Used unit works perfect. The top has had an amp sitting on it in the cabinet that is why there are marks on it. The Lector CDP 0.6T player features a 24-bit resolution dac (selected by Lector) and phase circuit output control for invert or no-invert the absolute phase at output! Around the ECC81/12AT7 tube output we have design a simple 6db/oct. passive filter.

Used unit works perfect. The top has had an amp sitting on it in the cabinet that is why there are marks on it. The Lector CDP 0.6T player features a 24-bit resolution dac (selected by Lector) and phase circuit output control for invert or no-invert the absolute phase at output! Around the ECC81/12AT7 tube output we have design a simple 6db/oct. passive filter.

Used unit works perfect. The top has had an amp sitting on it in the cabinet that is why there are marks on it. The Lector CDP 0.6T player features a 24-bit resolution dac (selected by Lector) and phase circuit output control for invert or no-invert the absolute phase at output! Around the ECC81/12AT7 tube output we have design a simple 6db/oct. passive filter.

Used unit works perfect. The top has had an amp sitting on it in the cabinet that is why there are marks on it. The Lector CDP 0.6T player features a 24-bit resolution dac (selected by Lector) and phase circuit output control for invert or no-invert the absolute phase at output! Around the ECC81/12AT7 tube output we have design a simple 6db/oct. passive filter.

Used unit works perfect. The top has had an amp sitting on it in the cabinet that is why there are marks on it. The Lector CDP 0.6T player features a 24-bit resolution dac (selected by Lector) and phase circuit output control for invert or no-invert the absolute phase at output! Around the ECC81/12AT7 tube output we have design a simple 6db/oct. passive filter.

LECTOR CDP 603 Real Tube Cd Player Excellent aesthetic and technical condition Original box, manual and remote Tecnology meet desing based on new case for better rigidity and mechanical vibration control :?? New laser cd mechanism as great readibility > 3 mm error?? Stable special rubber suspension for reduce internally/external vibration?? New servo circuits based on 32 bit powerfull microprocessor?? New functions as: numeric pads for direct track calling, display off/on by remote control handset, variablebrightness of display?? The DAC board is design around 32 bit 192 Khz hi-resolution very low jitter control?? Pure class A real tubes output without any solid state device on signal path?? Only one capacitor on signal path as custom made polypropylene?? Several power supply circuits for all electronic section with great capacitors reserve?? Large display for long distance simple readibility?? Selected very low noise tubes as 12AT7/ECC-81 ( 2 )?? Chassis design for reduce mechanical inner-outer vibration Product description Real tubes output top loading cd playerActive devices DAC @ 192 Khz 32 bitFrequency response linearity 20-20Khz +/- 1 db correct phase + outputDistorsion / residual jitter < 0.1 % THD / < 20 psPower supply 230 Vac / 120 Vac / 100 vac 50/60 hz 70 V/ADimension/weight 430 mm (L) 300 mm (D) 100 (H) 12 KgCertification CE-EMC / LVD Sent in 2-4 days after payment International buyers welcome! We speak 4 languages WE SHIP WORLDWIDE

SP E C I F I C A T I O N :E L E C T R I C A L P E R F O R M A N C EUnit description:Stereo tube line level preamplifier with 5 inputs,2 main outputs, passive volume out, tape out, htd outputTube active circuit:6H30II, by SATCcircuit: 6922/12AT7/12AU7/6CG7/12BH7Frequency response:20-50.000 Hz +/- 1 dbTHD distorsion:Less of 0.1 %Input sensibility and gain:200 mV / 20 db gain / 50 kohm inputOutput voltage and impedance:20 Volt @ 250 ohmOptional:Remote control handset,cherry wood veenerede side panelsPower supply main:100V/120V/230V ac 70 V/ADimension, weight (net):400 (L) x 110 (H) x 300 (D) Kg.10E L E C T R I C A L P E R F O R M A N C EUnit description:Stereo tube line level preamplifier with 5 inputs,2 main outputs, passive volume out, tape out, htd outputTube active circuit:6H30II, by SATCcircuit: 6922/12AT7/12AU7/6CG7/12BH7Frequency response:20-50.000 Hz +/- 1 dbTHD distorsion:Less of 0.1 %Input sensibility and gain:200 mV / 20 db gain / 50 kohm inputOutput voltage and impedance:20 Volt @ 250 ohmOptional:Remote control handset,cherry wood veenerede side panelsPower supply main:100V/120V/230V ac 70 V/ADimension, weight (net):400 (L) x 110 (H) x 300 (D) Kg.10Lector CDP-0.6 cd-player with tube analog output featuring original cdm servo with proprietary software control,proprietary DAC chipset and D.S.P. resampling solution. Audio analog output is based on pure direct dac connection as two double triode on class A configuration circuit (ECC-81, 12AT7) Also comes with Black Max Series Violet Z1 cord and MAC Palladium Sound Pipes cables. Selling this as it was left after a divorce and I have no use for any of this.Type off unit:Integrated CD Player with tube out filter and dsp sample rate converter for 96 khzHarmonic distorsion THD: Better than 0.1 %DAC type and filter:24 bit with DSP sample rate converter by Lector proprietary softwareSignal to noise ratio:100 db (A)Tube for preamplification stage:2 x ECC-81 – 12 AT 7 selected by Lector during testingFrequency response:20 - 22 K h z +/- 1.5 dbDigital outputs:Optional: SPDIF/OPTO Toslink or ST-II/AES-EBU balanced by XLRAnalog line outputs:1 one pair RCA at 2.3 mV 250 ohmExternal power supply:100/110/230/240 Vac 50/60 Hz 70 V/aExternal dimension:400 x 308 x 85 ( L x P x H) mm

SP E C I F I C A T I O N :E L E C T R I C A L P E R F O R M A N C EUnit description:Stereo tube line level preamplifier with 5 inputs,2 main outputs, passive volume out, tape out, htd outputTube active circuit:6H30II, by SATCcircuit: 6922/12AT7/12AU7/6CG7/12BH7Frequency response:20-50.000 Hz +/- 1 dbTHD distorsion:Less of 0.1 %Input sensibility and gain:200 mV / 20 db gain / 50 kohm inputOutput voltage and impedance:20 Volt @ 250 ohmOptional:Remote control handset,cherry wood veenerede side panelsPower supply main:100V/120V/230V ac 70 V/ADimension, weight (net):400 (L) x 110 (H) x 300 (D) Kg.10E L E C T R I C A L P E R F O R M A N C EUnit description:Stereo tube line level preamplifier with 5 inputs,2 main outputs, passive volume out, tape out, htd outputTube active circuit:6H30II, by SATCcircuit: 6922/12AT7/12AU7/6CG7/12BH7Frequency response:20-50.000 Hz +/- 1 dbTHD distorsion:Less of 0.1 %Input sensibility and gain:200 mV / 20 db gain / 50 kohm inputOutput voltage and impedance:20 Volt @ 250 ohmOptional:Remote control handset,cherry wood veenerede side panelsPower supply main:100V/120V/230V ac 70 V/ADimension, weight (net):400 (L) x 110 (H) x 300 (D) Kg.10Lector CDP-0.6 cd-player with tube analog output featuring original cdm servo with proprietary software control,proprietary DAC chipset and D.S.P. resampling solution. Audio analog output is based on pure direct dac connection as two double triode on class A configuration circuit (ECC-81, 12AT7) Also comes with Black Max Series Violet Z1 cord and MAC Palladium Sound Pipes cables. Selling this as it was left after a divorce and I have no use for any of this.Type off unit:Integrated CD Player with tube out filter and dsp sample rate converter for 96 khzHarmonic distorsion THD: Better than 0.1 %DAC type and filter:24 bit with DSP sample rate converter by Lector proprietary softwareSignal to noise ratio:100 db (A)Tube for preamplification stage:2 x ECC-81 – 12 AT 7 selected by Lector during testingFrequency response:20 - 22 K h z +/- 1.5 dbDigital outputs:Optional: SPDIF/OPTO Toslink or ST-II/AES-EBU balanced by XLRAnalog line outputs:1 one pair RCA at 2.3 mV 250 ohmExternal power supply:100/110/230/240 Vac 50/60 Hz 70 V/aExternal dimension:400 x 308 x 85 ( L x P x H) mm

SP E C I F I C A T I O N :E L E C T R I C A L P E R F O R M A N C EUnit description:Stereo tube line level preamplifier with 5 inputs,2 main outputs, passive volume out, tape out, htd outputTube active circuit:6H30II, by SATCcircuit: 6922/12AT7/12AU7/6CG7/12BH7Frequency response:20-50.000 Hz +/- 1 dbTHD distorsion:Less of 0.1 %Input sensibility and gain:200 mV / 20 db gain / 50 kohm inputOutput voltage and impedance:20 Volt @ 250 ohmOptional:Remote control handset,cherry wood veenerede side panelsPower supply main:100V/120V/230V ac 70 V/ADimension, weight (net):400 (L) x 110 (H) x 300 (D) Kg.10E L E C T R I C A L P E R F O R M A N C EUnit description:Stereo tube line level preamplifier with 5 inputs,2 main outputs, passive volume out, tape out, htd outputTube active circuit:6H30II, by SATCcircuit: 6922/12AT7/12AU7/6CG7/12BH7Frequency response:20-50.000 Hz +/- 1 dbTHD distorsion:Less of 0.1 %Input sensibility and gain:200 mV / 20 db gain / 50 kohm inputOutput voltage and impedance:20 Volt @ 250 ohmOptional:Remote control handset,cherry wood veenerede side panelsPower supply main:100V/120V/230V ac 70 V/ADimension, weight (net):400 (L) x 110 (H) x 300 (D) Kg.10Lector CDP-0.6 cd-player with tube analog output featuring original cdm servo with proprietary software control,proprietary DAC chipset and D.S.P. resampling solution. Audio analog output is based on pure direct dac connection as two double triode on class A configuration circuit (ECC-81, 12AT7) Also comes with Black Max Series Violet Z1 cord and MAC Palladium Sound Pipes cables. Selling this as it was left after a divorce and I have no use for any of this.Type off unit:Integrated CD Player with tube out filter and dsp sample rate converter for 96 khzHarmonic distorsion THD: Better than 0.1 %DAC type and filter:24 bit with DSP sample rate converter by Lector proprietary softwareSignal to noise ratio:100 db (A)Tube for preamplification stage:2 x ECC-81 – 12 AT 7 selected by Lector during testingFrequency response:20 - 22 K h z +/- 1.5 dbDigital outputs:Optional: SPDIF/OPTO Toslink or ST-II/AES-EBU balanced by XLRAnalog line outputs:1 one pair RCA at 2.3 mV 250 ohmExternal power supply:100/110/230/240 Vac 50/60 Hz 70 V/aExternal dimension:400 x 308 x 85 ( L x P x H) mm

SP E C I F I C A T I O N :E L E C T R I C A L P E R F O R M A N C EUnit description:Stereo tube line level preamplifier with 5 inputs,2 main outputs, passive volume out, tape out, htd outputTube active circuit:6H30II, by SATCcircuit: 6922/12AT7/12AU7/6CG7/12BH7Frequency response:20-50.000 Hz +/- 1 dbTHD distorsion:Less of 0.1 %Input sensibility and gain:200 mV / 20 db gain / 50 kohm inputOutput voltage and impedance:20 Volt @ 250 ohmOptional:Remote control handset,cherry wood veenerede side panelsPower supply main:100V/120V/230V ac 70 V/ADimension, weight (net):400 (L) x 110 (H) x 300 (D) Kg.10E L E C T R I C A L P E R F O R M A N C EUnit description:Stereo tube line level preamplifier with 5 inputs,2 main outputs, passive volume out, tape out, htd outputTube active circuit:6H30II, by SATCcircuit: 6922/12AT7/12AU7/6CG7/12BH7Frequency response:20-50.000 Hz +/- 1 dbTHD distorsion:Less of 0.1 %Input sensibility and gain:200 mV / 20 db gain / 50 kohm inputOutput voltage and impedance:20 Volt @ 250 ohmOptional:Remote control handset,cherry wood veenerede side panelsPower supply main:100V/120V/230V ac 70 V/ADimension, weight (net):400 (L) x 110 (H) x 300 (D) Kg.10Lector CDP-0.6 cd-player with tube analog output featuring original cdm servo with proprietary software control,proprietary DAC chipset and D.S.P. resampling solution. Audio analog output is based on pure direct dac connection as two double triode on class A configuration circuit (ECC-81, 12AT7) Also comes with Black Max Series Violet Z1 cord and MAC Palladium Sound Pipes cables. Selling this as it was left after a divorce and I have no use for any of this.Type off unit:Integrated CD Player with tube out filter and dsp sample rate converter for 96 khzHarmonic distorsion THD: Better than 0.1 %DAC type and filter:24 bit with DSP sample rate converter by Lector proprietary softwareSignal to noise ratio:100 db (A)Tube for preamplification stage:2 x ECC-81 – 12 AT 7 selected by Lector during testingFrequency response:20 - 22 K h z +/- 1.5 dbDigital outputs:Optional: SPDIF/OPTO Toslink or ST-II/AES-EBU balanced by XLRAnalog line outputs:1 one pair RCA at 2.3 mV 250 ohmExternal power supply:100/110/230/240 Vac 50/60 Hz 70 V/aExternal dimension:400 x 308 x 85 ( L x P x H) mm

LECTOR 603 VALVE CD PLAYER. Outstanding condition with its original box. Tiniest scratch on cd drawer that you have to look for. Shown in last photo Superb cd player with inbuilt valve dac Original remote control Light use only Selling as I am not using the player as I listen to digitally stored music on a server.

SP E C I F I C A T I O N :E L E C T R I C A L P E R F O R M A N C EUnit description:Stereo tube line level preamplifier with 5 inputs,2 main outputs, passive volume out, tape out, htd outputTube active circuit:6H30II, by SATCcircuit: 6922/12AT7/12AU7/6CG7/12BH7Frequency response:20-50.000 Hz +/- 1 dbTHD distorsion:Less of 0.1 %Input sensibility and gain:200 mV / 20 db gain / 50 kohm inputOutput voltage and impedance:20 Volt @ 250 ohmOptional:Remote control handset,cherry wood veenerede side panelsPower supply main:100V/120V/230V ac 70 V/ADimension, weight (net):400 (L) x 110 (H) x 300 (D) Kg.10E L E C T R I C A L P E R F O R M A N C EUnit description:Stereo tube line level preamplifier with 5 inputs,2 main outputs, passive volume out, tape out, htd outputTube active circuit:6H30II, by SATCcircuit: 6922/12AT7/12AU7/6CG7/12BH7Frequency response:20-50.000 Hz +/- 1 dbTHD distorsion:Less of 0.1 %Input sensibility and gain:200 mV / 20 db gain / 50 kohm inputOutput voltage and impedance:20 Volt @ 250 ohmOptional:Remote control handset,cherry wood veenerede side panelsPower supply main:100V/120V/230V ac 70 V/ADimension, weight (net):400 (L) x 110 (H) x 300 (D) Kg.10Lector CDP-0.6 cd-player with tube analog output featuring original cdm servo with proprietary software control,proprietary DAC chipset and D.S.P. resampling solution. Audio analog output is based on pure direct dac connection as two double triode on class A configuration circuit (ECC-81, 12AT7) Also comes with Black Max Series Violet Z1 cord and MAC Palladium Sound Pipes cables. Selling this as it was left after a divorce and I have no use for any of this.Type off unit:Integrated CD Player with tube out filter and dsp sample rate converter for 96 khzHarmonic distorsion THD: Better than 0.1 %DAC type and filter:24 bit with DSP sample rate converter by Lector proprietary softwareSignal to noise ratio:100 db (A)Tube for preamplification stage:2 x ECC-81 – 12 AT 7 selected by Lector during testingFrequency response:20 - 22 K h z +/- 1.5 dbDigital outputs:Optional: SPDIF/OPTO Toslink or ST-II/AES-EBU balanced by XLRAnalog line outputs:1 one pair RCA at 2.3 mV 250 ohmExternal power supply:100/110/230/240 Vac 50/60 Hz 70 V/aExternal dimension:400 x 308 x 85 ( L x P x H) mm

SP E C I F I C A T I O N :E L E C T R I C A L P E R F O R M A N C EUnit description:Stereo tube line level preamplifier with 5 inputs,2 main outputs, passive volume out, tape out, htd outputTube active circuit:6H30II, by SATCcircuit: 6922/12AT7/12AU7/6CG7/12BH7Frequency response:20-50.000 Hz +/- 1 dbTHD distorsion:Less of 0.1 %Input sensibility and gain:200 mV / 20 db gain / 50 kohm inputOutput voltage and impedance:20 Volt @ 250 ohmOptional:Remote control handset,cherry wood veenerede side panelsPower supply main:100V/120V/230V ac 70 V/ADimension, weight (net):400 (L) x 110 (H) x 300 (D) Kg.10E L E C T R I C A L P E R F O R M A N C EUnit description:Stereo tube line level preamplifier with 5 inputs,2 main outputs, passive volume out, tape out, htd outputTube active circuit:6H30II, by SATCcircuit: 6922/12AT7/12AU7/6CG7/12BH7Frequency response:20-50.000 Hz +/- 1 dbTHD distorsion:Less of 0.1 %Input sensibility and gain:200 mV / 20 db gain / 50 kohm inputOutput voltage and impedance:20 Volt @ 250 ohmOptional:Remote control handset,cherry wood veenerede side panelsPower supply main:100V/120V/230V ac 70 V/ADimension, weight (net):400 (L) x 110 (H) x 300 (D) Kg.10Lector CDP-0.6 cd-player with tube analog output featuring original cdm servo with proprietary software control,proprietary DAC chipset and D.S.P. resampling solution. Audio analog output is based on pure direct dac connection as two double triode on class A configuration circuit (ECC-81, 12AT7) Also comes with Black Max Series Violet Z1 cord and MAC Palladium Sound Pipes cables. Selling this as it was left after a divorce and I have no use for any of this.Type off unit:Integrated CD Player with tube out filter and dsp sample rate converter for 96 khzHarmonic distorsion THD: Better than 0.1 %DAC type and filter:24 bit with DSP sample rate converter by Lector proprietary softwareSignal to noise ratio:100 db (A)Tube for preamplification stage:2 x ECC-81 – 12 AT 7 selected by Lector during testingFrequency response:20 - 22 K h z +/- 1.5 dbDigital outputs:Optional: SPDIF/OPTO Toslink or ST-II/AES-EBU balanced by XLRAnalog line outputs:1 one pair RCA at 2.3 mV 250 ohmExternal power supply:100/110/230/240 Vac 50/60 Hz 70 V/aExternal dimension:400 x 308 x 85 ( L x P x H) mm