Shipping: All items will be packed safely in a sturdy package for safe shipping.We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. I am selling parts from Garrard Type A turntable. Pls check the link below for more parts. If you need a part from the mechanism or dont see the part listed, shoot me a message. Click here for more Garrard Turntables and Parts This idler wheel for REPAIR/ RE-TYRING: shiny and flexible rubber, but rim has several flat spots, where the turntable was left in On position for a long time, Runs noisy and bumpy Comes from a Type A, used in most RC models from RC88 98 120 Type A to LAB 80Metal plating is shiny, bushing is tight and runs freely. Idler drive wheel for Garrard record changers. Replacement Comments:Replaces Garrard part 53883 used in Type A, Type A Mk II, A70, A70 Mk II, Lab80, Lab80 Mk II, RC88, RC88 Mk II, RC88/3, RC88/4, RC98, RC98/3, RC98/4, RC120, RC121, RC121/3, RC121/4, RC121/11, RC210, T11, TA Mk11, 4SP.Specifications:OD (inches): 2.250ID (inches): 0.170Height (inches): 0.550Thickness (inches): 0.105 I am selling parts from Garrard Type A turntable. Pls check the link below for more parts. If you need a part from the mechanism or dont see the part listed, shoot me a message. Click here for more Garrard Turntables and Parts All items will be safely packed to avoid any damage and promptly shipped. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Turntables, Catalogs, Phonograph Items, books and records! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Shipping: All items will be packed safely in a sturdy package for safe shipping.We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. I am selling parts and Owner/ Service Manuals from various Garrard turntables. Pls check the link below for more Lab 80 parts. If you need a part from the mechanism or dont see the part listed, shoot me a message. Click here for more Garrard Turntables, Parts and Manuals For sale is Original OWNERs USER MANUAL for GARRARD RC88/4 Turntable ORIGINAL, NOT A REPRODUCTION.Comes in original Envelope - Booklet 7 x 6 16 pages talks about specifications, set up, turntable operations, accessorieswhite card stock covers w orange print, coated paper w numerous b/w illustrations- Sheet 7 x 6 Fitting Instructions for the Garrard Multi-Purpose Plug-in Pickup Case Type MPM2 (Headshells)- Envelope 7 x 9.5 Condition: Booklet close to EXCELLENT, faint crease on back cover. Fitting sheet has a small crease. envelope has a defect on upper left side cornerPls check more cartridges and phono items in my other auctions. Buy with confidence. If not described accurately, I will refund your purchase price on the return of the item. Pls ask any questions you may have. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Books, Catalogs, Phonograph and Turntable Items! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. All items will be safely packed to avoid any damage and promptly shipped. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Shipping: All items will be packed safely in a sturdy package for safe shipping.We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. Click here for more Garrard Turntables and Parts Garrard 4 Pole Motor out of an RC88 Garrard turntable. this motor is the standard Garrard Motor for Garrard turntables from the early to mid 1950s e.g. RC88 RC121Does not fit the RC98 Check my other listings for the rubber insulators and mounting screws. Motor is tested and runs VERY quiet with no vibrations and great torque. Motor is very clean and no corrosion or other type of damage, bearings are nice and tight.Slight tarnishing on the plating of the mounting plateWill need some oiling and/or cleaning of bearings You are buying just the motor, all accessories have been removed and can be found in my other listings. There is plenty of wire left to connect the coils to the junction box. Motor will be securely packed for safe shipping. Pls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Books, Catalogs, Phonograph and Turntable Items! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Shipping: All items will be packed safely in a sturdy package for safe shipping.We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. I am selling parts from a Garrard Type A turntable. Pls check the link below for more Lab 80 parts. If you need a part from the mechanism or dont see the part listed, shoot me a message. Click here for more Garrard Turntables and Parts From a working GARRARD Type ATranscription TURNTABLE with the same form factor and mounting used in Garrard Turntables from about 1950-1960 This spark suppressor is used in Garrard 301 4HF Type A A70 RC88 98 120 121 210 Lab 80 (both the MKI and Mark II versions) value .05 mF +220 Ohms Capacitor has been tested and has no creep current or leakage, the resin filling is perfectly original, none of the dripping or oily residue on failing capacitors. Size: 3/4x 3/4 x 1 ( 1 1/8 incl mounting loop) about 5 wire leads long enough to connect them to the main switch Suppressor mounts under the main switch, it will fit over the longer screw of the switch CONDITION Item is in close to new condition, undamaged and uncorroded. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Books, Catalogs, Phonograph and Turntable Items! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Shipping: All items will be packed safely in a sturdy package for safe shipping.We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. Click here for more Garrard Turntables and Parts GARRARD RARE Three Pin HEADSHELL Part No. MPM2 used on the RC90 RC80M RC88 RC98 RC88/4 RC98/4 RC121Turntables with the round brown bakelite tonearm. Does not fit RC80 or earlier. May be used on some other models from the 1950s, pls check the service notes, or the wiring of the tonearm. 3 wire stereo has two signal wires and a common return ground.THIS HEADSHELL has the top hole with the black surround on top and two leads for GE VR and VR II cartridges with a turn over knob on top. For 3-pin stereo, a third lead can be added to the third pin This is the early Headshell ready for 3 pin stereo, used on early 1950s models. Pls check my other listings for the later ivory white headshells Part no MPM4 and MPM5 Garrards Description The Garrard type MPM2 is a multi-purpose pickup case (headshell) designed for use on model RC90, RC80M and RC111 three speed automatic record changers, also the model TA three speed single record player. The case will, with the aid of the accessories supplied with it, enable a wide range of pickup cartridges to be fitted. A thin Bakelite section known as a knockout, which can be easily broken away, is provided in the front of the case through which can pass the knob of turnover type cartridges. A hole is also located in the top of the case, covered by the Garrard name plate, for the knob of the turn round stylus type of cartridge. As this pickup case can easily be plugged in and out of the pickup arm, single stylus cartridges can be fitted having a separate case for each type of cartridge. CONDITION: Brown Bakelite plastic w molded handle. Front has opening for turnover handle for certain ceramic catridges. comes with two cartridge leads and clips for 2 wire mono. Clips fit the GE VR RPX and VR II. Does not have any cartridge mounting screws or hardware. Does not have the cover plate for the top opening.Headshell basically in new condition: Plastic is clean and glossy. No cracks, crazes or chipping. Pls check more turntable and phonograph items in my other auctions. Click here for more Garrard Turntables and Parts All items will be safely packed to avoid any damage and promptly shipped. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Books, Catalogs, Phonograph and Turntable Items! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Shipping: All items will be packed safely in a sturdy package for safe shipping.We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. This GARRARD Tone Arm Rest Support is from an RC88/4 turntable. This is the earlier support without the spring powered hold down hookThis support was used on all early to mid production RC models, only very late models have the later support Will fit all Garrard turntables from the early to mid 1950s e.g. RC88 RC98 RC120/121 , the RC80 uses a different style but this rest will fit. It is used on all turntables with the rounded brown bakelite headshell and brown tonearm. For a Tonearm rest for Type A RC209/210 A70 and Lab 80 check my other listings*** I am parting out a Garrad RC88 turntable, pls let me know if you need other parts ***Click here for more Garrard Turntables and PartsTone Arm Rest Support complete with mounting screw & washerClose to perfect condition, no damaged scratches or cracks. Pls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Books, Catalogs, Phonograph and Turntable Items! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Shipping: All items will be packed safely in a sturdy package for safe shipping.We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. Click here for more Garrard Turntables and PartsUltra Rare BROWN Plastic GARRARD Four Pin HEADSHELL Part No MPM5 used only on the Garrard RC88 MKII Turntable (which is basically a Type A in brown paint) This is a perfect example with a black grip and brown plastic body. Also has the embossed silver Garrard shield to cover the hole on top.Comes with an original Electrovoice flip over crystal cartridge Garrards Description The Garrard Type MPM5 Multi-Purpose pickup case has been designed for use on the Garrard Model RC210 and Type A automatic record changer. This pickup case will, with the aid of the accessories supplied with it. enable a wide range of pickup cartridges to be fitted. A thin bakelite section known as a knockout, which can be easily broken away, is provided in the front of the case through which can pass the knob of turnover type cartridges and a hole is located in the top of the case, covered by the Garrard name plate, for the knob of the turn round stylus type of cartridge. As this pickup case can easily be plugged in and out of the pickup arm, single stylus cartridges can be fitted having a separate case for each type of cartridge. Brown plastic with a red plastic handle. Silver embossed cover plate on top, and comes two two cartridge mounting screws. Pins and cartridge clips silver plated. Two leads are soldered to the cartridge, the other two leads are present with the orig Garrard clips Headshell in New condition: Plastic is clean and glossy. No chips cracks or other problems. Pls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Books, Catalogs, Phonograph and Turntable Items! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Hi, Im selling a vintage Garrard turntable / record changer headshell. Im nearly certain this headshell is for an RC88/4 and several other tables, but please ask questions and do your homework. This is a mono setup -- three pins. The top is open to accommodate the speed/stylus selection button of a cartridge such as the General Electric VR II. This sale is for the headshell only; no cartridge or stylus, no wires, etc.Free local pickup near Lenoir, NC, or Ill pack with care and ship insured via USPS Priority. Ill combine shipping with my other listed items. Message with questions and thanks for looking!

Vintage Audio UKVALVE AMPLIFIERS . TURNTABLES . LOUDSPEAKERS . VALVES TANNOY . QUAD . LEAK . GARRARD . SME . ROGERS . LOWTHER . DECCA MULLARD . BRIMAR . GEC . MAZDA . MARCONI WORLDWIDE SHIPPINGDescription Vintage Goldring Lenco G88 Transcription Idler Turntable Motor - No:8844Made in Switzerland - 1960sTurntable Speeds 16/33/45/78 Classic Goldring G88 turntable similar to Garrard 301/401 turntables.Motor has been tested working but I would recommend a full service before use due to the age. All parts are original sold for service repair . Please check photos.The Goldring 88 transcription turntable is often ignored and under-rated but is actually a fantastic turntable. The 88 was the top of Goldrings range and made by Lenco in Switzerland. It was designed to compete directly with the Garrard 301 and the Thorens TD-124. HiFi World mention it in the same breath as both the Garrard 401 and the Technics SL10 which gives you an idea of how good a reputation these turntables have. An idler wheel is used to drive a platter weighing 8lb ( 3.6kg ). The heavy weight of the platter helps to give very low wow and flutter, leading to accurate sound. It also provides very solid bass response. Sound quality is excellent.Please check the photos I Will Ship Worldwide!Check my other auctions for vintage audio. Shipping Policy Worldwide postage through eBay global shipping programme. All items are sent within 3-5 days of auction ending. All orders are tracked with DHL, UPS, DPD or Royal Mail with protective packing for transit. Thank you for looking, please check my other eBay auctions Vintage Audio UK BRITISH AUDIO SPECIALISTS FOR 25 YEARS

Garrard Turntable Center Post A70 TYPE A RC88 Multi Play SPINDLE. Great pre owned condition. This came of of a Garrard Type A70. Thanks

Shipping: All items will be packed safely in a sturdy package for safe shipping.We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. I am selling parts and Owner/ Service Manuals from various Garrard turntables. Pls check the link below for more Lab 80 parts. If you need a part from the mechanism or dont see the part listed, shoot me a message. Click here for more Garrard Turntables, Parts and Manuals For sale is Original OWNERs USER MANUAL for GARRARD RC88/4 Turntable ORIGINAL, NOT A REPRODUCTION.Comes in original Envelope - Booklet 7 x 6 16 pages talks about specifications, set up, turntable operations, accessorieswhite card stock covers w orange print, coated paper w numerous b/w illustrations- Sheet 7 x 6 Fitting Instructions for the Garrard Multi-Purpose Plug-in Pickup Case Type MPM2 (Headshells)- Envelope 7 x 9.5 Condition: Booklet close to EXCELLENT, faint crease on back cover. Fitting sheet has a small crease. envelope has a defect on upper left side cornerPls check more cartridges and phono items in my other auctions. Buy with confidence. If not described accurately, I will refund your purchase price on the return of the item. Pls ask any questions you may have. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Books, Catalogs, Phonograph and Turntable Items! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. All items will be safely packed to avoid any damage and promptly shipped. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Offered for your consideration is one (1) GARRARD Type LRS3 Large Record Spindle, manufactured in England c.1967. This spindle is for playing large hole 7” 45 RPM records on GARRARD’s RC88 and RC98 record changers. The spindle comes in its retail box with sealed-bag spring clips and loose small rod, both of which I believe are original. It bears the old box that refers to four wood screws when only two are included in the bag with the, evidently, revised clips (or the print was an error all along?). The later box looks identical and has the screw quantity corrected to two. I just wanted to let you know that, unlike most sellers, I’m not oblivious to details, no matter how small. So, please have a look at my large photos and read the remaining description to decide if this useful GARRARD record changer accessory should be yours. This GARRARD LRS3 is in clean, excellent condition. There are no dings, cracks, or noteworthy scratches to the sturdy cream-colored metal and plastic housing, just some tiny, practically invisible marks from the years, as pictured. It’s in such nice shape that I can’t even be certain it’s ever been used? Overall, it presents exceptionally well. As pictured and described, this GARRARD LRS3 Large Record Spindle is offered at a competitive price. Terms of Sale: I encourage interested parties to ask any questions they may have about this listing before committing to purchase. Payment is due at checkout by PayPal or other accepted methods. U.S. mailing addresses will pay $8.95 for very carefully packed shipping via U.S. Postal Service with tracking and delivery confirmation. International purchases accepted only from those who are able to pay with PayPal including shipping by U.S. Postal Service First Class Parcel Air Mail. Thanks for looking!

Shipping: All items will be packed safely in a sturdy package for safe shipping.We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. I am parting out a Garrad RC88 turntable, pls let me know if you need other parts ***Click here for more Garrard Turntables and PartsThis GARRARD TONEARM is from an RC88/4 turntable. Will fit all Garrard turntables from the early to mid 1950s e.g. RC88 RC98 RC121 For Tone arms for the Type A A70 and Lab 80 check my other listingsTONE ARM UPPER PART to horizontal pivots. Complete with all screws, tonearm wire leads and counterbalance springWired for Mono, cable about 12 long, but stereo ready, just wire another pair of wires to the 3 pin headshell socket.Includes both horizontal pivot screws.Cast Aluminum, brown paint, overall lenghth 7 Close to perfect condition, all parts are there, no corrosion. Paint is in perfect shape. Tested works great Pls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Books, Catalogs, Phonograph and Turntable Items! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Shipping: All items will be packed safely in a sturdy package for safe shipping.We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. I am parting out a Garrad RC88 turntable, pls let me know if you need other parts ***Click here for more Garrard Turntables and PartsThis GARRARD INDEX ARM Size Feeler is from an RC88/4 turntable. Will fit all Garrard turntables from the early to mid 1950s e.g. RC88 RC98 RC121 Cast Aluminum, brown paint, overall lenghh 4 1/4 Height 5 Close to perfect condition, no corrosion. Paint is in perfect shape.Plastic feeler tip not included Pls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Books, Catalogs, Phonograph and Turntable Items! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Shipping: All items will be packed safely in a sturdy package for safe shipping.We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. I am parting out a Garrad RC88 turntable, pls let me know if you need other parts ***Click here for more Garrard Turntables and PartsThis is the brown bakelite Knob that sits on top of the SPEED SELECTOR lever, and the Start Stop and Manual Auto levers.It is from an RC88/4 turntable. Will fit all Garrard turntables with brown trim from the early to mid 1950s e.g. RC88 RC98 RC121 Knob is simply pressed on the vertical part of the lever. All 3 knobs are identical and interchangeableMolded brown plastic bakelite, white etched printing, size 5/16x 1/4 3/8 high,CONDITION: Visually great condition, bakelite is in perfect shape, no crackes or scratches Pls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Books, Catalogs, Phonograph and Turntable Items! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Shipping: All items will be packed safely in a sturdy package for safe shipping.We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. This is an important part of the Main Turntable bearing, comes from a Garrard Lab 80: LOWER MAIN BEARING WASHER with rubber Insulation ringThis part is used in most Garrard turntables from 1950- 1960, Lab 80 & Mk II Type A A70 RC 88 98 121 210 This is the washer that sits below the penolic ring and the 5 bearing balls. It is the part that transmits the weight of the turntable to the chassis. It is the lower race of the main thrust bearing. The rubber rings prevents turntable rumble to be transmitted to the main chassis and the tonearm. Pls note that the upper race and the lower race are not identical, the upper race has a wider inner diameter The actual washer and rubber ring is shown in pictures 2 and 3. For illustration I am showing the main shaft and the bearing assembly. THIS SALE IS FOR THE WASHER and RUBBER RING ONLY Hardened Steel Outer Diameter 5/8 inner diameter about 7/16 CONDITION: very clean, tested runs great. no wear or grooves on the washer. Rubber ring very flexible and undamaged. I am selling parts from a Garrard Lab 80 turntable. Pls check the link below for more Lab 80 parts. If you need a part from the mechanism or dont see the part listed, shoot me a message. Click here for more Garrard Turntables and Parts Item will be carefully boxed for safe shipping. All items will be safely packed to avoid any damage and promptly shipped. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Turntables, Catalogs, Phonograph Items, books and records! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Shipping: All items will be packed safely in a sturdy package for safe shipping.We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. I am selling parts from a Garrard Lab TYPE A turntable. Pls check the link below for more Lab 80 parts. If you need a part from the mechanism or dont see the part listed, shoot me a message. Click here for more Garrard Turntables and Parts FROM A Garrard TYPE A turntable.This is the main conical TURNTABLE SHAFT on which the MAIN PLATTER sits. This is the standard version used on most turntables from the 1950s, e.g. TYPE A RC88 RC120 RC98 basically anything after RC80 and before LAB 80This is a main part of the platter bearing. Pls note that for proper function you will also need the upper bearing race washer, which fits at the bottom of the shaft. Without this, the turntable will not run on the bearing balls. Pls check my other listings CONDITION: Close to new condition, very clean, tested runs great. Light scuffing of the outer surface The inner bronze bearings are in perfect shape, smooth without scratches. Item will be carefully boxed for safe shipping. All items will be safely packed to avoid any damage and promptly shipped. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Turntables, Catalogs, Phonograph Items, books and records! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Shipping: All items will be packed safely in a sturdy package for safe shipping.We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. I am parting out a Garrad RC88 turntable, pls let me know if you need other parts ***Click here for more Garrard Turntables and PartsRare FIRST GENERAITON GARRARD 3 Speed SPEED SELECTOR PLATE Trim is from an RC88 turntable. This is for the first generation Garrard turntables having 3 Speeds: 78/ 45/ 33 Will fit all 3-speed Garrard turntables from the early to mid 1950s e.g. RC88 RC98 RC121 Does not fit any turntable with the /4 mode, e.g. RC88/4 Molded brown plastic bakelite., white etched printing, size 3 x 2 7/8 distance of posts 2.75 Visually great condition, Paint is in perfect shape, some inconspicuous faint scuffing.Comes with two metal fasteners Pls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Books, Catalogs, Phonograph and Turntable Items! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Shipping: All items will be packed safely in a sturdy package for safe shipping.We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. I am parting out a Garrad RC88 turntable, pls let me know if you need other parts ***Click here for more Garrard Turntables and PartsThis GARRARD TONEARM is from an RC88/4 turntable. Will fit all Garrard turntables from the early to mid 1950s e.g. RC88 RC98 RC121 For Tone arms for the Type A A70 and Lab 80 check my other listingsTONE ARM UPPER PART to horizontal pivots. Complete with all screws, tonearm wire leads and counterbalance springWired for Mono, cable about 12 long, but stereo ready, just wire another pair of wires to the 3 pin headshell socket.Includes both horizontal pivot screws.Cast Aluminum, brown paint, overall lenghth 7 Close to perfect condition, all parts are there, no corrosion. Paint is in perfect shape. Tested works great Pls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Books, Catalogs, Phonograph and Turntable Items! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Shipping: All items will be packed safely in a sturdy package for safe shipping.We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. I am selling parts and Owner/ Service Manuals from various Garrard turntables. Pls check the link below for more Lab 80 parts. If you need a part from the mechanism or dont see the part listed, shoot me a message. Click here for more Garrard Turntables, Parts and Manuals For sale is Original OWNERs USER MANUAL for GARRARD RC88/4 Turntable ORIGINAL, NOT A REPRODUCTION.Comes in original Envelope - Booklet 7 x 6 16 pages talks about specifications, set up, turntable operations, accessorieswhite card stock covers w orange print, coated paper w numerous b/w illustrations- Sheet 7 x 6 Fitting Instructions for the Garrard Multi-Purpose Plug-in Pickup Case Type MPM2 (Headshells)- Envelope 7 x 9.5 Condition: Booklet close to EXCELLENT, faint crease on back cover. Fitting sheet has a small crease. envelope has a defect on upper left side cornerPls check more cartridges and phono items in my other auctions. Buy with confidence. If not described accurately, I will refund your purchase price on the return of the item. Pls ask any questions you may have. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Books, Catalogs, Phonograph and Turntable Items! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. All items will be safely packed to avoid any damage and promptly shipped. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Shipping: All items will be packed safely in a sturdy package for safe shipping.We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. I am parting out a Garrad RC88 turntable, pls let me know if you need other parts ***Click here for more Garrard Turntables and PartsThis GARRARD INDEX ARM Size Feeler is from an RC88/4 turntable. Will fit all Garrard turntables from the early to mid 1950s e.g. RC88 RC98 RC121 Cast Aluminum, brown paint, overall lenghh 4 1/4 Height 5 Close to perfect condition, no corrosion. Paint is in perfect shape.Plastic feeler tip not included Pls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Books, Catalogs, Phonograph and Turntable Items! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Shipping: All items will be packed safely in a sturdy package for safe shipping.We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. I am selling parts from a Garrard Type A & RC88 turntable. Pls check the link below for more parts. If you need a part from the mechanism or dont see the part listed, shoot me a message. Click here for more Garrard Turntables and Parts GARRARD PLATTER for Turntables GARRARD RC 88 98 120 121This is the brown painted platter used as a turntable, it will also fit as subplatter on the Garrard A70 Type A, This platter is painted brown and comes from an early RC88/4 turntable. Tested, runs absolutely true. Diameter 9 1/8, height 7/8, weight about 1 1/2 lbsCONDITION Item is in close to new condition, undamaged and paint perfect, only a few faint scuffs inside the raised hub. . Pls check my other listings for more Turntable and Phonograph items. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Books, Catalogs, Phonograph and Turntable Items! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Shipping: All items will be packed safely in a sturdy package for safe shipping.We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. I am selling parts from a Garrard Lab TYPE A turntable. Pls check the link below for more Lab 80 parts. If you need a part from the mechanism or dont see the part listed, shoot me a message. Click here for more Garrard Turntables and Parts FROM A Garrard TYPE A turntable.This is the main TURNTABLE SHAFT on which the MAIN PLATTER sits. The spindle gets inserted inside the shaft.Pls refer to the last picture for all parts of the main bearing assembly (available in my other listings. This is the standard version used on most turntables from the 1950s, e.g. TYPE A RC88 RC120 RC98 basically anything after RC80 and before LAB 80This is a main part of the platter bearing. polished steel shaft 2.5 long 3/8 CONDITION: Close to new condition, perfect polish with no scratches wear or corrosion Item will be carefully boxed for safe shipping. All items will be safely packed to avoid any damage and promptly shipped. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Turntables, Catalogs, Phonograph Items, books and records! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Shipping: All items will be packed safely in a sturdy package for safe shipping. We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. This is an important part of the Main Turntable bearing This part is used in most Garrard turntables from 1950- 1960, Lab 80 & Mk II Type A A70 RC 88 98 121 210 This is the washer that sits loosely on the main platter shaft. It is the upper race of the main thrust bearing. Often it gets lost, when the bearing is disassembled. Without this washer, the turntable will not ride on the bearing balls but slide metal on metal. The actual washer is shown in pictures 2 and 3. For illustration I am showing the main shaft and the bearing assembly. THIS SALE IS FOR THE WASHER ONLY Hardened Steel Outer Diameter 5/8 inner diameter about 3/8 CONDITION: very clean, tested runs great. no wear or grooves on the washer I am selling parts from a Garrard Lab 80 turntable. Pls check the link below for more Lab 80 parts. If you need a part from the mechanism or dont see the part listed, shoot me a message. Click here for more Garrard Turntables and Parts Item will be carefully boxed for safe shipping. All items will be safely packed to avoid any damage and promptly shipped. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Turntables, Catalogs, Phonograph Items, books and records! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution