Blaupunkt 40/148I-GB-5B2-FHKUP-UK 40 LED Main Board TP.MSD309.BP85

Kategorien MainboardsNetzteileT-Con ModuleFernbedienungenStandfüßeSonstiges Versand Wir bieten folgende Versanddienstleister an: Zahlungsarten Wir bieten folgende Zahlungsarten an: Impressum H. Oppolzer Kurt Schumacher Str.41 47608 Geldern schneller Versand Wir versenden Montags bis Freitags. Am Wochenende ist ein Versand leider nicht möglich. 1A Qualität Jedes Ersatzteil wird intensiv getestet und verdeckt gekennzeichnet bevor es in versiegelter ESD Folie verschickt wird. Support Sollten Sie Fragen zu dem Ersatzteil oder der Abwicklung haben, zögern Sie nicht und schreiben uns an.

BLAUPUNKT 32/133I-WB-5B2-HBKUP-EU STUCK IN STANDBY? FLASH IC UF11 TP.MSD309.BP85 PLEASE NOTE THIS ISNT THE MAIN BOARD FOR SALE BUT THE FLASH IC UF11 FOR THE MAIN BOARD!As a result of some people abusing the returns process on ebay I will no longer be selling the programmed spi flash ics for TVs as new other, they will now be sold as spares and repairs. I have had people think they are buying a whole new TV board for £10 and 80p for first class delivery! This I will not tolerate when they cannot be bothered to read the listing details and then ask for a return for there own incompetent mistake! I suggest you look at my feedback for the programmed spi flash ics and make your own mind up. Until ebay does something about this then this is the only way to combat this! Sorry to the majority of buyers but I am sure you will understand.If your Blaupunkt 32/133I-WB-5B2-HBKUP-EU led TV has a corrupted flash ic it can suffer from one of the following symptoms: Stuck on standby, constantly on the channel search, screen image upside down, strange colours on the screen, plus various other issues (if your unsure as to your symptom contact me for further clarification). Simple solution is to replace the SPI Flash ic UF11 with the programmed chip supplied. Once programmed it will be verified that the correct data has been written into the flash ic, this ensures 100% correct data write to the flash IC. This is suitable for the following LED sets: Blaupunkt 32-133I-WB-5B2-HBKUP-EU Main Board TP.MSD309.BP85 Screen Model number suitable for this SPI flash ic is: LC.4U303.001 LSC320AN02 After fitting the kit carry out a Master Reset on the TV by entering the TV Menu. This will then retune the Freeview Channels and set the Country code. Soldering skills are required to remove the spi flash from the PCB without causing damage to any of the surface mount components and to solder the supplied SPI Flash IC. All responsibility is down to you and no liability will be taken for fitting it incorrectly or any damage as a result of fitting it. Please ensure when fitting the ic that the correct orientation of the IC so that the very small dimple is at pin 1 (ask if you are unsure as to the correct way round the ic should be fitted). Good soldering skills are required to fit this SPI Flash IC, if you dont feel capable get someone suitably competent to carry out the procedure. All my items are despatched promptly which is normally same day despatch. Any questions ask away.

BUSH 32/133DVDB STUCK IN STANDBY? FLASH IC UF11 TP.MSD309.BP85 TO RESOLVE ISSUESPLEASE NOTE THIS ISNT THE MAIN BOARD FOR SALE BUT THE PROGRAMMED FLASH IC UF11 FOR THE MAIN BOARD!As a result of some people abusing the returns process on ebay I will no longer be selling the programmed spi flash ics for TVs as new other, they will now be sold as spares and repairs. I have had people think they are buying a whole new TV board for £10 and 80p for first class delivery! This I will not tolerate when they cannot be bothered to read the listing details and then ask for a return for there own incompetent mistake! I suggest you look at my feedback for the programmed spi flash ics and make your own mind up. Until ebay does something about this then this is the only way to combat this! Sorry to the majority of buyers but I am sure you will understand.If your BUSH 32/133DVDB led TV has a corrupted flash ic it can suffer from one of the following symptoms: Stuck on standby, constantly on the channel search, screen image upside down, strange colours on the screen, plus various other issues (if your unsure as to your symptom contact me for further clarification). Simple solution is to replace the SPI Flash ic UF11 with the programmed chip supplied. Once programmed it will be verified that the correct data has been written into the flash ic, this ensures 100% correct data write to the flash IC. If you supply your email address I can supply you files that can used with the USB flash drive to reprogramme the flash ic without removal of the flash ic! Full instructions will also be sent on how to use the files. This is suitable for the following LED sets: BUSH 32/133DVDB Model 32 led TV Main Board TP.MSD309.BP85 C12415 Screen numbers suitable for this SPI flash ic are: LSC320AN02 After fitting the kit carry out a Master Reset on the TV by entering the TV Menu. This will then retune the Freeview Channels and set the Country code. Please ensure when fitting the ic that the correct orientation of the IC so that the very small dimple is at pin 1 (ask if you are unsure as to the correct way round the ic should be fitted). Good soldering skills are required to fit this SPI Flash IC, if you dont feel capable get someone suitably competent to carry out the procedure. All my items are despatched promptly which is normally same day despatch. Any questions ask away.

BLAUPUNKT 39/224I-GB-5B-FHBKUP-UK TP.MSD309.BP85 C12415 STUCK IN STANDBY REPAIR IC UF11 PLEASE NOTE THIS ISNT THE MAIN BOARD FOR SALE BUT IT IS FOR ONE FLASH IC UF11 FOR THE MAIN BOARDAs a result of some people abusing the returns process on ebay I will no longer be selling the programmed spi flash ics for TVs as new other, they will now be sold as spares and repairs. I have had people think they are buying a new TV board for £10 and 80p delivery for first class! This I will not tolerate when they cannot be bothered to read the listing details and then ask for a return for there own incompetent mistake! I suggest you look at my feedback for the programmed spi flash ics and make your own mind up. Until ebay does something about this then this is the only way to combat this! Sorry to the majority of buyers but I am sure you will understand.If your Blaupunkt 39/224I-GB-5B-FHBKUP-UK LED TV is stuck in standby or reboots constantly, continually on channel search, different colours on screen or up side down picture then the SPI Flash could have been corrupted. Simple solution replace SPI Flash ic UF11 with the programmed chip supplied. This is suitable for the following LED sets: Blaupunkt 39inch led tv 39/224I-GB-5B-FHBKUP-UK or Blaupunkt 39/224I-GB-5B-FHBKUP-EU Main Board TP.MSD309.BP85 C12415 Screen number suitable for this SPI FLASH EPROM V390HJ1-LE1 IF YOUR SCREEN MODEL NUMBER AND TV MODEL DOESNT MATCH EXACTLY THEN PLEASE DONT PURCHASE IT! IT WILL NOT WORK OTHERWISE! Soldering skills are required to remove the spi flash from the PCB without causing damage to any of the surface mount components and to solder the supplied SPI Flash IC. After fitting the programmed spi flash ic you will need to carry out a First time installation of the TV to get all the Freeview channels for your country and location. All responsibility is down to you and no liability will be taken for fitting it incorrectly or any damage as a result of fitting it. Good soldering skills are required to fit this SPI Flash IC, if you dont feel capable get someone suitably competent to carryout the procedure. All my items are despatched promptly which is normally same day despatch. Any questions ask away.

International bidders are welcomePlease ask your questions before bidding / buying! Sie erhalten eine Rechnung mit ausgewiesener Mehrwertsteuer. Main Board / MainboardTP.MSD309.BP85C12415Der Artikel ist geprüft und voll funktionstüchtig.Bitte beachten Sie, dass ein falscher Einbau oder andere defekte Teile des TVs das Board zerstören können; daher sollte der Einbau nur durch qualifizierte Kräfte erfolgen! Bitte vergleichen Sie vor dem Kauf immer die Teilenummer sowie die Anschlußstecker des Artikels!Please always compare the part number and the connector of the item before purchasing! (P7299) Lieferumfang: wie abgebildet / OHNE weiteres ZubehörGute und sichere Verpackung wird garantiert. Sollte sich ein Problem ergeben...... Kontaktieren Sie uns bitte, bevor Sie sich an eBay wenden oder uns eine negative Bewertung geben! Denn für jedes Problem gibt es eine Lösung!Unser Service-Team beantwortet gerne Ihre Fragen!Wir werden uns um Ihre Zufriedenheit bemühen und das Problem lösen. Should a problem arise...... Please contact us before contacting eBay or giving us negative feedback! Because for every problem there is a solution!Our service team will be happy to answer your questions!We will strive for your satisfaction and solve the problem.

International bidders are welcome Please ask your questions before bidding / buying! Sie erhalten eine Rechnung mit ausgewiesener Mehrwertsteuer. Mainboard / Main Board Blaupunkt TP.MSD309.BP85 Der Artikel ist geprüft und voll funktionstüchtig. Bitte beachten Sie, dass ein falscher Einbau oder andere defekte Teile des TVs das Board zerstören können; daher sollte der Einbau nur durch qualifizierte Kräfte erfolgen! Bitte vergleichen Sie vor dem Kauf immer die Teilenummer sowie die Anschlußstecker des Artikels! Please always compare the part number and the connector of the item before purchasing! (P7362) Lieferumfang: wie abgebildet / OHNE weiteres Zubehör Gute und sichere Verpackung wird garantiert. Sollte sich ein Problem ergeben... ... Kontaktieren Sie uns bitte, bevor Sie sich an eBay wenden oder uns eine negative Bewertung geben! Denn für jedes Problem gibt es eine Lösung! Unser Service-Team beantwortet gerne Ihre Fragen! Wir werden uns um Ihre Zufriedenheit bemühen und das Problem lösen. Should a problem arise... ... Please contact us before contacting eBay or giving us negative feedback! Because for every problem there is a solution! Our service team will be happy to answer your questions! We will strive for your satisfaction and solve the problem.

International bidders are welcome Please ask your questions before bidding / buying! Sie erhalten eine Rechnung mit ausgewiesener Mehrwertsteuer. Mainboard / Main Board Blaupunkt TP.MSD309.BP85 Der Artikel ist geprüft und voll funktionstüchtig. Bitte beachten Sie, dass ein falscher Einbau oder andere defekte Teile des TVs das Board zerstören können; daher sollte der Einbau nur durch qualifizierte Kräfte erfolgen! Bitte vergleichen Sie vor dem Kauf immer die Teilenummer sowie die Anschlußstecker des Artikels! Please always compare the part number and the connector of the item before purchasing! (P7362) Lieferumfang: wie abgebildet / OHNE weiteres Zubehör Gute und sichere Verpackung wird garantiert. Sollte sich ein Problem ergeben... ... Kontaktieren Sie uns bitte, bevor Sie sich an eBay wenden oder uns eine negative Bewertung geben! Denn für jedes Problem gibt es eine Lösung! Unser Service-Team beantwortet gerne Ihre Fragen! Wir werden uns um Ihre Zufriedenheit bemühen und das Problem lösen. Should a problem arise... ... Please contact us before contacting eBay or giving us negative feedback! Because for every problem there is a solution! Our service team will be happy to answer your questions! We will strive for your satisfaction and solve the problem.

BLAUPUNKT 32/133I-WB-5B2-HBKUP-EU STUCK IN STANDBY? FLASH IC UF11 TP.MSD309.BP85 PLEASE NOTE THIS ISNT THE MAIN BOARD FOR SALE BUT THE FLASH IC UF11 FOR THE MAIN BOARD!As a result of some people abusing the returns process on ebay I will no longer be selling the programmed spi flash ics for TVs as new other, they will now be sold as spares and repairs. I have had people think they are buying a whole new TV board for £10 and 80p for first class delivery! This I will not tolerate when they cannot be bothered to read the listing details and then ask for a return for there own incompetent mistake! I suggest you look at my feedback for the programmed spi flash ics and make your own mind up. Until ebay does something about this then this is the only way to combat this! Sorry to the majority of buyers but I am sure you will understand.If your Blaupunkt 32/133I-WB-5B2-HBKUP-EU led TV has a corrupted flash ic it can suffer from one of the following symptoms: Stuck on standby, constantly on the channel search, screen image upside down, strange colours on the screen, plus various other issues (if your unsure as to your symptom contact me for further clarification). Simple solution is to replace the SPI Flash ic UF11 with the programmed chip supplied. Once programmed it will be verified that the correct data has been written into the flash ic, this ensures 100% correct data write to the flash IC. This is suitable for the following LED sets: Blaupunkt 32-133I-WB-5B2-HBKUP-EU Main Board TP.MSD309.BP85 Screen Model number suitable for this SPI flash ic is: LC.4U303.001 LSC320AN02 After fitting the kit carry out a Master Reset on the TV by entering the TV Menu. This will then retune the Freeview Channels and set the Country code. Soldering skills are required to remove the spi flash from the PCB without causing damage to any of the surface mount components and to solder the supplied SPI Flash IC. All responsibility is down to you and no liability will be taken for fitting it incorrectly or any damage as a result of fitting it. Please ensure when fitting the ic that the correct orientation of the IC so that the very small dimple is at pin 1 (ask if you are unsure as to the correct way round the ic should be fitted). Good soldering skills are required to fit this SPI Flash IC, if you dont feel capable get someone suitably competent to carry out the procedure. All my items are despatched promptly which is normally same day despatch. Any questions ask away.

BLAUPUNKT 32/147I-GB-5B-HKUP-UK STUCK IN STANDBY? SPI FLASH IC UF11 FOR TP.MSD309.BP85PLEASE NOTE THIS ISNT THE MAIN BOARD FOR SALE BUT THE PROGRAMMED FLASH IC UF11 FOR THE MAIN BOARD!As a result of some people abusing the returns process on ebay I will no longer be selling the programmed spi flash ics for TVs as new other, they will now be sold as spares and repairs. I have had people think they are buying a whole new TV board for £10 and 80p for first class delivery! This I will not tolerate when they cannot be bothered to read the listing details and then ask for a return for there own incompetent mistake! I suggest you look at my feedback for the programmed spi flash ics and make your own mind up. Until ebay does something about this then this is the only way to combat this! Sorry to the majority of buyers but I am sure you will understand.If your BLAUPUNKT 32/147I-GB-5B-HKUP-UK led TV has a corrupted flash ic it can suffer from one of the following symptoms: Stuck on standby, constantly on the channel search, screen image upside down, strange colours on the screen, plus various other issues (if your unsure as to your symptom contact me for further clarification). Simple solution is to replace the SPI Flash ic UF11 with the programmed chip supplied. Once programmed it will be verified that the correct data has been written into the flash ic, this ensures 100% correct data write to the flash IC. This is suitable for the following LED sets: BLAUPUNKT 32/147I-GB-5B-HKUP-UK Model 32 led TV Main Board TP.MSD309.BP85 Screen numbers suitable for this SPI flash ic are: 32H2HD LVW320SSDX E2 V1 LVW320SSDX E2 V5 32LTD LVW320SSDX E2 V2 After fitting the kit carry out a Master Reset on the TV by entering the TV Menu. This will then retune the Freeview Channels and set the Country code. Soldering skills are required to remove the spi flash from the PCB without causing damage to any of the surface mount components and to solder the supplied SPI Flash IC.All responsibility is down to you and no liability will be taken for fitting it incorrectly or any damage as a result of fitting it. Please ensure when fitting the ic that the correct orientation of the IC so that the very small dimple is at pin 1 (ask if you are unsure as to the correct way round the ic should be fitted). Good soldering skills are required to fit this SPI Flash IC, if you dont feel capable get someone suitably competent to carry out the procedure. All my items are despatched promptly which is normally same day despatch. Any questions ask away.

BLAUPUNKT 40/133I-WB-5B-FHBKUP-EU TP.MSD309.BP85 STUCK IN STANDBY FLASH IC UF11 PLEASE NOTE THIS ISNT THE MAIN BOARD FOR SALE BUT THE FLASH IC FOR THE MAIN BOARD!As a result of some people abusing the returns process on ebay I will no longer be selling the programmed spi flash ics for TVs as new other, they will now be sold as spares and repairs. I have had people think they are buying a new TV board for £10 and 80p delivery for first class! This I will not tolerate when they cannot be bothered to read the listing details and then ask for a return for there own incompetent mistake! I suggest you look at my feedback for the programmed spi flash ics and make your own mind up. Until ebay does something about this then this is the only way to combat this! Sorry to the majority of buyers but I am sure you will understand. If your BLAUPUNKT 40/133I-WB-5B-FHBKUP-EU TV has a corrupted flash ic it can suffer from one of the following symptoms: Stuck on standby, constantly on the channel search, screen image upside down, strange colours on the screen, plus various other issues (if your unsure as to your symptom contact me for further clarification). Simple solution is to replace the SPI Flash ic UF11 with the programmed chip supplied. Once programmed it will be verified that the correct data has been written into the flash ic, this ensures 100% correct data write to the flash IC. This is suitable for the following LED set: Blaupunkt 40inch led tv 40/133I-WB-5B-FHBKUP-EU or 40/133I-WB-5B-FHBKUP-UK Main Board TP.MSD309.BP85 Screen model numbers suitable for this Blaupunkt 40/133I-WB-5B-FHBKUP-EU LSC400HM06 or LSC400HM09 IF YOUR SCREEN PANEL MODEL NUMBER AND TV MODEL DOESNT MATCH EXACTLY THEN PLEASE DONT PURCHASE IT! IT WILL NOT WORK OTHERWISE! They do a few screen models for this TV so please check before purchasing as it is essential! Soldering skills are required to remove the SMD spi flash from the PCB without causing damage to any of the surface mount components and to solder the supplied SMD SPI Flash IC. All responsibility is down to you and no liability will be taken for fitting it incorrectly or any damage as a result of fitting it. Good soldering skills are required to fit this SMD SPI Flash IC, if you dont feel capable get someone suitably competent to carry out the procedure. All my items are despatched promptly which is normally same day despatch. Any questions ask away.

STUCK IN STANDBY SPI FLASH IC UF11 FOR BLAUPUNKT 32/147I-GB-5B-HBKUP-UK TP.MSD309.BP85 PLEASE NOTE THIS ISNT THE MAIN BOARD FOR SALE BUT THE FLASH IC FOR THE MAIN BOARD!As a result of some people abusing the returns process on ebay I will no longer be selling the programmed spi flash ics for TVs as new other, they will now be sold as spares and repairs. I have had people think they are buying a new TV board for £10 and 80p delivery for first class! This I will not tolerate when they cannot be bothered to read the listing details and then ask for a return for there own incompetent mistake! I suggest you look at my feedback for the programmed spi flash ics and make your own mind up. Until ebay does something about this then this is the only way to combat this! Sorry to the majority of buyers but I am sure you will understand.If your Blaupunkt 32/147I-GB-5B-HBKUP-UK or Blaupunkt 32/147I-GB-5B-HBKUP-EU LED TV is stuck in standby or reboots constantly, continually on channel search, different colours on screen or up side down picture then the SPI Flash could have been corrupted. Simple solution replace the SPI Flash ic UF11 with the programmed chip supplied. This is suitable for the following LED sets: Blaupunkt 32inch led tv 32/147I-GB-5B-HBKUP-EU or the Blaupunkt 32/147I-GB-5B-HBKUP-UK Main Board TP.MSD309.BP85 Screen numbers suitable for this UF11 SPI Flash ic:LVW320LGDX E3 V1 or V2 and LC320DXJ-SF E1 IF YOUR SCREEN MODEL NUMBER AND TV MODEL DOESNT MATCH EXACTLY THEN PLEASE DONT PURCHASE IT! IT WILL NOT WORK OTHERWISE! Soldering skills are required to remove the spi flash from the PCB without causing damage to any of the surface mount components and to solder the supplied SPI Flash IC. All responsibility is down to you and no liability will be taken for fitting it incorrectly or any damage as a result of fitting it. Good soldering skills are required to fit this SPI Flash IC, if you dont feel capable get someone suitably competent to carry out the procedure. All my items are despatched promptly which is normally same day despatch. Any questions ask away.

BLAUPUNKT 32/147I-GB-5B-FHBKU-EU STUCK IN STANDBY? SPI FLASH IC UF11 TP.MSD309.BP85 PLEASE NOTE THIS ISNT THE MAIN BOARD FOR SALE BUT THE FLASH IC UF11 FOR THE MAIN BOARD!As a result of some people abusing the returns process on ebay I will no longer be selling the programmed spi flash ics for TVs as new other, they will now be sold as spares and repairs. I have had people think they are buying a whole new TV board for £10 and 80p for first class delivery! This I will not tolerate when they cannot be bothered to read the listing details and then ask for a return for there own incompetent mistake! I suggest you look at my feedback for the programmed spi flash ics and make your own mind up. Until ebay does something about this then this is the only way to combat this! Sorry to the majority of buyers but I am sure you will understand.If your Blaupunkt 32/147I-GB-5B-FHBKU-EU led TV has a corrupted flash ic it can suffer from one of the following symptoms: Stuck on standby, constantly on the channel search, screen image upside down, strange colours on the screen, plus various other issues (if your unsure as to your symptom contact me for further clarification). Simple solution is to replace the SPI Flash ic UF11 with the programmed chip supplied. Once programmed it will be verified that the correct data has been written into the flash ic, this ensures 100% correct data write to the flash IC. This is suitable for the following LED sets: Blaupunkt 32inch led tv Blaupunkt 32/147I-GB-5B-FHBKU-EU Main Board TP.MSD309.BP85 Screen number suitable for this SPI flash ic is: LVF320SSDX E1 V1 32H2FHD After fitting the kit carry out a Master Reset on the TV by entering the TV Menu. This will then retune the Freeview Channels and set the Country code. Soldering skills are required to remove the spi flash from the PCB without causing damage to any of the surface mount components and to solder the supplied SPI Flash IC. All responsibility is down to you and no liability will be taken for fitting it incorrectly or any damage as a result of fitting it. Please ensure when fitting the ic that the correct orientation of the IC so that the very small dimple is at pin 1 (ask if you are unsure as to the correct way round the ic should be fitted). Good soldering skills are required to fit this SPI Flash IC, if you dont feel capable get someone suitably competent to carry out the procedure. If you are not in the UK and would like the programmed spi flash ic then please contact me for postage prices for your country. Europe is normally £2.50 extra for a non- tracked delivery of 3 to 5 working days contact me if you wish to proceed and I will adjust the listing to allow you to do so. All my items are despatched promptly which is normally same day despatch. Any questions ask away.

BLAUPUNKT 32/141I-GB-5B-HBCUP-EU STUCK IN STANDBY? SPI FLASH IC UF11 FOR TP.MSD309.BP85 PLEASE NOTE THIS ISNT THE MAIN BOARD FOR SALE BUT THE FLASH IC FOR THE MAIN BOARD!As a result of some people abusing the returns process on ebay I will no longer be selling the programmed spi flash ics for TVs as new other, they will now be sold as spares and repairs. I have had people think they are buying a new TV board for £10 and 80p delivery for first class! This I will not tolerate when they cannot be bothered to read the listing details and then ask for a return for there own incompetent mistake! I suggest you look at my feedback for the programmed spi flash ics and make your own mind up. Until ebay does something about this then this is the only way to combat this! Sorry to the majority of buyers but I am sure you will understand.If your 32/141I-GB-5B-HBCUP-EU LED Blaupunkt LED TV is stuck in standby or reboots constantly, continually on channel search, different colours on screen or up side down picture then the SPI Flash ic could have been corrupted. Simple solution replace SPI Flash ic UF11 with the programmed chip supplied. This is suitable for the following LED sets: Blaupunkt 32inch led tv 32/141I-GB-5B-HBCUP-EU or Blaupunkt 32/141I-GB-5B-HBCUP-UK Main Board TP.MSD309.BP85 Screen numbers suitable for this SPI EPROM LVW320LGDX E3 V1 or V2 IF YOUR SCREEN MODEL NUMBER AND TV MODEL DOESNT MATCH EXACTLY THEN PLEASE DONT PURCHASE IT! IT WILL NOT WORK OTHERWISE! Soldering skills are required to remove the spi flash from the PCB without causing damage to any of the surface mount components and to solder the supplied SPI Flash IC. After fitting the programmed spi flash ic you will need to carry out a First time installation of the TV to get all the Freeview channels for your country and location. All responsibility is down to you and no liability will be taken for fitting it incorrectly or any damage as a result of fitting it.Good soldering skills are required to fit this SPI Flash IC, if you dont feel capable get someone suitably competent to carry out the procedure. All my items are despatched promptly which is normally same day despatch. Any questions ask away.

BLAUPUNKT 32/146i-GB-5B-HBKUP-UK TP.MSD309.BP85 STUCK IN STANDBY REPAIR IC UF11 PLEASE NOTE THIS ISNT THE MAIN BOARD FOR SALE BUT IT IS FOR ONE FLASH IC UF11 FOR THE MAIN BOARDAs a result of some people abusing the returns process on ebay I will no longer be selling the programmed spi flash ics for TVs as new other, they will now be sold as spares and repairs. I have had people think they are buying a new TV board for £10 and 80p delivery for first class! This I will not tolerate when they cannot be bothered to read the listing details and then ask for a return for there own incompetent mistake! I suggest you look at my feedback for the programmed spi flash ics and make your own mind up. Until ebay does something about this then this is the only way to combat this! Sorry to the majority of buyers but I am sure you will understand.If your 32/146i-GB-5B-HBKUP-UK LED Blaupunkt LED TV is stuck in standby or reboots constantly, continually on channel search, different colours on screen or up side down picture then the SPI Flash could have been corrupted. Simple solution replace SPI Flash ic UF11 with the programmed chip supplied. This is suitable for the following LED set: Blaupunkt 32inch led tv 32/146i-GB-5B-HBKUP-UK Main Board TP.MSD309.BP85 Screen numbers suitable for this SPI EPROM 32H2HD LVW320SSDX E2 V1 LVW320SSDX E2 V5 32LTD LVW320SSDX E2 V2 LVW320SSDX E2 V6 32LTDHD The label on motherboard being LSC320AN02-A IF YOUR SCREEN MODEL NUMBER AND TV MODEL DOESNT MATCH EXACTLY THEN PLEASE DONT PURCHASE IT! IT WILL NOT WORK OTHERWISE! Soldering skills are required to remove the spi flash from the PCB without causing damage to any of the surface mount components and to solder the supplied SPI Flash IC. After fitting the programmed spi flash ic you will need to carry out a First time installation ofthe TV to get all the Freeview channels for your country and location. All responsibility is down to you and no liability will be taken for fitting it incorrectly or any damage as a result of fitting it. Good soldering skills are required to fit this SPI Flash IC, if you dont feel capable get someone suitably competent to carryout the procedure. All my items are despatched promptly which is normally same day despatch. Any questions ask away.

BLAUPUNKT 32/146i-GB-5B-HKUP-UK TP.MSD309.BP85 STUCK IN STANDBY REPAIR IC UF11 PLEASE NOTE THIS ISNT THE MAIN BOARD FOR SALE BUT THE FLASH IC UF11 FOR THE MAIN BOARDAs a result of some people abusing the returns process on ebay I will no longer be selling the programmed spi flash ics for TVs as new other, they will now be sold as spares and repairs. I have had people think they are buying a new TV board for £10 and 80p delivery for first class! This I will not tolerate when they cannot be bothered to read the listing details and then ask for a return for there own incompetent mistake! I suggest you look at my feedback for the programmed spi flash ics and make your own mind up. Until ebay does something about this then this is the only way to combat this! Sorry to the majority of buyers but I am sure you will understand.If your 32/146i-GB-5B-HKUP-UK LED Blaupunkt LED TV is stuck in standby or reboots constantly, continually on channel search, different colours on screen or up side down picture then the SPI Flash could have been corrupted. Simple solution replace SPI Flash ic UF11 with the programmed chip supplied. This is suitable for the following LED set: Blaupunkt 32inch led tv 32/146i-GB-5B-HKUP-UK Main Board TP.MSD309.BP85 Screen numbers suitable for this SPI EPROMLVW320SSDX 32LTD The label on motherboard being LSC320AN02-A IF YOUR SCREEN MODEL NUMBER AND TV MODEL DOESNT MATCH EXACTLY THEN PLEASE DONT PURCHASE IT! IT WILL NOT WORK OTHERWISE! Soldering skills are required to remove the spi flash from the PCB without causing damage to any of the surface mount components and to solder the supplied SPI Flash IC. After fitting the programmed spi flash ic you will need to carry out a First time installation ofthe TV to get all the Freeview channels for your country and location.All responsibility is down to you and no liability will be taken for fitting it incorrectly or any damage as a result of fitting it. Good soldering skills are required to fit this SPI Flash IC, if you dont feel capable get someone suitably competent to carryout the procedure. If you are not in the UK and would like the programmed spi flash ic then please contact me for postage prices for your country. All my items are despatched promptly which is normally same day despatch. Any questions ask away.

BLAUPUNKT 32/133I-WB-5B2-HBKUP-EU STUCK IN STANDBY? FLASH IC UF11 TP.MSD309.BP85 PLEASE NOTE THIS ISNT THE MAIN BOARD FOR SALE BUT THE FLASH IC UF11 FOR THE MAIN BOARD!As a result of some people abusing the returns process on ebay I will no longer be selling the programmed spi flash ics for TVs as new other, they will now be sold as spares and repairs. I have had people think they are buying a whole new TV board for £10 and 80p for first class delivery! This I will not tolerate when they cannot be bothered to read the listing details and then ask for a return for there own incompetent mistake! I suggest you look at my feedback for the programmed spi flash ics and make your own mind up. Until ebay does something about this then this is the only way to combat this! Sorry to the majority of buyers but I am sure you will understand.If your Blaupunkt 32/133I-WB-5B2-HBKUP-EU led TV has a corrupted flash ic it can suffer from one of the following symptoms: Stuck on standby, constantly on the channel search, screen image upside down, strange colours on the screen, plus various other issues (if your unsure as to your symptom contact me for further clarification). Simple solution is to replace the SPI Flash ic UF11 with the programmed chip supplied. Once programmed it will be verified that the correct data has been written into the flash ic, this ensures 100% correct data write to the flash IC. This is suitable for the following LED sets: Blaupunkt 32-133I-WB-5B2-HBKUP-EU Main Board TP.MSD309.BP85 Screen Model number suitable for this SPI flash ic is: LC.4U303.001 LSC320AN02 After fitting the kit carry out a Master Reset on the TV by entering the TV Menu. This will then retune the Freeview Channels and set the Country code. Soldering skills are required to remove the spi flash from the PCB without causing damage to any of the surface mount components and to solder the supplied SPI Flash IC. All responsibility is down to you and no liability will be taken for fitting it incorrectly or any damage as a result of fitting it. Please ensure when fitting the ic that the correct orientation of the IC so that the very small dimple is at pin 1 (ask if you are unsure as to the correct way round the ic should be fitted). Good soldering skills are required to fit this SPI Flash IC, if you dont feel capable get someone suitably competent to carry out the procedure. All my items are despatched promptly which is normally same day despatch. Any questions ask away.

STUCK IN STANDBY SPI FLASH IC UF11 FOR BLAUPUNKT 40/133I-WB-5B-FHKUP-UK TP.MSD309.BP85As a result of some people abusing the returns process on ebay I will no longer be selling the programmed spi flash ics for TVs as new other, they will now be sold as spares and repairs. I have had people think they are buying a new TV board for £10 and 80p delivery for first class! This I will not tolerate when they cannot be bothered to read the listing details and then ask for a return for there own incompetent mistake! I suggest you look at my feedback for the programmed spi flash ics and make your own mind up. Until ebay does something about this then this is the only way to combat this! Sorry to the majority of buyers but I am sure you will understand.If your BLAUPUNKT 40/133I-WB-5B-FHKUP-UK TV has a corrupted flash ic it can suffer from one of the following symptoms: Stuck on standby, constantly on the channel search, screen image upside down, strange colours on the screen, plus various other issues (if your unsure as to your symptom contact me for further clarification).Simple solution is to replace the SPI Flash ic UF11 with the programmed chip supplied. Once programmed it will be verified that the correct data has been written into the flash ic, this ensures 100% correct data write to the flash IC.This is suitable for the following LED set:Blaupunkt 40inch led tv 40/133I-WB-5B-FHKUP-UKMain Board TP.MSD309.BP85Screen model numbers suitable for this Blaupunkt 40/133I-WB-5B-FHKUP-UKLSC400HM06-A or LSC400HM09 IF YOUR SCREEN PANEL MODEL NUMBER AND TV MODEL DOESNT MATCH EXACTLY THEN PLEASE DONT PURCHASE IT! IT WILL NOT WORK OTHERWISE!They do a few screen models for this TV so please check before purchasing as it is essential!Soldering skills are required to remove the SMD spi flash from the PCB without causing damage to any of the surface mount components and to solder the supplied SMD SPI Flash IC. All responsibility is down to you and no liability will be taken for fitting it incorrectly or any damage as a result of fitting it.Good soldering skills are required to fit this SMD SPI Flash IC, if you dont feel capable get someone suitably competent to carry out the procedure.All my items are despatched promptly which is normally same day despatch.Any Questions ask away.

E-MOTION 32/147I-GB-5B-HKUP-UK STUCK IN STANDBY? SPI FLASH IC UF11 FOR TP.MSD309.BP85PLEASE NOTE THIS ISNT THE MAIN BOARD FOR SALE BUT THE PROGRAMMED FLASH IC UF11 FOR THE MAIN BOARD!As a result of some people abusing the returns process on ebay I will no longer be selling the programmed spi flash ics for TVs as new other, they will now be sold as spares and repairs. I have had people think they are buying a whole new TV board for £10 and 80p for first class delivery! This I will not tolerate when they cannot be bothered to read the listing details and then ask for a return for there own incompetent mistake! I suggest you look at my feedback for the programmed spi flash ics and make your own mind up. Until ebay does something about this then this is the only way to combat this! Sorry to the majority of buyers but I am sure you will understand.If your E-MOTION 32/147I-GB-5B-HKUP-UK led TV has a corrupted flash ic it can suffer from one of the following symptoms: Stuck on standby, constantly on the channel search, screen image upside down, strange colours on the screen, plus various other issues (if your unsure as to your symptom contact me for further clarification). Simple solution is to replace the SPI Flash ic UF11 with the programmed chip supplied. Once programmed it will be verified that the correct data has been written into the flash ic, this ensures 100% correct data write to the flash IC. This is suitable for the following LED sets: E-MOTION 32/147I-GB-5B-HKUP-UK Model Ref: E32U147THD 32 led TV Main Board TP.MSD309.BP85 Screen numbers suitable for this SPI flash ic are: 32H2HD LVW320SSDX E2 V1 LVW320SSDX E2 V5 32LTD LVW320SSDX E2 V2 After fitting the kit carry out a Master Reset on the TV by entering the TV Menu. This will then retune the Freeview Channels and set the Country code. Soldering skills are required to remove the spi flash from the PCB without causing damage to any of the surface mount components and to solder the supplied SPI Flash IC. All responsibility is down to you and no liability will be taken for fitting it incorrectly or any damage as a result of fitting it. Please ensure when fitting the ic that the correct orientation of the IC so that the very small dimple is at pin 1 (ask if you are unsure as to the correct way round the ic should be fitted). Good soldering skills are required to fit this SPI Flash IC, if you dont feel capable get someone suitably competent to carry out the procedure. All my items are despatched promptly which is normally same day despatch. Any questions ask away.

UMC 32/146I-GB-5B-HBKUP-EU STUCK IN STANDBY? FLASH IC UF11 TP.MSD309.BP85 PLEASE NOTE THIS ISNT THE MAIN BOARD FOR SALE BUT THE FLASH IC UF11 FOR THE MAIN BOARD!As a result of some people abusing the returns process on ebay I will no longer be selling the programmed spi flash ics for TVs a s new other, they will now be sold as spares and repairs. I have had people think they are buying a whole new TV board for £10 and 80p for first class delivery! This I will not tolerate when they cannot be bothered to read the listing details and then ask for a return for there own incompetent mistake! I suggest you look at my feedback for the programmed spi flash ics and make your own mind up. Until ebay does something about this then this is the only way to combat this! Sorry to the majority of buyers but I am sure you will understand.If your UMC 32/146I-GB-5B-HBKUP-EU led TV has a corrupted flash ic it can suffer from one of the following symptoms: Stuck on standby, constantly on the channel search, screen image upside down, strange colours on the screen, plus various other issues (if your unsure as to your symptom contact me for further clarification). Simple solution is to replace the SPI Flash ic UF11 with the programmed chip supplied. Once programmed it will be verified that the correct data has been written into the flash ic, this ensures 100% correct data write to the flash IC. This is suitable for the following LED sets: UMC 32/146I-GB-5B-HBKUP-EU 32inch led tvModel ref: U3PF146TBKP Main Board TP.MSD309.BP85 Screen numbers suitable for this SPI flash ic are: 32H2HD LVW320SSDX E2 V1 LVW320SSDX E2 V532LTD LVW320SSDX E2 V2 LVW320SSDX E2 V6 32LTDHD After fitting the kit carry out a Master Reset on the TV by entering the TV Menu. This will then retune the Freeview Channels and set the Country code.Soldering skills are required to remove the spi flash from the PCB without causing damage to any of the surface mount components and to solder the supplied SPI Flash IC. All responsibility is down to you and no liability will be taken for fitting it incorrectly or any damage as a result of fitting it.Good soldering skills are required to fit this SPI Flash IC, if you dont feel capable get someone suitably competent to carry out the procedure. All my items are despatched promptly which is normally same day despatch.Any questions ask away.

BUSH 32/133DVDB STUCK IN STANDBY? FLASH IC UF11 TP.MSD309.BP85 TO RESOLVE ISSUESPLEASE NOTE THIS ISNT THE MAIN BOARD FOR SALE BUT THE PROGRAMMED FLASH IC UF11 FOR THE MAIN BOARD!As a result of some people abusing the returns process on ebay I will no longer be selling the programmed spi flash ics for TVs as new other, they will now be sold as spares and repairs. I have had people think they are buying a whole new TV board for £10 and 80p for first class delivery! This I will not tolerate when they cannot be bothered to read the listing details and then ask for a return for there own incompetent mistake! I suggest you look at my feedback for the programmed spi flash ics and make your own mind up. Until ebay does something about this then this is the only way to combat this! Sorry to the majority of buyers but I am sure you will understand.If your BUSH 32/133DVDB led TV has a corrupted flash ic it can suffer from one of the following symptoms: Stuck on standby, constantly on the channel search, screen image upside down, strange colours on the screen, plus various other issues (if your unsure as to your symptom contact me for further clarification). Simple solution is to replace the SPI Flash ic UF11 with the programmed chip supplied. Once programmed it will be verified that the correct data has been written into the flash ic, this ensures 100% correct data write to the flash IC. If you supply your email address I can supply you files that can used with the USB flash drive to reprogramme the flash ic without removal of the flash ic! Full instructions will also be sent on how to use the files. This is suitable for the following LED sets: BUSH 32/133DVDB Model 32 led TV Main Board TP.MSD309.BP85 C12415 Screen numbers suitable for this SPI flash ic are: LSC320AN02 After fitting the kit carry out a Master Reset on the TV by entering the TV Menu. This will then retune the Freeview Channels and set the Country code. Please ensure when fitting the ic that the correct orientation of the IC so that the very small dimple is at pin 1 (ask if you are unsure as to the correct way round the ic should be fitted). Good soldering skills are required to fit this SPI Flash IC, if you dont feel capable get someone suitably competent to carry out the procedure. All my items are despatched promptly which is normally same day despatch. Any questions ask away.

BLAUPUNKT 32/133I-WB-5B2-HKUP-UK STUCK IN STANDBY? FLASH IC UF11 TP.MSD309.BP85PLEASE NOTE THIS ISNT THE MAIN BOARD FOR SALE BUT THE FLASH IC UF11 FOR THE MAIN BOARD!As a result of some people abusing the returns process on ebay I will no longer be selling the programmed spi flash ics for TVs as new other, they will now be sold as spares and repairs. I have had people think they are buying a whole new TV board for £10 and 80p for first class delivery! This I will not tolerate when they cannot be bothered to read the listing details and then ask for a return for there own incompetent mistake! I suggest you look at my feedback for the programmed spi flash ics and make your own mind up. Until ebay does something about this then this is the only way to combat this! Sorry to the majority of buyers but I am sure you will understand.If your Blaupunkt 32/133I-WB-5B2-HKUP-UK led TV has a corrupted flash ic it can suffer from one of the following symptoms: Stuck on standby, constantly on the channel search, screen image upside down, strange colours on the screen, plus various other issues (if your unsure as to your symptom contact me for further clarification). Simple solution is to replace the SPI Flash ic UF11 with the programmed chip supplied. Once programmed it will be verified that the correct data has been written into the flash ic, this ensures 100% correct data write to the flash IC. This is suitable for the following LED sets: Blaupunkt 32/133I-WB-5B2-HKUP-UK 32inch led tv Model ref: B32U133TCHD Main Board TP.MSD309.BP85 Screen number suitable for this SPI flash ic are: LSC320AN02 I will also supply you with the files necessary to use with a usb memory stick to reprogram the existing flash ic. This doesnt always work but can if it does save you time in removing the existing flash ic and re-soldering the new programmed flash ic onto your TV board. I will need from you your email address so that the information and instructions can be sent to you. All responsibility is down to you and no liability will be taken for fitting it incorrectly or any damage as a result of fitting it. Please ensure when fitting the ic that the correct orientation of the IC so that the very small dimple is at pin 1 (ask if you are unsure as to the correct way round the ic should be fitted).Good soldering skills are required to fit this SPI Flash IC, if you dont feel capable get someone suitably competent to carry out the procedure. All my items are despatched promptly which is normally same day despatch. Any questions ask away.