Non-Smoking Environment (Super Clean) The Emotiva XSP-1 Gen 2 Pre-Amplifier is a fully balanced stereo preamplifier that offers exceptional performance and flexibility. It features a fully balanced circuit design, which means that there are two complete preamplifier circuits from input to output. The difference between the two circuits is that one is inverted with respect to the other. Each circuit is referenced to ground. At the output, the signal from one circuit is re-inverted and added to the other, giving you not only a 6 dB increase in output compared to a single-ended design, but common mode rejection, which means that any electrical interference that is picked up along the circuit is cancelled out when the two signals are added together. The device has a maximum gain of +12 dB and a total harmonic distortion plus noise (THD+N) of 0.004%. The frequency response of the device is 20 Hz to 20 kHz ± 0.02 dB. The XSP-1 Gen 2 has two pairs of XLR inputs, four pairs of RCA inputs, and the ability to set crossover to subwoofer output 50 Hz – 250 Hz. The device also has a phono input that accepts MC as well as MM cartridge input signals. The output of the device is 1V (Pre out).

Very nice sounding stereo preamp that is very versatile.> Unbalanced and balanced inputs> Phono is MM or MC with adjustments> Processor loop> HT bypass> Unbalanced and balanced outputs> Subwoofer outputs with built-in crossover adjustments > Trigger in/out> IR in/out Includes remote, manual and power cord Ships in original box https://www.audiophilenirvana.com/audiophile-equipment-reviews/emotiva-xsp-1-gen-2-review/

Overture Ultimate Home Electronics, located in Wilmington, Delaware, is America’s premier high-end audio, home theater, and home electronics store. The equipment we are offering on Ebay is either equipment we have had on demo at Overture, or equipment that has been taken in by Overture as a trade-in from our customers. All of the equipment has been thoroughly checked by our technicians to make sure it works properly. BEFORE YOU BID SEE IF YOUR STATE IS ON THE TAX LIST. EBAY IS NOW CHARGING TAX.Up for auction is an Emotiva XSP-1 Gen 2 Stereo Preamp, used. Comes with manual, remote, and power cable

The Emotive XSP-1 Gen 2 is a solid state stereo preamplifier with a fully balanced circuit design. There are two sets of balanced inputs, four sets of unbalanced inputs, one set of balanced main outputs, one set of unbalanced main outputs, one phono input (mm and mc with user-configurable cartridge loading), one external processor loop, and support for both stereo subwoofers and a summed mono subwoofer. Full analog bass management and independent, individually configurable, Linkwitz-Riley 12 dB/octave high-pass and low-pass filters for the main outputs are included. A high current headphone amplifier with independent level control and a remote control round out the package. All the bases are covered!The mechanic and electronic build quality of the XSP-1 is excellent. The vacuum fluorescent display is relatively large, dimmable and easy to read. The front panel controls have a positive feel and the rear connectors are gold plated and of fine quality. The remote works as expected and has a substantial feel. The box, packing, owners manual, five year warranty and 30 day trial period are typical for Emotiva - very solid.The sound of the XSP-1 is very, very good. The noise floor with balanced and unbalanced sources is as low as any equipment that Ive experienced. Music seems to rise out of total blackness. The phono section is very quiet, clean and has a smooth effortless quality with both the moving magnet and high output moving coil cartridges auditioned. The tonal signature is neutral unless the (!) very effective tone controls are brought into play. These adjustments allow subtle adjustments similar to the tilt controls on Quad amplifiers and can add that smidge of heft or sparkle lacking in some source material. Soundstage reproduction is true to the source material and benefits from the very low noise floor.The inclusion of a subwoofer crossover is an unusual and welcome feature in a stereo preamplifier. It adds much needed flexibility for those audiophiles incorporating subwoofer(s). With stereo and summed mono modes, adjustable crossover frequency and a defeatable high pass filter, the only options missing are adjustable filter slopes and subwoofer gain control. The best feature is that the crossover doesnt appear to degrade the sound in any way. Add in the processor loop and now there is a better way to integrate a home theater and high performance stereo and still have effective bass management.

Overture Ultimate Home Electronics, located in Wilmington, Delaware, is America’s premier high-end audio, home theater, and home electronics store. The equipment we are offering on Ebay is either equipment we have had on demo at Overture, or equipment that has been taken in by Overture as a trade-in from our customers. All of the equipment has been thoroughly checked by our technicians to make sure it works properly. BEFORE YOU BID SEE IF YOUR STATE IS ON THE TAX LIST. EBAY IS NOW CHARGING TAX.Up for auction is an Emotiva XSP-1 Gen 2 Stereo Preamp, used. Comes with manual, remote, and power cable

RARE EMOTIVA XSP-1 Reference Stereo Preamplifier. Unit is in excellent cosmetic condition and from a pet-free and non-smoking home. Its been a part of my audiophile stereo setup for the last few years and performed flawlessly, paired with an Emotiva XPA2, driving a pair of Wilson WattPuppy 6s. Unfortunately, its stopped producing sound, otherwise other functions including remote and the display seem to be working fine. Its quite possibly an easy fix, but I just dont have time to figure it out so Im letting it go. Original MSRP of $1100 and it really is an awesome and versatile unit when fully working. The remote control is easily the best Ive ever come across. It feels like it was hewn from billet aluminium. The unit will be shipped to the contiguous 48 US states only for a flat $55 and signature required. Ps. I cant find the power cable so youll need to use your own. Sorry. :)

EMOTIVA XSP-1 Gen1 Fully Differential, Balanced, Reference Stereo PreAmplifier. Fully functional, but display is glitchy, and response to remote is non-existent. Sounds fantastic, great physical condition, but needs service.

EMOTIVA XSP-1 Gen1 Fully Differential, Balanced, Reference Stereo PreAmplifier. Fully functional, but display is glitchy, and response to remote is non-existent. Sounds fantastic, great physical condition, but needs service.

EMOTIVA XSP-1 Gen1 Fully Differential, Balanced, Reference Stereo PreAmplifier. Fully functional, but display is glitchy, and response to remote is non-existent. Sounds fantastic, great physical condition, but needs service.

EMOTIVA XSP-1 GEN 2 Fully Differential, Balanced, Reference Stereo PreAmplifier. Purchased used, excellent condition. Recently had firmware updated by Emotiva. Custom double box and packing provided by Emotiva. Original remote, and generic power cord included. Pet and smoke free home. Works flawlessly. Audiophile sound. Selectable phono stage. Possibly the best preamp I have ever owned. Very highly rated. Read the link and watch the video. This unit is a keeper to complement high end audio equipment. https://www.audiophilenirvana.com/audiophile-equipment-reviews/emotiva-xsp-1-gen-2-review/

Overture Ultimate Home Electronics, located in Wilmington, Delaware, is America’s premier high-end audio, home theater, and home electronics store. The equipment we are offering on Ebay is either equipment we have had on demo at Overture, or equipment that has been taken in by Overture as a trade-in from our customers. All of the equipment has been thoroughly checked by our technicians to make sure it works properly. BEFORE YOU BID SEE IF YOUR STATE IS ON THE TAX LIST. EBAY IS NOW CHARGING TAX.Up for auction is an Emotiva XSP-1 Stereo Pre-amp, used. The unit was tested and is fully functioning. Comes with remote, Manual, and power cable.

MINT CONDITION- EMOTIVA XSP-1 GEN 2 Fully Differential, Balanced, Reference Stereo PreAmplifier. Remote control, power cable, Original manual and original Emotiva shipping box for safe shipping. Non issues, comes from clean and non smoking environment. You will not be disappointed of this Pristine full functional pre amplifier. Low hours of use (maximum 20 hours.) Refining Balanced Performance The XSP-1 Gen 2 combines a pure, all-analog, audiophile topology with an advanced digital control system. This maintains the purity of the audio signal, while offering advanced features, resolution, and accuracy far surpassing traditional designs. The XSP-1 Gen 2 delivers an uncompromised listening experience in Reference Playback mode by totally avoiding single ended to balanced conversions from the signal path. Combined with instrumentation grade relays for input selection and high voltage, and a digitally-controlled analog resistor ladder network with 0.5dB per step resolution for volume, the XSP-1 Gen 2 maintains signal integrity and near perfect channel matching - even at very low listening levels. The Control You Need In terms of fine-tuning the sound of your system, most audiophile preamps are “take it or leave it”, offering little or no control over the interaction between your speakers and room. Not the XSP-1 Gen 2. It includes precision contour controls that allow you to tailor the high frequency and low frequency response of your system for perfect results in your listening environment. For absolute neutrality, the contour controls operate by switching networks of precision discrete tuning components in and out, and can, of course, be completely bypassed. Advanced Features Ease System Integration The XSP-1 Gen 2 packs a long list of features that make it the ideal centerpiece for your high performance audio system. It includes analog bass management for perfect integration with 2.1 or 2.2 systems, as well as a high current, load-invariant headphone amplifier, an external signal processor loop, trigger inputs and outputs, and a full-featured milled aluminum remote control. A large VFD display shows system status messages and provides visual confirmation of all actions and settings. Ready for Legacy Sources Unlike many other preamps these days, the XSP-1 includes a truly stunning and extremely quiet phono preamplifier with inputs for both moving magnet and moving coil cartridges (with user-selectable loading) The list of features can go on and on...but the real proof is in the listening experience, and in the XSP-1's incredible flexibility and ease of operation. Experience the next generation of balanced perfection. * Exceptional sound quality via an all-analog, fully balanced, differential signal path with vanishingly low noise and distortion. * Tight-tolerance surface mount components and short, precisely matched signal paths deliver a superb, tightly focused acoustic signature. * Excellent input and output flexibility: 2 sets of balanced inputs, 4 sets of unbalanced inputs, one set of balanced main outputs, and one set of unbalanced main outputs. * Support for both stereo subwoofers and a summed mono subwoofer. * Level control via a high resolution (.5dB/step) digitally controlled analog resistor network. * Audiophile quality, load invariant, high current headphone amplifier with independent level control and memory. * High performance phono preamp that supports both moving magnet and moving coil cartridges, with user-configurable cartridge loading for moving coil cartridges. * Full analog bass management with independent, individually configurable, Linkwitz-Riley 12 dB/octave high-pass and low-pass filters for the mains and subs. * Digital flexibility and convenience including precise repeatability on all settings, a smart mute function, turn on level limit, and a full function remote control. * True external processor loop. * Top quality parts and construction for years of reliable service, including hand-selected semiconductors and top quality passive components. * Gold plated, solid brass machined RCA connectors and gold plated XLR connectors. * Highly regulated and shielded toroidal power supply. * Informative, dimmable front panel VFD display shows level, status, and input selections. * Flexible trigger and control options. * Universal AC line voltage. * Fully transferrable five-year warranty.   * Line level Input: 2 pairs balanced; 4 pairs unbalanced * Home Theater (line level, left, right, sub) Input: 1 set balanced; 1 set unbalanced * Processor Loop (line level) Input: 1 pair unbalanced * Input Impedance (line level) Input: 50k ohms * Phono Input (MM or MC): 1 pair unbalanced * Main Outputs: 1 pair balanced; 1 pair unbalanced (Main outputs may be configured as flat or high-pass; high-pass is adjustable from 50 Hz to 250 Hz) * Subwoofer (left, right, summed) Output: 1 set balanced; 1 set unbalanced (Subwoofer outputs may be configured as flat or low-pass; low-pass is adjustable from 50 Hz to 250 Hz) * Processor Loop (line level) Output: 1 pair unbalanced * Minimum recommended load impedance: 600 ohms * Trigger Input and Output: 1 each IR input and output: 1 each * Gain structure: Nominal output level: 0 dBV (1 V) Nominal gain (with Volume set to “0”): 1 Maximum gain: +12 dB * High-Frequency and Low-Frequency Trims: HF trim (settings): -3 dB, -2 dB, -1 dB, Flat, +1 dB, +2 dB, +3 dB @ 12 kHz HF trim (inflection point): 4 kHz LF trim (settings): -3 dB, -2 dB, -1 dB, Flat, +1 dB, +2 dB, +3 dB @ 50 Hz LF trim (inflection point): 200 Hz * Bass Management: Crossover slopes (high-pass and low-pass): 12 dB / octave Crossover frequency (high-pass and low-pass): User configurable, 50 Hz to 250 Hz * Balanced Input to Balanced Output S/N (signal-to-noise ratio, A-weighted, ref +6 dBV): > 117 dB Frequency response: 20 Hz to 20 kHz +/- 0.02 dB THD + N (harmonic distortion plus noise, @ 1 kHz): < 0.0004% IMD (intermodulation distortion, SMPTE method, 60 Hz/7 kHz): < 0.001% Crosstalk (measured at +6 dBF, 10 kHz): < 100 dB * Unbalanced Input to Unbalanced Output S/N (signal-to-noise ratio, A-weighted, ref +6 dBV): > 113 dB Frequency response: 20 Hz to 20 kHz +/- 0.015 dB THD + N (harmonic distortion plus noise, @ 1 kHz): < 0.0006% IMD (intermodulation distortion, SMPTE method, 60 Hz/7 kHz): < 0.001% Crosstalk (measured at +6 dBF, 10 kHz): < 102 dB * Balanced Input to Unbalanced Output S/N (signal-to-noise ratio, A-weighted, ref +6 dBV): > 114 dB Frequency response: 20 Hz to 20 kHz +/- 0.015 dB THD + N (harmonic distortion plus noise, @ 1 kHz): < 0.0005% IMD (intermodulation distortion, SMPTE method, 60 Hz/7 kHz): < 0.0015% Crosstalk (measured at +6 dBF, 10 kHz): < 105 dB * Unbalanced Input to Balanced Output S/N (signal-to-noise ratio, A-weighted, ref +6 dBV): > 115 dB Frequency response: 20 Hz to 20 kHz +/- 0.017 dB THD + N (harmonic distortion plus noise, @ 1 kHz): < 0.0003% IMD (intermodulation distortion, SMPTE method, 60 Hz/7 kHz): < 0.007% Crosstalk (measured at +6 dBF, 10 kHz): < 100 dB * Phono (Moving Coil; phono in to balanced out) Gain (1 kHz, Volume at 0): approximately 60 dB Input impedance (user selectable): 47 ohms, 100 ohms, 470 ohms, 1k ohm S/N (signal-to-noise ratio, A-weighted, ref 1.0 mV in): > 79 dB Frequency response (referenced to standard RIAA curve): 20 Hz to 20 kHz +/- 0.35 dB THD (total harmonic distortion, ref 1.0 mV): < 0.008% IMD (intermodulation distortion, SMPTE method: < 0.15 % Crosstalk: < 65 dB * Phono (Moving Magnet; phono in to balanced out) Gain (1 kHz, Volume at 0): approximately 40 dB Input impedance: 47k Ohms S/N (signal-to-noise ratio, A-weighted, ref 10.0 mV in, A-weighted): > 96 dB Frequency response (referenced to standard RIAA curve): 20 Hz to 20 kHz +/- 0.3 dB THD (total harmonic distortion, ref 10 mV): < 0.001% IMD (intermodulation distortion, SMPTE method: < 0.05% Crosstalk: < 80 dB * Power Requirements: 115 VAC or 230 VAC +/- 10% @ 50 / 60 Hz (automatically detected and switched). Power consumption (On): 32 watts Power consumption (Standby): <1 watt * Dimensions: 17” wide x 6” high x 16.5” deep (includes feet and terminals). Boxed: 22 Wide x 19 Deep x 10 High

EMOTIVA XSP-1 GEN 2 Fully Differential Balanced Reference Stereo Preamplifier Preamp + remote ONLY. Loads of inputs. I changed to a different type of set up so this can go. Used for about 5 years or so. Very minor blemishes. Will say its EX condition. Folks rave about how quiet these are, but Ive always picked up on a faint noise on any input (youll definitely get some from the phono stage because it has serious gain and its supposed to be that way). This pre has served me well and one of the most versatile preamps out there. If you need specs you can look it up. Selling as-is and no returns.