2 Garrard Type A / AII / 210 Headshells w/ Finger-Lifts This listing is for two used Garrard Type A (AII) / 210 headshells. I have cleaned both of them as best that I could. Both have stains on them. I also cleaned the contact pins. Neither of them have any cracks. I would rate their condition as fair. The cartridge leads will probably need some work done to them. Both have finger-lifts. I believe it will fit a Type A, AII, or 210 model Garrard turntables. It is the buyers’ responsibility to make certain these headshells will fit their intended turntable. I do not ship outside of the United States or accept PayPal payments from non-U.S. registered accounts, even if your eBay or PayPal “confirmed” shipping address is inside the U.S. SOLD “AS SHOWN” & “AS IS” I am not the original owner of most of the items I sell & I cannot guarantee THIS item is from a PET, CHILD, or SMOKE FREE environment. If you receive an item & there is an issue, PLEASE contact me BEFORE you leave feedback. Please check my other current listings. IT IS YOUR RESPONSIBILITY TO READ MY AUCTION TERMS. By BIDDING ON or using the BIN “Buy It Now” feature (If available) You ARE agreeing to My Auction Terms which are posted below. MY AUCTION TERMS: ALL ITEMS ARE SHIPPED BY USPS First Class Mail TO YOUR “confirmed” PAYPAL ACCOUNT ADDRESS. Bidding: U.S. registered eBay & PayPal accounts ONLY. If you bought the wrong item, decided you do not want the item, or you hoped it was more than I stated in the listing, the item is yours to do whatever you like with it, with the exception of returning it to me &/or asking for a refund. Any unpaid item cases or cancelled winning bids/BINs will result in the buyer being permanently blocked from bidding on or buying any of my items. Warranty: Every item that I list is sold “AS SHOWN” & “AS IS” with NO WARRANTY, expressed or implied, unless I state a specific warranty within the description of the listed item in the auction. I spend a lot of time trying to describe all of the items that I list as accurately as I can. I am definitely not perfect & I do make mistakes. If you have ANY questions, need more information, or would like to see additional photos of the item that I have listed, ask me BEFORE you bid. I do not list any item that I know does not work as working. If the item is listed as USED or Refurbished, I cannot guarantee the item will work when you receive it as things can during the shipping process & vintage electronics can fail at any time. I do not accept returns; provide refunds (full or partial) or exchanges, with the exception of SNAD claims. If you win a SNAD claim, you will need to return the item to me packaged in the same way as your received it & in the same physical & functional condition as you claim you received the item. I will make a video of the unpacking & testing of ALL returned items to verify the condition of the item. ANY discrepancies will be reported to eBay. Payment: My PayPal account is set up to BLOCK payments from all non-U.S. registered PayPal accounts. I will only accept payment by a PayPal account that is REGISTERED within the U.S. States & has a “confirmed” address. Shipping: I will only ship your item to your PayPal “confirmed” address & the item will be shipped by USPS First Class Mail. Any item OR combination of items that sells for more than $74.99 will require an adults’ signature. I will not ship outside the United States. I do not charge for packaging, nor do I charge a handling fee. Everything I have posted on eBay is in my possession. I will usually ship your item within 3 “business days” (NOT including Saturday, Sunday, or Holidays) after I have received your payment.

I am selling a 1960s Garrard Type A record changer with original wood base for parts/repair. It is missing the original spindle. It might be missing other parts unknown to me. Selling as is and untested. No returns.

It is a vintage Garrard 210 Type A turntable/record changer. Selling as is. No returns.

It is a vintage Garrard 210 Type A turntable/record changer. Selling as is. No returns.

I am selling a 1960s Garrard Type A record changer with original wood base for parts/repair. It is missing the original spindle. It might be missing other parts unknown to me. Selling as is and untested. No returns.

+)+)+ Auction is for )+)+)+ +)> I WILL SHIP WORLDWIDE <(+ # I AM LOCATED NOT IN USA SO PLEASE DONT CHARGE UNTIL RECEIVE INVOICE ! THIS AUCTION IS FOR : Grease for Garrard 301 Hammertone Type and Early Grease Type Turntable PLEASE REFER PHOTOS SOUND IS GREAT MADE IN ENGLAND SOLD AS IS # GRADED: M(SEALED) / NM / EX / VG / G ***=*=*=*=*=*=*=*** +)>>>>> SHIP TO WORLDWIDE <<<<<(+ # I am located not in USA, so mentioned shipping cost is not correct ! SHIPPING COST - AIR MAIL(1LP) Asia : $14 Oceania : $16 Middle East : $16 Europe : $ 18 North America: $ 18 South America: $ 20 << Additional $ 3.00 for each additional record title >> ** Thank you! & GOOD LUCK^^

+)+)+ Auction is for )+)+)+ +)> I WILL SHIP WORLDWIDE <(+ # I AM LOCATED NOT IN USA SO PLEASE DONT CHARGE UNTIL RECEIVE INVOICE ! THIS AUCTION IS FOR : Grease for Garrard 301 Hammertone Type and Early Grease Type Turntable PLEASE REFER PHOTOS SOUND IS GREAT MADE IN ENGLAND SOLD AS IS # GRADED: M(SEALED) / NM / EX / VG / G ***=*=*=*=*=*=*=*** +)>>>>> SHIP TO WORLDWIDE <<<<<(+ # I am located not in USA, so mentioned shipping cost is not correct ! SHIPPING COST - AIR MAIL(1LP) Asia : $14 Oceania : $16 Middle East : $16 Europe : $ 18 North America: $ 18 South America: $ 20 << Additional $ 3.00 for each additional record title >> ** Thank you! & GOOD LUCK^^

I am selling a 1960s Garrard Type A record changer with original wood base for parts/repair. It is missing the original spindle. It might be missing other parts unknown to me. Selling as is and untested. No returns.

It is a vintage Garrard 210 Type A turntable/record changer. Selling as is. No returns.

+)+)+ Auction is for )+)+)+ +)> I WILL SHIP WORLDWIDE <(+ # I AM LOCATED NOT IN USA SO PLEASE DONT CHARGE UNTIL RECEIVE INVOICE ! THIS AUCTION IS FOR : Grease for Garrard 301 Hammertone Type and Early Grease Type Turntable PLEASE REFER PHOTOS SOUND IS GREAT MADE IN ENGLAND SOLD AS IS # GRADED: M(SEALED) / NM / EX / VG / G ***=*=*=*=*=*=*=*** +)>>>>> SHIP TO WORLDWIDE <<<<<(+ # I am located not in USA, so mentioned shipping cost is not correct ! SHIPPING COST - AIR MAIL(1LP) Asia : $14 Oceania : $16 Middle East : $16 Europe : $ 18 North America: $ 18 South America: $ 20 << Additional $ 3.00 for each additional record title >> ** Thank you! & GOOD LUCK^^

+)+)+ Auction is for )+)+)+ +)> I WILL SHIP WORLDWIDE <(+ # I AM LOCATED NOT IN USA SO PLEASE DONT CHARGE UNTIL RECEIVE INVOICE ! THIS AUCTION IS FOR : Grease for Garrard 301 Hammertone Type and Early Grease Type Turntable PLEASE REFER PHOTOS SOUND IS GREAT MADE IN ENGLAND SOLD AS IS # GRADED: M(SEALED) / NM / EX / VG / G ***=*=*=*=*=*=*=*** +)>>>>> SHIP TO WORLDWIDE <<<<<(+ # I am located not in USA, so mentioned shipping cost is not correct ! SHIPPING COST - AIR MAIL(1LP) Asia : $14 Oceania : $16 Middle East : $16 Europe : $ 18 North America: $ 18 South America: $ 20 << Additional $ 3.00 for each additional record title >> ** Thank you! & GOOD LUCK^^

Shipping: All items will be packed safely in a sturdy package for safe shipping.We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. I am selling parts from a Garrard Lab TYPE A turntable. Pls check the link below for more Lab 80 parts. If you need a part from the mechanism or dont see the part listed, shoot me a message. Click here for more Garrard Turntables and Parts FROM A Garrard TYPE A turntable.This is the main TURNTABLE SHAFT on which the MAIN PLATTER sits. The spindle gets inserted inside the shaft.Pls refer to the last picture for all parts of the main bearing assembly (available in my other listings. This is the standard version used on most turntables from the 1950s, e.g. TYPE A RC88 RC120 RC98 basically anything after RC80 and before LAB 80This is a main part of the platter bearing. polished steel shaft 2.5 long 3/8 CONDITION: Close to new condition, perfect polish with no scratches wear or corrosion Item will be carefully boxed for safe shipping. All items will be safely packed to avoid any damage and promptly shipped. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Turntables, Catalogs, Phonograph Items, books and records! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Shipping: All items will be packed safely in a sturdy package for safe shipping.We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. This is an important part of the Main Turntable bearing, comes from a Garrard Lab 80: LOWER MAIN BEARING WASHER with rubber Insulation ringThis part is used in most Garrard turntables from 1950- 1960, Lab 80 & Mk II Type A A70 RC 88 98 121 210 This is the washer that sits below the penolic ring and the 5 bearing balls. It is the part that transmits the weight of the turntable to the chassis. It is the lower race of the main thrust bearing. The rubber rings prevents turntable rumble to be transmitted to the main chassis and the tonearm. Pls note that the upper race and the lower race are not identical, the upper race has a wider inner diameter The actual washer and rubber ring is shown in pictures 2 and 3. For illustration I am showing the main shaft and the bearing assembly. THIS SALE IS FOR THE WASHER and RUBBER RING ONLY Hardened Steel Outer Diameter 5/8 inner diameter about 7/16 CONDITION: very clean, tested runs great. no wear or grooves on the washer. Rubber ring very flexible and undamaged. I am selling parts from a Garrard Lab 80 turntable. Pls check the link below for more Lab 80 parts. If you need a part from the mechanism or dont see the part listed, shoot me a message. Click here for more Garrard Turntables and Parts Item will be carefully boxed for safe shipping. All items will be safely packed to avoid any damage and promptly shipped. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Turntables, Catalogs, Phonograph Items, books and records! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Shipping: All items will be packed safely in a sturdy package for safe shipping.We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. I am parting out a Garrad RC88 turntable, pls let me know if you need other parts ***Click here for more Garrard Turntables and PartsThis GARRARD Speed SELECTOR LEVER KNOB is from a TYPE A turntable. (THE COVER IS FOR ILLUSTRATION ONLY - NOT INCLUDED) Will fit also Garrard turntables RC209 and 210Sits on top of the Speed Selector lever of the turntableMolded tan plastic, polished aluminum scale, size 3/4 x 3/8, 3/8 highThe knob is just pressed onto the end of the L-shaped speed leverlCONDITIONClose to new condition, no chips cracks or scratches Pls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Books, Catalogs, Phonograph and Turntable Items! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Shipping: All items will be packed safely in a sturdy package for safe shipping.We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. I am selling parts from a Garrard Lab TYPE A turntable. Pls check the link below for more Lab 80 parts. If you need a part from the mechanism or dont see the part listed, shoot me a message. Click here for more Garrard Turntables and Parts FROM A Garrard TYPE A turntable.This is the main conical TURNTABLE SHAFT on which the MAIN PLATTER sits. This is the standard version used on most turntables from the 1950s, e.g. TYPE A RC88 RC120 RC98 basically anything after RC80 and before LAB 80This is a main part of the platter bearing. Pls note that for proper function you will also need the upper bearing race washer, which fits at the bottom of the shaft. Without this, the turntable will not run on the bearing balls. Pls check my other listings CONDITION: Close to new condition, very clean, tested runs great. Light scuffing of the outer surface The inner bronze bearings are in perfect shape, smooth without scratches. Item will be carefully boxed for safe shipping. All items will be safely packed to avoid any damage and promptly shipped. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Turntables, Catalogs, Phonograph Items, books and records! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Shipping: All items will be packed safely in a sturdy package for safe shipping.We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. *** I am parting out a Garrad TYPE A turntable, pls let me know if you need other parts ***Click here for more Garrard Turntables and PartsGARRARD TYPE A 1x CHASSIS SUSPENSION SPRING (Up to 4 available) Lower part spring and flat spring steel clips into mounting board or plinth, upper, spring supports chassis. Steel screw with paper washer Total length about 1.5, length above mounting board .75, below mounting board .75Per Garrard Mounting instructions: Diameter hole required: 3/4, maximal thickness of mounting board: 1/2Contains: Lower spring with screw shaft, upper spring and washer. Very clean condition, screw shiny, springs are strong and undamaged. Pls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Books, Catalogs, Phonograph and Turntable Items! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Shipping: All items will be packed safely in a sturdy package for safe shipping.We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. I am parting out a Garrad RC88 turntable, pls let me know if you need other parts ***Click here for more Garrard Turntables and PartsThis GARRARD Speed SELECTOR Trim is from a TYPE A turntable. Will fit also Garrard turntables RC209 and 210Covers the Speed Selector lever of the turntableMolded tan plastic, polished aluminum scale, size 2 1/4 x 7/8Garrard mounted these by twisting the little tabs of the cover plate. Those tabs break off when removing the cover.Tabs are still about 2mm long and will seat cover securely on the chassis. A drop of contact cement or superglue will hold it in place.Otherwise:Close to new condition,aluminum scale in perfect shape. Pls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Books, Catalogs, Phonograph and Turntable Items! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Shipping: All items will be packed safely in a sturdy package for safe shipping.We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. I am parting out a Garrad RC88 turntable, pls let me know if you need other parts ***Click here for more Garrard Turntables and PartsThis GARRARD ON/ OFF/ AUTOMATIC REJECT SELECTOR Trim is from a TYPE A turntable. Will fit also Garrard turntables RC209 and 210Covers the Manual Off On and Automatic Off - On Reject levers of the turntableMolded tan plastic, raised black Garrard logo and polished aluminum, size 3 x 1 1/2Garrard mounted these by twisting the little tabs of the cover plate. Those tabs break off when removing the cover.Tabs are still about 2mm long and will seat cover securely on the chassis. A drop of contact cement or superglue will hold it in place.Otherwise:Close to new condition,aluminum and Garrard logo in perfect shape. Pls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Books, Catalogs, Phonograph and Turntable Items! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Shipping: All items will be packed safely in a sturdy package for safe shipping.We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. I am parting out a Garrad Type A turntable, pls let me know if you need other parts ***Click here for more Garrard Turntables and PartsThis GARRARD Type A AUTOMATIC On REJECT/ Off THIS IS THE RIGHT SIDE ONE of the two levers. They are different. This one has a small groove at the bottom where the screwed collar fits Will fit also Garrard turntables RC209 and 210Molded tan plastic knob on metal lever and round shaftCONDITIONClose to new condition, plastic knob in great shape, metal shiny and uncorroded, Pls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Books, Catalogs, Phonograph and Turntable Items! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Shipping: All items will be packed safely in a sturdy package for safe shipping.We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. I am parting out a Garrad Type A turntable, pls let me know if you need other parts ***Click here for more Garrard Turntables and PartsThis GARRARD Type A MANUAL ON/ OFF lever. THIS IS THE LEFT ONE of the two levers. They are different. This one has a small C clip at the bottom Will fit also Garrard turntables RC209 and 210Molded tan plastic knob on metal lever and round shaftCONDITIONClose to new condition, plastic knob in great shape, metal shiny and uncorroded, comes with original C Clip Pls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Books, Catalogs, Phonograph and Turntable Items! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Shipping: All items will be packed safely in a sturdy package for safe shipping.We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. FIRST PICTURE FOR ILLUSTRATION ONLY, Screw and TONEARM NOT INCLUDED.This tiny 4mm coil spring and 1/16 bearing ball sit inside the tonearm bushing facing inwards, when the tonearm is removed, these parts usually just fly away.The spring provides the necessary tension to the tonearm bearing, so that the bearing is tight. Without the spring, the tonearm bearing will be sloppy, which affects the sound reproduction.These parts come from a GARRARD Type A Transcription turntable. Also used on the Type A 4HF Turntable and TPA12 Tonearm Click here for more Garrard Turntables and Parts Condition: close to newPls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Books, Catalogs, Phonograph and Turntable Items! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Shipping: All items will be packed safely in a sturdy package for safe shipping. We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. This is an important part of the Main Turntable bearing This part is used in most Garrard turntables from 1950- 1960, Lab 80 & Mk II Type A A70 RC 88 98 121 210 This is the washer that sits loosely on the main platter shaft. It is the upper race of the main thrust bearing. Often it gets lost, when the bearing is disassembled. Without this washer, the turntable will not ride on the bearing balls but slide metal on metal. The actual washer is shown in pictures 2 and 3. For illustration I am showing the main shaft and the bearing assembly. THIS SALE IS FOR THE WASHER ONLY Hardened Steel Outer Diameter 5/8 inner diameter about 3/8 CONDITION: very clean, tested runs great. no wear or grooves on the washer I am selling parts from a Garrard Lab 80 turntable. Pls check the link below for more Lab 80 parts. If you need a part from the mechanism or dont see the part listed, shoot me a message. Click here for more Garrard Turntables and Parts Item will be carefully boxed for safe shipping. All items will be safely packed to avoid any damage and promptly shipped. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Turntables, Catalogs, Phonograph Items, books and records! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Shipping: All items will be packed safely in a sturdy package for safe shipping.We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. This GARRARD TONE ARM 1x HORIZONTAL PIVOT SCREW comes from a Type A Transcription turntable. Also used on the Type A 4HF Turntable and TPA12 Tonearm FIRST PICTURE FOR ILLUSTRATION ONLY, TONEARM NOT INCLUDED.Up to 2 screws available, contact me for combined shipping*** I am parting out a Garrad Type A turntable, pls let me know if you need other parts *** Click here for more Garrard Turntables and Parts Specifications Plated Steel, slotted head .325 diameter, threaded shaft .175 diameter, smooth shaft .075 diameterCondition: close to newPls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Books, Catalogs, Phonograph and Turntable Items! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution