale***** Super rare and hard to find nowadays! $99.99 Fast shipping from Ontario Canada with tracking number and insurance! Within Canada: $30 To USA: $40 Will disassemble it when ship to new owner, will pack it well!

3 enceintes B&W Modèle FPM5 Bowers & Wilkins 2 grands pied et 1 petit : hauteur : 132,5 et 725,5 cmVendu sans filFonctionne bien , objet doccasion supportant divers sauts ou éclats sur les cadres et supports , usure de lesthètique ...

Superb condition and Quality Bowers and Wilkins (B&W) FPM2 Speakers (Pair) 100w 8 ohm. These speakers have been hardly used since purchased from new from Audio Counsel for almost £500 over 10 years ago and are in beautiful boxed condition with most of the original packaging. They are heavy, well made ultra compact flat-panel (FP) speakers, featuring a Nautilus tweeter (alloy dome) and 4in Kevlar cone bass/midrange drive units. Dimensions are H 259mm x W 170mm x D 102mm including wall plate.Full technical specs are as per one of the photos. They can be either wall hung (on plates provided + template) or free standing (with provided stands). These wall plates and stands are as shown in one of the photos. Excellent convenient size coupled with superb sound. I would prefer that the buyer collects so that I can demonstrate the sound of the speakers coupled with a hi-fi system, and for the buyer to assess the condition personally. Collection only and payment by cash or cleared bank transfer. This listing is for the PAIR not individual items. Thanks for looking and please feel free to ask questions.

2 x Bowers Wilkins FPM5 After Market Nautilus Replacement Tweeter Coils Foils.Always fit in pairs, that way they will look exactly the same & they will also sound exactly the same.For the Avoidance of any Doubt, these are After Market Generic Replacement Bowers & Wilkins Nautilus Tweeter Coils Foils.They are a very good replacement for your old blown or dented Nautilus Tweeters.BEFORE you first open the Tweeter up make sure that you mark the Position of both parts of the Tweeter, they slot together in a certain place & marking them before opening them will save you loads of time & agro later on.You will need the following tools to fit these.A Very Small Philips Screwdriver.A Very Small Flathead Screwdriver.A Soldering Iron + Solder.Some Superglug & a Cotton Dud.Most will Slot into place without the need of any Superglug, there are a Few that will need a Tiny Amount of it to Fix into Place correctly.Wire Connections: They will only Fit in One Direction, just use Common Sense when Fitting into Place, you do Not need to attempt to Wire them in any other way that what should be 100% Logical.Please Note: These many Look Very Similar to the Standard Bowers & Wilkins Coils - Foils that we Sell, they are NOT the Same.There is a Size Difference of Less than 1mm, Meaning they are NOT Interchangeable, there are also Differences in the Specifications of them.You will need a Steady Hand, a Fair Degree of Common Sense (like do not Glue into Place until you have made sure it Fits together correctly) & a Few Minutes spare time when Fitting these.REMEMBER, THEY ARE VERY DELICATE, NO RETURNS ON ANY COILS - FOILS THAT YOU DAMAGE WHILST FITTING THEM.RETURNS ON BRAND NEW NOT FITTED COILS - FOILS ONLY.If you are not still not sure about fitting these, in the first instance have a look on Youtube, you will be able to find videos on there showing what to do.If you still have issues, then send an email through eBay messaging to us, we will attempt to get back to you within 24hrs (we are NOT sat on the computer 24/7)FREE UK SHIPPING ON THIS ITEM.All items are sent by signed for & recorded delivery.

2 x Bowers Wilkins FPM4 After Market Nautilus Replacement Tweeter Coils Foils.Always fit in pairs, that way they will look exactly the same & they will also sound exactly the same.For the Avoidance of any Doubt, these are After Market Generic Replacement Bowers & Wilkins Nautilus Tweeter Coils Foils.They are a very good replacement for your old blown or dented Nautilus Tweeters.BEFORE you first open the Tweeter up make sure that you mark the Position of both parts of the Tweeter, they slot together in a certain place & marking them before opening them will save you loads of time & agro later on.You will need the following tools to fit these.A Very Small Philips Screwdriver.A Very Small Flathead Screwdriver.A Soldering Iron + Solder.Some Superglug & a Cotton Dud.Most will Slot into place without the need of any Superglug, there are a Few that will need a Tiny Amount of it to Fix into Place correctly.Wire Connections: They will only Fit in One Direction, just use Common Sense when Fitting into Place, you do Not need to attempt to Wire them in any other way that what should be 100% Logical.Please Note: These many Look Very Similar to the Standard Bowers & Wilkins Coils - Foils that we Sell, they are NOT the Same.There is a Size Difference of Less than 1mm, Meaning they are NOT Interchangeable, there are also Differences in the Specifications of them.You will need a Steady Hand, a Fair Degree of Common Sense (like do not Glue into Place until you have made sure it Fits together correctly) & a Few Minutes spare time when Fitting these.REMEMBER, THEY ARE VERY DELICATE, NO RETURNS ON ANY COILS - FOILS THAT YOU DAMAGE WHILST FITTING THEM.RETURNS ON BRAND NEW NOT FITTED COILS - FOILS ONLY.If you are not still not sure about fitting these, in the first instance have a look on Youtube, you will be able to find videos on there showing what to do.If you still have issues, then send an email through eBay messaging to us, we will attempt to get back to you within 24hrs (we are NOT sat on the computer 24/7)FREE UK SHIPPING ON THIS ITEM.All items are sent by signed for & recorded delivery.

2 x Bowers Wilkins FPM6 After Market Nautilus Replacement Tweeter Coils Foils.Always fit in pairs, that way they will look exactly the same & they will also sound exactly the same.For the Avoidance of any Doubt, these are After Market Generic Replacement Bowers & Wilkins Nautilus Tweeter Coils Foils.They are a very good replacement for your old blown or dented Nautilus Tweeters.BEFORE you first open the Tweeter up make sure that you mark the Position of both parts of the Tweeter, they slot together in a certain place & marking them before opening them will save you loads of time & agro later on.You will need the following tools to fit these.A Very Small Philips Screwdriver.A Very Small Flathead Screwdriver.A Soldering Iron + Solder.Some Superglug & a Cotton Dud.Most will Slot into place without the need of any Superglug, there are a Few that will need a Tiny Amount of it to Fix into Place correctly.Wire Connections: They will only Fit in One Direction, just use Common Sense when Fitting into Place, you do Not need to attempt to Wire them in any other way that what should be 100% Logical.Please Note: These many Look Very Similar to the Standard Bowers & Wilkins Coils - Foils that we Sell, they are NOT the Same.There is a Size Difference of Less than 1mm, Meaning they are NOT Interchangeable, there are also Differences in the Specifications of them.You will need a Steady Hand, a Fair Degree of Common Sense (like do not Glue into Place until you have made sure it Fits together correctly) & a Few Minutes spare time when Fitting these.REMEMBER, THEY ARE VERY DELICATE, NO RETURNS ON ANY COILS - FOILS THAT YOU DAMAGE WHILST FITTING THEM.RETURNS ON BRAND NEW NOT FITTED COILS - FOILS ONLY.If you are not still not sure about fitting these, in the first instance have a look on Youtube, you will be able to find videos on there showing what to do.If you still have issues, then send an email through eBay messaging to us, we will attempt to get back to you within 24hrs (we are NOT sat on the computer 24/7)FREE UK SHIPPING ON THIS ITEM.All items are sent by signed for & recorded delivery.

FOR SALE 2X FLOOR STANDS FOR BOWERS & WILKINS FPM5 SPEAKERS. THESE ARE IN USED CONDITION BUT STILL PRESENTABLE (PLEASE SEE DETAILED PICS) Bowers & Wilkins FS-FPM Floor Stand is designed specifically for the Bowers & Wilkins FPM4 and FPM5 flat panel speakers, this elegant matching floor stand raises the speakers to the correct listening height and provides a stable, rigid support. CASH ON COLLECTION

FOR SALE 2X FLOOR STANDS FOR BOWERS & WILKINS FPM5 SPEAKERS. THESE ARE IN USED CONDITION BUT STILL PRESENTABLE (PLEASE SEE DETAILED PICS) Bowers & Wilkins FS-FPM Floor Stand is designed specifically for the Bowers & Wilkins FPM4 and FPM5 flat panel speakers, this elegant matching floor stand raises the speakers to the correct listening height and provides a stable, rigid support. CASH ON COLLECTION

2 x Bowers Wilkins FPM4 After Market Nautilus Replacement Tweeter Coils Foils.Always fit in pairs, that way they will look exactly the same & they will also sound exactly the same.For the Avoidance of any Doubt, these are After Market Generic Replacement Bowers & Wilkins Nautilus Tweeter Coils Foils.They are a very good replacement for your old blown or dented Nautilus Tweeters.BEFORE you first open the Tweeter up make sure that you mark the Position of both parts of the Tweeter, they slot together in a certain place & marking them before opening them will save you loads of time & agro later on.You will need the following tools to fit these.A Very Small Philips Screwdriver.A Very Small Flathead Screwdriver.A Soldering Iron + Solder.Some Superglug & a Cotton Dud.Most will Slot into place without the need of any Superglug, there are a Few that will need a Tiny Amount of it to Fix into Place correctly.Wire Connections: They will only Fit in One Direction, just use Common Sense when Fitting into Place, you do Not need to attempt to Wire them in any other way that what should be 100% Logical.Please Note: These many Look Very Similar to the Standard Bowers & Wilkins Coils - Foils that we Sell, they are NOT the Same.There is a Size Difference of Less than 1mm, Meaning they are NOT Interchangeable, there are also Differences in the Specifications of them.You will need a Steady Hand, a Fair Degree of Common Sense (like do not Glue into Place until you have made sure it Fits together correctly) & a Few Minutes spare time when Fitting these.REMEMBER, THEY ARE VERY DELICATE, NO RETURNS ON ANY COILS - FOILS THAT YOU DAMAGE WHILST FITTING THEM.RETURNS ON BRAND NEW NOT FITTED COILS - FOILS ONLY.If you are not still not sure about fitting these, in the first instance have a look on Youtube, you will be able to find videos on there showing what to do.If you still have issues, then send an email through eBay messaging to us, we will attempt to get back to you within 24hrs (we are NOT sat on the computer 24/7)FREE UK SHIPPING ON THIS ITEM.All items are sent by signed for & recorded delivery.

2 x Bowers Wilkins FPM5 After Market Nautilus Replacement Tweeter Coils Foils.Always fit in pairs, that way they will look exactly the same & they will also sound exactly the same.For the Avoidance of any Doubt, these are After Market Generic Replacement Bowers & Wilkins Nautilus Tweeter Coils Foils.They are a very good replacement for your old blown or dented Nautilus Tweeters.BEFORE you first open the Tweeter up make sure that you mark the Position of both parts of the Tweeter, they slot together in a certain place & marking them before opening them will save you loads of time & agro later on.You will need the following tools to fit these.A Very Small Philips Screwdriver.A Very Small Flathead Screwdriver.A Soldering Iron + Solder.Some Superglug & a Cotton Dud.Most will Slot into place without the need of any Superglug, there are a Few that will need a Tiny Amount of it to Fix into Place correctly.Wire Connections: They will only Fit in One Direction, just use Common Sense when Fitting into Place, you do Not need to attempt to Wire them in any other way that what should be 100% Logical.Please Note: These many Look Very Similar to the Standard Bowers & Wilkins Coils - Foils that we Sell, they are NOT the Same.There is a Size Difference of Less than 1mm, Meaning they are NOT Interchangeable, there are also Differences in the Specifications of them.You will need a Steady Hand, a Fair Degree of Common Sense (like do not Glue into Place until you have made sure it Fits together correctly) & a Few Minutes spare time when Fitting these.REMEMBER, THEY ARE VERY DELICATE, NO RETURNS ON ANY COILS - FOILS THAT YOU DAMAGE WHILST FITTING THEM.RETURNS ON BRAND NEW NOT FITTED COILS - FOILS ONLY.If you are not still not sure about fitting these, in the first instance have a look on Youtube, you will be able to find videos on there showing what to do.If you still have issues, then send an email through eBay messaging to us, we will attempt to get back to you within 24hrs (we are NOT sat on the computer 24/7)FREE UK SHIPPING ON THIS ITEM.All items are sent by signed for & recorded delivery.

2 x Bowers Wilkins FPM6 After Market Nautilus Replacement Tweeter Coils Foils.Always fit in pairs, that way they will look exactly the same & they will also sound exactly the same.For the Avoidance of any Doubt, these are After Market Generic Replacement Bowers & Wilkins Nautilus Tweeter Coils Foils.They are a very good replacement for your old blown or dented Nautilus Tweeters.BEFORE you first open the Tweeter up make sure that you mark the Position of both parts of the Tweeter, they slot together in a certain place & marking them before opening them will save you loads of time & agro later on.You will need the following tools to fit these.A Very Small Philips Screwdriver.A Very Small Flathead Screwdriver.A Soldering Iron + Solder.Some Superglug & a Cotton Dud.Most will Slot into place without the need of any Superglug, there are a Few that will need a Tiny Amount of it to Fix into Place correctly.Wire Connections: They will only Fit in One Direction, just use Common Sense when Fitting into Place, you do Not need to attempt to Wire them in any other way that what should be 100% Logical.Please Note: These many Look Very Similar to the Standard Bowers & Wilkins Coils - Foils that we Sell, they are NOT the Same.There is a Size Difference of Less than 1mm, Meaning they are NOT Interchangeable, there are also Differences in the Specifications of them.You will need a Steady Hand, a Fair Degree of Common Sense (like do not Glue into Place until you have made sure it Fits together correctly) & a Few Minutes spare time when Fitting these.REMEMBER, THEY ARE VERY DELICATE, NO RETURNS ON ANY COILS - FOILS THAT YOU DAMAGE WHILST FITTING THEM.RETURNS ON BRAND NEW NOT FITTED COILS - FOILS ONLY.If you are not still not sure about fitting these, in the first instance have a look on Youtube, you will be able to find videos on there showing what to do.If you still have issues, then send an email through eBay messaging to us, we will attempt to get back to you within 24hrs (we are NOT sat on the computer 24/7)FREE UK SHIPPING ON THIS ITEM.All items are sent by signed for & recorded delivery.