Pioneer PL-15C internal switch Pulled from machine. Condition is Used. Shipped with USPS First Class Package.

Pioneer PL-15C base plate springs Pulled from machine. Springs have rust on them. Condition is Used. Shipped with USPS First Class Package.

Pioneer PL-15C Face plate from up / down switch Pulled from machine. Condition is Used. Shipped with USPS First Class Package.

Kein Versand. No Shipping. Nur Abholung. O.g. Plattenspieler- Teildefekt. Automatik soll eingestellt werden, bzw. repariert, so wie Schalter für Geschwindigkeit von Umdrehungen...Sonst ist das Gerät funktionsfähig! Das Teil hat DIN-Anschluss für Audio! Haube hat Risse ( Versand-Folge).Unverschämte Angebote werden ignoriert.P.S. Info für potenziellen Käufer: was kostet Ersatznadel für Shure M75-6S, oder o.g. Tonabnehmer von Shure, bzw. ganze Tonarm für PL-15C (klar- gebraucht)?! Techn. Daten: https://www.radiomuseum.org/r/pioneer_pl_15c.html Kein Versand. No Shipping. Abholung in Hamburg-Eimsbüttel.Am 03.11.23 hat der Verkäufer die folgenden Angaben hinzugefügt: Kein Versand. No Shipping. Nur Abholung. O.g. Plattenspieler- Teildefekt. Automatik soll eingestellt werden, bzw. repariert, so wie Schalter fr Geschwindigkeit von Umdrehungen... Sonst ist das Gert funktionsfhig! Mit Shure- Tonabnehmer. Das Teil hat DIN-Anschluss fr Audio! Haube hat Risse ( Versand-Folge). Unverschmte Angebote werden ignoriert. P.S. Info fr potenziellen Kufer: was kostet Ersatznadel fr Shure M75-6S, oder o.g. Tonabnehmer von Shure, bzw. ganze Tonarm fr PL-15C (klar- gebraucht)?! Techn. Daten: https://www.radiomuseum.org/r/pioneer_pl_15c.html Kein Versand. No Shipping. Abholung in Hamburg-Eimsbttel

Kein Versand. No Shipping. O.g. Plattenspieler- TEILDEFEKT. Automatik soll eingestellt werden so wie Schalter fr Geschwindigkeit von Umdrehungen... Sonst ist Gert funktionsfhig! DIN-Anschlu fr Audio! Nur Abholung in Hamburg. Haube hat Risse ( Versand-Folge). Techn. Daten: https://www.radiomuseum.org/r/pioneer_pl_15c.html Kein Versand. No Shippin

Pioneer PL-15C 33 / 45 switch plate cover Pulled from machine. Condition is Used. Shipped with USPS First Class Package.

Bias weight (Anti skate) for Pioneer PL-15 and PL15C. Aluminum weight for lower tracking force see note below. ** NOTE. There are two anti skate weights provided with the Pioneer PL-15 / 15C. One lighter Alloy for lower tracking forces and a Brass one for tracking forces > 2.1g. This is the lighter alloy weight weight used if your cartridge tracking force is set to 2.0g or less. If your tracking force is higher than 2.0g you need the Brass version of the anti skate weight. I have this in another listing as well as a listing for both versions. ** This anti skate weight is made as a close replica of the original. It is made to the correct mass value required but it my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the anti skate weight and its monofilament line only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and I will supply extra lines if you feel you might need them for free on request. *

Bias weight (Anti skate) for Pioneer PL-15 and PL15C. Heavier Brass version of weight for cartridge tracking forces above 2.1g. See note below. ** NOTE. There are two anti skate weights provided with the Pioneer PL-15 / 15C. One lighter Alloy for lower tracking forces and a Brass one for tracking forces > 2.1g. This is the heavier Brass weight used if your cartridge tracking force is set to 2.1g or more. If your tracking force is less than 2.1g you need the lighter Alloy version of the anti skate weight. I have this in another listing as well as a listing for both versions. ** This anti skate weight is made as a close replica of the original. It is made to the correct mass value required but it my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the anti skate weight and its monofilament line only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and I will supply extra lines if you feel you might need them for free on request. *

Pioneer PL-15C base plate springs Pulled from machine. Springs have rust on them. Condition is Used. Shipped with USPS First Class Package.

Pioneer PL-15C internal switch Pulled from machine. Condition is Used. Shipped with USPS First Class Package.

Pioneer PL-15C Face plate from up / down switch Pulled from machine. Condition is Used. Shipped with USPS First Class Package.

Pioneer PL-15C 33 / 45 switch plate cover Pulled from machine. Condition is Used. Shipped with USPS First Class Package.

BELT FOR TURNTABLEFOR PIONEER PIONEER TURNTABLE PL-15D PL15D PL-15CSuperior quality QUICK SHIPPING IN FOLLOWED LETTER BELT FOR TURNTABLE FOR PIONEER PIONEER TURNTABLE PL-15D PL15D PL-15C Superior quality QUICK SHIPPING IN FOLLOWED LETTER BELT FOR TURNTABLE FOR PIONEER PIONEER TURNTABLE PL-15D PL15D PL-15C Superior quality QUICK SHIPPING IN FOLLOWED LETTER

COURROIE POUR PLATINE DISQUE VINYLEPOUR PLATINE PIONEER PIONEER PL-15D PL15D PL-15CQualité supérieure ENVOI RAPIDE EN LETTRE SUIVIE COURROIE POUR PLATINE DISQUE VINYLE POUR PLATINE PIONEER PIONEER PL-15D PL15D PL-15C Qualité supérieure ENVOI RAPIDE EN LETTRE SUIVIE COURROIE POUR PLATINE DISQUE VINYLE POUR PLATINE PIONEER PIONEER PL-15D PL15D PL-15C Qualité supérieure ENVOI RAPIDE EN LETTRE SUIVIE

GÜRTEL FÜR PLATTENSPIELERFÜR PIONEER PIONEER PLATTENSPIELER PL-15D PL15D PL-15CGehobene Qualität SCHNELLER VERSAND IM FOLGENDEN SCHREIBEN GÜRTEL FÜR PLATTENSPIELER FÜR PIONEER PIONEER PLATTENSPIELER PL-15D PL15D PL-15C Gehobene Qualität SCHNELLER VERSAND IM FOLGENDEN SCHREIBEN GÜRTEL FÜR PLATTENSPIELER FÜR PIONEER PIONEER PLATTENSPIELER PL-15D PL15D PL-15C Gehobene Qualität SCHNELLER VERSAND IM FOLGENDEN SCHREIBEN

Bias weight (Anti skate) for Pioneer PL-15 and PL15C. Heavier Brass version of weight for cartridge tracking forces above 2.1g. See note below. ** NOTE. There are two anti skate weights provided with the Pioneer PL-15 / 15C. One lighter Alloy for lower tracking forces and a Brass one for tracking forces > 2.1g. This is the heavier Brass weight used if your cartridge tracking force is set to 2.1g or more. If your tracking force is less than 2.1g you need the lighter Alloy version of the anti skate weight. I have this in another listing as well as a listing for both versions. ** This anti skate weight is made as a close replica of the original. It is made to the correct mass value required but it my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the anti skate weight and its monofilament line only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and I will supply extra lines if you feel you might need them for free on request. *

Bias weight (Anti skate) for Pioneer PL-15 and PL15C. Aluminum weight for lower tracking force see note below. ** NOTE. There are two anti skate weights provided with the Pioneer PL-15 / 15C. One lighter Alloy for lower tracking forces and a Brass one for tracking forces > 2.1g. This is the lighter alloy weight weight used if your cartridge tracking force is set to 2.0g or less. If your tracking force is higher than 2.0g you need the Brass version of the anti skate weight. I have this in another listing as well as a listing for both versions. ** This anti skate weight is made as a close replica of the original. It is made to the correct mass value required but it my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the anti skate weight and its monofilament line only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and I will supply extra lines if you feel you might need them for free on request. *

Bias weight (Anti skate) for Pioneer PL-15 and PL15C. Heavier Brass version of weight for cartridge tracking forces above 2.1g. See note below. ** NOTE. There are two anti skate weights provided with the Pioneer PL-15 / 15C. One lighter Alloy for lower tracking forces and a Brass one for tracking forces > 2.1g. This is the heavier Brass weight used if your cartridge tracking force is set to 2.1g or more. If your tracking force is less than 2.1g you need the lighter Alloy version of the anti skate weight. I have this in another listing as well as a listing for both versions. ** This anti skate weight is made as a close replica of the original. It is made to the correct mass value required but it my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the anti skate weight and its monofilament line only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and I will supply extra lines if you feel you might need them for free on request. *

Bias weight (Anti skate) for Pioneer PL-15 and PL15C. Aluminum weight for lower tracking force see note below. ** NOTE. There are two anti skate weights provided with the Pioneer PL-15 / 15C. One lighter Alloy for lower tracking forces and a Brass one for tracking forces > 2.1g. This is the lighter alloy weight weight used if your cartridge tracking force is set to 2.0g or less. If your tracking force is higher than 2.0g you need the Brass version of the anti skate weight. I have this in another listing as well as a listing for both versions. ** This anti skate weight is made as a close replica of the original. It is made to the correct mass value required but it my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the anti skate weight and its monofilament line only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and I will supply extra lines if you feel you might need them for free on request. *

Bias weight (Anti skate) for Pioneer PL-15 and PL15C. Aluminum weight for lower tracking force see note below. ** NOTE. There are two anti skate weights provided with the Pioneer PL-15 / 15C. One lighter Alloy for lower tracking forces and a Brass one for tracking forces > 2.1g. This is the lighter alloy weight weight used if your cartridge tracking force is set to 2.0g or less. If your tracking force is higher than 2.0g you need the Brass version of the anti skate weight. I have this in another listing as well as a listing for both versions. ** This anti skate weight is made as a close replica of the original. It is made to the correct mass value required but it my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the anti skate weight and its monofilament line only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and I will supply extra lines if you feel you might need them for free on request. *

Bias weight (Anti skate) for Pioneer PL-15 and PL15C. Heavier Brass version of weight for cartridge tracking forces above 2.1g. See note below. ** NOTE. There are two anti skate weights provided with the Pioneer PL-15 / 15C. One lighter Alloy for lower tracking forces and a Brass one for tracking forces > 2.1g. This is the heavier Brass weight used if your cartridge tracking force is set to 2.1g or more. If your tracking force is less than 2.1g you need the lighter Alloy version of the anti skate weight. I have this in another listing as well as a listing for both versions. ** This anti skate weight is made as a close replica of the original. It is made to the correct mass value required but it my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the anti skate weight and its monofilament line only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and I will supply extra lines if you feel you might need them for free on request. *