Experience the ultimate sound quality with the Micro-Acoustics MA2002E Phono Cartridge. Designed for music lovers, this high-performance cartridge is compatible with all universal brands. With its precise and accurate tracking, you can enjoy your vinyl collection to the fullest. 2002-E is truly a high-compliance cartridge, which can track the loudest of recorded passages at 1 gram pressure, for minimum record and stylus wear. Specifications Stylus: 0.0002 x 0.0007 elliptical diamond Cantilever: beryllium Frequency response: 5Hz to 20kHz Tracking force: 0.7 to 1.4g Cartridge weight: 4g Channel separation: 30dB Output voltage: 3.5mV Load requirement: 10K to 100K ohms Cable capacity: 100 to 1500pF Tested and sounds great on my pioneer turntable.

Complete original condition Micro Acoustics MA2002e, fully tested and guaranteed. Diamond has been examined with a microscope with the included image provided showing very little to no wear to the original nude diamond. Complete, original, tested, performance-verified and warranted Micro-Acoustics MA 2002e moving magnet compatible direct-coupled electret (Piezo) phonograph cartridge featuring the original extremely high quality nude round shank low mass, high polish, grain-oriented, jewelry grade, .2 x .7 mil elliptical diamond stylus and the ORIGINAL rare BERYLLIUM bar cantilever. Why so special? Because this is already a rare cartridge with the intact beryllium cantilever. Beryllium is THE BEST cantilever material there is because it is lightweight, insanely rigid, and possesses vibration transmission speeds unparalleled by other materials. It is rare these days because beryllium has been banned for use as a cantilever material due to the toxicity of the tiny shavings created when it is being machined. This cantilever was machined long ago and so possesses none of the toxicity issues. Micro-Acoustics cartridges are truly unique in that they are not magnetic as 99% of cartridges are. The cartridge is not hampered, therefore, by the magnetic compromise, which is caused by too much voltage being generated at high frequency that must be dealt with using a variety of strategies like the RIAA curve. In addition, they are not limited by slow magnetic saturation time. Piezo cartridges generate instant electrical signals which greatly improves attack transient response, making transients sound much more realistic from the very beginning of the attack. The Micro-Acoustics cartridge demonstrates a clean, effortless high frequency response, excellent tracking, and a unique, satisfying audio experience. Micro-Acoustics Model 2002-e Specifications - Stylus Configuration: .0002 x .0007 elliptical diamond - Frequency Response: 5 ~ 20kHz +/- 1.5dB - Tracking Force Range: 0.7 - 1.4 grams - Cartridge Weight: 4 grams - Channel Separation: Nominally 30dB at 1kHz, 15dB at 10kHz (TESTING over 35dB!!!!) - Output voltage: 3.5 mV each channel at 5 cm/sec. peak recorded velocity - Load Requirements: 10k to 100k (not critical) - Cable Capacity: 100pF tp 1,500pF (not critical) Notes: (1) All measurements made with CBS STR-100 Test Record. (2) All MA styli are light beam oriented under microscope for optimum relationship between stylus and cantilever. About Micro-Acoustics Micro-Acoustics Corporation is an innovative company organized in 1969 to develop and manufacture superior products for professional and home audio fields. The accomplishments of their engineering staff include: - Developement of the landmark CBS Laboratories Test Record Series, used for test purposes by many manufacturers of high fidelity cartridges, as well as numerous independent reviewers. - Development and manufacture of the Micro-Point Recording Stylus, an ultra-precision cutting tool and criticalc component in the disc mastering process, used virtually by all leading recording companies. More than 300 million long-playing stereo records each year were manufactured from masters cut with Micro-Point styli. - Products like the 2002e direct coupled electret stereo cartridge that advanced the state of the art by providing master-tape fidelity from records. Features of the 2002-e Cartridge ? Low Mass. The low cartridge weight of 4.0 grams is possible because of the lightweight electret transducer. Low mass allows the cartridge-tonearm system to track warped and eccentric records without warp or flutter. ? Pure-gold connecting wires for reliability and low loss. ? Mechanical dampers. The cartridge mechanical system is precisely controlled by a configuration of 8 damping blocks. This critical damping system achieves optimum transient response, while allowing the 2002-e to track the heaviest groove modulations at 1 gram or less. ? Retainer ring assures precise, positive positioning when the stylus assembly is inserted into the cartridge body. ? Elliptical diamond stylus. The playback stylus is shaped and polished with the same care as the world-famous Micro-Point recording styli. ? Beryllium stylus bar. Beryllium is the ideal stylus-bar material. It is 36% lighter than aluminum. By reducing the mass of the moving system, high-frequency transient and tracking ability are significantly improved. ? Dual bearings and resolver for optimum tracking ability and precise signal resolution. The resolver separates the complex stylus vibrations into left and right channels. A perfect pivot, it is balanced by two elastomeric bearings. ? Direct coupling of stylus bar to electret. Coupling the stylus bar to the electrets at this point directly transmits the undulations of the groove to the transducers. This unique method of lossless coupling provides virtually perfect transient ability. ? User-replaceable stylus assembly. ? Electret transducer. A permanently polarized dielectric device best desribed as a low-mass electro-static equivalent of a magnet, it provides superior response because of inherent linearity from 5Hz to 50kHz. ? Micro-circuit. Passive circuit matches the electret transducer's characteristics to preamplifier phono inputs within 1%. Also makes cartridge output purely resistive, eliminating the effect of cable capacitance on frequency response. Resistive output also shunts preamp input, reducing thermal noise. The Micro-Acoustics 2002-e is a low-mass phonograph cartridge, electret transducers which are directly coupled to the stylus assembly by means of a unique resolver mechanism. Essentially a perfect pivot, the resolver mechanism transmits stylus-bar vibrations initiated by the record groove to the transducers with virtually no error or loss, and resolves them into two 45/45 degree signals. The electret transducer is a near-perfect device for transforming mechanical vibrations into corresponding electrical signals. A permanently polarized dielectric devise, it does not require an external voltage souce. When the electret is deflected by the resolver, a voltage develops which is the exact analog of the mechanical vibrations coupled from the groove by the stylus bar and the resolver. The electret's resonance is well above the audio range (60kHz), and is critically clamped by means of special internal damping blocks. The outputs of the electrets are fed into the two channels of a passive integrated circuit, which provides a purely resistive 4,000-ohm output at 3.5 millivolt level. All critical parts are fabricated by Micro-Acoustics at their own plant. After initial assembly of the cartridge, it is placed in a precision alignment fixture, under a high power comparator. Here, minute internal adjustments are made so that the mechanical relationships within the cartridge correspond precisely to the ideal design parameters. Each cartridge is tested for frequency response, sensitivity, channel separation, tracking force and distortion. Only then is the cartridge placed into stock for shipment. The 2002-e was made during the pinnacle age of phono cartridge design and manufacturing and thus represents the best of its time. Please see my feedback and feedback comments and bid with confidence! I stand behind all my retipped cartridges, styli and retipping services. Check my feedback if you’ve got any lingering doubts. The fact is, I can make your cartridge sound as good or better than new because I run a very tight QC regimen. I personally adjust and tune each cartridge until it operates at its best, which isn’t always the case when you buy new. Thanks for looking and, by all means, if you have any old broken or used worn cartridges or styli lying around, please contact me. I am always looking for donors. Competitive prices paid. If you would like the worn diamond on your Micro-Acoustics replaced, please contact me!

Micro-Acoustics MA2002E Phono Cartridge DVM tested good, will need a stylus

Tested and working. The dust cover is in good condition with no cracks or splits. The tonearm rest is broken (see photo). The rest has been glued before multiple times. The cartridge is a Micro Acoustics MA-2002E.