Vintage Mission Electronics Model 700.2 Speakers, 18” See photos for an chips on corners. Sound Great *Fast Shipping, usually ships out on the same day.

haut parleur ENCEINTE Acoustiques MISSION ELECTRONICS M 700 Loudspeakers BON ETAT VISUEL TESTE TRES BON ETAT DE FONCTIONNEMENT PEUT COMPORTE QUELQUES TRACES D UTILISATION VOIR PHOTO

All original. Never tinkered with. Some nicks on the cabinet but nothing unsightly The only issue is that some of the plastic fasteners are loose but that can be replaced easily. Made in England, these speakers boast a powerful 100 W RMS power that will fill any room with your favorite tunes. Connect easily with the wired connectivity and banana jack audio inputs. The sleek black design and compact size make these speakers a perfect addition to any home audio setup. The brand that has been trusted for years, Mission Electronics, brings you these high-quality bookshelf speakers that are sure to impress.

haut parleur ENCEINTE Acoustiques MISSION ELECTRONICS M 700 Loudspeakers BON ETAT VISUEL TESTE TRES BON ETAT DE FONCTIONNEMENT PEUT COMPORTE QUELQUES TRACES D UTILISATION VOIR PHOTO

All original. Never tinkered with. Some nicks on the cabinet but nothing unsightly The only issue is that some of the plastic fasteners are loose but that can be replaced easily. Made in England, these speakers boast a powerful 100 W RMS power that will fill any room with your favorite tunes. Connect easily with the wired connectivity and banana jack audio inputs. The sleek black design and compact size make these speakers a perfect addition to any home audio setup. The brand that has been trusted for years, Mission Electronics, brings you these high-quality bookshelf speakers that are sure to impress.

All original. Never tinkered with. Some nicks on the cabinet but nothing unsightly The only issue is that some of the plastic fasteners are loose but that can be replaced easily. Made in England, these speakers boast a powerful 100 W RMS power that will fill any room with your favorite tunes. Connect easily with the wired connectivity and banana jack audio inputs. The sleek black design and compact size make these speakers a perfect addition to any home audio setup. The brand that has been trusted for years, Mission Electronics, brings you these high-quality bookshelf speakers that are sure to impress.

All original. Never opened. Some nicks on the cabinet but nothing unsightly Made in England, these speakers boast a powerful 100 W RMS power that will fill any room with your favorite tunes. Connect easily with the wired connectivity and banana jack audio inputs. The sleek black design and compact size make these speakers a perfect addition to any home audio setup. The brand that has been trusted for years, Mission Electronics, brings you these high-quality bookshelf speakers that are sure to impress.

Teufel IP 7000 5.1 Blue Ray AV Receiver + DVD Mission Impossible. Zustand: Gebraucht. Versand mit DHL Paket bis 31,5 kg.

haut parleur ENCEINTE Acoustiques MISSION ELECTRONICS M 700 Loudspeakers BON ETAT VISUEL TESTE TRES BON ETAT DE FONCTIONNEMENT PEUT COMPORTE QUELQUES TRACES D UTILISATION VOIR PHOTO

Offered for your consideration is a pair of MISSION 210mm (8 inch nominal) wide-range woofers that were removed from my Model 700S speakers, manufactured in England in 1983. The 700S was an upgraded version of the venerable “woofer above tweeter” Model 700 and used high-frequency drivers from Denmark’s esteemed Vifa to complement these woofers. They are exceptional speakers worthy of preserving.First, I should mention an important point. MISSION produced variations of the 700-series for nearly 20 years and used no less than three different-size woofers, generally smaller and smaller each model generation. If the MISSION woofers you wish to replace have a basket diameter of 210mm (8¼”) and mount at the underside of the “baffle” (go in from back of the cabinet) with four tension clips, as shown in the 700S exploded-view image directly below, you’ve found the right listing!So, please have a look at my large photos and read the remaining description to decide if these superlative MISSION mid/bass woofers are correct for your needs. These MISSION woofers are in clean, excellent condition. They have structurally perfect poly-coated paper cones and flawless voice coil dustcaps, aside from a bit of dust imbedded in the tacky cones’ surface from the years. Plus, the anodized steel baskets are also in great shape with no scratches, dings, or rust and the large ceramic-ferrite magnet structure has no chips or oxidation. Also, I’ve left several inches of +/- input wires soldered to the terminals for the new owner’s convenience in retrofitting to their speakers. It must be noted that the positive terminal (red marking) is on the right terminal on one woofer, the left on the other (which I verified as accurate). And, most importantly, the aged original polyurethane foam surrounds were just replaced with the correct inverted-roll polyether surrounds. Many speaker companies, domestic and foreign used foam for their woofer surrounds from the early 1970’s through 1990’s. Foam offers superior excursion to coated linen and rubber surrounds, but invariably rots and falls apart in 12-20 years no matter what climate you live in. These woofers were no exception; the surrounds were a cracked, gooey/sticky mess. And, as I’m sure most know, proper cone suspension is very important—if you play woofers with faulty surrounds for too long they’ll start to rub the voice coils and ruin them in a short time. As such, surround replacement is critical for correct function. Some of you have replaced woofer surrounds before, so you know it’s a time-consuming process that takes a great deal of patience and a steady hand. First, I carefully removed the unusual cork flange gaskets without breaking them. Then, I thoroughly cleaned the basket flanges and cone edges to remove the old gummy foam and stubborn factory adhesives, which takes some time to do properly, and then glued the inner surrounds to the cones. Next, I glued the outer surrounds to the basket flanges after verifying no coil rub. Lastly, I reaffixed the flange gaskets. I allowed overnight drying of the acrylic glue between each of the steps to achieve the perfect results you see here. Now these woofers in great shape once again—perhaps even better than new with the modern foam surrounds! Naturally, the woofers were fully tested after the new surrounds were installed and sound terrific—very strong and clear with ample bass, fast, detailed midrange, and remarkable upper frequency coverage; they’re very close to being full-range drivers! And, I tested their DC resistance at a well-matched 5.9 and 6.0?, consistent with a nominal 8 ohm driver rating. Lastly, the baskets measure 8¼” in diameter, they stand 4” tall to top of cork gasket, and the mount holes (beneath the gaskets) are spaced 5½” adjacent / 7¾” on the diagonal apart, c-t-c (if considering these woofers for a different version of the MISSION 700, etc.). So, if your MISSION 700S speakers have been sitting idle because the woofers have rotted surrounds, your cherished speakers will be back in action sounding their best in no time!As pictured and described, this splendid, hard-to-find pair of MISSION 210mm woofers with painstakingly restored surrounds is offered at a competitive price. Terms of Sale:I encourage interested parties to ask any questions they may have about this listing before committing to purchase. Payment is due at checkout by PayPal or other accepted methods. These are heavy for 8 woofers, so U.S. mailing addresses will pay $18.95 for very carefully packed shipping via U.S. Postal Service, FedEx, or UPS with tracking and delivery confirmation. International purchases accepted only from those who are able to pay with PayPal including shipping by U.S. Postal Service Global Priority Air Mail. Thanks for looking!*The woofers will be packaged face-to-face, with a piece of cardboard between them, and wrapped with bubble sheets and other protective materials before being placed in a sturdy box. I can’t wire the woofers face-to-face in the usual manner since the mount holes are covered by the gaskets, but the cones, surrounds, and terminals will be fully protected for no disappointments. Just unwrap them carefully from the stacked pair since they won’t be connected to each other. *the cabinet label photo is presented only for donor model reference

Lecteur CD MISSION PCM 7000 VintageA réparer :Tiroir ne s ouvre pas , des touches ne fonctionnent pas laffichage séclaire bonne présentation généraleVENDU DANS L ETAT Envoi par Mondial RelayEconomic shipping to Europe available with Mondial relay (Germany, Belgium, Netherlands, Luxembourg, Spain, Austria, Italy, Portugal)Shipping worldwide, International economic delivery available with Happy Post, contact us for an estimate !

Super Yamaha powerful high quality system with 6 great sounding speakers. The sound is absolutely amazing and the possibilities with the DSP-1 are incredible. If you are into the 80s and 90s HIFI toys this is the system for you. Just add a quality CD player and turntable. System Includes Yamaha AX-700 amplifier with original instruction manualYamaha TX-300 Tuner with AM aerial and ManualYamaha DSP-1 Sound processor with remote and manualYamaha M35 Power amplifier with ManualYamaha KX-400 Tape deck (Requires repair/ servicing) with ManualWharfedale Diamond 3 two pairs with matching wall brackets by AVFMission 737R speakers with spikes and stand.Collection only from HA5 2SH

haut parleur ENCEINTE Acoustiques MISSION ELECTRONICS M 700 Loudspeakers BON ETAT VISUEL TESTE TRES BON ETAT DE FONCTIONNEMENT PEUT COMPORTE QUELQUES TRACES D UTILISATION VOIR PHOTO

Fully working order few scrapes and a small paint stain. Great speakers just downsizing and getting rid of some old bits :)

Good working condition with a few scratches and grazes

Offered for your consideration is a pair of MISSION 210mm (8 inch nominal) wide-range woofers that were removed from my Model 700S speakers, manufactured in England in 1983. The 700S was an upgraded version of the venerable “woofer above tweeter” Model 700 and used high-frequency drivers from Denmark’s esteemed Vifa to complement these woofers. They are exceptional speakers worthy of preserving.First, I should mention an important point. MISSION produced variations of the 700-series for nearly 20 years and used no less than three different-size woofers, generally smaller and smaller each model generation. If the MISSION woofers you wish to replace have a basket diameter of 210mm (8¼”) and mount at the underside of the “baffle” (go in from back of the cabinet) with four tension clips, as shown in the 700S exploded-view image directly below, you’ve found the right listing!So, please have a look at my large photos and read the remaining description to decide if these superlative MISSION mid/bass woofers are correct for your needs. These MISSION woofers are in clean, excellent condition. They have structurally perfect poly-coated paper cones and flawless voice coil dustcaps, aside from a bit of dust imbedded in the tacky cones’ surface from the years. Plus, the anodized steel baskets are also in great shape with no scratches, dings, or rust and the large ceramic-ferrite magnet structure has no chips or oxidation. Also, I’ve left several inches of +/- input wires soldered to the terminals for the new owner’s convenience in retrofitting to their speakers. It must be noted that the positive terminal (red marking) is on the right terminal on one woofer, the left on the other (which I verified as accurate). And, most importantly, the aged original polyurethane foam surrounds were just replaced with the correct inverted-roll polyether surrounds. Many speaker companies, domestic and foreign used foam for their woofer surrounds from the early 1970’s through 1990’s. Foam offers superior excursion to coated linen and rubber surrounds, but invariably rots and falls apart in 12-20 years no matter what climate you live in. These woofers were no exception; the surrounds were a cracked, gooey/sticky mess. And, as I’m sure most know, proper cone suspension is very important—if you play woofers with faulty surrounds for too long they’ll start to rub the voice coils and ruin them in a short time. As such, surround replacement is critical for correct function. Some of you have replaced woofer surrounds before, so you know it’s a time-consuming process that takes a great deal of patience and a steady hand. First, I carefully removed the unusual cork flange gaskets without breaking them. Then, I thoroughly cleaned the basket flanges and cone edges to remove the old gummy foam and stubborn factory adhesives, which takes some time to do properly, and then glued the inner surrounds to the cones. Next, I glued the outer surrounds to the basket flanges after verifying no coil rub. Lastly, I reaffixed the flange gaskets. I allowed overnight drying of the acrylic glue between each of the steps to achieve the perfect results you see here. Now these woofers in great shape once again—perhaps even better than new with the modern foam surrounds! Naturally, the woofers were fully tested after the new surrounds were installed and sound terrific—very strong and clear with ample bass, fast, detailed midrange, and remarkable upper frequency coverage; they’re very close to being full-range drivers! And, I tested their DC resistance at a well-matched 5.9 and 6.0?, consistent with a nominal 8 ohm driver rating. Lastly, the baskets measure 8¼” in diameter, they stand 4” tall to top of cork gasket, and the mount holes (beneath the gaskets) are spaced 5½” adjacent / 7¾” on the diagonal apart, c-t-c (if considering these woofers for a different version of the MISSION 700, etc.). So, if your MISSION 700S speakers have been sitting idle because the woofers have rotted surrounds, your cherished speakers will be back in action sounding their best in no time!As pictured and described, this splendid, hard-to-find pair of MISSION 210mm woofers with painstakingly restored surrounds is offered at a competitive price. Terms of Sale:I encourage interested parties to ask any questions they may have about this listing before committing to purchase. Payment is due at checkout by PayPal or other accepted methods. These are heavy for 8 woofers, so U.S. mailing addresses will pay $18.95 for very carefully packed shipping via U.S. Postal Service, FedEx, or UPS with tracking and delivery confirmation. International purchases accepted only from those who are able to pay with PayPal including shipping by U.S. Postal Service Global Priority Air Mail. Thanks for looking!*The woofers will be packaged face-to-face, with a piece of cardboard between them, and wrapped with bubble sheets and other protective materials before being placed in a sturdy box. I can’t wire the woofers face-to-face in the usual manner since the mount holes are covered by the gaskets, but the cones, surrounds, and terminals will be fully protected for no disappointments. Just unwrap them carefully from the stacked pair since they won’t be connected to each other. *the cabinet label photo is presented only for donor model reference