Crown 2-Channel 350 Watts High-Density Power Amplifier XLS1000 TESTED WORKING!! Power adapter not included. Cosmetic Description: C4 (see chart below)Functionality Description: F4 (see chart below) CodeCategoryCosmetic DescriptionC0Not categorized C1DamagedFor materials recoveryC2Used Poor· Heavy use and age· Cosmetic blemishes are significant, such as multiple heavy dents, may require repair.· Damage to latches, hinges, keyboards, etc. is prevalent.· Critical parts are missing.C3Used Fair· Moderate use and age· Cosmetic blemishes are consistent with wear, including multiple dents, discoloration, and light to heavy scratches.· Damage to latches, hinges, keyboards, etc.· Some parts, panels, bezels, or covers may be missing.C4Used Good· Cosmetic blemishes include scratches and/or other surface imperfections from consistent use, but equipment is in good condition overall.· Minor wear of labeling may be visible.· Small dents and small areas of discoloration may be present from the removal of tags.· No damage to latches, hinges, nor any missing parts, panels, bezels, or covers.C5Used Very Good· Cosmetic blemishes include minor scratches and/or other surface imperfections from consistent use, but equipment is in good condition.· Minor wear of labeling may be visible.· Minor dents and areas of discoloration from the removal of tags.· No missing parts.C6Used Excellent· Overall excellent cosmetic condition.· May have light scratches or other minor blemishes from normal wear.· Minor cosmetic blemishes have no impact on the system?s overall functionality or performance.· Fully cleaned with all non-original labels removed.· No missing parts.C7Certified Pre-Owned· Seller or manufacturer refurbished.· Used equipment that has been fully restored to like-new conditions with warranty.· Fully cleaned and cosmetically repaired with no blemishes.· No missing parts.C8Unused· New, out of box, unused equipment removed from original packaging with no signs of wear or alteration.C9New Open Box· New, unused equipment in original packaging where factory seals have been broken.· No signs of wear or alternation.C10New Unopened Box· New, unopened, unused equipment in original packaging.· No signs of alteration. CodeCategoryProduct Functionality DescriptionF1Collectible or Specialty Equipment· Collectibles are rare, vintage, and no longer manufactured or supported by the OEM.· Specialty equipment is rare and specialized equipment not generally available in retail.· May have broken or missing parts.F2Verified Specialty Electronics· Verified removed from operation with no known defects in functionality.· No physical damage or defects.· No corrosion.· No missing parts.· Part numbers and serial numbers verified accurate.F3Key functions Working· A subset of the primary functions of the device that an ordinary user of the device expects to function are verified working through manual or software tests.· Software may not be loaded or configured.· Hardware required for key functions to be tested may have been removed after testing (e.g. hard drive).· May be missing components or parts not essential to key functions.· Secondary functions may not be tested or working.· May not include Focus Materials (e.g. battery) that are not working or not tested.· All missing components or parts will be listed for each item.F4Hardware Functional· All hardware is tested and verified working through manual or software tests.· No missing or damaged components or parts.· Software not loaded or configured.· No hardware defects.F5Refurbished· All functions tested and verified working through software tests.· Loaded and configured with legally licensed software for full operations.· Software test results are available.· No hardware or software defects.F6Like New· All functions tested and verified working through software tests.· Repaired with OEM original parts.· Loaded and configured with original manufacturer?s legally licensed software for full operation.· Meets OEM specifications for full original functionality.· Software test results are available.· Zero defects.F7New in Box· Loaded and configured with original manufacturer?s legally licensed software for full operation.· Meets OEM specifications for full original functionality.· Zero defects.

Crown XLS1000 2-Channel Power Amplifier - 350W @ 4OhmCrowns XLS 1000 amplifier dishes out 215 watts RMS per channel at 8 ohms, 350 watts per channel at 4 ohms, and up to 1100 watts in bridged mode — not bad for less than 9 pounds of gear. Because its a highly efficient Class D amp, it uses internal heat sinks with forced-air cooling to keep the internal temperature under control, with an automated rear fan that kicks in when youre really pushing the amp hard. The amps optimized switched-mode power supply keeps things humming smoothly from start to finish.The amps front panel offers independent level control knobs and LEDs, an on/off switch, LCD screen, and three menu control buttons. The LCD screen lets you configure the amp mode, clip compressor, and crossover configuration with ease.The rear of the XLS 1000 is a veritable treasure trove of connections. Youll find balanced XLR inputs, 1/4 inputs, and RCA inputs, so you can get creative with your audio sources. The 1/4 connectors also serve as loop-thrus for adding more amps to the mix. Youll find binding posts and Neutrik Speakon® outputs for the speakers, plus a built-in circuit breaker to protect against overload. - 400W max rated – Product highlights:General Information:2-channel power amplifier with built-in crossoverpower output:215 watts RMS per channel at 8 ohms350 watts RMS per channel at 4 ohms550 watts RMS per channel at 2 ohms700 watts RMS (mono) at 8 ohms in bridged mode1100 watts RMS (mono) at 4 ohms in bridged modefrequency response: 20-20,000 Hz (-1 dB)signal-to-noise ratio: 97 dBtotal harmonic distortion: 0.5% (20-20,000 Hz)Features:DriveCore circuitry maintains Class D high efficiency with low noiseindependent right- and left-channel level controlsLCD screen with menu/prev/next buttonsrear panel circuit breaker/reset switchdefeatable Peakx Limiters for each channelPureBand Crossover System:Linkwitz-Riley 24dB/octave crossover filtercrossover frequency range: 50-3,000 Hz, with points every 1.5 octave centersfour crossover modes: crossover, low pass, high pass, and bridgeinternal heat sinks with forced-air coolingflow-through ventilation from front to back, plus automatic rear fan for critical temperaturesshort circuit, thermal, and current limiting protectionfront-panel LEDs indicate signal, -10dB and -20dB below clipping, clipping, and temperatureintegrated rack mount earsConnections:inputs: balanced XLR, 1/4, and RCAoutputs: two binding posts and two Neutrik Speakon1/4 outputs can be used to send signal to another ampOther Information:weight: 8.6 lbs.19W x 3-1/2H x 8-1/8D (2 rack spaces)

Crown XLS1000 2-Channel Power Amplifier - 350W @ 4OhmCrowns XLS 1000 amplifier dishes out 215 watts RMS per channel at 8 ohms, 350 watts per channel at 4 ohms, and up to 1100 watts in bridged mode — not bad for less than 9 pounds of gear. Because its a highly efficient Class D amp, it uses internal heat sinks with forced-air cooling to keep the internal temperature under control, with an automated rear fan that kicks in when youre really pushing the amp hard. The amps optimized switched-mode power supply keeps things humming smoothly from start to finish.The amps front panel offers independent level control knobs and LEDs, an on/off switch, LCD screen, and three menu control buttons. The LCD screen lets you configure the amp mode, clip compressor, and crossover configuration with ease.The rear of the XLS 1000 is a veritable treasure trove of connections. Youll find balanced XLR inputs, 1/4 inputs, and RCA inputs, so you can get creative with your audio sources. The 1/4 connectors also serve as loop-thrus for adding more amps to the mix. Youll find binding posts and Neutrik Speakon® outputs for the speakers, plus a built-in circuit breaker to protect against overload. - 400W max rated – Product highlights:General Information:2-channel power amplifier with built-in crossoverpower output:215 watts RMS per channel at 8 ohms350 watts RMS per channel at 4 ohms550 watts RMS per channel at 2 ohms700 watts RMS (mono) at 8 ohms in bridged mode1100 watts RMS (mono) at 4 ohms in bridged modefrequency response: 20-20,000 Hz (-1 dB)signal-to-noise ratio: 97 dBtotal harmonic distortion: 0.5% (20-20,000 Hz)Features:DriveCore circuitry maintains Class D high efficiency with low noiseindependent right- and left-channel level controlsLCD screen with menu/prev/next buttonsrear panel circuit breaker/reset switchdefeatable Peakx Limiters for each channelPureBand Crossover System:Linkwitz-Riley 24dB/octave crossover filtercrossover frequency range: 50-3,000 Hz, with points every 1.5 octave centersfour crossover modes: crossover, low pass, high pass, and bridgeinternal heat sinks with forced-air coolingflow-through ventilation from front to back, plus automatic rear fan for critical temperaturesshort circuit, thermal, and current limiting protectionfront-panel LEDs indicate signal, -10dB and -20dB below clipping, clipping, and temperatureintegrated rack mount earsConnections:inputs: balanced XLR, 1/4, and RCAoutputs: two binding posts and two Neutrik Speakon1/4 outputs can be used to send signal to another ampOther Information:weight: 8.6 lbs.19W x 3-1/2H x 8-1/8D (2 rack spaces)