Chord Company Signature Speaker Cable 2.5m Factory Terminated. In great condition includes original packaging.

Chord Company Signature Speaker Cables 2 x 2.5m Pair Factory Terminated. In great condition includes original links and packaging.

Chord Company Signature Speaker Cables 2 meters Pair. The cables is in very good condition with original Chord Company bag. See all the photos attached for details. -Chord Signature Speaker Cable - Product Description Fitting Chord Signature speaker cable to your system will come as quite a shock. You will find it hard to believe just how much noise your previous speaker cable was allowing to get in the way of the sound. You will be able to hear very fine and delicate detail that will sound unforced and natural. There will be more space around individual voices and instruments. No matter how complex the music, you will be able to pick out individual instruments. Tonally, the cable is neutral and will portray the very subtle dynamic changes that are so vital to music reproduction. No matter what your system, the innovative design of Chord Signature speaker cable will transform the sound and really bring your music or soundtracks to life. The materials used in the construction of the Chord Signature speaker cable are the same as those found in interconnects. Oxygen free copper, silver and silver plated copper are used as conductors for the vast majority of speaker cables. Carbon fibre has been used, as have hybrids of other materials. The conductors can be either stranded or solid core but whilst we have been able to successfully use solid core conductors in the construction of interconnects, we have yet to be able to do so in speaker cables. Solid core speaker cables tend to cut off the leading and trailing edges of musical notes and produce a slightly lean bass sound. This can lead to an apparently cleaner and less muddled sound but at the expense of accuracy. All Chord Company speaker cables use stranded conductors and our research has shown that it is better to use fewer heavier gauge conductors than lots of lighter gauge conductors. Lighter gauge conductors get used in a lot of budget speaker cables simply because they make for a more flexible cable. The Chord Signature speaker cable has been designed to be extremely compatible and to maintain signal quality over long runs. Once again, as with the Chord interconnect range, there are no particularly unusual electrical measurements. If you are passionate about your music, this is a cable you really must try.

Chord Company Signature Speaker Cables 2 meters Pair. The cables is in very good condition with original Chord Company bag. See all the photos attached for details. -Chord Signature Speaker Cable - Product Description Fitting Chord Signature speaker cable to your system will come as quite a shock. You will find it hard to believe just how much noise your previous speaker cable was allowing to get in the way of the sound. You will be able to hear very fine and delicate detail that will sound unforced and natural. There will be more space around individual voices and instruments. No matter how complex the music, you will be able to pick out individual instruments. Tonally, the cable is neutral and will portray the very subtle dynamic changes that are so vital to music reproduction. No matter what your system, the innovative design of Chord Signature speaker cable will transform the sound and really bring your music or soundtracks to life. The materials used in the construction of the Chord Signature speaker cable are the same as those found in interconnects. Oxygen free copper, silver and silver plated copper are used as conductors for the vast majority of speaker cables. Carbon fibre has been used, as have hybrids of other materials. The conductors can be either stranded or solid core but whilst we have been able to successfully use solid core conductors in the construction of interconnects, we have yet to be able to do so in speaker cables. Solid core speaker cables tend to cut off the leading and trailing edges of musical notes and produce a slightly lean bass sound. This can lead to an apparently cleaner and less muddled sound but at the expense of accuracy. All Chord Company speaker cables use stranded conductors and our research has shown that it is better to use fewer heavier gauge conductors than lots of lighter gauge conductors. Lighter gauge conductors get used in a lot of budget speaker cables simply because they make for a more flexible cable. The Chord Signature speaker cable has been designed to be extremely compatible and to maintain signal quality over long runs. Once again, as with the Chord interconnect range, there are no particularly unusual electrical measurements. If you are passionate about your music, this is a cable you really must try.

Chord Company Signature Speaker Jumper Links Bi-Wire Set of 4. In excellent condition. RRP £250.

Chord Company Signature Speaker Cables Jumper Links Bi-Wire (Set of 4 RRP £250) in excellent condition with original packaging.Product DescriptionSignature bi-wire speaker linksAn instant upgrade over the basic wire or pressed metal versions, commonly found bridging the inputs on bi-wire speakers. Featuring the latest, hi-tech ChordOhmic 4mm plugs.Startling improvements to sound quality. Easy to fit. Signature links will work with any speaker cable. The design is based closely on the Chord Signature Reference speaker cable.Chord Signature speaker cable jumpers are a highly effective alternative to the cheap jumpers supplied with most speakers and offer a cheaper alternative to biwiring. These jumpers are an excellent upgrade over standard jumper links.Two sets for a pair of speakersWhy use high quality jumpers?Most biwireable speakers (those with +/- terminals for both high frequency HF and low frequency LF drivers) include cheap metal links that connect the HF and LF connections together to allow you to us non biwire (standard twin pair) speaker cable.Most standard jumper links are not highly effective contacts due to composition and surface area of the metal often used. In effect, if you are using a standard (non biwire) 2-2 cable and connecting this directly to HF or LF drivers with lesser quality jumpers inbetween the HF and LF connections, youre losing out on getting the best sound from the other drivers and negating the benefit of having good quality speaker cables.Using a high quality set of jumpers will ensure you get the best possible connection between driver terminals and the sound quality possible from the speaker cable in use is able to be enjoyed best as possible through both sets of drivers. You should find low end bass extension is better and the high end crisper.

Chord Company Signature Speaker Cables Jumper Links Bi-Wire (Set of 4 RRP £250) in excellent condition with original packaging.Product DescriptionSignature bi-wire speaker linksAn instant upgrade over the basic wire or pressed metal versions, commonly found bridging the inputs on bi-wire speakers. Featuring the latest, hi-tech ChordOhmic 4mm plugs.Startling improvements to sound quality. Easy to fit. Signature links will work with any speaker cable. The design is based closely on the Chord Signature Reference speaker cable.Chord Signature speaker cable jumpers are a highly effective alternative to the cheap jumpers supplied with most speakers and offer a cheaper alternative to biwiring. These jumpers are an excellent upgrade over standard jumper links.Two sets for a pair of speakersWhy use high quality jumpers?Most biwireable speakers (those with +/- terminals for both high frequency HF and low frequency LF drivers) include cheap metal links that connect the HF and LF connections together to allow you to us non biwire (standard twin pair) speaker cable.Most standard jumper links are not highly effective contacts due to composition and surface area of the metal often used. In effect, if you are using a standard (non biwire) 2-2 cable and connecting this directly to HF or LF drivers with lesser quality jumpers inbetween the HF and LF connections, youre losing out on getting the best sound from the other drivers and negating the benefit of having good quality speaker cables.Using a high quality set of jumpers will ensure you get the best possible connection between driver terminals and the sound quality possible from the speaker cable in use is able to be enjoyed best as possible through both sets of drivers. You should find low end bass extension is better and the high end crisper.

Chord Company Signature Speaker Cables Jumper Links Bi-Wire (Set of 4 RRP £250) in excellent condition with original packaging.Product DescriptionSignature bi-wire speaker linksAn instant upgrade over the basic wire or pressed metal versions, commonly found bridging the inputs on bi-wire speakers. Featuring the latest, hi-tech ChordOhmic 4mm plugs.Startling improvements to sound quality. Easy to fit. Signature links will work with any speaker cable. The design is based closely on the Chord Signature Reference speaker cable.Chord Signature speaker cable jumpers are a highly effective alternative to the cheap jumpers supplied with most speakers and offer a cheaper alternative to biwiring. These jumpers are an excellent upgrade over standard jumper links.Two sets for a pair of speakersWhy use high quality jumpers?Most biwireable speakers (those with +/- terminals for both high frequency HF and low frequency LF drivers) include cheap metal links that connect the HF and LF connections together to allow you to us non biwire (standard twin pair) speaker cable.Most standard jumper links are not highly effective contacts due to composition and surface area of the metal often used. In effect, if you are using a standard (non biwire) 2-2 cable and connecting this directly to HF or LF drivers with lesser quality jumpers inbetween the HF and LF connections, youre losing out on getting the best sound from the other drivers and negating the benefit of having good quality speaker cables.Using a high quality set of jumpers will ensure you get the best possible connection between driver terminals and the sound quality possible from the speaker cable in use is able to be enjoyed best as possible through both sets of drivers. You should find low end bass extension is better and the high end crisper.

Chord Company Signature XL Speaker Cables 2 x 2 meters (Pair) Factory Terminated. Used but still in good condition, one banana little bent but still good.See all the photos for condition details.RRP £1400Chord SignatureXL Speaker Cable - Factory Terminated Signature was Chords first high-frequency shielded speaker cable. At the time of its introduction (2004/5), it marked a massive leap in speaker cable performance. It was also the biggest, stiffest, brightest cable Chord had ever made. The conductors were oxygen free copper, the insulation was gas foamed Polyethylene, Shielding was a three layer braid and foil combination, effective to high frequencies and the outer jacket a flexible polyethylene. It was just flexible enough to fit into a system. Signature speaker cable was another product that didn’t need a press release or a review, it took off so fast by word of mouth, that for a while there was almost a permanent waiting list.It remained unchanged for about ten years, until Chord could apply improved building techniques and materials such as more efficient shielding, silver-plated conductors and PTFE insulation that would produce a more neutral tonal characteristic and a cable better able to carry detail, dynamics and timbre. This became Signature Reference.Signature Reference, like most of Chords cables, used PTFE insulation (often referred to as Teflon™) and until the arrival of Taylon®, was Chords “go to” material. Although expensive, it offered the best performance.Material technology is constantly developing and improving and alternatives to PTFE are now available. While the high cost of Taylon® prevents Chord from using this in their Signature range, they were able to find a suitable family of insulation materials known as XLPE (Cross-linked Polyethylene). One version of this material looked particularly interesting and following listening tests, proved to be clearly better than the PTFE in Signature Reference.Specification :Quantity 2x2 meters pairConductors: Silver-plated, high purity OFCConfiguration: Twisted pairConductor Insulation: XLPEShielding: Individually shielded positive and minus conductors. High density foil and 95% coverage metal braid. Translucent PVC outer jacketAWG: 10mm2: 5.26Diameter: 2 x 8.5mmColour: black

Chord Company Signature Speaker Cables 2 meters Pair factory terminated bananas plugs.Used but still in very good condition with original Chord Company bag. One of the lasted manufactured in the year 2014, which benefited from modern bananas plugs.Chord Signature Speaker Cable - Product DescriptionFitting Chord Signature speaker cable to your system will come as quite a shock. You will find it hard to believe just how much noise your previous speaker cable was allowing to get in the way of the sound. You will be able to hear very fine and delicate detail that will sound unforced and natural. There will be more space around individual voices and instruments. No matter how complex the music, you will be able to pick out individual instruments. Tonally, the cable is neutral and will portray the very subtle dynamic changes that are so vital to music reproduction. No matter what your system, the innovative design of Chord Signature speaker cable will transform the sound and really bring your music or soundtracks to life. The materials used in the construction of the Chord Signature speaker cable are the same as those found in interconnects. Oxygen free copper, silver and silver plated copper are used as conductors for the vast majority of speaker cables. Carbon fibre has been used, as have hybrids of other materials. The conductors can be either stranded or solid core but whilst we have been able to successfully use solid core conductors in the construction of interconnects, we have yet to be able to do so in speaker cables. Solid core speaker cables tend to cut off the leading and trailing edges of musical notes and produce a slightly lean bass sound. This can lead to an apparently cleaner and less muddled sound but at the expense of accuracy. All Chord Company speaker cables use stranded conductors and our research has shown that it is better to use fewer heavier gauge conductors than lots of lighter gauge conductors. Lighter gauge conductors get used in a lot of budget speaker cables simply because they make for a more flexible cable.The Chord Signature speaker cable has been designed to be extremely compatible and to maintain signal quality over long runs. Once again, as with the Chord interconnect range, there are no particularly unusual electrical measurements.If you are passionate about your music, this is a cable you really must try.

Chord Company Signature XL Speaker Cables 2 x 2 meters (Pair) Factory Terminated. Used but still in good condition, one banana little bent but still good.See all the photos for condition details.RRP £1400Chord SignatureXL Speaker Cable - Factory Terminated Signature was Chords first high-frequency shielded speaker cable. At the time of its introduction (2004/5), it marked a massive leap in speaker cable performance. It was also the biggest, stiffest, brightest cable Chord had ever made. The conductors were oxygen free copper, the insulation was gas foamed Polyethylene, Shielding was a three layer braid and foil combination, effective to high frequencies and the outer jacket a flexible polyethylene. It was just flexible enough to fit into a system. Signature speaker cable was another product that didn’t need a press release or a review, it took off so fast by word of mouth, that for a while there was almost a permanent waiting list.It remained unchanged for about ten years, until Chord could apply improved building techniques and materials such as more efficient shielding, silver-plated conductors and PTFE insulation that would produce a more neutral tonal characteristic and a cable better able to carry detail, dynamics and timbre. This became Signature Reference.Signature Reference, like most of Chords cables, used PTFE insulation (often referred to as Teflon™) and until the arrival of Taylon®, was Chords “go to” material. Although expensive, it offered the best performance.Material technology is constantly developing and improving and alternatives to PTFE are now available. While the high cost of Taylon® prevents Chord from using this in their Signature range, they were able to find a suitable family of insulation materials known as XLPE (Cross-linked Polyethylene). One version of this material looked particularly interesting and following listening tests, proved to be clearly better than the PTFE in Signature Reference.Specification :Quantity 2x2 meters pairConductors: Silver-plated, high purity OFCConfiguration: Twisted pairConductor Insulation: XLPEShielding: Individually shielded positive and minus conductors. High density foil and 95% coverage metal braid. Translucent PVC outer jacketAWG: 10mm2: 5.26Diameter: 2 x 8.5mmColour: black

Free eBay listing template designed by dewiso.com Chord Company Signature Speaker links. Spade to 4mm Banana, 20cm - (BRAND NEW) Signature bi-wire speaker linksRRP: £250 An instant upgrade over the basic wire or pressed metal versions, commonly found bridging the inputs on bi-wire speakers. Featuring the latest, hi-tech ChordOhmic 4mm plugs/spades. Startling improvements to sound quality. Easy to fit. Signature links will work with any speaker cable. The design is based closely on the Chord Signature Reference speaker cable. Comes with lifetime warranty against manufacturing defects. Buy with confidence from an established Hi-Fi shop and authorised Chord Company Cables UK dealer. About the Signature bi-wire speaker links: An instant upgrade over the basic wire or pressed metal versions, commonly found bridging the inputs on bi-wire speakers. Featuring the latest, hi-tech ChordOhmic 4mm plugs/spades. Startling improvements to sound quality. Easy to fit. Signature links will work with any speaker cable. The design is based closely on the Chord Signature Reference speaker cable. Contact us We can be contacted at any time through eBay messages if you have any questions. We will aim to respond to you within 24 hours (Monday - Saturday) and do our best to help you out! Wed like to be sure you are completely satisfied with your purchase. You can also pop in and see us if youre local! Soundcraft Hi-Fi, 40 High Street, Ashford, Kent, UK, TN24 8TE01233 624441 Payment We accept all major payments processed by eBay. We do not accept cash on collection. Shipping Delivery Service: Items sent within the UK are shipped with either UPS (Next Day) or Royal Mail (1st Class). This is dependent on the dimensions and weight of the item. Delivery Speed: Next day UK mainland (Monday - Friday). Delivery to Northern Ireland may take longer. Dispatch Time: We aim to dispatch all our orders within 2 working days of receiving cleared payment. International Shipping: All items sold outside of the UK will be shipped via the eBay Global Shipping Programme. If an item does not have Global Shipping enabled, we may not be allowed to sell it outside of the UK. Disclaimer On the rare occasion you are dissatisfied or an item is faulty, we ask that you give us the opportunity to resolve the issue before leaving feedback or starting a return. We will do our very best to ensure you leave us as a satisfied customer. Free eBay listing template designed by © dewiso.com.

Chord Company Signature XL Speaker Cables 2 x 2 meters (Pair) Factory Terminated. Used but still in good condition.See the photos for condition details.RRP £1400Chord SignatureXL Speaker Cable - Factory Terminated Signature was Chords first high-frequency shielded speaker cable. At the time of its introduction (2004/5), it marked a massive leap in speaker cable performance. It was also the biggest, stiffest, brightest cable Chord had ever made. The conductors were oxygen free copper, the insulation was gas foamed Polyethylene, Shielding was a three layer braid and foil combination, effective to high frequencies and the outer jacket a flexible polyethylene. It was just flexible enough to fit into a system. Signature speaker cable was another product that didn’t need a press release or a review, it took off so fast by word of mouth, that for a while there was almost a permanent waiting list.It remained unchanged for about ten years, until Chord could apply improved building techniques and materials such as more efficient shielding, silver-plated conductors and PTFE insulation that would produce a more neutral tonal characteristic and a cable better able to carry detail, dynamics and timbre. This became Signature Reference.Signature Reference, like most of Chords cables, used PTFE insulation (often referred to as Teflon™) and until the arrival of Taylon®, was Chords “go to” material. Although expensive, it offered the best performance.Material technology is constantly developing and improving and alternatives to PTFE are now available. While the high cost of Taylon® prevents Chord from using this in their Signature range, they were able to find a suitable family of insulation materials known as XLPE (Cross-linked Polyethylene). One version of this material looked particularly interesting and following listening tests, proved to be clearly better than the PTFE in Signature Reference.Specification :Quantity 2x2 meters pairConductors: Silver-plated, high purity OFCConfiguration: Twisted pairConductor Insulation: XLPEShielding: Individually shielded positive and minus conductors. High density foil and 95% coverage metal braid. Translucent PVC outer jacketAWG: 10mm2: 5.26Diameter: 2 x 8.5mmColour: black

Chord Company Signature XL Speaker Cables 2 x 2 meters (Pair) Factory Terminated. Used but still in good condition.See the photos for condition details.RRP £1400Chord SignatureXL Speaker Cable - Factory Terminated Signature was Chords first high-frequency shielded speaker cable. At the time of its introduction (2004/5), it marked a massive leap in speaker cable performance. It was also the biggest, stiffest, brightest cable Chord had ever made. The conductors were oxygen free copper, the insulation was gas foamed Polyethylene, Shielding was a three layer braid and foil combination, effective to high frequencies and the outer jacket a flexible polyethylene. It was just flexible enough to fit into a system. Signature speaker cable was another product that didn’t need a press release or a review, it took off so fast by word of mouth, that for a while there was almost a permanent waiting list.It remained unchanged for about ten years, until Chord could apply improved building techniques and materials such as more efficient shielding, silver-plated conductors and PTFE insulation that would produce a more neutral tonal characteristic and a cable better able to carry detail, dynamics and timbre. This became Signature Reference.Signature Reference, like most of Chords cables, used PTFE insulation (often referred to as Teflon™) and until the arrival of Taylon®, was Chords “go to” material. Although expensive, it offered the best performance.Material technology is constantly developing and improving and alternatives to PTFE are now available. While the high cost of Taylon® prevents Chord from using this in their Signature range, they were able to find a suitable family of insulation materials known as XLPE (Cross-linked Polyethylene). One version of this material looked particularly interesting and following listening tests, proved to be clearly better than the PTFE in Signature Reference.Specification :Quantity 2x2 meters pairConductors: Silver-plated, high purity OFCConfiguration: Twisted pairConductor Insulation: XLPEShielding: Individually shielded positive and minus conductors. High density foil and 95% coverage metal braid. Translucent PVC outer jacketAWG: 10mm2: 5.26Diameter: 2 x 8.5mmColour: black

Chord Company Signature Speaker Cables 2 meters Pair factory terminated bananas plugs.2 x 2 meters length is the perfect audiophile speaker cables size.Used but still in very good condition with original Chord Company bag. Chord Signature Speaker Cable - Product DescriptionFitting Chord Signature speaker cable to your system will come as quite a shock. You will find it hard to believe just how much noise your previous speaker cable was allowing to get in the way of the sound. You will be able to hear very fine and delicate detail that will sound unforced and natural. There will be more space around individual voices and instruments. No matter how complex the music, you will be able to pick out individual instruments. Tonally, the cable is neutral and will portray the very subtle dynamic changes that are so vital to music reproduction. No matter what your system, the innovative design of Chord Signature speaker cable will transform the sound and really bring your music or soundtracks to life. The materials used in the construction of the Chord Signature speaker cable are the same as those found in interconnects. Oxygen free copper, silver and silver plated copper are used as conductors for the vast majority of speaker cables. Carbon fibre has been used, as have hybrids of other materials. The conductors can be either stranded or solid core but whilst we have been able to successfully use solid core conductors in the construction of interconnects, we have yet to be able to do so in speaker cables. Solid core speaker cables tend to cut off the leading and trailing edges of musical notes and produce a slightly lean bass sound. This can lead to an apparently cleaner and less muddled sound but at the expense of accuracy. All Chord Company speaker cables use stranded conductors and our research has shown that it is better to use fewer heavier gauge conductors than lots of lighter gauge conductors. Lighter gauge conductors get used in a lot of budget speaker cables simply because they make for a more flexible cable.The Chord Signature speaker cable has been designed to be extremely compatible and to maintain signal quality over long runs. Once again, as with the Chord interconnect range, there are no particularly unusual electrical measurements.If you are passionate about your music, this is a cable you really must try.

Chord Company Signature Speaker Cables 2 meters Pair factory terminated bananas plugs.2 x 2 meters length is the perfect audiophile speaker cables size.Used but still in very good condition with original Chord Company bag. Chord Signature Speaker Cable - Product DescriptionFitting Chord Signature speaker cable to your system will come as quite a shock. You will find it hard to believe just how much noise your previous speaker cable was allowing to get in the way of the sound. You will be able to hear very fine and delicate detail that will sound unforced and natural. There will be more space around individual voices and instruments. No matter how complex the music, you will be able to pick out individual instruments. Tonally, the cable is neutral and will portray the very subtle dynamic changes that are so vital to music reproduction. No matter what your system, the innovative design of Chord Signature speaker cable will transform the sound and really bring your music or soundtracks to life. The materials used in the construction of the Chord Signature speaker cable are the same as those found in interconnects. Oxygen free copper, silver and silver plated copper are used as conductors for the vast majority of speaker cables. Carbon fibre has been used, as have hybrids of other materials. The conductors can be either stranded or solid core but whilst we have been able to successfully use solid core conductors in the construction of interconnects, we have yet to be able to do so in speaker cables. Solid core speaker cables tend to cut off the leading and trailing edges of musical notes and produce a slightly lean bass sound. This can lead to an apparently cleaner and less muddled sound but at the expense of accuracy. All Chord Company speaker cables use stranded conductors and our research has shown that it is better to use fewer heavier gauge conductors than lots of lighter gauge conductors. Lighter gauge conductors get used in a lot of budget speaker cables simply because they make for a more flexible cable.The Chord Signature speaker cable has been designed to be extremely compatible and to maintain signal quality over long runs. Once again, as with the Chord interconnect range, there are no particularly unusual electrical measurements.If you are passionate about your music, this is a cable you really must try.

Chord Company Signature XL AUDIO SPEAKER CABLES 2x 2.5m Pair Factory Terminated. Chord Company Signature XL AUDIO SPEAKER CABLES 2x 2.5m Pair Factory Terminated Welcome to my listing Fantastic condition, but have since upgraded so need to move this on to a good home. Main colour: Black/ Grey No defects to speak of and cables perform perfectly and would be a great upgrade to and system. Item comes wrapped and pack suitable for delivery. For more detailed spec on this item please visit the CHORD website. For UK Sale ONLY No Returns on this item

Chord Company Signature Speaker Cables 2 meters Pair factory terminated bananas plugs.2 x 2 meters length is the perfect audiophile speaker cables size.Used but still in very good condition with original Chord Company bag. -Chord Signature Speaker Cable - Product DescriptionFitting Chord Signature speaker cable to your system will come as quite a shock. You will find it hard to believe just how much noise your previous speaker cable was allowing to get in the way of the sound. You will be able to hear very fine and delicate detail that will sound unforced and natural. There will be more space around individual voices and instruments. No matter how complex the music, you will be able to pick out individual instruments. Tonally, the cable is neutral and will portray the very subtle dynamic changes that are so vital to music reproduction. No matter what your system, the innovative design of Chord Signature speaker cable will transform the sound and really bring your music or soundtracks to life. The materials used in the construction of the Chord Signature speaker cable are the same as those found in interconnects. Oxygen free copper, silver and silver plated copper are used as conductors for the vast majority of speaker cables. Carbon fibre has been used, as have hybrids of other materials. The conductors can be either stranded or solid core but whilst we have been able to successfully use solid core conductors in the construction of interconnects, we have yet to be able to do so in speaker cables. Solid core speaker cables tend to cut off the leading and trailing edges of musical notes and produce a slightly lean bass sound. This can lead to an apparently cleaner and less muddled sound but at the expense of accuracy. All Chord Company speaker cables use stranded conductors and our research has shown that it is better to use fewer heavier gauge conductors than lots of lighter gauge conductors. Lighter gauge conductors get used in a lot of budget speaker cables simply because they make for a more flexible cable.The Chord Signature speaker cable has been designed to be extremely compatible and to maintain signal quality over long runs. Once again, as with the Chord interconnect range, there are no particularly unusual electrical measurements.If you are passionate about your music, this is a cable you really must try.

Chord Company Signature Speaker Cables Jumper Links Bi-Wire Set of 4 RRP £250 in excellent condition with original packaging.Product DescriptionSignature bi-wire speaker linksAn instant upgrade over the basic wire or pressed metal versions, commonly found bridging the inputs on bi-wire speakers. Featuring the latest, hi-tech ChordOhmic 4mm plugs.Startling improvements to sound quality. Easy to fit. Signature links will work with any speaker cable. The design is based closely on the Chord Signature Reference speaker cable.Chord Signature speaker cable jumpers are a highly effective alternative to the cheap jumpers supplied with most speakers and offer a cheaper alternative to biwiring. These jumpers are an excellent upgrade over standard jumper links.Two sets for a pair of speakersWhy use high quality jumpers?Most biwireable speakers (those with +/- terminals for both high frequency HF and low frequency LF drivers) include cheap metal links that connect the HF and LF connections together to allow you to us non biwire (standard twin pair) speaker cable.Most standard jumper links are not highly effective contacts due to composition and surface area of the metal often used. In effect, if you are using a standard (non biwire) 2-2 cable and connecting this directly to HF or LF drivers with lesser quality jumpers inbetween the HF and LF connections, youre losing out on getting the best sound from the other drivers and negating the benefit of having good quality speaker cables.Using a high quality set of jumpers will ensure you get the best possible connection between driver terminals and the sound quality possible from the speaker cable in use is able to be enjoyed best as possible through both sets of drivers. You should find low end bass extension is better and the high end crisper.

Free eBay listing template designed by dewiso.com Chord Company Signature Speaker links. Spade to 4mm Banana, 20cm - (BRAND NEW) Signature bi-wire speaker linksRRP: £250 An instant upgrade over the basic wire or pressed metal versions, commonly found bridging the inputs on bi-wire speakers. Featuring the latest, hi-tech ChordOhmic 4mm plugs/spades. Startling improvements to sound quality. Easy to fit. Signature links will work with any speaker cable. The design is based closely on the Chord Signature Reference speaker cable. Comes with lifetime warranty against manufacturing defects. Buy with confidence from an established Hi-Fi shop and authorised Chord Company Cables UK dealer. About the Signature bi-wire speaker links: An instant upgrade over the basic wire or pressed metal versions, commonly found bridging the inputs on bi-wire speakers. Featuring the latest, hi-tech ChordOhmic 4mm plugs/spades. Startling improvements to sound quality. Easy to fit. Signature links will work with any speaker cable. The design is based closely on the Chord Signature Reference speaker cable. Contact us We can be contacted at any time through eBay messages if you have any questions. We will aim to respond to you within 24 hours (Monday - Saturday) and do our best to help you out! Wed like to be sure you are completely satisfied with your purchase. You can also pop in and see us if youre local! Soundcraft Hi-Fi, 40 High Street, Ashford, Kent, UK, TN24 8TE01233 624441 Payment We accept all major payments processed by eBay. We do not accept cash on collection. Shipping Delivery Service: Items sent within the UK are shipped with either UPS (Next Day) or Royal Mail (1st Class). This is dependent on the dimensions and weight of the item. Delivery Speed: Next day UK mainland (Monday - Friday). Delivery to Northern Ireland may take longer. Dispatch Time: We aim to dispatch all our orders within 2 working days of receiving cleared payment. International Shipping: All items sold outside of the UK will be shipped via the eBay Global Shipping Programme. If an item does not have Global Shipping enabled, we may not be allowed to sell it outside of the UK. Disclaimer On the rare occasion you are dissatisfied or an item is faulty, we ask that you give us the opportunity to resolve the issue before leaving feedback or starting a return. We will do our very best to ensure you leave us as a satisfied customer. Free eBay listing template designed by © dewiso.com.

Chord Company Signature Speaker Jumper Links Bi-Wire Set of 4. In excellent condition. RRP £250.

Chord Company Signature Speaker Cables 2 meters Pair. The cables is in very good condition with original Chord Company bag. See all the photos attached for details. -Chord Signature Speaker Cable - Product Description Fitting Chord Signature speaker cable to your system will come as quite a shock. You will find it hard to believe just how much noise your previous speaker cable was allowing to get in the way of the sound. You will be able to hear very fine and delicate detail that will sound unforced and natural. There will be more space around individual voices and instruments. No matter how complex the music, you will be able to pick out individual instruments. Tonally, the cable is neutral and will portray the very subtle dynamic changes that are so vital to music reproduction. No matter what your system, the innovative design of Chord Signature speaker cable will transform the sound and really bring your music or soundtracks to life. The materials used in the construction of the Chord Signature speaker cable are the same as those found in interconnects. Oxygen free copper, silver and silver plated copper are used as conductors for the vast majority of speaker cables. Carbon fibre has been used, as have hybrids of other materials. The conductors can be either stranded or solid core but whilst we have been able to successfully use solid core conductors in the construction of interconnects, we have yet to be able to do so in speaker cables. Solid core speaker cables tend to cut off the leading and trailing edges of musical notes and produce a slightly lean bass sound. This can lead to an apparently cleaner and less muddled sound but at the expense of accuracy. All Chord Company speaker cables use stranded conductors and our research has shown that it is better to use fewer heavier gauge conductors than lots of lighter gauge conductors. Lighter gauge conductors get used in a lot of budget speaker cables simply because they make for a more flexible cable. The Chord Signature speaker cable has been designed to be extremely compatible and to maintain signal quality over long runs. Once again, as with the Chord interconnect range, there are no particularly unusual electrical measurements. If you are passionate about your music, this is a cable you really must try.

Chord Company Signature Speaker Jumper Links Bi-Wire Set of 4. In excellent condition. RRP £250.

Chord Company Signature Speaker Cables 2 meters Pair. The cables is in very good condition with original Chord Company bag. See all the photos attached for details. -Chord Signature Speaker Cable - Product Description Fitting Chord Signature speaker cable to your system will come as quite a shock. You will find it hard to believe just how much noise your previous speaker cable was allowing to get in the way of the sound. You will be able to hear very fine and delicate detail that will sound unforced and natural. There will be more space around individual voices and instruments. No matter how complex the music, you will be able to pick out individual instruments. Tonally, the cable is neutral and will portray the very subtle dynamic changes that are so vital to music reproduction. No matter what your system, the innovative design of Chord Signature speaker cable will transform the sound and really bring your music or soundtracks to life. The materials used in the construction of the Chord Signature speaker cable are the same as those found in interconnects. Oxygen free copper, silver and silver plated copper are used as conductors for the vast majority of speaker cables. Carbon fibre has been used, as have hybrids of other materials. The conductors can be either stranded or solid core but whilst we have been able to successfully use solid core conductors in the construction of interconnects, we have yet to be able to do so in speaker cables. Solid core speaker cables tend to cut off the leading and trailing edges of musical notes and produce a slightly lean bass sound. This can lead to an apparently cleaner and less muddled sound but at the expense of accuracy. All Chord Company speaker cables use stranded conductors and our research has shown that it is better to use fewer heavier gauge conductors than lots of lighter gauge conductors. Lighter gauge conductors get used in a lot of budget speaker cables simply because they make for a more flexible cable. The Chord Signature speaker cable has been designed to be extremely compatible and to maintain signal quality over long runs. Once again, as with the Chord interconnect range, there are no particularly unusual electrical measurements. If you are passionate about your music, this is a cable you really must try.