HANA ML Cartridge.StylusNude Microline TipCantileverAluminumMagnetic CircuitryPure Iron/Cryo TreatmentCoil WireHigh Purity CopperCartridge HousingPOM (Delrin) / BrassOutput Level0.4mv/1KHzOutput Balance<1dB/1KHzTrackability70 µm/2gChannel Separation30dB/1KHzFrequency Response12-45,000HzImpedance7?/1KHzSuggested Load Impedance>100?MagnetAlnicoTracking Force2 gramsWeight9.5 gramsHeight16.3 mm 30 hours less used. Unused Accessory and perfect box. International Free shipping with tracking information.

Hi, for sale - Hana ML - MC Low Output cartridge or MH - Hi output! Full packing, all accessories included. The Hana ML cartridge has several advanced product features (Over E and S series HANA Moving Coil cartridges) that take the sound fidelity and musical enjoyment to new heights, continuing to offer a superb sound quality v. price at its higher price point. The ‘Micro-Line’ stylus design (shaped like the cutting head when the metal master LP is being produced), fits precisely into the vinyl groove to capture the very smallest details, offering better frequency reproduction and less distortion.The Hana M Series cartridge bodies are made from black polyoxymethylene (POM) which is a hard and extremely rigid, low resonance thermoplastic manufactured by DuPont under the trade name ‘Delrin’. There is a gold-plated copper resonance plate integral with the cartridge body that further reduces distortion from vibrations.Very high-quality copper wire has been selected for MH/ML moving coils, offering greater clarity of sound, thanks to its lower distortion of the musical signal. Parts such as the front yoke, centre and rear components of the magnetic electro-motive circuit and wires are Cryogenically processed, this is a ‘cold annealing’ process at near absolute zero temperature restructures metals at the molecular level, resulting in lower sound distortion. The result is a more precise and musical sound quality.There are captive threaded nuts for head shell fixing screws, these are built into the cartridge body offering easy mechanical fixing to the Tonearm head-shell.The ML (Micro-Line Low output) offers 0.4mv/1KHz output. Post to all Worldwide.

Hana ML LOMC Moving Coil Cartridge Microline Stylus. Barely Used (Less than 10 hours) Building upon the foundation of the critically acclaimed HANA sound, the ML aspires toward affordable perfection and represents the further evolution of the “Brilliant and Gorgeous” quality that has earned HANA its worldwide reputation. M Series Nude Microline stylus – Higher Specification Part Befitting its name, the M Series uses a Nude Microline stylus, mimicking the cutting stylus and fitting more precisely into the vinyl groove. This enhances tracking to capture the most delicate musical details with better frequency reproduction, stereo imaging, and resolution. High Purity copper wire – Higher Specification Part Very high-purity copper wire is used for winding the ML coil with a new low-impedance generator for optimized performance with a broader range of phono preamps Delrin© cartridge body – Advanced Materials The M Series cartridge body is injection molded from Delrin©, a high-tech polymer with improved mechanical characteristics for better resonance damping, to reveal more low-level information and enhance dynamic range. Cryogenic Processing - Unique Technical Treatment Cryogenic processing is Cold Annealing at near absolute zero temperature that restructures metals at the molecular level, especially important in the Alnico-based magnetic electro-motive circuit (cartridge signal generator). The M Series parts treated include the front yoke as well as the center and rear components. The result is a more precise and controlled magnetic flux field for greater linearity and musical sound quality. Brass Cap with Threaded fittings - Superior Mechanical Interface The Delrin© cartridge body features a machined brass cap providing constrained mode layer damping and its heavier 9.5 gram weight provides expanded compatibility with a wider range of tonearms and turntables. Built into the M Series Delrin© cartridge body are metal threaded fittings for headshell mounting hardware, offering easier attachment and a superior mechanical interface for better bass and dynamics.SpecsStylusMicrolineCantileverAluminumMagnetic CircuitryPure Iron/Cryo TreatmentCoil WireHigh Purity CopperCartridge HousingPOM (Delrin) / BrassOutput Level0.4mv/1kHzOutput Balance<1dB/1 KHzTrackability70 µm/2gChannel Separation30dB/1kHzFrequency Response12-45,000HzImpedance7?/1kHzSuggested Load Impedance>100?MagnetAlnicoVertical Tracking Force2gCartridge Weight9.5gHeight16.3mmBody ColorBlack w/Brass Plate

Item Description Hana ML Low Output Moving Coil CartridgeExcellent overall condition, one careful owner from new. Supplied in original packaging and shipped via FREE fully insured courier service. Please note we cannot be 100% sure how many hours this has been used for but we can confirm the cartridge is just 19 months old at the time of listing. It sounds great and has plenty of life left to enjoy!Free DeliveryWe offer free delivery anywhere in Mainland UK.Fully insured for your peace of mind.International CustomersWe are happy to ship outside the UK on some of our listings.If shipping has not been quoted by eBay through its GSP (Global Shipping Programme) please contact us for a quote. Thanks.Returns PolicyWe want you to be happy with your purchase. If you wish to return an item, please contact us within 14 days to obtain a returns reference.The item must be in the same condition as you received it - including all packaging.Contact UsThe Audiobarn2 Feltimores ParkOld HarlowEssex CM17 0PFTel: 01279 454 860www.theaudiobarn.co.ukRegistered Company No. 9309546VAT No. GB 202 0625 71

Item Description Hana ML Low Output Moving Coil CartridgeExcellent overall condition, one careful owner from new. Supplied in original packaging and shipped via FREE fully insured courier service. Please note we cannot be 100% sure how many hours this has been used for but we can confirm the cartridge is just 19 months old at the time of listing. It sounds great and has plenty of life left to enjoy!Free DeliveryWe offer free delivery anywhere in Mainland UK.Fully insured for your peace of mind.International CustomersWe are happy to ship outside the UK on some of our listings.If shipping has not been quoted by eBay through its GSP (Global Shipping Programme) please contact us for a quote. Thanks.Returns PolicyWe want you to be happy with your purchase. If you wish to return an item, please contact us within 14 days to obtain a returns reference.The item must be in the same condition as you received it - including all packaging.Contact UsThe Audiobarn2 Feltimores ParkOld HarlowEssex CM17 0PFTel: 01279 454 860www.theaudiobarn.co.ukRegistered Company No. 9309546VAT No. GB 202 0625 71

For sale is my used Hana ML MC cartridge. This is one of the top bargains in the world of MC cartridges. I’ve recently replaced it with a £3.5k cartridge and while its better there are still some qualities I miss of the ML and can attest to how good this is for the price. Yes it’s a lot of money to spend on a cartridge but worth every penny. So why not try before you buy ? This is in good condition with 100’s of hours left on it. It is wet cleaned before every use and my records are ultrasonically cleaned which has meant this is still in great shape. I could leave it in the garage to gather dust but thought someone would want to hear and enjoy this cartridge, possibly before buying a new one yourself later for £1,050. You might even get a trade-in discount and recoup what you are paying. Comes in the original packaging with bolts, Allen key, instructions and the brush, which has never been used. I also have a spare stylus guard i.e. you get two. Please see my feedback and bid with confidence. Any questions at all please reach out and kindly have a look at my other auctions.

Hi, for sale open box - Hana ML - MC Low Output cartridge, never used. Full packing, all accessories included. The Hana ML cartridge has several advanced product features (Over E and S series HANA Moving Coil cartridges) that take the sound fidelity and musical enjoyment to new heights, continuing to offer a superb sound quality v. price at its higher price point. The ‘Micro-Line’ stylus design (shaped like the cutting head when the metal master LP is being produced), fits precisely into the vinyl groove to capture the very smallest details, offering better frequency reproduction and less distortion.The Hana M Series cartridge bodies are made from black polyoxymethylene (POM) which is a hard and extremely rigid, low resonance thermoplastic manufactured by DuPont under the trade name ‘Delrin’. There is a gold-plated copper resonance plate integral with the cartridge body that further reduces distortion from vibrations.Very high-quality copper wire has been selected for MH/ML moving coils, offering greater clarity of sound, thanks to its lower distortion of the musical signal. Parts such as the front yoke, centre and rear components of the magnetic electro-motive circuit and wires are Cryogenically processed, this is a ‘cold annealing’ process at near absolute zero temperature restructures metals at the molecular level, resulting in lower sound distortion. The result is a more precise and musical sound quality.There are captive threaded nuts for head shell fixing screws, these are built into the cartridge body offering easy mechanical fixing to the Tonearm head-shell.The ML (Micro-Line Low output) offers 0.4mv/1KHz output. Post to all Worldwide: Europe around 20-30 Euro, other 50-100 Euro.

WE ARE AN AUTHORIZED HANA DEALER!PREOWNED - $1200 LIST! - FULLY TESTED - COMPLETEHand-Made Hana MH and ML Moving-Coil Cartridges Offer Outrageously Good Performance: Precisely Fit into Vinyl Grooves, Extract Rich Detail, Provide Stellar Damping, Play with Lush LinearityHigher-specifications parts, extra-pure copper wiring, Delrin cartridge bodies, cryogenically processed materials, and threaded headshell fittings all equate to deluxe performance from Hana M Series MH and ML moving-coil cartridges. Devised to more precisely fit into vinyl grooves and provide exceptional damping, the Japanese-made models extract information with archeological-like purpose and expertise – all while proving among the most linear, extended, dynamic, and consistent cartridges anywhere near their price class. The only difference between the models: MH is high-output (2mV) while ML is low-output (0.4mV).Befitting its name, the hand-assembled M Series uses a nude microline stylus that mimics the form of a cutting stylus and fits more precisely into the vinyl groove. The design also enhances tracking to capture the most delicate details with better frequency reproduction, imaging, and resolution. In the moving-coil windings themselves, high-purity copper wire offers greater clarity. ML features a new low-impedance generator for optimized performance with a broader range of phono preamps.Injection-molded from Delrin, a high-tech polymer with improved mechanical characteristics for better resonance damping, M Series cartridge bodies reveal copious amounts of low-level information and extend the dynamic range. Metal threaded fittings for headshell-mounting hardware are also built into the body, offering easy attachment and superior mechanical interface for attention-getting bass and frequency response. The body also features an integral machined brass cap for constrained-mode layer damping. And its 9.5-gram weight provides stellar compatibility with a wider range of tonearms and turntables.Cryogenic processing, which restructures metals at the molecular level, is especially beneficial in Alnico-based magnetic electro-motive circuitry (cartridge signal generator). Cryogenically treated M Series parts include the front yoke as well as center and rear components, yielding more a precise and controlled magnetic flux field for greater linearity and overall sonics.In sum, Hana M Series has everything – and much more – offered by many more expensive cartridges. If you havent yet experienced the gorgeous sound afforded by Hana, theres never been a better time.MLStylus: Nude Microline tipCantilever: AluminumMagnet: AlnicoMagnetic circuitry: Pure Iron/Cryo treatmentCoil wire: High Purity CopperCartridge Housing: POM (Delrin)/BrassOutput level: 0.4mv/1KHzOutput balance: <1dB/1KHzVertical Tracking force: 2grTrackability: 70?/2grCompliance: 10 x 10-6 cm/dyneChannel separation: 30dB/1KHzFrequency response: 12-45,000HzImpedance: 8?/1KHzSuggested lord Impedance: > 100?Cartridge weight: 9.5grBody Color: Black

For sale is my beloved Clearaudio Concept AiR turntable with the Hana ML Cartridge. This is an insanely good combo. This model has the Satisfy Black tonearm. It is in flawless physical condition, zero scratches, zero marks as you can see in the photos. Works absolutely flawlessly. Everything was professionally set up and calibrated at Audio Element in Pasadena, CA. Power supply was replaced by iFi iPowerX plug. Comes with original box for both table and Hana ML with all original paperwork. Owned both for about 6 months. Hard financial times have made it so I need to part with this beautiful set up. I will pack it exactly as it came and I will fully insure it FEDEX ground.On Jul-27-23 at 07:32:04 PDT, seller added the following information: Lots of people have been asking…I am guessing I have put about 500 hours on both the table and cartridge.

HANA TONABNEHMER / CARTRIDGE MC ML SXLm2 * ML * Mit der M-Serie krönen die Perfektionisten bei Hana ihr Schaffen mit zwei Tonabnehmern der allerfeinsten Art. Die beiden Moving Coil Systeme beeindrucken bereits äußerlich durch ihr mattschwarzes, Resonanzen dämpfendes Gehäuse und der massiven Messingplatte, die mit den eingefrästen Gewinden eine besonders feste Verbindung zum Headshell verspricht. Zusammen mit dem am Messingträger montierten Gehäuse aus hochmolekularem Delrin® verfügt das Top-System von Hana somit über die wirkungsvollsten Grundlagen, um dem innenliegenden Generator optimale Arbeitsbedingungen zu gewähren. Vorne am verwindungsteifen Nadelträger des Hana ML / MH ist ein nackter Micro Line Diamant verbaut, dessen schmaler Grad den engen Kontakt zur Rillenflanke hält und somit für ein Höchstmaß an Feinstauflösung sorgt. Die am innen liegenden Ende des Nadelträgers montierten High Purity Kupferspulen komplettieren zusammen mit den Alnico Magneten eine Armatur, die als feinmechnisches Meisterwerk gilt. Doch damit nicht genug: Mit der Durchführung eines aufwendigen Verfahrens aus der Kryotechnik finassiert Hana seine M-Serie. Sowohl das Low Output System ML, als auch die High Output Variante MH, brillieren mit vollmundigen Klangfarben, die aus einer weiträumigen Abbildung mit bestechender Klarheit entstehen. Modelle: ML (Low Output) MH (High-Output) Typ: Moving Coil Besonderheit: Micro Line Nadelschliff Ausgangsspannung: 0,4 mV (ML) 2,0 mV (MH) Eigengewicht: 9,5 Gramm Frequenzgang: 12 - 45.000 Hz Nadelnachgiebigkeit: 10 µm/mN Eigenimpedanz: 8 ? (ML) 130 ? (MH) Abschlussimpedanz: > 100 ? (ML) 47.000 ? (MH) Empf. Auflagekraft: 2,0 Gramm Als autorisierter Fachhändler von HANA freuen wir uns jederzeit über Ihre Anfage ! Harry Langer

Hana ML Low Output Moving Coil Cartridge. Beautiful Hana cart. Used max 100hrs, in excellent condition! Please feel free to ask any questions.

About Us Contact Us Terms delivery returns Home Menu Home HiFi All in One Music Systems Amplifiers Blu-Ray and DVD Players Cartridges Stylus Replacements CD Players DACs Digital Products Equipment Supports Headphone Amplifiers Headphones Hi-Fi Supports iPod & MP3 Docks Media Players Music Streamers Other Phono Stages Portable Music Players Speaker Stands and Supports Speakers Tonearms Tuners Turntables and Essentials Home Cinema Cables Eccose Cable Shop Nordost & Wyrewizard Cables QED Cable Shop Wireworld Cable Shop Burn-In Products Cable Burn-In Service Cardas Custom Adaptors & Cable Chord Company Cables Digital Interconnects Ethernet Cables HDMI Cables Interconnects Mains Cables Mains Products Speaker Cables Sub-Woofer Interconnects Tonearm Cables and Connectors USB Cables Cables and Connectors Music CDs Music CDs & SACDs Vinyl Records Accessories BluRay Calibration Cartridge Mounting Kits Cartridge Tags CD, DVD Cleaning & Care Furutech Shop Headshell Leads Headshells Hi-Fi Fuses Isolation Products Mains Blocks Mains Connectors Maintenance / Cleaning Michell Engineering Shop Naim Shop Power Supplys Pro-Ject Turntable Spare Parts Record Cleaning and Care Record Cleaning Machines Record Sleeves Roksan Accessories Stylus Cleaners Tape Cleaners Terminations & Solder Tonearm Essentials Turntable Belts Turntable Covers Turntable Setup Tools Turntable Upgrades and Kits Valve and Tube Essentials Vinyl LP Display & Storage VPI Shop HiFi All in One Music Systems Amplifiers Blu-Ray and DVD Players Cartridges Stylus Replacements CD Players DACs Digital Products Equipment Supports Headphone Amplifiers Headphones Hi-Fi Supports iPod & MP3 Docks Media Players Music Streamers Other Phono Stages Portable Music Players Speaker Stands and Supports Speakers Tonearms Tuners Turntables and Essentials Home Cinema Cables Eccose Cable Shop Nordost & Wyrewizard Cables QED Cable Shop Wireworld Cable Shop Burn-In Products Cable Burn-In Service Cardas Custom Adaptors & Cable Chord Company Cables Digital Interconnects Ethernet Cables HDMI Cables Interconnects Mains Cables Mains Products Speaker Cables Sub-Woofer Interconnects Tonearm Cables and Connectors USB Cables Cables and Connectors Music CDs Music CDs & SACDs Vinyl Records Accessories BluRay Calibration Cartridge Mounting Kits Cartridge Tags CD, DVD Cleaning & Care Furutech Shop Headshell Leads Headshells Hi-Fi Fuses Isolation Products Mains Blocks Mains Connectors Maintenance / Cleaning Michell Engineering Shop Naim Shop Power Supplys Pro-Ject Turntable Spare Parts Record Cleaning and Care Record Cleaning Machines Record Sleeves Roksan Accessories Stylus Cleaners Tape Cleaners Terminations & Solder Tonearm Essentials Turntable Belts Turntable Covers Turntable Setup Tools Turntable Upgrades and Kits Valve and Tube Essentials Vinyl LP Display & Storage VPI Shop Customer services About us Delivery & returns Privacy Policy Terms & Conditions Latest Products Hana ML Low Output Moving Coil Cartridge Hana ML Low Output Moving Coil Cartridge £1039.00 Add to wishlist Watch this item Ask seller a question Description Customer Reviews Delivery Payment Returns Description Hana ML Low Output Moving Coil Cartridge M stands for Micro-line, the design of the nude diamond stylus tip used on this range of two cartridges, the ML (low output) and MH (high output). In line with the Hana philosophy of offering highly musical cartridges at competitive prices, the ML and MH options are set to offer a great sound and great value for money. Manufacturers Specifications: Hana ML / MH Phono Cartridges Stylus: Nude Microline Cantilever: Aluminium Magnet: Alnico Coil Wire: Very High Purity Copper Cartridge Housing/Base: POM/Brass Output Level: 0.2mV (ML) Output Level: 2.0mV (MH) Channel Balance:

Mit der M-Serie erschaffen die Perfektionisten von Hana zwei Tonabnehmer der besonderen Art.Die beiden Moving Coil Systeme beeindrucken bereits äußerlich durch ihr mattschwarzes, Resonanzen dämpfendes Gehäuse und einer massiven Messingplatte, die mit eingefrästen Gewinden eine besonders feste Verbindung zum Headshell verspricht. Zusammen mit dem am Messingträger montierten Gehäuse aus hochmolekularem Delrin® verfügt das Top-System von Hana somit über die wirkungsvollsten Grundlagen, um dem innenliegenden Generator optimale Arbeitsbedingungen zu gewähren. Vorne am verwindungsteifen Nadelträger des Hana ML / MH ist ein nackter Microline Diamant verbaut, dessen schmaler Grad den engen Kontakt zur Rillenflanke hält und somit für ein Höchstmaß an Feinstauflösung sorgt. Die am innen liegenden Ende des Nadelträgers montierten High Purity Kupferspulen komplettieren zusammen mit den Alnico Magneten eine Armatur, die als feinmechnisches Meisterwerk gilt. Doch damit nicht genug: Mit der Durchführung eines aufwendigen Verfahrens aus der Kryotechnik finassiert Hana seine M-Serie. Sowohl das Low Output System ML, als auch die High Output Variante MH, brillieren mit vollmundigen Klangfarben, die aus einer weiträumigen Abbildung mit natürlicher Klarheit entstehen. ModellHana MLTypMoving Coil / Low OutputBesonderheitMicro Line NadelschliffAusgangsspannung0,4 mV (ML)Eigengewicht9,5 GrammFrequenzgang12 - 45.000 HzNadelnachgiebigkeit10 µm/mNEigenimpedanz8 OhmAbschlussimpedanz> 100 OhmEmpf. Auflagekraft2,0 Gramm

Mit der M-Serie erschaffen die Perfektionisten von Hana zwei Tonabnehmer der besonderen Art.Die beiden Moving Coil Systeme beeindrucken bereits äußerlich durch ihr mattschwarzes, Resonanzen dämpfendes Gehäuse und einer massiven Messingplatte, die mit eingefrästen Gewinden eine besonders feste Verbindung zum Headshell verspricht. Zusammen mit dem am Messingträger montierten Gehäuse aus hochmolekularem Delrin® verfügt das Top-System von Hana somit über die wirkungsvollsten Grundlagen, um dem innenliegenden Generator optimale Arbeitsbedingungen zu gewähren. Vorne am verwindungsteifen Nadelträger des Hana ML / MH ist ein nackter Microline Diamant verbaut, dessen schmaler Grad den engen Kontakt zur Rillenflanke hält und somit für ein Höchstmaß an Feinstauflösung sorgt. Die am innen liegenden Ende des Nadelträgers montierten High Purity Kupferspulen komplettieren zusammen mit den Alnico Magneten eine Armatur, die als feinmechnisches Meisterwerk gilt. Doch damit nicht genug: Mit der Durchführung eines aufwendigen Verfahrens aus der Kryotechnik finassiert Hana seine M-Serie. Sowohl das Low Output System ML, als auch die High Output Variante MH, brillieren mit vollmundigen Klangfarben, die aus einer weiträumigen Abbildung mit natürlicher Klarheit entstehen. ModellHana MLTypMoving Coil / Low OutputBesonderheitMicro Line NadelschliffAusgangsspannung0,4 mV (ML)Eigengewicht9,5 GrammFrequenzgang12 - 45.000 HzNadelnachgiebigkeit10 µm/mNEigenimpedanz8 OhmAbschlussimpedanz> 100 OhmEmpf. Auflagekraft2,0 Gramm

Mit der M-Serie erschaffen die Perfektionisten von Hana zwei Tonabnehmer der besonderen Art.Die beiden Moving Coil Systeme beeindrucken bereits äußerlich durch ihr mattschwarzes, Resonanzen dämpfendes Gehäuse und einer massiven Messingplatte, die mit eingefrästen Gewinden eine besonders feste Verbindung zum Headshell verspricht. Zusammen mit dem am Messingträger montierten Gehäuse aus hochmolekularem Delrin® verfügt das Top-System von Hana somit über die wirkungsvollsten Grundlagen, um dem innenliegenden Generator optimale Arbeitsbedingungen zu gewähren. Vorne am verwindungsteifen Nadelträger des Hana ML / MH ist ein nackter Microline Diamant verbaut, dessen schmaler Grad den engen Kontakt zur Rillenflanke hält und somit für ein Höchstmaß an Feinstauflösung sorgt. Die am innen liegenden Ende des Nadelträgers montierten High Purity Kupferspulen komplettieren zusammen mit den Alnico Magneten eine Armatur, die als feinmechnisches Meisterwerk gilt. Doch damit nicht genug: Mit der Durchführung eines aufwendigen Verfahrens aus der Kryotechnik finassiert Hana seine M-Serie. Sowohl das Low Output System ML, als auch die High Output Variante MH, brillieren mit vollmundigen Klangfarben, die aus einer weiträumigen Abbildung mit natürlicher Klarheit entstehen. ModellHana MLTypMoving Coil / Low OutputBesonderheitMicro Line NadelschliffAusgangsspannung0,4 mV (ML)Eigengewicht9,5 GrammFrequenzgang12 - 45.000 HzNadelnachgiebigkeit10 µm/mNEigenimpedanz8 OhmAbschlussimpedanz> 100 OhmEmpf. Auflagekraft2,0 Gramm