Experience high-quality sound with the Little Dot MKIII MK3 Headphone Tube Amplifier. This amplifier is suitable for use with a variety of electronic devices and is compatible with different voltage ranges from 110V to 240V. The brand, Little Dot, is known for producing high-quality audio equipment and this model, MK III, lives up to their reputation. This tube amplifier is perfect for those who are looking for an exceptional listening experience. Its features include multiple inputs and outputs, making it easy to connect to other devices. The amplifier is designed to enhance sound quality and make the listening experience more enjoyable. The box damaged. Thanks for looking. Good luck.

Used but in great condition little dot mk iii tube amplifier. Sounds phenomenal with dynamic and even iem yeah I said iem! Tubes still work great, but havent done any tube rolling.

Experience high-quality sound with the Little Dot MKIII MK3 Headphone Tube Amplifier. This amplifier is suitable for use with a variety of electronic devices and is compatible with different voltage ranges from 110V to 240V. The brand, Little Dot, is known for producing high-quality audio equipment and this model, MK III, lives up to their reputation. This tube amplifier is perfect for those who are looking for an exceptional listening experience. Its features include multiple inputs and outputs, making it easy to connect to other devices. The amplifier is designed to enhance sound quality and make the listening experience more enjoyable. The box damaged. Thanks for looking. Good luck.

A used fully functional good condition Little Dot Mk III tube headphone amplifier. Includes multiple extra pre-amp tubes for tube rolling pleasure. Includes original manual (poor condition) and power cable. Includes two brand new 6N6P power output tubes (with NOS boxes included), freshly installed.

NOS (new old stock) mullard ef95 tube vacuum valve cv4010 M8100 nos for little dot mk iii iv

couple (n. 2 pieces) GE 5654 USA 6AK5 EF95 tube vacuum nos for tube amplifier little dot 3 4 III IV

Little Dot Mkiii is a great sounding tube amp. In good condition, no original packaging. Comes with stock tubes 2x 6H6N and 2x RTC5654. Works perfectly with good power and low noise. Very suspectable to ground loop noise make sure you dont have a lot of interference or grounding issues. Comes with the unit, tubes, power cable, set of RCA cables.

  TUBE HUNTER VACUUM TUBE GEMS THESE ARE THE SPECIFICS OF THE TUBE/TUBES/PARTS FOR SALE THESE ARE THE TUBE/TUBES/PARTS FOR SALE:  MANUFACTURER:    GE PRODUCTION CITY:                                    USA TUBE TYPE:  6136 6AU6WB DESIGNATION:                                            PREAMP TUBE YEAR:  1956 MONTH:   WEEK 43 Date code match   SINGLE SILK SCREEN CONDITION %:                  100% MICA:   2 PLATES:  BLACK GM%:  100% USED/ TESTS NOS/ TRUE NOS NIB:   NOS NIB SINGLE/PAIR/QUAD/MULTI:   SINGLE GETTER:                                                         O GETTER DATE CODE                                                    5643 GE 6AU6WB vacuum tubes. These are a great preamp tubes. Made by GE in the 1960s.  I guarantee you will not be disappointed. Normal 0 false false false EN-US X-NONE X-NONE NEW OLD STOCK   NEW IN ORIGINAL BOX. Normal 0 false false false EN-US X-NONE X-NONE On my tester a B&K 747 tester:    Below 55 = BAD      55-66 = ?     65 -100 = Good     100-120+ = NOS     *********************************************************************************** NOTES ON MATCHING: 1. TRIODES SIMILAR TO 12AX7 ARE DONE ON A TEKTRONIX 576 CURVE TRACER IF I HAVE MATCHED THEM WITH THIS MACHINE I GUARANTEE THAT THESE MATCHED PAIRS WILL BE NOT BE ABLE TO DIFFERENTIATED WITH THE HUMAN EAR IN A PREAMP CIRCUIT.  2. ON OTHER TUBE I USE A CALIBRATED HICKOK 600A TO MATCH TUBES. 3. ON MODERN TUBES, FOR WHICH THE 600A CANNOT PERFORM TESTS, I USE THE CALIBRATED B&K 747B TUBE TESTER. NOTES ON THE BOXES. LISTING WILL GENERALLY HAVE INFORMATION ABOUT ANY BOXES ASSOCIATED WITH THE TUBES FOR SALE. THESE ARE THE OPTIONS: 1. ORIGINAL BOXES IN VARYING CONDITION. THESE BOXES WILL BE THE ORIGINAL BOXES THE TUBES CAME IN AND WILL SHOW AGING IN VARYING DEGREES. THESE TUBES ARE ASSUMED TO BE NEW AND WILL TEST AS NOS. 2. NO BOXES PROVIDED (NONE AVAILABLE USUALLY USED AND SHOULD BE ASSUMED TO BE USED UNLESS OTHERWISE STATED. 3. REPURPOSED BOXES. THESE ARE BOXES OF THE SAME MANUFACTURER. THESE WILL HAVE A LABEL OVER THE TUBE NUMBER THAT REFLECTS THE TUBE BEING SOLD. THESE TUBES SHOULD BE ASSUMED TO BE USED UNLESS OTHERWISE STATED. 4. TUBEHUNTER BOXES. THESE ARE BOXES I HAVE MADE WITH GREAT TIME AND EXPENSE TO PROTECT YOUR VACUUM TUBES AND PROVIDE FOR STORAGE AND EASY IDENTIFICATION. TUBES IN THESE BOXES SHOULD BE ASSUMED TO BE USED UNLESS OTHERWISE STATED. 5. WHITE BOXES. SHOULD BE SELF EXPLANATORY. NOTES ON TESTING OF TUBES: THIS IS DONE ON A NUMBER OF TESTING DEVICES 1. TEKTRONIX CURVE TRACER 2. B&K 747 TUBE TESTER 3. MERCURY 1000 DYNAMIC MUTUAL CONDUCTANCE TESTER 4. HICKOK 600A DYNAMIC MUTUAL CONDUCTANCE TUBE TESTER  I test all tubes that I sell in one way or another, or I will state untested. I have a B&K 747 tube tester. This is a mutual conductance tester. It give a percentage value of gm for the tube under test and checks for shorts and grid emissions. I also use a Tektronix curve tracer for testing triodes. I give a number of evaluations for tubes. One evaluation is a screen shot of the tube with a high voltage applied to the plate. This helps the buyer see the linearity of the tube in question at the highest voltage the tube will see in a real circuit. The Curve tracer steps the triode through 10 gate/grid voltages starting with -10 volts and going to 0 volts. The lines show how the tube conducts throughout that range. At 0 volt the tube is at max conduction and is the top line on the display. It is easy at that point to take where that top line intersects the plate voltage, find the milliamp level and compare it to the datasheet. I give those numbers for you in the Item condition box. To further help the buyer I also include the Design values, for gm and ma readings in the table. This can then be compared to other tube sellers using inferior test methods such as Hickok,  Amplitrex, and other testers. The Tektronix curve tracer gives values within 3% of the actual value. The very best portable testers only can approach 10% accuracy. 5.    Please note: The numbers given for gm are what I see on my tester. I DO NOT guarantee that you will see those numbers on your tester. I only guarantee that these tubes will test good, with no shorts, or gas, on a decent calibrated tester. I dont guarantee or imply anything else. 6. VERY IMPORTANT!!! Vintage tube testers almost always, due to age, have VERY LOW HEATER VOLTAGES!!!  Every tester I have ever bought is below 6 volts when selecting 6.3 volts. They average 5.8 volts. The voltage NEEDS to be 6.3 and 12.6. You can calibrate a vintage tube tester all you want. If the heater voltage is not right, you will NEVER get the right gm value. I have customers complain that their tubes are not the same as what I see on my tester. They say they have a calibrated tube tester. I have 40 tube testers. On all of them I have an outside regulated DC power supply that feeds the tube tester the correct heater voltage. 7. I dont check each and every tube for noise or tone. This is SUBJECTIVE and it is too time consuming. If you dont like the noise level or the tone we offer a hassle free refund policy.  8. TESTING RESULTS SHOW HOW THE TUBE IS PERFORMING  NOW.  TESTING RESULTS DO NOT SHOW HOW OLD A TUBE IS OR HOW MANY HOURS IT HAS BEEN USED. HOWEVER IF A TUBE TEST NOS YOU CAN BE ASSURED IT WILL LAST A LONG TIME AND IS WORKING VERY WELL. NOTES ON CUSTOMER RELATIONS: I want to see you happy with your purchase. I will never sell a tube that is below standard…… I have sold many tubes here on Ebay, and all my customers have been completely satisfied. I will work with you in good faith if there are any problems, or if you are unsatisfied in any way. I want your business now and in the future, so I assume you are the boss, and I am the employee. All tubes are tested for shorts, continuity, and emissions. I prefer PayPal. NOTES ON RETURNS: 1.  RETURNS: It is my highest desire that you are completely satisfied with your purchase from me. I will bend over backwards to make sure that you are a happy customer. 2. We almost always have a replacement available of the same or sometimes even higher quality. Please note that it is our desire TO DO BUSINESS! We never rip anyone off.......EVER. 3. If anything you buy from me is less than satisfactory, message me BEFORE you either open a case or hit the “item not as described” button. 4. Sound quality is tremendously SUBJECTIVE. For tubes returned for noise or sound quality of any kind you pay for the shipping we refund the purchase. We refund the price of the item NOT THE SHIPPING COST. If we sent the wrong tube we will of course pay for return shipping. For any tubes that are DOA we require that you send a us a picture of the shipping box to show us the damage. We test EVERY tube sent out and none should be DOA unless broken in shipping. 5.    PLEASE NOTE:  Tube silkscreen (lettering on the tubes) is VERY fragile. It can be wiped off and destroyed VERY easily. If you wipe off the silkscreen while handling the tube you diminish their value by up to 70%. DO NOT handle the tubes or hold them from the cylinder. ALWAYS hold them from the ENDS. If you are returning tubes and they are not in the same condition cosmetically I cannot give you a full refund. THIS IS VERY IMPORTANT. 6.  UNLESS YOU MAKE ARRANGEMENTS WITH US BEFORE YOU PURCHASE, YOU MUST PAY FOR ITEMS PURCHASED WITHIN 2 DAYS OR A CASE WILL BE OPENED FOR AN UNPAID ITEM!!! International customers note: 1. Please wait for us to invoice you for the correct amount. If you have purchased more than one item, we must calculate how much the shipping will be. Shipping will be HIGHER due to insurance and shipping methods needed for expensive item totals. If you are buying only one item this will not be an issue. 2. Under no circumstances will we state on a US customs a declared value of less than the sale price. This is an honesty issue. We are honest with everyone to the best of our ability to do so. We want you to trust that what we say is true. There cannot be that trust, if we make false statements knowingly to anyone. If your country has tariffs/taxes so high that they cause large numbers of normally honest folks to make false statements, we urge you to work for change of those laws. 3 International buyers if you bought more than one item and want combined shipping it will ship in 2 days. 4. And all the Angels sang because the heavenly music was playing and it was turned all the way up.     Listing and template services provided by inkFrog

  TUBE HUNTER VACUUM TUBE GEMS THESE ARE THE SPECIFICS OF THE TUBE/TUBES/PARTS FOR SALE THESE ARE THE TUBE/TUBES/PARTS FOR SALE:  MANUFACTURER:    GE PRODUCTION CITY:                                    USA TUBE TYPE:  6136 6AU6WB DESIGNATION:                                            PREAMP TUBE YEAR:  1956 MONTH:   WEEK 43 Date code match   SINGLE SILK SCREEN CONDITION %:                  100% MICA:   2 PLATES:  BLACK GM%:  100% USED/ TESTS NOS/ TRUE NOS NIB:   NOS NIB SINGLE/PAIR/QUAD/MULTI:   SINGLE GETTER:                                                         O GETTER DATE CODE                                                    5643 GE 6AU6WB vacuum tubes. These are a great preamp tubes. Made by GE in the 1960s.  I guarantee you will not be disappointed. Normal 0 false false false EN-US X-NONE X-NONE NEW OLD STOCK   NEW IN ORIGINAL BOX. Normal 0 false false false EN-US X-NONE X-NONE On my tester a B&K 747 tester:    Below 55 = BAD      55-66 = ?     65 -100 = Good     100-120+ = NOS     *********************************************************************************** NOTES ON MATCHING: 1. TRIODES SIMILAR TO 12AX7 ARE DONE ON A TEKTRONIX 576 CURVE TRACER IF I HAVE MATCHED THEM WITH THIS MACHINE I GUARANTEE THAT THESE MATCHED PAIRS WILL BE NOT BE ABLE TO DIFFERENTIATED WITH THE HUMAN EAR IN A PREAMP CIRCUIT.  2. ON OTHER TUBE I USE A CALIBRATED HICKOK 600A TO MATCH TUBES. 3. ON MODERN TUBES, FOR WHICH THE 600A CANNOT PERFORM TESTS, I USE THE CALIBRATED B&K 747B TUBE TESTER. NOTES ON THE BOXES. LISTING WILL GENERALLY HAVE INFORMATION ABOUT ANY BOXES ASSOCIATED WITH THE TUBES FOR SALE. THESE ARE THE OPTIONS: 1. ORIGINAL BOXES IN VARYING CONDITION. THESE BOXES WILL BE THE ORIGINAL BOXES THE TUBES CAME IN AND WILL SHOW AGING IN VARYING DEGREES. THESE TUBES ARE ASSUMED TO BE NEW AND WILL TEST AS NOS. 2. NO BOXES PROVIDED (NONE AVAILABLE USUALLY USED AND SHOULD BE ASSUMED TO BE USED UNLESS OTHERWISE STATED. 3. REPURPOSED BOXES. THESE ARE BOXES OF THE SAME MANUFACTURER. THESE WILL HAVE A LABEL OVER THE TUBE NUMBER THAT REFLECTS THE TUBE BEING SOLD. THESE TUBES SHOULD BE ASSUMED TO BE USED UNLESS OTHERWISE STATED. 4. TUBEHUNTER BOXES. THESE ARE BOXES I HAVE MADE WITH GREAT TIME AND EXPENSE TO PROTECT YOUR VACUUM TUBES AND PROVIDE FOR STORAGE AND EASY IDENTIFICATION. TUBES IN THESE BOXES SHOULD BE ASSUMED TO BE USED UNLESS OTHERWISE STATED. 5. WHITE BOXES. SHOULD BE SELF EXPLANATORY. NOTES ON TESTING OF TUBES: THIS IS DONE ON A NUMBER OF TESTING DEVICES 1. TEKTRONIX CURVE TRACER 2. B&K 747 TUBE TESTER 3. MERCURY 1000 DYNAMIC MUTUAL CONDUCTANCE TESTER 4. HICKOK 600A DYNAMIC MUTUAL CONDUCTANCE TUBE TESTER  I test all tubes that I sell in one way or another, or I will state untested. I have a B&K 747 tube tester. This is a mutual conductance tester. It give a percentage value of gm for the tube under test and checks for shorts and grid emissions. I also use a Tektronix curve tracer for testing triodes. I give a number of evaluations for tubes. One evaluation is a screen shot of the tube with a high voltage applied to the plate. This helps the buyer see the linearity of the tube in question at the highest voltage the tube will see in a real circuit. The Curve tracer steps the triode through 10 gate/grid voltages starting with -10 volts and going to 0 volts. The lines show how the tube conducts throughout that range. At 0 volt the tube is at max conduction and is the top line on the display. It is easy at that point to take where that top line intersects the plate voltage, find the milliamp level and compare it to the datasheet. I give those numbers for you in the Item condition box. To further help the buyer I also include the Design values, for gm and ma readings in the table. This can then be compared to other tube sellers using inferior test methods such as Hickok,  Amplitrex, and other testers. The Tektronix curve tracer gives values within 3% of the actual value. The very best portable testers only can approach 10% accuracy. 5.    Please note: The numbers given for gm are what I see on my tester. I DO NOT guarantee that you will see those numbers on your tester. I only guarantee that these tubes will test good, with no shorts, or gas, on a decent calibrated tester. I dont guarantee or imply anything else. 6. VERY IMPORTANT!!! Vintage tube testers almost always, due to age, have VERY LOW HEATER VOLTAGES!!!  Every tester I have ever bought is below 6 volts when selecting 6.3 volts. They average 5.8 volts. The voltage NEEDS to be 6.3 and 12.6. You can calibrate a vintage tube tester all you want. If the heater voltage is not right, you will NEVER get the right gm value. I have customers complain that their tubes are not the same as what I see on my tester. They say they have a calibrated tube tester. I have 40 tube testers. On all of them I have an outside regulated DC power supply that feeds the tube tester the correct heater voltage. 7. I dont check each and every tube for noise or tone. This is SUBJECTIVE and it is too time consuming. If you dont like the noise level or the tone we offer a hassle free refund policy.  8. TESTING RESULTS SHOW HOW THE TUBE IS PERFORMING  NOW.  TESTING RESULTS DO NOT SHOW HOW OLD A TUBE IS OR HOW MANY HOURS IT HAS BEEN USED. HOWEVER IF A TUBE TEST NOS YOU CAN BE ASSURED IT WILL LAST A LONG TIME AND IS WORKING VERY WELL. NOTES ON CUSTOMER RELATIONS: I want to see you happy with your purchase. I will never sell a tube that is below standard…… I have sold many tubes here on Ebay, and all my customers have been completely satisfied. I will work with you in good faith if there are any problems, or if you are unsatisfied in any way. I want your business now and in the future, so I assume you are the boss, and I am the employee. All tubes are tested for shorts, continuity, and emissions. I prefer PayPal. NOTES ON RETURNS: 1.  RETURNS: It is my highest desire that you are completely satisfied with your purchase from me. I will bend over backwards to make sure that you are a happy customer. 2. We almost always have a replacement available of the same or sometimes even higher quality. Please note that it is our desire TO DO BUSINESS! We never rip anyone off.......EVER. 3. If anything you buy from me is less than satisfactory, message me BEFORE you either open a case or hit the “item not as described” button. 4. Sound quality is tremendously SUBJECTIVE. For tubes returned for noise or sound quality of any kind you pay for the shipping we refund the purchase. We refund the price of the item NOT THE SHIPPING COST. If we sent the wrong tube we will of course pay for return shipping. For any tubes that are DOA we require that you send a us a picture of the shipping box to show us the damage. We test EVERY tube sent out and none should be DOA unless broken in shipping. 5.    PLEASE NOTE:  Tube silkscreen (lettering on the tubes) is VERY fragile. It can be wiped off and destroyed VERY easily. If you wipe off the silkscreen while handling the tube you diminish their value by up to 70%. DO NOT handle the tubes or hold them from the cylinder. ALWAYS hold them from the ENDS. If you are returning tubes and they are not in the same condition cosmetically I cannot give you a full refund. THIS IS VERY IMPORTANT. 6.  UNLESS YOU MAKE ARRANGEMENTS WITH US BEFORE YOU PURCHASE, YOU MUST PAY FOR ITEMS PURCHASED WITHIN 2 DAYS OR A CASE WILL BE OPENED FOR AN UNPAID ITEM!!! International customers note: 1. Please wait for us to invoice you for the correct amount. If you have purchased more than one item, we must calculate how much the shipping will be. Shipping will be HIGHER due to insurance and shipping methods needed for expensive item totals. If you are buying only one item this will not be an issue. 2. Under no circumstances will we state on a US customs a declared value of less than the sale price. This is an honesty issue. We are honest with everyone to the best of our ability to do so. We want you to trust that what we say is true. There cannot be that trust, if we make false statements knowingly to anyone. If your country has tariffs/taxes so high that they cause large numbers of normally honest folks to make false statements, we urge you to work for change of those laws. 3 International buyers if you bought more than one item and want combined shipping it will ship in 2 days. 4. And all the Angels sang because the heavenly music was playing and it was turned all the way up.     Listing and template services provided by inkFrog

Little Dot Mk III Mk3 amplifier, excellent condition. Have been using this to power my Sennheiser HD650 which sound fantastic. Selling as I have upgraded.

Up for sale/auction is my Little Dot MKIII tube amplifier with extra tubes. Amp is currently setup with Mullard M8100 tubes and the original power tubes - included are several sets of replacement power tubes, additional pairs of M8100 and a pair of tubes marked USA 5654 (RCAs?) - I havent tested all of the additional tubes, but I purchased them as NOS they have been stored properly/not used yet. Also function checked the amp before taking the photos and its working well and sounding smooth! I dont have the power cable but the unit takes a standard C13 cable like most stereo equipment. Thanks for looking!

Little Dot MK III Vacuum Tube headphone pre-amp MKIII MK3 Amplifier.

  TUBE HUNTER VACUUM TUBE GEMS THESE ARE THE SPECIFICS OF THE TUBE/TUBES/PARTS FOR SALE THESE ARE THE TUBE/TUBES/PARTS FOR SALE:  MANUFACTURER:    GE PRODUCTION CITY:                                    USA TUBE TYPE:  6136 6AU6WB DESIGNATION:                                            PREAMP TUBE YEAR:  1956 MONTH:   WEEK 43 Date code match   SINGLE SILK SCREEN CONDITION %:                  100% MICA:   2 PLATES:  BLACK GM%:  100% USED/ TESTS NOS/ TRUE NOS NIB:   NOS NIB SINGLE/PAIR/QUAD/MULTI:   SINGLE GETTER:                                                         O GETTER DATE CODE                                                    5643 GE 6AU6WB vacuum tubes. These are a great preamp tubes. Made by GE in the 1960s.  I guarantee you will not be disappointed. Normal 0 false false false EN-US X-NONE X-NONE NEW OLD STOCK   NEW IN ORIGINAL BOX. Normal 0 false false false EN-US X-NONE X-NONE On my tester a B&K 747 tester:    Below 55 = BAD      55-66 = ?     65 -100 = Good     100-120+ = NOS     *********************************************************************************** NOTES ON MATCHING: 1. TRIODES SIMILAR TO 12AX7 ARE DONE ON A TEKTRONIX 576 CURVE TRACER IF I HAVE MATCHED THEM WITH THIS MACHINE I GUARANTEE THAT THESE MATCHED PAIRS WILL BE NOT BE ABLE TO DIFFERENTIATED WITH THE HUMAN EAR IN A PREAMP CIRCUIT.  2. ON OTHER TUBE I USE A CALIBRATED HICKOK 600A TO MATCH TUBES. 3. ON MODERN TUBES, FOR WHICH THE 600A CANNOT PERFORM TESTS, I USE THE CALIBRATED B&K 747B TUBE TESTER. NOTES ON THE BOXES. LISTING WILL GENERALLY HAVE INFORMATION ABOUT ANY BOXES ASSOCIATED WITH THE TUBES FOR SALE. THESE ARE THE OPTIONS: 1. ORIGINAL BOXES IN VARYING CONDITION. THESE BOXES WILL BE THE ORIGINAL BOXES THE TUBES CAME IN AND WILL SHOW AGING IN VARYING DEGREES. THESE TUBES ARE ASSUMED TO BE NEW AND WILL TEST AS NOS. 2. NO BOXES PROVIDED (NONE AVAILABLE USUALLY USED AND SHOULD BE ASSUMED TO BE USED UNLESS OTHERWISE STATED. 3. REPURPOSED BOXES. THESE ARE BOXES OF THE SAME MANUFACTURER. THESE WILL HAVE A LABEL OVER THE TUBE NUMBER THAT REFLECTS THE TUBE BEING SOLD. THESE TUBES SHOULD BE ASSUMED TO BE USED UNLESS OTHERWISE STATED. 4. TUBEHUNTER BOXES. THESE ARE BOXES I HAVE MADE WITH GREAT TIME AND EXPENSE TO PROTECT YOUR VACUUM TUBES AND PROVIDE FOR STORAGE AND EASY IDENTIFICATION. TUBES IN THESE BOXES SHOULD BE ASSUMED TO BE USED UNLESS OTHERWISE STATED. 5. WHITE BOXES. SHOULD BE SELF EXPLANATORY. NOTES ON TESTING OF TUBES: THIS IS DONE ON A NUMBER OF TESTING DEVICES 1. TEKTRONIX CURVE TRACER 2. B&K 747 TUBE TESTER 3. MERCURY 1000 DYNAMIC MUTUAL CONDUCTANCE TESTER 4. HICKOK 600A DYNAMIC MUTUAL CONDUCTANCE TUBE TESTER  I test all tubes that I sell in one way or another, or I will state untested. I have a B&K 747 tube tester. This is a mutual conductance tester. It give a percentage value of gm for the tube under test and checks for shorts and grid emissions. I also use a Tektronix curve tracer for testing triodes. I give a number of evaluations for tubes. One evaluation is a screen shot of the tube with a high voltage applied to the plate. This helps the buyer see the linearity of the tube in question at the highest voltage the tube will see in a real circuit. The Curve tracer steps the triode through 10 gate/grid voltages starting with -10 volts and going to 0 volts. The lines show how the tube conducts throughout that range. At 0 volt the tube is at max conduction and is the top line on the display. It is easy at that point to take where that top line intersects the plate voltage, find the milliamp level and compare it to the datasheet. I give those numbers for you in the Item condition box. To further help the buyer I also include the Design values, for gm and ma readings in the table. This can then be compared to other tube sellers using inferior test methods such as Hickok,  Amplitrex, and other testers. The Tektronix curve tracer gives values within 3% of the actual value. The very best portable testers only can approach 10% accuracy. 5.    Please note: The numbers given for gm are what I see on my tester. I DO NOT guarantee that you will see those numbers on your tester. I only guarantee that these tubes will test good, with no shorts, or gas, on a decent calibrated tester. I dont guarantee or imply anything else. 6. VERY IMPORTANT!!! Vintage tube testers almost always, due to age, have VERY LOW HEATER VOLTAGES!!!  Every tester I have ever bought is below 6 volts when selecting 6.3 volts. They average 5.8 volts. The voltage NEEDS to be 6.3 and 12.6. You can calibrate a vintage tube tester all you want. If the heater voltage is not right, you will NEVER get the right gm value. I have customers complain that their tubes are not the same as what I see on my tester. They say they have a calibrated tube tester. I have 40 tube testers. On all of them I have an outside regulated DC power supply that feeds the tube tester the correct heater voltage. 7. I dont check each and every tube for noise or tone. This is SUBJECTIVE and it is too time consuming. If you dont like the noise level or the tone we offer a hassle free refund policy.  8. TESTING RESULTS SHOW HOW THE TUBE IS PERFORMING  NOW.  TESTING RESULTS DO NOT SHOW HOW OLD A TUBE IS OR HOW MANY HOURS IT HAS BEEN USED. HOWEVER IF A TUBE TEST NOS YOU CAN BE ASSURED IT WILL LAST A LONG TIME AND IS WORKING VERY WELL. NOTES ON CUSTOMER RELATIONS: I want to see you happy with your purchase. I will never sell a tube that is below standard…… I have sold many tubes here on Ebay, and all my customers have been completely satisfied. I will work with you in good faith if there are any problems, or if you are unsatisfied in any way. I want your business now and in the future, so I assume you are the boss, and I am the employee. All tubes are tested for shorts, continuity, and emissions. I prefer PayPal. NOTES ON RETURNS: 1.  RETURNS: It is my highest desire that you are completely satisfied with your purchase from me. I will bend over backwards to make sure that you are a happy customer. 2. We almost always have a replacement available of the same or sometimes even higher quality. Please note that it is our desire TO DO BUSINESS! We never rip anyone off.......EVER. 3. If anything you buy from me is less than satisfactory, message me BEFORE you either open a case or hit the “item not as described” button. 4. Sound quality is tremendously SUBJECTIVE. For tubes returned for noise or sound quality of any kind you pay for the shipping we refund the purchase. We refund the price of the item NOT THE SHIPPING COST. If we sent the wrong tube we will of course pay for return shipping. For any tubes that are DOA we require that you send a us a picture of the shipping box to show us the damage. We test EVERY tube sent out and none should be DOA unless broken in shipping. 5.    PLEASE NOTE:  Tube silkscreen (lettering on the tubes) is VERY fragile. It can be wiped off and destroyed VERY easily. If you wipe off the silkscreen while handling the tube you diminish their value by up to 70%. DO NOT handle the tubes or hold them from the cylinder. ALWAYS hold them from the ENDS. If you are returning tubes and they are not in the same condition cosmetically I cannot give you a full refund. THIS IS VERY IMPORTANT. 6.  UNLESS YOU MAKE ARRANGEMENTS WITH US BEFORE YOU PURCHASE, YOU MUST PAY FOR ITEMS PURCHASED WITHIN 2 DAYS OR A CASE WILL BE OPENED FOR AN UNPAID ITEM!!! International customers note: 1. Please wait for us to invoice you for the correct amount. If you have purchased more than one item, we must calculate how much the shipping will be. Shipping will be HIGHER due to insurance and shipping methods needed for expensive item totals. If you are buying only one item this will not be an issue. 2. Under no circumstances will we state on a US customs a declared value of less than the sale price. This is an honesty issue. We are honest with everyone to the best of our ability to do so. We want you to trust that what we say is true. There cannot be that trust, if we make false statements knowingly to anyone. If your country has tariffs/taxes so high that they cause large numbers of normally honest folks to make false statements, we urge you to work for change of those laws. 3 International buyers if you bought more than one item and want combined shipping it will ship in 2 days. 4. And all the Angels sang because the heavenly music was playing and it was turned all the way up.     Listing and template services provided by inkFrog

EF91 M8083 CV5377 SPECIAL QUALITY MULLARD MATCHED PAIR NOS BOXED VALVE TUBEMADE IN UKSPECIALLY SELECTED HIGH QUALITY VERSION EF91TESTED NEW AND UNUSEDPACKED IN ORIGINAL BOXES AND CIGAR WRAPPING.1985 DATE CODES

  TUBE HUNTER VACUUM TUBE GEMS THESE ARE THE SPECIFICS OF THE TUBE/TUBES FOR SALE THESE ARE THE TUBE/TUBES FOR SALE:    MANUFACTURER:                               CBS HYTRON PRODUCTION CITY:                                     USA TUBE TYPE:    MINIATURE DESIGNATION:                                             JHY 6AK5 YEAR:    1953 MONTH OR WEEK    17 Date code match   YES SILK SCREEN CONDITION %:                    100% MICA:    2 PLATES:    DEEP BLACK GM %:     123% 122% SINGLE/PAIR/QUAD/MULTI:     PAIR GETTER:                                                          D GETTER DATE CODE                                                  17TH WEEK OF 1953  I was blow away when I tried these in my little dot!!!! NICE VINTAGE NOS NIB ABSOLUTELY BRAND NEW NEVER BEEN USED CBS HYTRON 6AK5 TUBES. MADE FOR THE UNITED STATES MILITARY.  Very sweet music inside.  They sound great in my headphone amp, and they will in yours! On my tester a B&K 747 tester:    Below 55 = BAD      55-66 = ?     65 -100 = Good     100-120+ = NOS    I want to see you happy with your purchase. I will never sell a tube that is below standard…… I have sold many tubes here on Ebay, and all my customers have been completely satisfied. I will work with you in good faith if there are any problems, or if you are unsatisfied in any way. I want your business now and in the future, so I assume you are the boss, and I am the employee. All tubes are tested for shorts, continuity, and emissions. I prefer PayPal. ALL CUSTOMERS PLEASE READ ALL NOTES BEFORE BUYING FROM ME !! 1.  RETURNS: It is my highest desire that you are completely satisfied with your purchase from me. I will bend over backwards to make sure that you are a happy customer. If anything you buy from me is less than satisfactory, message me BEFORE you either open a case or hit the “item not as described” button. Sound quality is tremendously SUBJECTIVE. For tubes returned for noise or sound quality of any kind you pay for the shipping we refund the purchase. We refund the price of the item NOT THE SHIPPING COST. If we sent the wrong tube we will of course pay for return shipping. For any tubes that are DOA we require that you send a us a picture of the shipping box to show us the damage. We test EVERY tube sent out and none should be DOA unless broken in shipping. 2.    PLEASE NOTE:  Tube silkscreen (lettering on the tubes) is VERY fragile. It can be wiped off and destroyed VERY easily. If you wipe off the silkscreen while handling the tube you diminish their value by up to 70%. DO NOT handle the tubes or hold them from the cylinder. ALWAYS hold them from the ENDS. If you are returning tubes and they are not in the same condition cosmetically I cannot give you a full refund. THIS IS VERY IMPORTANT. 3.  UNLESS YOU MAKE ARRANGEMENTS WITH US BEFORE YOU PURCHASE, YOU MUST PAY FOR ITEMS PURCHASED WITHIN 2 DAYS OR A CASE WILL BE OPENED FOR AN UNPAID ITEM!!! 4. TESTING: I test all tubes that I sell in one way or another, or I will state untested. I have a B&K 747 tube tester. This is a mutual conductance tester. It give a percentage value of gm for the tube under test and checks for shorts and grid emissions. I also use a Tektronix curve tracer for testing triodes. I give a number of evaluations for tubes. One evaluation is a screen shot of the tube with a high voltage applied to the plate. This helps the buyer see the linearity of the tube in question at the highest voltage the tube will see in a real circuit. The Curve tracer steps the triode through 10 gate/grid voltages starting with -10 volts and going to 0 volts. The lines show how the tube conducts throughout that range. At 0 volt the tube is at max conduction and is the top line on the display. It is easy at that point to take where that top line intersects the plate voltage, find the milliamp level and compare it to the datasheet. I give those numbers for you in the Item condition box. To further help the buyer I also include the Design values, for gm and ma readings in the table. This can then be compared to other tube sellers using inferior test methods such as Hickok,  Amplitrex, and other testers. The Tektronix curve tracer gives values within 3% of the actual value. The very best portable testers only can approach 10% accuracy.5.    Please note: The numbers given for gm are what I see on my tester. I DO NOT guarantee that you will see those numbers on your tester. I only guarantee that these tubes will test good, with no shorts, or gas, on a decent calibrated tester. I dont guarantee or imply anything else. 6. VERY IMPORTANT!!! Vintage tube testers almost always, due to age, have VERY LOW HEATER VOLTAGES!!!  Every tester I have ever bought is below 6 volts when selecting 6.3 volts. They average 5.8 volts. The voltage NEEDS to be 6.3 and 12.6. You can calibrate a vintage tube tester all you want. If the heater voltage is not right, you will NEVER get the right gm value. I have customers complain that their tubes are not the same as what I see on my tester. They say they have a calibrated tube tester. I have 40 tube testers. On all of them I have an outside regulated DC power supply that feeds the tube tester the correct heater voltage. 7. I dont check each and every tube for noise or tone. This is SUBJECTIVE and it is too time consuming. If you dont like the noise level or the tone we offer a hassle free refund policy.  International customers note: 1. Please wait for us to invoice you for the correct amount. If you have purchased more than one item, we must calculate how much the shipping will be. Shipping will be HIGHER due to insurance and shipping methods needed for expensive item totals. If you are buying only one item this will not be an issue. 2. Under no circumstances will we state on a US customs a declared value of less than the sale price. This is an honesty issue. We are honest with everyone to the best of our ability to do so. We want you to trust that what we say is true. There cannot be that trust, if we make false statements knowingly to anyone. If your country has tariffs/taxes so high that they cause large numbers of normally honest folks to make false statements, we urge you to work for change of those laws. 3 International buyers if you bought more than one item and want combined shipping it will ship in 2 days. 4. And all the Angels sang because the heavenly music was playing and it was turned all the way up.     Listing and template services provided by inkFrog

  TUBE HUNTER VACUUM TUBE GEMS THESE ARE THE SPECIFICS OF THE TUBE/TUBES/PARTS FOR SALE THESE ARE THE TUBE/TUBES/PARTS FOR SALE:  MANUFACTURER:    GE PRODUCTION CITY:                                    USA TUBE TYPE:  6136 6AU6WB DESIGNATION:                                            PREAMP TUBE YEAR:  1956 MONTH:   WEEK 43 Date code match   SINGLE SILK SCREEN CONDITION %:                  100% MICA:   2 PLATES:  BLACK GM%:  100% USED/ TESTS NOS/ TRUE NOS NIB:   NOS NIB SINGLE/PAIR/QUAD/MULTI:   SINGLE GETTER:                                                         O GETTER DATE CODE                                                    5643 GE 6AU6WB vacuum tubes. These are a great preamp tubes. Made by GE in the 1960s.  I guarantee you will not be disappointed. Normal 0 false false false EN-US X-NONE X-NONE NEW OLD STOCK   NEW IN ORIGINAL BOX. Normal 0 false false false EN-US X-NONE X-NONE On my tester a B&K 747 tester:    Below 55 = BAD      55-66 = ?     65 -100 = Good     100-120+ = NOS     *********************************************************************************** NOTES ON MATCHING: 1. TRIODES SIMILAR TO 12AX7 ARE DONE ON A TEKTRONIX 576 CURVE TRACER IF I HAVE MATCHED THEM WITH THIS MACHINE I GUARANTEE THAT THESE MATCHED PAIRS WILL BE NOT BE ABLE TO DIFFERENTIATED WITH THE HUMAN EAR IN A PREAMP CIRCUIT.  2. ON OTHER TUBE I USE A CALIBRATED HICKOK 600A TO MATCH TUBES. 3. ON MODERN TUBES, FOR WHICH THE 600A CANNOT PERFORM TESTS, I USE THE CALIBRATED B&K 747B TUBE TESTER. NOTES ON THE BOXES. LISTING WILL GENERALLY HAVE INFORMATION ABOUT ANY BOXES ASSOCIATED WITH THE TUBES FOR SALE. THESE ARE THE OPTIONS: 1. ORIGINAL BOXES IN VARYING CONDITION. THESE BOXES WILL BE THE ORIGINAL BOXES THE TUBES CAME IN AND WILL SHOW AGING IN VARYING DEGREES. THESE TUBES ARE ASSUMED TO BE NEW AND WILL TEST AS NOS. 2. NO BOXES PROVIDED (NONE AVAILABLE USUALLY USED AND SHOULD BE ASSUMED TO BE USED UNLESS OTHERWISE STATED. 3. REPURPOSED BOXES. THESE ARE BOXES OF THE SAME MANUFACTURER. THESE WILL HAVE A LABEL OVER THE TUBE NUMBER THAT REFLECTS THE TUBE BEING SOLD. THESE TUBES SHOULD BE ASSUMED TO BE USED UNLESS OTHERWISE STATED. 4. TUBEHUNTER BOXES. THESE ARE BOXES I HAVE MADE WITH GREAT TIME AND EXPENSE TO PROTECT YOUR VACUUM TUBES AND PROVIDE FOR STORAGE AND EASY IDENTIFICATION. TUBES IN THESE BOXES SHOULD BE ASSUMED TO BE USED UNLESS OTHERWISE STATED. 5. WHITE BOXES. SHOULD BE SELF EXPLANATORY. NOTES ON TESTING OF TUBES: THIS IS DONE ON A NUMBER OF TESTING DEVICES 1. TEKTRONIX CURVE TRACER 2. B&K 747 TUBE TESTER 3. MERCURY 1000 DYNAMIC MUTUAL CONDUCTANCE TESTER 4. HICKOK 600A DYNAMIC MUTUAL CONDUCTANCE TUBE TESTER  I test all tubes that I sell in one way or another, or I will state untested. I have a B&K 747 tube tester. This is a mutual conductance tester. It give a percentage value of gm for the tube under test and checks for shorts and grid emissions. I also use a Tektronix curve tracer for testing triodes. I give a number of evaluations for tubes. One evaluation is a screen shot of the tube with a high voltage applied to the plate. This helps the buyer see the linearity of the tube in question at the highest voltage the tube will see in a real circuit. The Curve tracer steps the triode through 10 gate/grid voltages starting with -10 volts and going to 0 volts. The lines show how the tube conducts throughout that range. At 0 volt the tube is at max conduction and is the top line on the display. It is easy at that point to take where that top line intersects the plate voltage, find the milliamp level and compare it to the datasheet. I give those numbers for you in the Item condition box. To further help the buyer I also include the Design values, for gm and ma readings in the table. This can then be compared to other tube sellers using inferior test methods such as Hickok,  Amplitrex, and other testers. The Tektronix curve tracer gives values within 3% of the actual value. The very best portable testers only can approach 10% accuracy. 5.    Please note: The numbers given for gm are what I see on my tester. I DO NOT guarantee that you will see those numbers on your tester. I only guarantee that these tubes will test good, with no shorts, or gas, on a decent calibrated tester. I dont guarantee or imply anything else. 6. VERY IMPORTANT!!! Vintage tube testers almost always, due to age, have VERY LOW HEATER VOLTAGES!!!  Every tester I have ever bought is below 6 volts when selecting 6.3 volts. They average 5.8 volts. The voltage NEEDS to be 6.3 and 12.6. You can calibrate a vintage tube tester all you want. If the heater voltage is not right, you will NEVER get the right gm value. I have customers complain that their tubes are not the same as what I see on my tester. They say they have a calibrated tube tester. I have 40 tube testers. On all of them I have an outside regulated DC power supply that feeds the tube tester the correct heater voltage. 7. I dont check each and every tube for noise or tone. This is SUBJECTIVE and it is too time consuming. If you dont like the noise level or the tone we offer a hassle free refund policy.  8. TESTING RESULTS SHOW HOW THE TUBE IS PERFORMING  NOW.  TESTING RESULTS DO NOT SHOW HOW OLD A TUBE IS OR HOW MANY HOURS IT HAS BEEN USED. HOWEVER IF A TUBE TEST NOS YOU CAN BE ASSURED IT WILL LAST A LONG TIME AND IS WORKING VERY WELL. NOTES ON CUSTOMER RELATIONS: I want to see you happy with your purchase. I will never sell a tube that is below standard…… I have sold many tubes here on Ebay, and all my customers have been completely satisfied. I will work with you in good faith if there are any problems, or if you are unsatisfied in any way. I want your business now and in the future, so I assume you are the boss, and I am the employee. All tubes are tested for shorts, continuity, and emissions. I prefer PayPal. NOTES ON RETURNS: 1.  RETURNS: It is my highest desire that you are completely satisfied with your purchase from me. I will bend over backwards to make sure that you are a happy customer. 2. We almost always have a replacement available of the same or sometimes even higher quality. Please note that it is our desire TO DO BUSINESS! We never rip anyone off.......EVER. 3. If anything you buy from me is less than satisfactory, message me BEFORE you either open a case or hit the “item not as described” button. 4. Sound quality is tremendously SUBJECTIVE. For tubes returned for noise or sound quality of any kind you pay for the shipping we refund the purchase. We refund the price of the item NOT THE SHIPPING COST. If we sent the wrong tube we will of course pay for return shipping. For any tubes that are DOA we require that you send a us a picture of the shipping box to show us the damage. We test EVERY tube sent out and none should be DOA unless broken in shipping. 5.    PLEASE NOTE:  Tube silkscreen (lettering on the tubes) is VERY fragile. It can be wiped off and destroyed VERY easily. If you wipe off the silkscreen while handling the tube you diminish their value by up to 70%. DO NOT handle the tubes or hold them from the cylinder. ALWAYS hold them from the ENDS. If you are returning tubes and they are not in the same condition cosmetically I cannot give you a full refund. THIS IS VERY IMPORTANT. 6.  UNLESS YOU MAKE ARRANGEMENTS WITH US BEFORE YOU PURCHASE, YOU MUST PAY FOR ITEMS PURCHASED WITHIN 2 DAYS OR A CASE WILL BE OPENED FOR AN UNPAID ITEM!!! International customers note: 1. Please wait for us to invoice you for the correct amount. If you have purchased more than one item, we must calculate how much the shipping will be. Shipping will be HIGHER due to insurance and shipping methods needed for expensive item totals. If you are buying only one item this will not be an issue. 2. Under no circumstances will we state on a US customs a declared value of less than the sale price. This is an honesty issue. We are honest with everyone to the best of our ability to do so. We want you to trust that what we say is true. There cannot be that trust, if we make false statements knowingly to anyone. If your country has tariffs/taxes so high that they cause large numbers of normally honest folks to make false statements, we urge you to work for change of those laws. 3 International buyers if you bought more than one item and want combined shipping it will ship in 2 days. 4. And all the Angels sang because the heavenly music was playing and it was turned all the way up.     Listing and template services provided by inkFrog