Effective Length: 237 mm Overhang: 15 mm Offset Angle: Pivot to Spindle: 222 mm Cartridge Range: 5-17 g Effective Mass: VTA Adjust: Yes Arm Mount: Headshell: Removable Null Points: Mounted crudely on a Thorens TD 125 arm board. Tonearm has not been tested, but I have tested the cartridge on my personal table and it sounds great. Looks very lightly used. Tonearm itself is in good shape. Looks like it is complete. Tonearm operation has not been verified and is for parts only.

Wegen Upgrade auf einen Sorane Tonarm verkaufe den Transrotor 800S (jelco) Arm, was ich letzte Jahre auf meinem Transrotor Zet 1 benutzt habe. Seltene Gelegenheit, da Jelco die Produktion eingestellt hat. Unkomplizierter und klanglich sehr guter Tonarm, ohne Tohnabnehmer.

I removed this tonearm from a Thorens turntable that I am parting out. I tested it today and it sounds wonderful. Parts include a Jelco SA-750DB in excellent used condition, includes tonearm, headshell, mounting base with screws and nuts, regular counter weight, heavy counter weight, Allen wrenches, plastic mounting template, paper mounting template, and instruction sheet. The only things missing from the original package are the dampening oil and a guide pin to use with the mounting template. Also included is a Jelco JAC-501 cable with replaced RCA plugs. The original plugs were crimp on and had two connections break, they have been replaced with much sturdier soldered plugs. Finally a Jelco SA-250ST mounting plate is included. The plate includes mounting spacers and screws and nuts. This plate is for use with a number of Thorens turntables including the TD-145, 146, 147, 160, 165, and 166. I had this installed in a Thorens TD-166 mkii and it worked perfectly. Please see photos for items included, and exact condition. These items are sold as is, no returns. Please verify that this will fit on your return table before purchasing. Payment due within three days of auction close. International sales and shipping only through the eBay international shipping program.

Anti skate weight for the Jelco SA-50 tonearm. This anti skate weight is made as a close replica of the original. It is made to the correct mass value required but it my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the anti skate weight and its monofilament line only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and I will supply extra lines if you feel you might need them for free on request. *

Tonearm - badged as Mission, but made by Jelco (SA-250ST) Jelco made tonearms that were branded for other makers/brands and fitted to many different decks, i.e. Linn Majik - made in Japan. Static balance straight tonearm. In working condition when removed from deck. The tonearm will fit many decks, i.e. Thorens, Linn Sondek, Ariston, Rega and many others. In super condition, with just 2 marks where cartridge was fitted to the arm end. No cartridge. Original Jelco Litz cartridge wires attached. Comes with original phono leads. From a smoke and pet free home. Postage cost covers being well packaged and protected and Royal Mail Special Delivery Next Day and insured.

We have this preowned Avid Ingenium turntable with Jelco mount and Jelco SA-750D tonearm. Both the turntable and tonearm are in excellent condition with hardly any cosmetic marks or scratches. Both items come with their original packaging. Unit Serial Number: 70345 (turntable) £20 Mainland UK Delivery Any queries please do not hesitate to contact us. TI-1-55629/55966-98009/93009 Auction items can be viewed and demoed if practical at our demo rooms in Hull, please make an appointment in advance. Fanthorpes Hifi is based in a stunning Edwardian Arcade in Hull East Yorkshire. There are no pressure sales, we only sell the brands we believe in and always put the customer first. We are specialists in CHORD, PMC, Bryston, Devialet, Arcam, Musical Fidelity, Martin Logan amongst others please check our website for more details. HS

hi therehere we have up for sale is a jelco sa-250st prewired tonearm with armlift made in japan in used but in good condition please view the picturestested and in full working orderideal upgrade for the goldring lenco gl-75 turntable will be sent via a royal mail tracked 48hr thank you for looking and please view my other listings for more items

THIS IS AS NEW AND COMES WITH ORIGINAL HEADSHELL AND COUNTERWEIGHTS

Anti skate weight for the Jelco SA-50 tonearm. This anti skate weight is made as a close replica of the original. It is made to the correct mass value required but it my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the anti skate weight and its monofilament line only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and I will supply extra lines if you feel you might need them for free on request. *

Jelco SA-550L Tonearm Cartridge Mounting Screws (Ultra Light Weight Nylon) The Picture shows Exactly what you are Buying & will Receive.The Headshell - Cartridge Mounting Kits Include the Parts Listed Below.2 x M2.5x4 mm Nylon 66 Screws.2 x M2.5x6 mm Nylon 66 Screws.2 x M2.5x8 mm Nylon 66 Screws.2 x M2.5x10 mm Nylon 66 Screws.2 x M2.5x12 mm Nylon 66 Screws.2 x M2.5x15 mm Nylon 66 Screws.2 x M2.5x18 mm Nylon 66 Screws.2 x M2.5x20 mm Nylon 66 Screws.16 x M2.5 Nylon 66 Fixing Nuts.16 x Nylon Washers.They can be Use with the Following Makes Of Tonearm: SME (all Models) Linn (all Models) Thorens (all Models) Grace (all Models) Rega (all Models) Acos Lustre (all Models) Roksan (all Models) ARB (all Models) Origin Live (all Models) Inspire Hi Fi (all Models) Mission (all Models) Hadcock (all Models) Koetsu (all Models) ADC (all Models) Jelco (all Models) Naim (all Models) Goldring (all Models) Acoustic Research (all Models) Townsend (all Models) Michell (all Models) Dual (all Models) Pro-Ject (all Models) They Can Also Be Used With The Following Makes Of Turntable: Thorens (all Models) Technics (all Models) Audio Technica (all Models) Rotel (all Models) Pioneer (all Models) Sony (all Models) Toshiba (all Models) Yamaha (all Models) Sansui (all Models) Luxman (all Models) Goldring (All Modes) Dual (All Models) Denon (All Models) Hitachi (All Models) Trio (All Models) Kenwood (All Models) Acoustic Research (All Models) A&R (All Models) + Many Other Makes.These are by far the Best Choice for use with MC Moving Coil Cartridges.They can be used with almost all MM Moving Magnet Cartridges as well.Below Is A Question & Answer Section, This Will Hopefully Answer Most Customer Questions. Q: How Long Will I Have To Wait For My Order To Arrive ? A: We send Most Items On A 48hr Service. Purchases Made On A Thursday Through Sunday Are Sent On The Following Monday (Except On Bank Holiday Mondays)Q: Do You Provide Tracking Details ? A: Yes, We Always Upload Full Tracking details To Your PayPal Account Once Your Item Has Been Packed To Ship.Q: My Tracking Details Do Not Work, Why ? A: Once Your Order Has Been Collected Your Tracking Details Will Work. Normally After 7pm Onwards On The Day Of Collection From Us.Q: Can You Send My Order To A Non Registered eBay - PayPal Address ? A: No, This Is Not Possible. PLEASE DO NOT ASK!Q: Will You Send By A Cheap Non Signed For Courier ? A: No, All Items Are Always Send Fully Signed For & Fully Trackable.Q: Will You Send Overseas ?A: We Ship To Many Countries Via eBay Global Shipping.Q: What Are The Costs To Ship To Me Overseas ?A: eBay Show These Costs At The Point Of Checkout, You Can See Them Before Making A Purchase.Overseas Shipping Is Available via eBay Global Shipping, If Your Country Is Not Included In Our Global Shipping Shipping Selections It Will Not Be Possible To Ship To Your Country.

Anti skate weight for the Jelco SA-50 tonearm. This anti skate weight is made as a close replica of the original. It is made to the correct mass value required but it my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the anti skate weight and its monofilament line only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and I will supply extra lines if you feel you might need them for free on request. *

Anti skate weight for the Jelco SA-50 tonearm. This anti skate weight is made as a close replica of the original. It is made to the correct mass value required but it my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the anti skate weight and its monofilament line only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and I will supply extra lines if you feel you might need them for free on request. *

Anti skate weight for the Jelco SA-50 tonearm. This anti skate weight is made as a close replica of the original. It is made to the correct mass value required but it my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the anti skate weight and its monofilament line only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and I will supply extra lines if you feel you might need them for free on request. *

This auction is for an upgraded legendary Jelco SA-750D Tonearm in black. The tonearm is branded as ISOkinetik Silver Melody and is actually a black Jelco SA-750D that has been upgraded with silver internal wiring. The tonearm has been fitted with a magnesium and rosewood headshell with silver cartridge leads and gold-plated connectors. It really is an amazing high-quality arm that will help you get the very best sound from your cartridge. I will be including the original headshell, which is useful when swapping cartridges, a spare arm clip, Allan key, cartridge spacer and screws (see photos). The arm is also supplied with a TVA Corvette Silver tonearm cable, terminated in RCA phono plugs. I am sending this with free UK postage. Thank you for your interest!

A variant of a Jelco SA-250ST Tonearm with a detachable headshell. I believe these where fitted to AR turntables from America. Bearings are good as is the arm lift lower and anti-skate. It uses a smaller locking collar that usual. Linn pattern but with a smaller diameter and a rubber gasket under the collar.

Anti skate weight for the Jelco SA-50 tonearm. This anti skate weight is made as a close replica of the original. It is made to the correct mass value required but it my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the anti skate weight and its monofilament line only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and I will supply extra lines if you feel you might need them for free on request. *

Jelco SA-750E S-Shaped 10” Tonearm extra weight /box. Great working tonearm, no cable and no cartridge. This was from the Jim Fosgate collection.

JELCO SA-750LB 12, neu, nie montiert, ohne Tonabnehmer, Serien-Nr: S120409 n.b.: Mein Neupreis ist geschtzt. Die abgebildete VPI Tonarmbasis wird nicht mitgeliefert. Sie diente nur zur Erstellung der Bilder. Beschreibung Kardanisch gelagerter Stereo-Tonarm Der Jelco SA-750L ist die 12-Zoll-Version des beliebten SA-750-Tonarms Der Arm verfgt ber eine einstellbare Armhhe, Flssigkeitsdmpfung und eine abnehmbare Headshell Spezifikationen Effektive Lnge: 305 mm berhang: 15 mm Versatzwinkel: 19 Grad Montageabstand: 290 mm Montagemuster: Linn Vertikale Reibung: 20 mg Seitliche Reibung: 20 mg Patronengewichtsbereich: 4 bis 12 g (1222 g mit schwerem Gegengewicht) Armhhenverstellung: 38 bis 60 mm

Anti skate weight for the Jelco SA-50 tonearm. This anti skate weight is made as a close replica of the original. It is made to the correct mass value required but it my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the anti skate weight and its monofilament line only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and I will supply extra lines if you feel you might need them for free on request. *