Top of the of line when made, Burson Conductor SL-HA-160SL Headphone amp. It comes with original box, packing and power cord. It was upgraded by Parts Connection as there is a label on the bottom. It has the very sweet sounding and musical Burr Brown PCM Multi bit 1793 option. It was quality made and designed in Australia. Parts Connection modifications consisted of some upgraded parts and changing the pre-out from fixed to variable. The USB interface does not work and did not work when I purchased it as it was non issue in my system. Everything else works as it should. The Burson gear is known for its excellent design, craftsmanship, parts quality, fit, finish, sound quality and performance. It sounds very nice, open, detailed, dynamic, involving, smooth, transparent and very musical. It is powerful(2 watts RMS per channel-Class A) and drove all of my headphones easily. It uses gold plated input/output heavy duty jacks, and has an IEC AC input and comes with power cord. It was $1700 retail. It has been well cared for and always in a non smoking climate controlled environment. There are some small scratches on top, nothing serious at all. Buy with confidence, see my feedback. Good listening, SonnY :) See impressive specs below: Max Output Power @ 8 Ohm : 2W ; VOS Output Stage : 2 Levels / DAC Out : NoPre-Amp Out : No ; RCA input set : 1 ; Volume Control : ALPS PotsEnclosure : 2mm Folded Aluminum ; Stocked DAC PCB : PCM1793 ;DAC Spec: 24bit 192KDAC DNR: 113 db

I’m selling my Burson headphone amp/dac because i got some more stuff and just need to clear out some things I don’t use much anymore. The headphone amp section works beautifully, as did the inputs on the back when I hooked some stuff up to it. I do need to mention that the dac doesn’t seem to work on newer computers. My laptop did recognize it when I hooked it up, but the music was skipping so much that it was unusable. So I wouldn’t recommend using the dac with a newer laptop(it worked fine on my older one) Thanks for looking and message me with any questions you may have.

Top of the of line when made, Burson Conductor SL-HA-160SL Headphone amp. It comes with original box, packing and power cord. It was upgraded by Parts Connection as there is a label on the bottom. It has the very sweet sounding and musical Burr Brown PCM Multi bit 1793 option. It was quality made and designed in Australia. Parts Connection modifications consisted of some upgraded parts and changing the pre-out from fixed to variable. The USB interface does not work and did not work when I purchased it as it was non issue in my system. Everything else works as it should. The Burson gear is known for its excellent design, craftsmanship, parts quality, fit, finish, sound quality and performance. It sounds very nice, open, detailed, dynamic, involving, smooth, transparent and very musical. It is powerful(2 watts RMS per channel-Class A) and drove all of my headphones easily. It uses gold plated input/output heavy duty jacks, and has an IEC AC input and comes with power cord. It was $1700 retail. It has been well cared for and always in a non smoking climate controlled environment. There are some small scratches on top, nothing serious at all. Buy with confidence, see my feedback. Good listening, SonnY :) See impressive specs below: Max Output Power @ 8 Ohm : 2W ; VOS Output Stage : 2 Levels / DAC Out : NoPre-Amp Out : No ; RCA input set : 1 ; Volume Control : ALPS PotsEnclosure : 2mm Folded Aluminum ; Stocked DAC PCB : PCM1793 ;DAC Spec: 24bit 192KDAC DNR: 113 db

Top of the of line when made, Burson Conductor SL-HA-160SL Headphone amp. It comes with original box, packing and power cord. It was upgraded by Parts Connection as there is a label on the bottom. It has the very sweet sounding and musical Burr Brown PCM Multi bit 1793 option. It was quality made and designed in Australia. Parts Connection modifications consisted of some upgraded parts and changing the pre-out from fixed to variable. The USB interface does not work and did not work when I purchased it as it was non issue in my system. Everything else works as it should. The Burson gear is known for its excellent design, craftsmanship, parts quality, fit, finish, sound quality and performance. It sounds very nice, open, detailed, dynamic, involving, smooth, transparent and very musical. It is powerful(2 watts RMS per channel-Class A) and drove all of my headphones easily. It uses gold plated input/output heavy duty jacks, and has an IEC AC input and comes with power cord. It was $1700 retail. It has been well cared for and always in a non smoking climate controlled environment. There are some small scratches on top, nothing serious at all. Buy with confidence, see my feedback. Good listening, SonnY :) See impressive specs below: Max Output Power @ 8 Ohm : 2W ; VOS Output Stage : 2 Levels / DAC Out : NoPre-Amp Out : No ; RCA input set : 1 ; Volume Control : ALPS PotsEnclosure : 2mm Folded Aluminum ; Stocked DAC PCB : PCM1793 ;DAC Spec: 24bit 192KDAC DNR: 113 db

Top of the of line when made, Burson Conductor SL-HA-160SL Headphone amp. It comes with original box, packing and power cord. It was upgraded by Parts Connection as there is a label on the bottom. It has the very sweet sounding and musical Burr Brown PCM Multi bit 1793 option. It was quality made and designed in Australia. Parts Connection modifications consisted of some upgraded parts and changing the pre-out from fixed to variable. The USB interface does not work and did not work when I purchased it as it was non issue in my system. Everything else works as it should. The Burson gear is known for its excellent design, craftsmanship, parts quality, fit, finish, sound quality and performance. It sounds very nice, open, detailed, dynamic, involving, smooth, transparent and very musical. It is powerful(2 watts RMS per channel-Class A) and drove all of my headphones easily. It uses gold plated input/output heavy duty jacks, and has an IEC AC input and comes with power cord. It was $1700 retail. It has been well cared for and always in a non smoking climate controlled environment. There are some small scratches on top, nothing serious at all. Buy with confidence, see my feedback. Good listening, SonnY :) See impressive specs below: Max Output Power @ 8 Ohm : 2W ; VOS Output Stage : 2 Levels / DAC Out : NoPre-Amp Out : No ; RCA input set : 1 ; Volume Control : ALPS PotsEnclosure : 2mm Folded Aluminum ; Stocked DAC PCB : PCM1793 ;DAC Spec: 24bit 192KDAC DNR: 113 db

DescriptionOperation verified.Please check photos for condition.Shipping Fedex,DHL,Japan Post *For FedEx / DHL shipping items, a person residing in the remote area will have to pay an additional shipping fee.International Buyers - Please Note:Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Thank you for your understanding.Read more... Conditions shown here are based on our standard.Please understand that the conditions of used items that have been stored in our warehouse changes by time.Listings that shows Working means that it confirmed working when we stored items in our warehouse, some items might stop working during the shipment or after delivery to you.(We double check if they are working before shipping them out) Pre-owned(used) items are used items, so please purchase if you acknowledge it.

Working unit Sounds great Light wear marks on top of the unit Power cable included

Burson Conductor SL Headphone Amplifier and DAC with the Sabre 9018 dac chip. In good used condition, case has some scratches but works perfectly. Comes with all cables and original box. This was Bursons top dac/amp back in the day. The amp has a ton of power and the dac has a very natural and balanced sound signature. Ive had this for quite a few years now but Im upgrading to one of the newer models.