HiFimeDIY UX1 ES9023 USB DAC+SPDIF/USB converter — Open Box Item — New and mint HiFimeDIY UX1 USB DAC (Sabre ES9023) + USB to SPDIF and SPDIF to USB converter This is a very nice small DAC powered by USB bus and with many useful additional features. In addition to the normal USB digital to analog audio conversion this DAC can send a SPDIF optical input to USB. And it can send a digital audio signal from a computer via USB to the SPDIF output. Please note: It does not do SPDIF to analog! It is powered from USB and doesn’t require external power supply. It has a digital volume control which will adjust the main volume level on the computer. The DAC chip is the famous Sabre ES9023 which has advanced jitter eliminator and are used in several of our other popular dacs. The headphone output is buffered by Texas Instruments’ TPA6120 current feedback power amplifier. Analoge outputs: It has two analog outputs using 3.5mm connectors. The one on the front is buffered by a headphone amplifier (TPA6120). The output on the back is direct output from the ES9023 chip. Both are controlled by the digital volume potmeter. Line output power is 2Vrms and headphone output is 250mW to 16ohm. Headphone output impedance is 10ohm Digital output: SPDIF digital output. The USB input signal is sent out through the SPDIF output. Digital input: SPDIF digital input is sent over USB to computer. Note: The SPDIF input is not sent to analog output! Input is 48kHz 16bit max. USB input: Works without drivers on Mac, Windows and Linux computer and accepts 32, 44, 48. 88 and 96 kHz sample rates and 16/24 bit. Led lights are indicating sample rate. Specifications: •Self powered from USB •Digital volume control •USB input: 32,44,48,88,96kHz,16/24bit. Sample rate indicated by LED lights •SPDIF input: 32,44,48kHz, 16 bit. •Audiophile Sabre ES9023 USB chip •Two analog outputs: One direct from the DAC chip and one buffered by headphone amp •USB adaptive transfer mode. DAC async mode with TXC 1ps oscillator •Weight 110g •Dimensions: Width 70mm, height 25mm, depth 65mm (85mm with volume knob and screws)

HiFimeDIY UX1 ES9023 USB DAC+SPDIF/USB converter — Open Box Item — New and mint HiFimeDIY UX1 USB DAC (Sabre ES9023) + USB to SPDIF and SPDIF to USB converter This is a very nice small DAC powered by USB bus and with many useful additional features. In addition to the normal USB digital to analog audio conversion this DAC can send a SPDIF optical input to USB. And it can send a digital audio signal from a computer via USB to the SPDIF output. Please note: It does not do SPDIF to analog! It is powered from USB and doesn’t require external power supply. It has a digital volume control which will adjust the main volume level on the computer. The DAC chip is the famous Sabre ES9023 which has advanced jitter eliminator and are used in several of our other popular dacs. The headphone output is buffered by Texas Instruments’ TPA6120 current feedback power amplifier. Analoge outputs: It has two analog outputs using 3.5mm connectors. The one on the front is buffered by a headphone amplifier (TPA6120). The output on the back is direct output from the ES9023 chip. Both are controlled by the digital volume potmeter. Line output power is 2Vrms and headphone output is 250mW to 16ohm. Headphone output impedance is 10ohm Digital output: SPDIF digital output. The USB input signal is sent out through the SPDIF output. Digital input: SPDIF digital input is sent over USB to computer. Note: The SPDIF input is not sent to analog output! Input is 48kHz 16bit max. USB input: Works without drivers on Mac, Windows and Linux computer and accepts 32, 44, 48. 88 and 96 kHz sample rates and 16/24 bit. Led lights are indicating sample rate. Specifications: •Self powered from USB •Digital volume control •USB input: 32,44,48,88,96kHz,16/24bit. Sample rate indicated by LED lights •SPDIF input: 32,44,48kHz, 16 bit. •Audiophile Sabre ES9023 USB chip •Two analog outputs: One direct from the DAC chip and one buffered by headphone amp •USB adaptive transfer mode. DAC async mode with TXC 1ps oscillator •Weight 110g •Dimensions: Width 70mm, height 25mm, depth 65mm (85mm with volume knob and screws)

HiFimeDIY UX1 ES9023 USB DAC+SPDIF/USB converter — Open Box Item — New and mint HiFimeDIY UX1 USB DAC (Sabre ES9023) + USB to SPDIF and SPDIF to USB converter This is a very nice small DAC powered by USB bus and with many useful additional features. In addition to the normal USB digital to analog audio conversion this DAC can send a SPDIF optical input to USB. And it can send a digital audio signal from a computer via USB to the SPDIF output. Please note: It does not do SPDIF to analog! It is powered from USB and doesn’t require external power supply. It has a digital volume control which will adjust the main volume level on the computer. The DAC chip is the famous Sabre ES9023 which has advanced jitter eliminator and are used in several of our other popular dacs. The headphone output is buffered by Texas Instruments’ TPA6120 current feedback power amplifier. Analoge outputs: It has two analog outputs using 3.5mm connectors. The one on the front is buffered by a headphone amplifier (TPA6120). The output on the back is direct output from the ES9023 chip. Both are controlled by the digital volume potmeter. Line output power is 2Vrms and headphone output is 250mW to 16ohm. Headphone output impedance is 10ohm Digital output: SPDIF digital output. The USB input signal is sent out through the SPDIF output. Digital input: SPDIF digital input is sent over USB to computer. Note: The SPDIF input is not sent to analog output! Input is 48kHz 16bit max. USB input: Works without drivers on Mac, Windows and Linux computer and accepts 32, 44, 48. 88 and 96 kHz sample rates and 16/24 bit. Led lights are indicating sample rate. Specifications: •Self powered from USB •Digital volume control •USB input: 32,44,48,88,96kHz,16/24bit. Sample rate indicated by LED lights •SPDIF input: 32,44,48kHz, 16 bit. •Audiophile Sabre ES9023 USB chip •Two analog outputs: One direct from the DAC chip and one buffered by headphone amp •USB adaptive transfer mode. DAC async mode with TXC 1ps oscillator •Weight 110g •Dimensions: Width 70mm, height 25mm, depth 65mm (85mm with volume knob and screws)

HiFimeDIY UX1 ES9023 USB DAC+SPDIF/USB converter — Open Box Item — New and mint HiFimeDIY UX1 USB DAC (Sabre ES9023) + USB to SPDIF and SPDIF to USB converter This is a very nice small DAC powered by USB bus and with many useful additional features. In addition to the normal USB digital to analog audio conversion this DAC can send a SPDIF optical input to USB. And it can send a digital audio signal from a computer via USB to the SPDIF output. Please note: It does not do SPDIF to analog! It is powered from USB and doesn’t require external power supply. It has a digital volume control which will adjust the main volume level on the computer. The DAC chip is the famous Sabre ES9023 which has advanced jitter eliminator and are used in several of our other popular dacs. The headphone output is buffered by Texas Instruments’ TPA6120 current feedback power amplifier. Analoge outputs: It has two analog outputs using 3.5mm connectors. The one on the front is buffered by a headphone amplifier (TPA6120). The output on the back is direct output from the ES9023 chip. Both are controlled by the digital volume potmeter. Line output power is 2Vrms and headphone output is 250mW to 16ohm. Headphone output impedance is 10ohm Digital output: SPDIF digital output. The USB input signal is sent out through the SPDIF output. Digital input: SPDIF digital input is sent over USB to computer. Note: The SPDIF input is not sent to analog output! Input is 48kHz 16bit max. USB input: Works without drivers on Mac, Windows and Linux computer and accepts 32, 44, 48. 88 and 96 kHz sample rates and 16/24 bit. Led lights are indicating sample rate. Specifications: •Self powered from USB •Digital volume control •USB input: 32,44,48,88,96kHz,16/24bit. Sample rate indicated by LED lights •SPDIF input: 32,44,48kHz, 16 bit. •Audiophile Sabre ES9023 USB chip •Two analog outputs: One direct from the DAC chip and one buffered by headphone amp •USB adaptive transfer mode. DAC async mode with TXC 1ps oscillator •Weight 110g •Dimensions: Width 70mm, height 25mm, depth 65mm (85mm with volume knob and screws)

HiFimeDIY UX1 ES9023 USB DAC+SPDIF/USB converter — Open Box Item — New and mint HiFimeDIY UX1 USB DAC (Sabre ES9023) + USB to SPDIF and SPDIF to USB converter This is a very nice small DAC powered by USB bus and with many useful additional features. In addition to the normal USB digital to analog audio conversion this DAC can send a SPDIF optical input to USB. And it can send a digital audio signal from a computer via USB to the SPDIF output. Please note: It does not do SPDIF to analog! It is powered from USB and doesn’t require external power supply. It has a digital volume control which will adjust the main volume level on the computer. The DAC chip is the famous Sabre ES9023 which has advanced jitter eliminator and are used in several of our other popular dacs. The headphone output is buffered by Texas Instruments’ TPA6120 current feedback power amplifier. Analoge outputs: It has two analog outputs using 3.5mm connectors. The one on the front is buffered by a headphone amplifier (TPA6120). The output on the back is direct output from the ES9023 chip. Both are controlled by the digital volume potmeter. Line output power is 2Vrms and headphone output is 250mW to 16ohm. Headphone output impedance is 10ohm Digital output: SPDIF digital output. The USB input signal is sent out through the SPDIF output. Digital input: SPDIF digital input is sent over USB to computer. Note: The SPDIF input is not sent to analog output! Input is 48kHz 16bit max. USB input: Works without drivers on Mac, Windows and Linux computer and accepts 32, 44, 48. 88 and 96 kHz sample rates and 16/24 bit. Led lights are indicating sample rate. Specifications: •Self powered from USB •Digital volume control •USB input: 32,44,48,88,96kHz,16/24bit. Sample rate indicated by LED lights •SPDIF input: 32,44,48kHz, 16 bit. •Audiophile Sabre ES9023 USB chip •Two analog outputs: One direct from the DAC chip and one buffered by headphone amp •USB adaptive transfer mode. DAC async mode with TXC 1ps oscillator •Weight 110g •Dimensions: Width 70mm, height 25mm, depth 65mm (85mm with volume knob and screws)

HiFimeDIY UX1 ES9023 USB DAC+SPDIF/USB converter — Open Box Item — New and mint HiFimeDIY UX1 USB DAC (Sabre ES9023) + USB to SPDIF and SPDIF to USB converter This is a very nice small DAC powered by USB bus and with many useful additional features. In addition to the normal USB digital to analog audio conversion this DAC can send a SPDIF optical input to USB. And it can send a digital audio signal from a computer via USB to the SPDIF output. Please note: It does not do SPDIF to analog! It is powered from USB and doesn’t require external power supply. It has a digital volume control which will adjust the main volume level on the computer. The DAC chip is the famous Sabre ES9023 which has advanced jitter eliminator and are used in several of our other popular dacs. The headphone output is buffered by Texas Instruments’ TPA6120 current feedback power amplifier. Analoge outputs: It has two analog outputs using 3.5mm connectors. The one on the front is buffered by a headphone amplifier (TPA6120). The output on the back is direct output from the ES9023 chip. Both are controlled by the digital volume potmeter. Line output power is 2Vrms and headphone output is 250mW to 16ohm. Headphone output impedance is 10ohm Digital output: SPDIF digital output. The USB input signal is sent out through the SPDIF output. Digital input: SPDIF digital input is sent over USB to computer. Note: The SPDIF input is not sent to analog output! Input is 48kHz 16bit max. USB input: Works without drivers on Mac, Windows and Linux computer and accepts 32, 44, 48. 88 and 96 kHz sample rates and 16/24 bit. Led lights are indicating sample rate. Specifications: •Self powered from USB •Digital volume control •USB input: 32,44,48,88,96kHz,16/24bit. Sample rate indicated by LED lights •SPDIF input: 32,44,48kHz, 16 bit. •Audiophile Sabre ES9023 USB chip •Two analog outputs: One direct from the DAC chip and one buffered by headphone amp •USB adaptive transfer mode. DAC async mode with TXC 1ps oscillator •Weight 110g •Dimensions: Width 70mm, height 25mm, depth 65mm (85mm with volume knob and screws)

Das Gerät ist einsatzbereit, sie müssen es nur noch ein einschalten.Installiert ist Rune Audio, es funktioniert einwandfrei. Geliefert:1x Audiophonics RaspTouch inlusive I-Sabre V3 DAC ES9023,Raspberry Pi, 7“ Touch Display, Netzteil Es gibt zahlreiche andere Softwarelösungen, die installiert werden können und all Ihre Erwartungen erfüllen: Volumio, piCorePlayer, MoOde Audio, Max2Play, RoPieee,Rune AudioRoon Ready... Je nach gewählter Software können Sie auf die folgenden Funktionen zugreifen: Volle und unbegrenzte Multiroom-UnterstützungFernwiedergabe von Audiodateien, die auf einem mit dem Netzwerk verbundenen Medienserver (NAS) gespeichert sindFernablesen von einer UPnP-QuelleLesen von einer USB-Quelle (Festplatte, USB-Stick)Verwaltung des DLNA-ProtokollsQobuz-UnterstützungAirPlay-UnterstützungRoon Bridge Ronn Ready Anschlussmöglichkeiten Der RaspTouch I-sabre 9023 V3 bietet ein einfaches und effizientes Anschlusssystem, mit dem Sie Ihr Audiosystem in vollen Zügen genießen können. So finden wir die Konnektivität des Raspberry Pi mit 4 USB-A 2.0 Ports, einem Micro SD Port, einem Ethernet Port und einem Remote HDMI Ausgang. Der analoge Audioausgang erfolgt über RCA Stereo. 7? Touch Display Der RaspTouch wird mit einem Netzteil geliefert, das an den 5,5/2,1-mm-Gleichstromanschluss auf der Rückseite des Geräts angeschlossen wird. Der Netzschalter an der Seite ermöglicht es Ihnen, das Gerät sauber auszuschalten, indem Sie das System ausschalten, bevor Sie den Strom abschalten. Der DAC Der RaspTouch basiert auf einem ESS ES9023 DAC, der die HyperStream-Architektur integriert und Abtastraten von bis zu 24bit 192kHz umsetzen kann, und bietet eine sehr gute Klangleistung. Der DAC ES9023 profitiert von fortschrittlichen Technologien und einem sorgfältigen Design, das es ihm ermöglicht, exzellente Werte wie einen Dynamikbereich von 112 dB zu erreichen. Seine hochpräzisen TCXO-Takte mit 0,5ppm und die patentierte Jitter-Reduktions-Technologie sorgen für einen besonders niedrigen Jitter-Wert. Präzisionsuhr: 0,5ppm TCXO Ultra-Low-JitterGold-überzogenen RCA-KonnektorenDC-Eingang 5,5 / 2,1 mmFull-HD-Audio – bis zu 24 Bit/192 kHz-WiedergabeDer I-Sabre V3 von Audiophonics ist ein sehr hochqualitativer DAC, der auf dem ES9023b Digital-zu-Analog Konverter Chip basiert, welcher sich bereits in der dritten Generation befindet. Der DAC wird einfach auf den Raspberry Pi aufgesteckt, somit ist kein Löten erforderlich.Dieser DAC macht vieles anders: So hat der I-Sabre einen temperaturkompensierten Oszillator mit an Board, sitzt etwas höher auf dem Raspberry Pi, so dass sich alle wichtigen Ausgänge auf der selben Seite befinden. Wie auch die DC-Buchse für den Sabre, denn der Sabre ist der erste DAC in unserem Sortiment, der eine eigene Stromzufuhr benötigt. Sobald er mit einer eigenen Stromzufuhr betrieben wird, kann er auch andere Geräte mit Strom versorgen. SPECIFICATIONS Product type Streamer Inputs 4x USB-A 1x Micro SD slot 1x RJ45 1x Stereo RCA 1x HDMI 2x 12VDC 1.25A Raspberry Pi - DAC Module Audiophonics I-Sabre V3 ES9023TCXO Screen Tactile 7 Official Raspberry Pi screen Supported sampling rate PCM up to 24bit 192kHz Dynamic range 112dB GENERAL Power supply 6V 3A via Jack DC 5.5/2.1mm (power supply) Housing material Aluminium Dimensions 200 x 95 x 230mm Rear dimensions 175 x 55mm Weight 0.9kg Color Black _gsrx_vers_1536 (GS 9.4 (1536))

Das Gerät ist einsatzbereit, sie müssen es nur noch ein einschalten.Installiert ist Rune Audio, es funktioniert einwandfrei. Geliefert:1x Audiophonics RaspTouch inlusive I-Sabre V3 DAC ES9023,Raspberry Pi, 7“ Touch Display, Netzteil Es gibt zahlreiche andere Softwarelösungen, die installiert werden können und all Ihre Erwartungen erfüllen: Volumio, piCorePlayer, MoOde Audio, Max2Play, RoPieee,Rune AudioRoon Ready... Je nach gewählter Software können Sie auf die folgenden Funktionen zugreifen: Volle und unbegrenzte Multiroom-UnterstützungFernwiedergabe von Audiodateien, die auf einem mit dem Netzwerk verbundenen Medienserver (NAS) gespeichert sindFernablesen von einer UPnP-QuelleLesen von einer USB-Quelle (Festplatte, USB-Stick)Verwaltung des DLNA-ProtokollsQobuz-UnterstützungAirPlay-UnterstützungRoon Bridge Ronn Ready Anschlussmöglichkeiten Der RaspTouch I-sabre 9023 V3 bietet ein einfaches und effizientes Anschlusssystem, mit dem Sie Ihr Audiosystem in vollen Zügen genießen können. So finden wir die Konnektivität des Raspberry Pi mit 4 USB-A 2.0 Ports, einem Micro SD Port, einem Ethernet Port und einem Remote HDMI Ausgang. Der analoge Audioausgang erfolgt über RCA Stereo. 7? Touch Display Der RaspTouch wird mit einem Netzteil geliefert, das an den 5,5/2,1-mm-Gleichstromanschluss auf der Rückseite des Geräts angeschlossen wird. Der Netzschalter an der Seite ermöglicht es Ihnen, das Gerät sauber auszuschalten, indem Sie das System ausschalten, bevor Sie den Strom abschalten. Der DAC Der RaspTouch basiert auf einem ESS ES9023 DAC, der die HyperStream-Architektur integriert und Abtastraten von bis zu 24bit 192kHz umsetzen kann, und bietet eine sehr gute Klangleistung. Der DAC ES9023 profitiert von fortschrittlichen Technologien und einem sorgfältigen Design, das es ihm ermöglicht, exzellente Werte wie einen Dynamikbereich von 112 dB zu erreichen. Seine hochpräzisen TCXO-Takte mit 0,5ppm und die patentierte Jitter-Reduktions-Technologie sorgen für einen besonders niedrigen Jitter-Wert. Präzisionsuhr: 0,5ppm TCXO Ultra-Low-JitterGold-überzogenen RCA-KonnektorenDC-Eingang 5,5 / 2,1 mmFull-HD-Audio – bis zu 24 Bit/192 kHz-WiedergabeDer I-Sabre V3 von Audiophonics ist ein sehr hochqualitativer DAC, der auf dem ES9023b Digital-zu-Analog Konverter Chip basiert, welcher sich bereits in der dritten Generation befindet. Der DAC wird einfach auf den Raspberry Pi aufgesteckt, somit ist kein Löten erforderlich.Dieser DAC macht vieles anders: So hat der I-Sabre einen temperaturkompensierten Oszillator mit an Board, sitzt etwas höher auf dem Raspberry Pi, so dass sich alle wichtigen Ausgänge auf der selben Seite befinden. Wie auch die DC-Buchse für den Sabre, denn der Sabre ist der erste DAC in unserem Sortiment, der eine eigene Stromzufuhr benötigt. Sobald er mit einer eigenen Stromzufuhr betrieben wird, kann er auch andere Geräte mit Strom versorgen. SPECIFICATIONS Product type Streamer Inputs 4x USB-A 1x Micro SD slot 1x RJ45 1x Stereo RCA 1x HDMI 2x 12VDC 1.25A Raspberry Pi - DAC Module Audiophonics I-Sabre V3 ES9023TCXO Screen Tactile 7 Official Raspberry Pi screen Supported sampling rate PCM up to 24bit 192kHz Dynamic range 112dB GENERAL Power supply 6V 3A via Jack DC 5.5/2.1mm (power supply) Housing material Aluminium Dimensions 200 x 95 x 230mm Rear dimensions 175 x 55mm Weight 0.9kg Color Black _gsrx_vers_1516 (GS 9.3 (1516))