*** LAST PRICE ADJUSTMENT. LISTING COMES DOWN IN 3 DAYS*** Nakamichi SR-2A Stereo Receiver. Very Nice cosmetic condition. Working condition - some static when volume is being adjusted but then it locks in. Nice sound. Manual included.

This Nakamichi SR-3A Stasis Stereo Receiver Missing one button. Powers up and appears be working. Came from a home family room. LCD display is weak. Couple scratches as seen in pics.

LISTED FOR PARTS OR REPAIRS BECAUSE UNABLE TO TEST BEYOND BEING ABLE TO TURN ON AS SHOWN IN PICS. SEE ALL PICTURES FOR COSMETIC CONDITION.

Nakamichi SR-4A STASIS Stereo Receiver. The receiver is in excellent working condition and delivers outstanding sound. The SR-4As exterior is in very good condition with a few minor blemishes (see photos). This vintage Receiver with its STASIS power amplifier and10-preset PLL Quartz-Lock FM/AM tuner still stands up to the test of time with its wonderful clear, deep sound. Included: SR-4A STASIS Stereo Receiver Nakamichi RM-4SR remote Manual Original box I am the original owner. Serial #D106 09201 Specifications: Power Amplifier Section Continuous Average Output Power (IHF-A) : 60 watts per channel (8 , both channel driven, 20-20,000 Hz, no greater than 0.1% THD) Dynamic Output Power (both channel driven) : 85 watts per channel into 8 , 125 watts per channel into 4 Dynamic Headroom (8 ohms) : 1.5 dB Power Bandwidth : 5 Hz - 60,000 Hz Frequency Response : (5 Hz - 75,000 Hz; +0, - 3 dB ); (20 Hz - 2000 Hz; +0, - 0.5 dB) Signal-to-Noise Ratio : > 105 dB re Rated Power Total Harmonic Distortion (Rated Power, 8 ) : < 0,1% (20 Hz - 20 kHz) Intermodulation Distortion (Rated Power, 8 ) : < 0,1% (60 Hz :7 kHz, 4 : 1) Headphone Rated Output : 140 mW (40 ohms) Preamplifier Section Input Sensitivity /Impedance (for Rated Output) : Phono MM : 2.5 mV CD/Tape : 200 mV Video : 200 mV Maximum Input Level (1 kHz) : Phono MC (Gain; 32/24 dB): 3/8 mV Phono MM : 140 mV Total Harmonic Distortion (1 kHz, to Rec Out, at 1 V) : Phono MC : < 0.003% Phono MM : < 0.002% RIAA Deviation : 30 - 20,000 Hz 0,5 dB Signal-to-Noise Ratio (to speaker output per IHF-A-202): Phono MC : > 73 dB (32 dB gain); > 72 dB (24 dB Gain) Phono MM : > 80 dB Tone Control : Bass: 20 Hz 10 dB Treble: 20 kHz 10 dB Variable Loudness : 20 Hz +25 dB; 20 kHz +6 dB Subsonic Filter (Phono Only) : 20 Hz, -12 dB/octave FM Tuner Section Frequency Range : 87.5 - 108.0 MHz in 100 kHz steps IHF Usable Sensitivity [Mono] : 11 dBf (1.9 V) 50-dB Quieting Sensitivity [Mono/Stereo] : 14.7 dBf (3.0 V) / 37.5 dBf (41.1 V) Signal-to-Noise Ratio at 65 dBf [Mono/Stereo] : > 82 dB / > 76 dB Frequency Response : 20 Hz - 15 kHz 1 dB Total Harmonic Distortion [Mono/Stereo] : < 0.05% / < 0.07% Capture Ratio : 2.0 dB Alternate Channel Selectivity: 55 dB (400 kHz) Stereo Separation at 1 kHz : > 50 dB Spurious Response Rejection : > 90 dB Image Rejection : > 75 dB IF Rejection : > 80 dB AM Suppression : > 60 dB AM Tuner Section Frequency Range : 520 - 1710 kHz in 10kHz steps Sensitivity : 53 dB/m Signal-to-Noise Ratio (at 90 dB/m) : > 52 dB Total Harmonic Distortion (at 90 dB/m) : < 0.3% Selectivity : > 20 dB (10 kHz) General Power Source : 110, 120, 220 or 240 V AC, 50/60 Hz Power Consumption : 350 watts max Convenience Outlets : 2 x switched; 1 x unswitched Dimensions (W x H x D) : 16-15/16 x 3-15/16 x 14-9/16 Shipping to the United States only please.

Nakamichi SR-3A Stasis Stereo Receiver with CR-1A Tape Deck & CDC-200 CD Player All 3 work, tape deck is missing the eject button cover but button still works fine. Tested working by our technician. If you have any issues that were not mentioned in the listing please contact us and allow us to respond before taking any ebay actions. We will respond in a timely manor. Thanks.