**PLEASE READ** While attempting to see what type of fuse the amp had, with the thought of upgrading to ceramic fuses, the leads to the RCA from the board to the post were pulled apart. I did not realize how tight the back of the Amp was to the board I needed to remove to find the fuse. Having said that, both of the RCA Channels still work, but need to be re-soldered back to the board. I dont have the skill level to do that. Also, I only ran XLR, which was no impact to me. I repeat, both XLR inputs work! Now on to the features!! The Emotiva XPR-2 Power Amplifier is a high-performance stereo reference amplifier that delivers exceptional sound quality. It has a power output of **600 watts per channel into 8?** and a speaker load impedance of **4? (minimum)/1000 watts per channel into 4?**. The frequency response of the device is **5Hz to 150kHz**. The XPR-2 has a **fully balanced circuit design** with two complete preamplifier circuits from input to output, which provides a 6 dB increase in output compared to a single-ended design and common mode rejection. The device has a **2.5 kVA toroidal power transformer** which alone weighs 30 pounds, connected to a **240,000 uF low ESR capacitor bank** feeding a pair of optimized class H power amplifier modules. The XPR-2 has **two pairs of independently selectable balanced (XLR) and unbalanced (RCA) inputs for both channels | The RCA output will need to be reattached to the circuit board if you want to run using RCS. The XLR balanced still work**. The front of the XPR-2 has **dimmable blue lights** with a fully controllable LED bar graph metering system with selectable ballistics. VU and peak reading with auto release. The device has a **precision machined, 1 billet aluminum, multi-element faceplate with laser embossing and hand polished detailing**. The XPR-2 is **17 wide, 9.5 high, 19.5 deep** and weighs in at **75 pounds**. The Emotiva XPR-2 Power Amplifier requires a **20 Amp circuit and standard IEC 20 Amp outlet**. If you dont have a proper circuit and outlet, it is recommended you have one installed by a qualified electrician. It is recommended that the XPR-2 be plugged into its own dedicated 20 Amp circuit. If you need to plug the XPR-2 into a 15 Amp circuit, you can use a **Furman ADP-1520 line cord adapter** with an internal circuit breaker. This adapter will allow you to safely convert the 20 Amp plug to a standard wall outlet. From the Emotive XPR-2 Manual: Specifications Topology: Dual differential inputs on each channel, with fully discrete, high current, short signal path Class A/B Differential Reference power amplifier sections for each channel and Optimized. Class-H™ power supply topology. Number of Channels: 2 Power Output (rated power; THD < 0.1%): 600 watts / channel (x2); both channels driven; into 8 Ohms. 1000 watts / channel (x2); both channels driven; into 4 Ohms. Rated Power Bandwidth (at rated power; 8 Ohm load): 20 Hz to 20 kHz + /- 0.1 dB. Minimum Recommended Load Impedance (each channel): 4 Ohms (which equals one 4 Ohm load or two paralleled 8 Ohm loads per channel). Frequency Response: 5 Hz to 80 kHz +0 / -3 dB. THD + noise: < 0.0025% Signal to Noise Ratio (8 Ohm load): > 118 dB at rated power (A-weighted). > 93 dB at 1 watt (A-weighted). Damping Factor (8 Ohm load): > 500 Speaker Output Connections: Super heavy-duty custom Emotiva speaker binding posts - with clear acrylic insulators and heavy duty gold plated contacts; designed to accept heavy-gauge bare cables, lugs, or banana plugs.

Item in perfect condition. Everything is working perfectly collection only because of the weight cash on collection only. Please feel free to ask me any questions. Thank you