For sale a Technics SL-110 turntable in excellent condition. Turntable works properly and keeps speed well, no issues. There are a strobe assembly with its original packaging, 45rpm adapter and tube of the motor oil and original manual. The pictured SME 3009 tonearm is NOT INCLUDED in this sale. Description (from website): An armless player system composed of SL-110 without the tone arm. A DC motor with ultra-low-speed electronic control is used for the motor. It is free from fluctuations in power supply voltage and power supply frequency, and large torque can be obtained with a small amount of electric power. This motor has an inertial mass of 320 kg ? cm.2Turntable reaches normal speed at 1/2 turn, and quick start is also available. The turntable is made of die-cast aluminum 35 cm in diameter and 2.0 kg in weight. The dynamic balance of each part is precisely adjusted, and the speed can be finely adjusted with a strobe. The motor, turntable and player case are made of die-cast aluminum, and the total weight reaches 13.5 kg. Since the arm base is fixed with screws, it can be attached and detached. The body is supported by four legs with built-in insulators to cut off external vibration, and the height can be adjusted by turning these legs. The output terminal is a pin-jack type. Dust cover is included. Arm panel (wood), strobe light and wood base were sold separately as options. Specifications: Type Direct drive player system Turntable 35 cm Aluminum Die-cast, 2.0 kg Inertial mass 320 kg / cm2 Motor Ultra-low speed electronic commutator motor Number of revolutions 33 1/3, 45 rpm Rotational frequency switching system Electronic control system Fine adjustment of rotational speed By electronic control system Rotation speed independent adjustment Rotational speed adjustment range + / - 5 per cent Wow flutter 0.03% or less (W. R. M.S.) Signal-to-noise ratio 60 dB or more Bootup Normal operation at 1/2 rotation (33 1/3rpm) Pwer 110 - 240V VAC, 50Hz/60Hz Power consumption 4.0W External dimensions Width 510x Height 195x Depth 390 mm Weight 13.5kg Check my other ads for more high quality vintage electronics.

Get ready to enjoy your vinyl records with this ION Audio iTTUSB10 turntable. The sleek silver design matches any decor, while the USB 2.0 connectivity allows for easy digital conversion of your favorite albums. This belt-drive turntable features headphone and stereo L/R RCA audio outputs, as well as speed settings for both 45RPM and 33.3RPM vinyl. With a CD recorder, you can now easily create digital copies of your favorite albums and enjoy them on the go. The headphone jack and features like belt drive ensure that you have a smooth and seamless listening experience. This turntable is perfect for any music enthusiast who values quality and style.

ADDITIONAL IMPORTANT NOTES (PLEASE READ): Please review all photos, read item descriptions carefully and please contact me with any questions that you have before bidding. Most items are used, vintage, and sold as-is unless stated otherwise. All sales are final.Payment via Paypal only and expected within three (3) days of the invoice. Items ships to the Paypal confirmed, US addresses only. Please note that handling may take up to two days, but will more than likely be sooner than that. I DO COMBINED SHIPPING FOR (MAGAZINES VHS BOOKS DVDS OR MUSIC CD ) IS A DOLLAR EXTRA PER ITEM .

ION Audio iTTUSB10 Turntable FOR RECORDING RECORD TO DISC ESTATE ITEM. NO COVER. COVER WAS DAMAGED IN MOVING TURNTABLE EXCELLENT..tested/COMES WITH 4 NEW NEEDLES

please take a look at other pioneer parts I have listed Original Pioneer Turntable Headshell SME Fit for PL-100 PL-200 PL-300 PL-400 in excellent condition

Technics SL-110 legendary direct drive turntable, classic design and very beautiful to watch, with SME 3009II Improved tonearm fitted, also fitted with the SME F. D. 200 fluid damper, and re-wired with Cardas AWG33 very fine wire to the cartridge. There isnt a cartridge included. The condition is excellent. I bought this new in 1975 from Berkshire HiFi near Reading. I went there with the intention of buying the new Linn LP12 but they had sold out ! Luckily for me.The Technics was 3 times the price of an LP12 system, so I was dubious until they told me that Robin Ray had bought an identical Technics setup the week before, so... Years later I added the Fluid Damper and re-wired the tonearm.

TECHNICS SL-110 MONSTER JAPANESE TURNTABLE with SME 3009 TONEARM + LID + STROBE + RECORD CLAMPlegendary lp playback systemamazing build qualityoversized strobe platterwooden armboardoriginal lift off lidsold in good working order as pictured* no cartridge included *collection welcome from our high street music shop in South Devonor worldwide shipping as listedplease note we can not ship to the USAany USA bids will be cancelled, sorry !

superb turntable and 3009 tonearm is in superb conditionand perfect working order with ortofon stylus

Condition DescriptionCondition: Used Tested External dimensions (approx.): W530 x H178 x D442 mm Weight: Approximately 7kg Hole for tone arm: Approximately 32 x 70 mm Hole core for tone arm from spindle: Approximately 220 mm ? Accessories ? Armboard ? Dust cover * All accessories and accessories are shown in the image. Please check it. ? State The dust cover has scratches / scratches, but it also has a sense of transparency. The cabinet has a rectangular mark on the front / Kusumi / There are no noticeable large scratches. The hinges can also be kept open. Please Note shipping from Japan. Policy PaymentWe can shipping only registered address on ebay. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.ShippingI send a product by EMS(Japan Post) or International Priority(FedEx). I will determine the required shipping company depending on the situation. I attach the tracking number. Please bid it without worrying. Shipping is only available to the address registered in Paypal. Please note that any address not registered in Paypal is not acceptable to ship. Shipping is available from Monday to Friday. Weekends are not available because post office is closed.Terms of SaleImport duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to Unconditional Return Policy Customer service and satisfaction are very important to us. I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition. All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.International BuyersImport duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.

Unicover Acrylic Turntable Dust cover for SME Model 10 & Avid models - Universal Very High Quality Cover excellent condition (save for some scratches on the inside panel where an arm has touched the frosted back panel - see pictures) internal dimensions: 41cm x 35cm, and 18cm high (dont forget the corners are curved - see pictures)

SME 10 TURNTABLE WITH arm   SME 10 TURNTABLE WITH arm                        Get images that make Supersized seem small. THE simple solution for eBay sellers.

Stunning laser cut designer turntable perspex cover. Made from quality 4mm Acrylic. These are perfect replicas of your Turntable & Tonearm. Designed over many many painstaking hours with CAD. The result is stunning, even more so when a light is shone through the top edge ???? The bespoke cover is ONLY available from us ???? VERY Limited quantities available Thank you for looking...

Stunning laser cut designer turntable perspex cover. Made from quality 4mm Acrylic. These are perfect replicas of your Turntable & Tonearm. Designed over many many painstaking hours with CAD. The result is stunning, even more so when a light is shone through the top edge ???? The bespoke cover is ONLY available from us ???? VERY Limited quantities available Thank you for looking...

Stunning laser cut designer turntable perspex cover. Made from quality 4mm Acrylic. These are perfect replicas of your Turntable & Tonearm. Designed over many many painstaking hours with CAD. The result is stunning, even more so when a light is shone through the top edge ???? The bespoke cover is ONLY available from us ???? VERY Limited quantities available Thank you for looking...

SME 10 TURNTABLE & Power No 309, IV Or V Tonearm Included) New Cover Available ???? By negotiation. Hardly Used, in superb condition except for 2 very small Imperfections to the Platter. Power supply is mint as is the rest of the turntable. SME will refurb a Platter if it bothers you but the rim could be made perfect with a little TLC touch up and spray. Though it really is minor. Once a Vinyl is spinning and your lost in the music it’s not noticeable anyway. It is shown with a tonearm but I am selling without. If you need a tonearm I have various options available, 3009, Series 3 (Silver wired) 309, Series IV and Series V. Buy the turntable and we can fine tune with a tonearm and a cartridge and Phono stage if you need a full set up ? The bespoke cover is available at £279 Cash on collection ONLY please from Grimsby, North east lincs. Other High end SME decks available too Thank you for looking...

Condition DescriptionCondition: Used Tested External dimensions (approx.): W530 x H178 x D442 mm Weight: Approximately 7kg Hole for tone arm: Approximately 32 x 70 mm Hole core for tone arm from spindle: Approximately 220 mm ? Accessories ? Armboard ? Dust cover * All accessories and accessories are shown in the image. Please check it. ? State The dust cover has scratches / scratches, but it also has a sense of transparency. The cabinet has a rectangular mark on the front / Kusumi / There are no noticeable large scratches. The hinges can also be kept open. Please Note shipping from Japan. Policy PaymentWe can shipping only registered address on ebay. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.ShippingI send a product by EMS(Japan Post) or International Priority(FedEx). I will determine the required shipping company depending on the situation. I attach the tracking number. Please bid it without worrying. Shipping is only available to the address registered in Paypal. Please note that any address not registered in Paypal is not acceptable to ship. Shipping is available from Monday to Friday. Weekends are not available because post office is closed.Terms of SaleImport duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to Unconditional Return Policy Customer service and satisfaction are very important to us. I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition. All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.International BuyersImport duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.

superb turntable and 3009 tonearm is in superb condition

please take a look at other pioneer parts I have listed Original Pioneer Turntable Headshell for PL-100 PL-200 PL-300 PL-400 in excellent condition

Technics SL-110 legendary direct drive turntable, classic design and very beautiful to watch, with SME 3009II Improved tonearm fitted, also fitted with the SME F. D. 200 fluid damper, and re-wired with Cardas AWG33 very fine wire to the cartridge. There isnt a cartridge included. The condition is excellent. I bought this new in 1975 from Berkshire HiFi near Reading. I went there with the intention of buying the new Linn LP12 but they had sold out ! Luckily for me.The Technics was 3 times the price of an LP12 system, so I was dubious until they told me that Robin Ray had bought an identical Technics setup the week before, so... Years later I added the Fluid Damper and re-wired the tonearm.

Unicover Acrylic Turntable Dust cover for SME Model 10 & Avid models - Universal Very High Quality Cover excellent condition (save for some scratches on the inside panel where an arm has touched the frosted back panel - see pictures) internal dimensions: 41cm x 35cm, and 18cm high (dont forget the corners are curved - see pictures)

Luxman PD300 Turntable, Record Player, Record Deck, Sophisticated Vacuum Pump PlatterWill not split combination. Alphason HR100S Transcription Arm, Tone Arm, Transcription Arm Very clean condition, High end audio quality, Hearing is believing. For those who dont know: £250 is all it costs for Alphason to re wire the HR 100S with OCC wiring, add new interconnects and give it a full service. This expert upgrade by the manufacturer guarantees performance extremely close to that of the latest HR200S. Careful owner with a smoke free home since 1983PD 300 price when new: 160000 Yen Original manuals and some (NOT ALL) original packing and Alphason invoice are includedCollection in person from London NW6 preferred Welcome to test all functions before buying.Im happy to leave the unit switched on for 24 hours before testing.Its been rarely used but never left for excessive periods without use.I changed the belt once with one sent by Luxman Japan. I ordered two belts so the other new one is included in this sale. PAY PAL IS NOT ACCEPTED - EXCEPT VIA THE FRIENDS AND FAMILY OPTIONDELIVERY PRICES IN THIS LISTING ARE ESTIMATES If a buyer pays via bank transfer and books the delivery to their address Im happy to pack to whatever standard is required, including timber crate, or box in a box.print labels and customs declarations and deliver the package to my local UK Parcel Force or UPS collection office. Packing charge depends on the standard of packing requested by the buyer.A timber crate is more expensive than cardboard boxes. Obviously this once came from Japan in a carton. Sending it padded in a cardboard box involves a risk of damage in transit that should be insured against.Some shipping sites, for example Parcel2Go, do not offer any insurance for damage to electronics at all. To get valid insurance cover bookings have to be made directly via Parcel Force or UPS (NOT with PARCEL2GO)Because of the age of the item I cannot give a warranty. TO GET DELIVERY QUOTES CHECK PARCEL2GO.COM ENTER APPROXIMATE SIZES & WEIGHT & BUYERS AND SELLERS POST CODE (LONDON NW6)

Technics SL-110 legendary direct drive turntable, classic design and very beautiful to watch, with SME 3009II Improved tonearm fitted, also fitted with the SME F. D. 200 fluid damper, and re-wired with Cardas AWG33 very fine wire to the cartridge. There isnt a cartridge included. The condition is excellent. I bought this new in 1975 from Berkshire HiFi near Reading. I went there with the intention of buying the new Linn LP12 but they had sold out ! Luckily for me.The Technics was 3 times the price of an LP12 system, so I was dubious until they told me that Robin Ray had bought an identical Technics setup the week before, so... Years later I added the Fluid Damper and re-wired the tonearm.

Condition DescriptionCondition: Used Tested External dimensions (approx.): W530 x H178 x D442 mm Weight: Approximately 7kg Hole for tone arm: Approximately 32 x 70 mm Hole core for tone arm from spindle: Approximately 220 mm ? Accessories ? Armboard ? Dust cover * All accessories and accessories are shown in the image. Please check it. ? State The dust cover has scratches / scratches, but it also has a sense of transparency. The cabinet has a rectangular mark on the front / Kusumi / There are no noticeable large scratches. The hinges can also be kept open. Please Note shipping from Japan. Policy PaymentWe can shipping only registered address on ebay. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.ShippingI send a product by EMS(Japan Post) or International Priority(FedEx). I will determine the required shipping company depending on the situation. I attach the tracking number. Please bid it without worrying. Shipping is only available to the address registered in Paypal. Please note that any address not registered in Paypal is not acceptable to ship. Shipping is available from Monday to Friday. Weekends are not available because post office is closed.Terms of SaleImport duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to Unconditional Return Policy Customer service and satisfaction are very important to us. I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition. All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.International BuyersImport duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.