Great sounding vintage cartridge. Tested.

Tonabnehmer Ortofon M20E Super. Toller Zustand, Nadel spitz, sauber und gerade. Gold Generator ! Der Verkauf erfolgt unter Ausschluss jeglicher Sachmängelhaftung. Der Verkauf erfolgt unter Ausschluss jeglicher Sachmängelhaftung.

This is the legendary Ortofon M20E Super cartridge with with new, unused, Jico replacement stylus. Connoisseurs know that this is an exceptional model, in its time this cartridge was at the very top of Ortofons offer. It is a Moving Iron cartridge, characterized by a very warm tone with lot of details. This cartridge performs extremely well with low mass tonearms. With this cartridge, in addition to the original stylus (which I dont recommend to use), you also get a new, unused Jico replacement stylus - although it is a Tonar branded, it is known that Jico produces styluses for Tonar, which can also be confirmed by a characteristic black dot on the underside of the cantilever. Specifications: -Tracking force range: 0.75-1.25g (7.5-12.5mN) -Recommended tracking force: 1.0g (10mN) -Tracking force for maximum 1% FIM distortion:1.25g (12.5mN) -Tracking angle: 20º -Type of stylus: Nude Elliptical Diamond -Stylus tip radius: 18/8µ (0.7 x0.3mil) -Equivalent stylus tip mass: 0.5mg -Output voltage per channel at 1kHz per cm/s): 0.8mV Internal impedance -DC resistance: 800? -Inductance: 600mH -Recommended load resistance: 47k? -Recommended load capacitance: 400pF -Frequency response at 1kHz: 10-25,000Hz -Channel separation at 1kHz >25dB -Channel balance at 1kHz: -Compliance: Horizontal: 40µ/mN/Vertical: 25µ/mN -Minimum tracking ability at 300Hz at recommended tracking force: 80µ MESSAGE TO POTENTIAL WORLDWIDE BUYERS: Any item you buy from me may be held by customs control so please do not complain if it would not be delivered within the period projected by eBay calculator. Current  pandemic has caused delays in delivery worldwide so please ask for estimated delivery time before placing the order or do not ask for refund if the item would not be delivered on time.

This is the legendary Ortofon M20E Super cartridge with with new, unused, Jico replacement stylus. Connoisseurs know that this is an exceptional model, in its time this cartridge was at the very top of Ortofons offer. It is a Moving Iron cartridge, characterized by a very warm tone with lot of details. This cartridge performs extremely well with low mass tonearms. With this cartridge, in addition to the original stylus (which I dont recommend to use), you also get a new, unused Jico replacement stylus - although it is a Tonar branded, it is known that Jico produces styluses for Tonar, which can also be confirmed by a characteristic black dot on the underside of the cantilever. Specifications: -Tracking force range: 0.75-1.25g (7.5-12.5mN) -Recommended tracking force: 1.0g (10mN) -Tracking force for maximum 1% FIM distortion:1.25g (12.5mN) -Tracking angle: 20º -Type of stylus: Nude Elliptical Diamond -Stylus tip radius: 18/8µ (0.7 x0.3mil) -Equivalent stylus tip mass: 0.5mg -Output voltage per channel at 1kHz per cm/s): 0.8mV Internal impedance -DC resistance: 800? -Inductance: 600mH -Recommended load resistance: 47k? -Recommended load capacitance: 400pF -Frequency response at 1kHz: 10-25,000Hz -Channel separation at 1kHz >25dB -Channel balance at 1kHz: -Compliance: Horizontal: 40µ/mN/Vertical: 25µ/mN -Minimum tracking ability at 300Hz at recommended tracking force: 80µ MESSAGE TO POTENTIAL WORLDWIDE BUYERS: Any item you buy from me may be held by customs control so please do not complain if it would not be delivered within the period projected by eBay calculator. Current  pandemic has caused delays in delivery worldwide so please ask for estimated delivery time before placing the order or do not ask for refund if the item would not be delivered on time.

This is the legendary Ortofon M20E Super cartridge with with new, unused, Jico replacement stylus. Connoisseurs know that this is an exceptional model, in its time this cartridge was at the very top of Ortofons offer. It is a Moving Iron cartridge, characterized by a very warm tone with lot of details. This cartridge performs extremely well with low mass tonearms. With this cartridge, in addition to the original stylus (which I dont recommend to use), you also get a new, unused Jico replacement stylus - although it is a Tonar branded, it is known that Jico produces styluses for Tonar, which can also be confirmed by a characteristic black dot on the underside of the cantilever. Specifications: -Tracking force range: 0.75-1.25g (7.5-12.5mN) -Recommended tracking force: 1.0g (10mN) -Tracking force for maximum 1% FIM distortion:1.25g (12.5mN) -Tracking angle: 20º -Type of stylus: Nude Elliptical Diamond -Stylus tip radius: 18/8µ (0.7 x0.3mil) -Equivalent stylus tip mass: 0.5mg -Output voltage per channel at 1kHz per cm/s): 0.8mV Internal impedance -DC resistance: 800? -Inductance: 600mH -Recommended load resistance: 47k? -Recommended load capacitance: 400pF -Frequency response at 1kHz: 10-25,000Hz -Channel separation at 1kHz >25dB -Channel balance at 1kHz: -Compliance: Horizontal: 40µ/mN/Vertical: 25µ/mN -Minimum tracking ability at 300Hz at recommended tracking force: 80µ MESSAGE TO POTENTIAL WORLDWIDE BUYERS: Any item you buy from me may be held by customs control so please do not complain if it would not be delivered within the period projected by eBay calculator. Current  pandemic has caused delays in delivery worldwide so please ask for estimated delivery time before placing the order or do not ask for refund if the item would not be delivered on time.

This is the legendary Ortofon M20E Super cartridge with with new, unused, Jico replacement stylus. Connoisseurs know that this is an exceptional model, in its time this cartridge was at the very top of Ortofons offer. It is a Moving Iron cartridge, characterized by a very warm tone with lot of details. This cartridge performs extremely well with low mass tonearms. With this cartridge, in addition to the original stylus (which I dont recommend to use), you also get a new, unused Jico replacement stylus - although it is a Tonar branded, it is known that Jico produces styluses for Tonar, which can also be confirmed by a characteristic black dot on the underside of the cantilever. Specifications: -Tracking force range: 0.75-1.25g (7.5-12.5mN) -Recommended tracking force: 1.0g (10mN) -Tracking force for maximum 1% FIM distortion:1.25g (12.5mN) -Tracking angle: 20º -Type of stylus: Nude Elliptical Diamond -Stylus tip radius: 18/8µ (0.7 x0.3mil) -Equivalent stylus tip mass: 0.5mg -Output voltage per channel at 1kHz per cm/s): 0.8mV Internal impedance -DC resistance: 800? -Inductance: 600mH -Recommended load resistance: 47k? -Recommended load capacitance: 400pF -Frequency response at 1kHz: 10-25,000Hz -Channel separation at 1kHz >25dB -Channel balance at 1kHz: -Compliance: Horizontal: 40µ/mN/Vertical: 25µ/mN -Minimum tracking ability at 300Hz at recommended tracking force: 80µ MESSAGE TO POTENTIAL WORLDWIDE BUYERS: Any item you buy from me may be held by customs control so please do not complain if it would not be delivered within the period projected by eBay calculator. Current  pandemic has caused delays in delivery worldwide so please ask for estimated delivery time before placing the order or do not ask for refund if the item would not be delivered on time.

Vintage Stylus fits Ortofon VMS 5E, 10E, 20E Mk2 , M15E Super Shipping: $3. Regular mail, no tracking

This is the legendary Ortofon M20E Super cartridge with with new, unused, Jico replacement stylus. Connoisseurs know that this is an exceptional model, in its time this cartridge was at the very top of Ortofons offer. It is a Moving Iron cartridge, characterized by a very warm tone with lot of details. This cartridge performs extremely well with low mass tonearms. With this cartridge, in addition to the original stylus (which I dont recommend to use), you also get a new, unused Jico replacement stylus - although it is a Tonar branded, it is known that Jico produces styluses for Tonar, which can also be confirmed by a characteristic black dot on the underside of the cantilever. Specifications: -Tracking force range: 0.75-1.25g (7.5-12.5mN) -Recommended tracking force: 1.0g (10mN) -Tracking force for maximum 1% FIM distortion:1.25g (12.5mN) -Tracking angle: 20º -Type of stylus: Nude Elliptical Diamond -Stylus tip radius: 18/8µ (0.7 x0.3mil) -Equivalent stylus tip mass: 0.5mg -Output voltage per channel at 1kHz per cm/s): 0.8mV Internal impedance -DC resistance: 800? -Inductance: 600mH -Recommended load resistance: 47k? -Recommended load capacitance: 400pF -Frequency response at 1kHz: 10-25,000Hz -Channel separation at 1kHz >25dB -Channel balance at 1kHz: -Compliance: Horizontal: 40µ/mN/Vertical: 25µ/mN -Minimum tracking ability at 300Hz at recommended tracking force: 80µ MESSAGE TO POTENTIAL WORLDWIDE BUYERS: Any item you buy from me may be held by customs control so please do not complain if it would not be delivered within the period projected by eBay calculator. Current  pandemic has caused delays in delivery worldwide so please ask for estimated delivery time before placing the order or do not ask for refund if the item would not be delivered on time.

ORTOFON M20E SUPER Up for sale is this time warp example of this classic moving magnet cartridge. Included in the sale: Ortofon M20E Super cartridge, Original Stylus, Cap 210, Packaging & 1982 Receipt!NOS, Immaculate cartridge - never played. The M20E Super has a high - compliance stylus assembly fitted with an elliptical nude diamond having radii of 0.3 x 0.7 mils. It operates at tracking forces between 0.75 and 1.25 grams, with 1 gram being the nominal rated tracking force. This cartridge is meant for use in low - mass tone arms, since its high lateral compliance of 40 x 10-6 cm/dyne could result in an undesirably low resonance frequency in a more massive arm. The M20E is rated to deliver 0.8 millivolt per channel at 1,000 Hz for a recorded velocity of 1 centimeter per second (cm/sec). The stylus has a nominal 20 -degree vertical -tracking angle and an effective mass of 0.5 milligram. The weight of the cartridge is 5 grams. Ortofon cartridges are designed to give their flattest frequency response when loaded by 47,000 ohms in parallel with 400 picofarads (pF) of capacitance. U.K. postage: 5.00 TRACKED AND INSUREDRest of World: Global Shipping. Bid with confidence, feel free to check out my feedback and other listings.

ORTOFON M20E SUPER Up for sale is this time warp example of this classic moving magnet cartridge. Included in the sale: Ortofon M20E Super cartridge, Original Stylus, Cap 210, Packaging & 1982 Receipt!NOS, Immaculate cartridge - never played. The M20E Super has a high - compliance stylus assembly fitted with an elliptical nude diamond having radii of 0.3 x 0.7 mils. It operates at tracking forces between 0.75 and 1.25 grams, with 1 gram being the nominal rated tracking force. This cartridge is meant for use in low - mass tone arms, since its high lateral compliance of 40 x 10-6 cm/dyne could result in an undesirably low resonance frequency in a more massive arm. The M20E is rated to deliver 0.8 millivolt per channel at 1,000 Hz for a recorded velocity of 1 centimeter per second (cm/sec). The stylus has a nominal 20 -degree vertical -tracking angle and an effective mass of 0.5 milligram. The weight of the cartridge is 5 grams. Ortofon cartridges are designed to give their flattest frequency response when loaded by 47,000 ohms in parallel with 400 picofarads (pF) of capacitance. U.K. postage: 5.00 TRACKED AND INSUREDRest of World: Global Shipping. Bid with confidence, feel free to check out my feedback and other listings.

This is the legendary Ortofon M20E Super cartridge with with new, unused, Jico replacement stylus. Connoisseurs know that this is an exceptional model, in its time this cartridge was at the very top of Ortofons offer. It is a Moving Iron cartridge, characterized by a very warm tone with lot of details. This cartridge performs extremely well with low mass tonearms. With this cartridge, in addition to the original stylus (which I dont recommend to use), you also get a new, unused Jico replacement stylus - although it is a Tonar branded, it is known that Jico produces styluses for Tonar, which can also be confirmed by a characteristic black dot on the underside of the cantilever. Specifications: -Tracking force range: 0.75-1.25g (7.5-12.5mN) -Recommended tracking force: 1.0g (10mN) -Tracking force for maximum 1% FIM distortion:1.25g (12.5mN) -Tracking angle: 20º -Type of stylus: Nude Elliptical Diamond -Stylus tip radius: 18/8µ (0.7 x0.3mil) -Equivalent stylus tip mass: 0.5mg -Output voltage per channel at 1kHz per cm/s): 0.8mV Internal impedance -DC resistance: 800? -Inductance: 600mH -Recommended load resistance: 47k? -Recommended load capacitance: 400pF -Frequency response at 1kHz: 10-25,000Hz -Channel separation at 1kHz >25dB -Channel balance at 1kHz: -Compliance: Horizontal: 40µ/mN/Vertical: 25µ/mN -Minimum tracking ability at 300Hz at recommended tracking force: 80µ MESSAGE TO POTENTIAL WORLDWIDE BUYERS: Any item you buy from me may be held by customs control so please do not complain if it would not be delivered within the period projected by eBay calculator. Current  pandemic has caused delays in delivery worldwide so please ask for estimated delivery time before placing the order or do not ask for refund if the item would not be delivered on time.