A30.1 FEATURES Primare 30.1 is more of a straightforward and simple amplifier design. It does not have any tone controls nor the balance control knob on the front facia. That is because the volume control is a very high precision unit that not only maintains excellent balance between channels at any volume, but increases or decreases the volume in very small increments, an excellent feature especially if the speakers have high efficiency drivers. The front facia has two very small round windows on either side of the volume knob at about 5 and 7 o’clock position. One gives you the indication of the volume level (0-79) and the other is the window for receiving remote signals. There are in all three solid looking rotary knobs, appear to be extruded aluminium and in single piece, dead centre on the facia is the volume knob, to the right is Stand-by knob and to the left source selector. On the right of the volume knob is the phase toggle button (0/180 Deg), to the left of the volume knob is the monitor button (tape selector). The three large knobs are rotary in the truest sense of the word; they continue to rotate in either direction freely having no detents or markings giving a very clean look. The back of the amplifier has 6 line level inputs, 2 XLR inputs, speaker terminals and pre-outs to the extreme left and right respectively, detachable three prong AC plug socket and a sole ground terminal.

A30.1 FEATURES  Primare 30.1 is more of a straightforward and simple amplifier design. It does not have any tone controls nor the balance control knob on the front facia. That is because the volume control is a very high precision unit that not only maintains excellent balance between channels at any volume, but increases or decreases the volume in very small increments, an excellent feature especially if the speakers have high efficiency drivers. The front facia has two very small round windows on either side of the volume knob at about 5 and 7 o’clock position. One gives you the indication of the volume level (0-79) and the other is the window for receiving remote signals. There are in all three solid looking rotary knobs, appear to be extruded aluminium and in single piece, dead centre on the facia is the volume knob, to the right is Stand-by knob and to the left source selector. On the right of the volume knob is the phase toggle button (0/180 Deg), to the left of the volume knob is the monitor button (tape selector). The three large knobs are rotary in the truest sense of the word; they continue to rotate in either direction freely having no detents or markings giving a very clean look. The back of the amplifier has 6 line level inputs, 2 XLR inputs, speaker terminals and pre-outs to the extreme left and right respectively, detachable three prong AC plug socket and a sole ground terminal.

A30.1 FEATURES  Primare 30.1 is more of a straightforward and simple amplifier design. It does not have any tone controls nor the balance control knob on the front facia. That is because the volume control is a very high precision unit that not only maintains excellent balance between channels at any volume, but increases or decreases the volume in very small increments, an excellent feature especially if the speakers have high efficiency drivers. The front facia has two very small round windows on either side of the volume knob at about 5 and 7 o’clock position. One gives you the indication of the volume level (0-79) and the other is the window for receiving remote signals. There are in all three solid looking rotary knobs, appear to be extruded aluminium and in single piece, dead centre on the facia is the volume knob, to the right is Stand-by knob and to the left source selector. On the right of the volume knob is the phase toggle button (0/180 Deg), to the left of the volume knob is the monitor button (tape selector). The three large knobs are rotary in the truest sense of the word; they continue to rotate in either direction freely having no detents or markings giving a very clean look. The back of the amplifier has 6 line level inputs, 2 XLR inputs, speaker terminals and pre-outs to the extreme left and right respectively, detachable three prong AC plug socket and a sole ground terminal.

A30.1 FEATURES  Primare 30.1 is more of a straightforward and simple amplifier design. It does not have any tone controls nor the balance control knob on the front facia. That is because the volume control is a very high precision unit that not only maintains excellent balance between channels at any volume, but increases or decreases the volume in very small increments, an excellent feature especially if the speakers have high efficiency drivers. The front facia has two very small round windows on either side of the volume knob at about 5 and 7 o’clock position. One gives you the indication of the volume level (0-79) and the other is the window for receiving remote signals. There are in all three solid looking rotary knobs, appear to be extruded aluminium and in single piece, dead centre on the facia is the volume knob, to the right is Stand-by knob and to the left source selector. On the right of the volume knob is the phase toggle button (0/180 Deg), to the left of the volume knob is the monitor button (tape selector). The three large knobs are rotary in the truest sense of the word; they continue to rotate in either direction freely having no detents or markings giving a very clean look. The back of the amplifier has 6 line level inputs, 2 XLR inputs, speaker terminals and pre-outs to the extreme left and right respectively, detachable three prong AC plug socket and a sole ground terminal.